SPECIAL REPAIR AND ADDITION / ALTERATION AT 6TH FLOOR OF ADELPHI BUILDING CSD HO AS DEPOSITE WORKS UNDER GE (WEST) COLABA

Amount

Dismantling of floor hearth/wall tiles including cement mortar bedding (but not backing) and removing serviceable tiles out side of MD land all as specified and directed.

M&L for first and premium quality Anti skid, HD ceramic digital “coloured” glossy/matt finish joint less tiles of size 300 x 300 x 6-7mm or thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of the tiles over and including 15mm thick screed bed or bedding layer in CM 1:6 all as specifed and directed. Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.

M&L for first and premium quality of HD Glazed ceramic coloured digital tiles 600 mm x 300 mm or 405 mm x 250 mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps, etc set and jointed in neat cement slurry, and pointed in coloured cement to match the shades of the tiles laid over and including 10mm thick rendering or backing layer in CM 1:4 all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.

M&L for Vitrified tiles dark shade 600 x 600 x 10-12 mm thick (square/ rectangular) polished, size of each tiles in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shed of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 all as specified and directed. Make : Johnson tiles / Kajaria / Orient Bell, Sample as approved By GE.

M&L for Vitrified tiles dark shade 10-12 mm thick cut to size (square/ rectangular) polished, on vertical surface, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles, laid over and including 10mm thick rendering or backing layer in cement mortar 1:4 all as specified and directed. Make : Johnson tiles / Kajaria / Euro, Sample as approved By GE.

Dismantling wall and ceiling boards or insulation boards, of any thickness, any description, including cover fillets all as specified and directed.

M&L for POP ceiling including cornice of POP any design/ pattern fixed on anodised snap grid frame work for false ceiling with size of grid 605x605mm consisting of main and cross tee of size 36.5 x 25 x 1.4 mm (wt 0.24kg/RM) and 23.5 x 26.4 x1.4mm (wt 0.191kg/ RM) respectively including aluminum angle 25x25 1n4 mm & provn of hangers of GI wire of 2mm dia and providing painting with two coats of synthetic enamel paint over a coat of primer on surface all as specified and directed by Engineer-in-Charge.

S&F Aluminium composite panel sheet 3mm thick PVCF wooden finished of brand name 'Euro bound'/"Alstrong"./ "Viva" fixed with necessary aluminium tube of size 25mm x 38mm x 1.5mm thick with required silicon & screw as in ceiling/columns, shutters and in vertical surface including stainless steel hinges all as specified and directed.(approved sample as kept in GE Office.)

S&F 12 mm thick plywood, grade BWP type BB fixed with brass screws and cups to timber frame work all as specified and directed : (sample as approved by GE.)

M&L Decorative laminate 1.5 mm thick type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed by engr in charge

S&F 2 mm thick veneered desinger natural wood grain sheet fixed with adhesive as per manufactrue instruction to plywood work all as specified and directed. (Sample as approved by GE)

S&F for Plain fillets of second class hard wood, square or rectangular in section, clean sawn, wrought, secured with nails or brads; sectional area exc 6 Sqcm but not exc 13 Sqcm all as specified and directed. (Sample as approved by GE.)

M&L for French polishing on new / old wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats through authorised applicators of paint manufacturers only of approved shade all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints.

M&L for Anti-termite treatment of voids in masonry using chemical emulsion one litre per hole, at 300 mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors all as specified and directed.

S&F 18 mm thick marine plyboard laminated of any colour with high class glossy acrylic sheet of 3 mm thick grade I as per IS 14587 for frame and shutter for kitchen cabinet all as specified and directed.

S&F medium weight, cold rolled mild steel, SS finish (Partial overlay/fully overlay of any type) diameter of cup 35mm, Hinge cup depth 11.5mm, self-closing all as specified and directed. Make : Godrej Kitchen fittings or equivalent in Sleek by Asian Paints

S&F stainless steel 304 electro-polished for corrosion resistance modular thali holder/basket having size of 42 x 58.5 x 20 cm including telescopic drawer channel having weighing capacity of 6 kg all as specified and directed. Make : Cat Part No 5704 Godrej Kitchen fittings or equivalent in Sleek by Asian Paints

S&F stainless steel 304 electro-polished for corrosion resistance modular cup & saucer holder/basket of size 52 x 53.5 x 10 cm with telescopic drawer channel having weighing capacity of 4kg all as specified and directed. Make : Cat Part No 5837 Godrej Kitchen fittings or equivalent in Sleek by Asian Paints

S&F round stainless steel 304 grade 200 mm length cabinet/drawers handles all as specified and directed. Make:- Godrej Kitchen fittings and Sleek by Asian Paints

S&F stainlesss steel modular perforated cutlery basket SS 304 of size 52x48.5x10 cm with telescopic drawer channel having weighing capacity of 6 kg all as specified and directed. Make Godrej kitchen appliances or equivalent.

S&F grain trolley SS 304 with telescopic drawer channel having weighing capacity of 6 kg all as specified and directed.

S&F stainless steel 304 grade of size 180x515x585 mm pull out detergent/spice rack having three shelf with telescopic drawer channel having weight capacity 6 kg all as specified and directed. Make Godrej kitchen appliances or equivalent. Cat part No ASSSPO160510585

S&F in repairs butt hinges cast brass with, bright polished and fixed type B-11 of size 100mm all as specified & directed.

S&F in repairs 150 mm extruded brass handles, fabricated type polished all as specified & directed.

S&F in repairs brass barrel tower bolts of extruded section 200 mm long all as specified & directed.

S&F in repairs 300mm long brass sliding door bolts with sand or die-cast brass hasp staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed all as specified and directed.

S&F brass classic cylindrical lock with 3 numbers of keys and 60 mm back set all as specified & directed. Make : Godrej / Harrison / link

S&F anti rusting stainless steel cloth drying hanger made of 16 mm dia hollow stainless rod, 8 feet x 4 rods set for heavy duty including fixing on ceiling with metal roof clamps all as specified and directed. Make: Unik cloth dry hanger/ Easy dry or equivalent as approved GE.

S&F in repairs Stainless steel plate rack (utensil rack) of size ( 1100 mm x 900 mm) and depth 300 mm made with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts all as specified and directed.

S&F magnetic catches with steel body ‘H’ type, fixed to shutter all as specified and directed.

S&F in repairs SS Matt finish megnatic door stopper all as specified and directed.

M&L for designer Shower enclosuser of toughened Glass 8 mm including stainless steel accessories like hinge/ floor machine, handle, clamps and clips etc (make jaguar cat part No RITZ R1840W or equivalent )all as specified and directed.

S&F in repairs Spring Polyester Roller Blinds spring component easy for using, once touch up the second pull stop, can stay any positions as you want, spring strength can be adjusted by a key with hanging rails, mounting bracket, spring, weight including all accessories and required hard ware in different size of window indifferent rooms all as specified and directed. Make and sample approved by GE.

S&F in repairs 25 mm dia mild steel chromium plated desinger drapery/ curtain rod with fixing bracket, stop, roller included all as specified and directed.

M&L for Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish all as specified and directed,

M&L Granite (of any type and size) 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over 15mm thick screed bed in CM 1:4 on kitchen platform, Cill of Window/Ventilator/ flooring/border including rubbing, grinding and polishing all as specified and directed

Molding (Sandwitch moulding) of granite slab edges as directed by Engr-in-charge including polishing all as specified and directed.

M&L 20-25 mm thick machine cut cudappa stone slab in horizental/vertical jambs laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing & rounding to edges of slab as in window cills/jambs including screed bedding 10mm thick in CM 1:6 all as specified and directed by Engineer-in-charge..

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles including removing debris out side MD land complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean raddius built in CM 1:6 all as specified and directed.

M&L Brick work with sub class 'B' brick straight or curved on plan in any raddius in half brick thick walls built in CM 1:4 all as specified and directed.

Taking down cement plaster on brick/stone or concrete surfaces including racking out joints, hacking for key, scrubbing down with water to receive plaster, including removing debris/rubbish materials off the site out side MD land all as specified and directed. Note : Height of Bldg Up to sixth floor.

Firstly old loose spelled concrete should be chiseled from roof ceiling with the help of scrapers chisel & hammer after that cleaning of rust from mild steel rod and applying cement spray 3.00 Kg per sqm by paint brush over cleaned surfaces and M&L 20-30 mm thick ready mix plaster in Multi layer for ceiling on fair faces of brick wall or concrete surfaces, finished surfaces even and fair all as spd and directed by Engr-in-charge

M&L 12 mm thick Ready Mix Plaster in single layer on other than fair faces of concrete surfaces in wall (internal surfaces) and finished surfaces even and smooth without using extra cement all as specified and directed. by Engr-in-Charge upto 6th floor. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/ or other approved equivalent make.

M&L for preparation of old/ newly plastered surfaces of wall/ceiling including removing old finishes and applying two coats of Plastic emulsion (Royal) Paint over a coat of alkali resistant primer over a coat of Birla Putty 1 mm thick through authorised applicators of paint manufacturers only of approved shade all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE.

M&L for preparation of old/ newly plastered surfaces of wall/ceiling including removing old finishes and applying two coats of oil emulsion distemper over a coat of alkali resistant primer over a coat of Birla Putty 1 mm thick through authorised applicators of paint manufacturers only of approved shade all as specified and directed Make: "Tractor Uno" of Asian Paints / "Jadoo"of Berger Paints / Nerolac Beauty of Nerolac paints as approved by GE.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided all as specified and directed.

M&L PCC 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) finishing surfaces even and rough to receive the tiles all as specified and directed.

M&L PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in bed blocks for hold fast complete all as specified & directed.

S&F mild steel bends strips, hold fast or small articles of FI or angle all as specified and directed.

Taking down chowkat with shutters (without taking off shutters from the frames ) area nexc 1.5 sqm each all as specified and directed.

Taking down shutters of any description area nexc 1 sqm each all as specified and directed.

Refixing shutters of any description of area nexc 1 sqm each in same openeing all as specified and directed.

Refixing chowkat with shutters (without taking off shutters from the frames ) area nexc 1.5 sqm each in same opening all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat comprising of 62 mm x 32 mm size applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length all as specified and directed

S&F factory made 28-30 mm thick single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size modulus of elasticity 850 N/mm” and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as specified and directed

S&F butt hinges cast brass with mild hinges pin, bright polished and fixed type B-11 of size 100mm all as specified & directed.

S&F 150 mm extruded brass handles, fabricated type polished all as specified & directed.

S&F brass barrel tower bolts of extruded section 200 mm long all as specified & directed.

S&F 300mm long brass sliding door bolts with sand or die-cast brass hasp staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F 150 mm long aluminium alloy handle cast type anodized all as specified and directed.

S&F 150 mm long aluminium anodized barrel tower bolt of extruded section all as specified and directed

S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge, pin anodized all as specified and directed.

S&F in repairs Stainless steel waste coupling for WHB and Urinal of 32 mm dia, set with rubber washer plug etc. all as specified and directed.

S&F in repairs sheet glass shelf assembly consinsting of 5.5 mm thick sheet glass shelf 12 cm wide with CP bracket guard and railing 60 cm long all as specified and directed.

S&F in repairs Aluminium anodised handles of extruded section 125 mm long all as specified and directed.

S&F in repairs Aluminum, anodized, barrel tower bolts of extruded section 100 mm long all as specified and directed.

S&F in repairs aluminium alloy, anodised, sliding door bolt 300mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy all as specified and directed.

S&F in repairs butt hinges medium weight, cold rolled mild steel 100mm size fixed with necessary screw or welding as required all as specified and directed.

S&F in repairs butt hinges medium weight, cold rolled mild steel 75mm size fixed with necessary screw or welding as required all as specified and directed.

S&F powder coated aluminium sections for doors, windows, ventilators, door partition including fabrication of frame shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement including all accessories such as glazings clips, and rubber beadings for fixing glass panes in frame all as specified and directed. Note : (i) Glass panes will be measured & paid separately . (ii) The quoted rate shall be inclusive of cost of rubber beading however it will be not be weighted and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. (iv) Windows all around will be sealed with silicon sealant.

S&F ACP sheet for doors including all necessary fittings all as specified and directed .

M&L 3mm thick sheet glass Figured glass, pin head type and glazing with oil putty in square n-exc 0.5 sqm in each pane all as specified & directed.

M&L 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane all as specified & directed.

M&L 5.5 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane all as specified & directed.

S&F aluminium grill of 6mm bars of opening as per design/pattern No DG No 916 of M/s Decogrille/ RG-103 of M/s Royal Grill fixed with aluminium channel 'F ' 20mmx15mm fixed in position with screw all as specified and directed.

S&F in repairs galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple all as specified & directed.

S&F in repairs vitreous china wash down water closet of Pedestal pattern white including making connection to trap and to flushing pipe and making good to floor all as Specified and directed. Make : Cera/ Parryware/ Hindware sample as approved by GE

S&F in repairs vitreous china Wall Hung WC Rimless Bowl With Cistern and PP Soft Close Seat cover, Hinges, Dual Flush Cistern Fitting, Accessories Set, Size: 380x650x730 mm brown or any colour as decided by Engr in charge including making connection to trap and to flushing pipe and making good to floor all as Specified and directed. Make : Jaguar Model no FLS-WHT-5353PPZ or equivalent

S&F in repairs Shower including pipe all as specified and directed. Make : Jaguar Model No OHS- CHR 1605 or equivalent

S&F in repairs Health foucet including PVC pipe 1.50m long with brass nuts for EWC all as specified and directed. Make : Jaguar Model No ALD577 or equivalent

S&F in repairs Stainless steel sink 1.00 mm thick for kitchen, with plug, waste pipe, washers including cantilever cast iron bracket, connecting union over all size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm all as specified and directed.

S&F in repairs vitreous china cream Countertop wash basin size 425 x 340 x 175 mm excluding taps, waste, chain, and plug but including brackets & cutting for and pinning in end of brackets or erecting stand or neccessay fixing accessories all as Specified and directed. Make : Jaguar Model No CNS WHT 903 or equivalent

S&F 40 mm Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm as in drain and waste pipes all as specified and directed.

Taking up or down steel tubing and connections 15 mm bore, including cleaning for refixing or removal all as specified and directed

S&F GI tubing medium grade 15mm bore laid to walls and ceiling or laid in floors all as specified and directed

S&F UPVC pipes out side dia 16 mm of pressure rating 10 Kgf/Sqcm, fixed to walls, ceilings or in floors all as specified and directed

S&F in repairs 15mm dia Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed. Make jaguar cat part no QHT CHR 7215 or equivalent

S&F in repair for pillar taps cost copper alloy fancy type with capstan head, chromium plated screwed down high pressure with or fly nuts screwed for 15 mm bore iron pipe and fixed all as Specified and directed. Make : Jaguar, Model No FLR 5347SD or equivalent

S&F in repairs Chromium plated brass angle valve for 15mm bore pipe all as Specified and directed. Make : Jaguar Model No FLR 5053N or equivalent

S&F in repairs, Concealed angle valve cock chromium plated brass fancy type bore 15mm all as Specified and directed. Make : Jaguar Model No FLR 5083NK or equivalent

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450 mm all as specified and directed.

S&F in repairs 15 mm dia bib taps cast copper alloy with Chromium plated screwed for iron pipe or upvc pipe or for brass ferrule and fixed all as specified and directed Make Jaguar model no FLR - 5047 N or equivalent

S&F in repairs brass CP towel ring with all necessary fittings all as specified and directed. Make Jaquar Model No AQN-7721 or equivalent

S&F in repairs brass chromium plated tubular towel rail 20 mm dia, D type 60 cm long, between flanges fixed all as specified and directed.

S&F in repairs SS Toilet paper holder with SS flip including all necessary fittings complete all as specified and directed. Make Jaguar model no AKP35753PS or equivalent

S&F in repairs SS grab bar 450 mm long including all necessary fittings all as specified and directed. Make Jaguar model no AHS1503 or equivalent

S&F PVC (SWR) 75mm bore bends of any radius all as specified and directed.

S&F PVC (SWR) 110mm bore bends any radius all as specified and directed.

M&L in repairs PVC nahani trap with grating 75mm dia outlet jointed to waste pipe fixed in cement concrete type (1:2:4) all as specified and directed.

Dismantling of PVC (SWR) pipe, any dia and any location all as specified and directed.

S&F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall all as specified and directed.

S&F PVC (SWR) 75mm bore pipes single socketed in any length with rubber ring joints fixed to wall all as specified and directed.

S&F in repairs 18 mm thick Both Side pre laminated HDHMR Board of any colour, Matt surface finish, grade I as per IS 14587, for frame and shutter for kitchen cabinets/ vanity with all necessary fittings like ss hinges, brass, handles and magnets all as specified and directed. Make:- ActionTesa/ Greenply and archidply

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and to deposit all item to CSD store yard or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling all as specified and directed.

M&L Point wiring (concealed type) with 1.5 sq mm, PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including rigid non-metallic PVC heavy duty conduit (ISI mark), 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for concealed boxes and for concealed conduit wiring with all fittings and accessories including modular cover plates as required with and fix conecaled 1.2 mm thick pressed steel modular sunken box, suitable for fixing moduler switch socket and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly and making good to the disturbed surfaces to match the existing surfaces complete (fill up cement in gaps, finishing with putti and apply two coats of paint, to match with existing colour in disturbed surface area), as per IS specification and as specified in SSR Part-I complete for one light point controlled by one modular switch, 1 way 6/10 amps, 1 module. Make of Cable/ Wire : Anchor / Havells / Polycab

All as per item No. 108 here in before but for bell point controled by one bell push. Make of Cable/ Wire : Anchor / Havells / Polycab

All as per item No. 108 here in before but for Ceiling Fan controled by one switch. Make of Cable/ Wire : Anchor / Havells / Polycab

All as per item No. 108 here in before but for Exhaust Fan controled by one switch. Make of Cable/ Wire : Anchor / Havells / Polycab

All as per item 108 here in before but for socket outlet point 5 Amp on same board. Make of Cable/ Wire : Anchor / Havells / Polycab

All as per Srl item No.108 here in before but for socket outlet point 5 Amp on Independent board. Make of Cable/ Wire : Anchor / Havells / Polycab

All as per serial item No 108 above but with 2.5 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) all as specified and directed. Make of Cable/ Wire : Anchor / Havells / Polycab

All as per item No 108 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) all as specified and directed. Note: Earthing wire should also be of 4 sqmm. Make of Cable/ Wire : Anchor / Havells / Polycab

S&F modular switch 1 way 10 A module 230/250 volt, AC supply, ISI Marked, with white cover plate with frame all as specified and directed. Make: Anchor (Roma)/ Legrand / Havells

S&F modular switch 1 way 16 A module 230/250 volt, AC supply, ISI Marked, with white cover plate with frame all as specified and directed. Make: Anchor (Roma)/ Legrand / Havells

S&F modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate all as specified and directed. Make: Anchor (Roma)/ Legrand / Havells

S&F modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz, AC supply, ISI Marked, with white cover plate with frame all as specified and directed. Make: Anchor (Roma)/ Legrand / Havells Reo

S&F in repairs Modular type AC Box, 4 Module with Socket and 25 Amp SP mini MCB in plastic box enclosure along with cover plate and top all as specified and directed. Make : Anchor Model No : 98498 or equivalent model in Havells/ Legrand/ Anchor (Roma).

S&F modular bell push 1 way 6 A module 230/250 volt, AC supply, ISI Marked, with cover plate all as specified and directed. Make: Anchor (Roma)/ Legrand / Havells

S&F call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand.

S&F modular Fan step/ electronic regulator, 120W - 2 module A module 230/250 volt, AC supply, ISI Marked, with cover plate all as specified and directed. Make: Anchor (Roma)/ Legrand / Havells

S&F ceiling rose surface bakelite 65x50mm, 3 terminal all as specified and directed. Make : Cona , Plaza, Anchor .

S&F LED 18 Watt 6500 K, Slim raccess mounted LED panel 1x1 with premium diffuser to ensure glare free & even light distribution, with integrated electronic driver of same make connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified and directed. Make - BAJAJ/Havells / Wipro/ Jaguar.

S&F ceiling fans complete with blades, down rods of required size, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 225 CFM with service value 6.00 BEE. Five star rated with scquireel cage induction motor. Note: Connection should be made neatly using two core flexible cable. Make: Havells ENTICER ART ES or equivalent make of Bajaj/Crompton Greaves.

S&F LED Batten lights fitting 1x 20W, 220V, AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete pre wired fixed to wall with 2 nos PVC block of suitable size all spcifided and directed. Make : Wipro GARNET 6500 K or equivalent make of Havells/ Bajaj. Note: Connection should be made neatly using two core flexible cable.

S&F in repairs LED Mirror light fittngs 20 watt extruded polycarbonate, 2 feet integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size all as specified and as directed. Make- Havells Glamtube 20 watt or equivalent make of Philips/ Jaquar.

S&F in repairs Exhaust fan 230 volt, 300 mm metal body ISI marked conforming to latest edition IS-2312 with wooden frame including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good to disturbed surface of wall and outer wooden box for fan fix on wall. Make : Bajaj Freshee 300mm or equivalent make of Havells/ Crompton Greaves.

S&F in repairs Exhaust fan 230 volt, 250 mm sweep, plastic body with wooden frame including making all electric connection all as specified and as directed including cutting of hole on wall and makng good to disturbed surface of wall and outer wooden box for fan fix on wall including taking down old exhaust fan and deposit to CSD maintenance store safely without any damage. Make Bajaj Maxima DXL or equivant make of Havells/ Crompton Greaves.

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated with all accessories such as safety valve, thermostate, NRV, connection piece Make Racold CDR DLX or equivalent make of Bajaj/ Havells.

S&F in repairs decorative bed light fitting with goose neck led light, working on 240 volts, 50 hz, fittings comprising with stainless steel finish fixture including with opal glass diffuser and with LED bulb of capacity 7 watt all as specified and directed. Make : Jaquar, Cat Part No DWL-CHR-MB12021192B/DWL-CHR-MB12021192A or equivalent in Philips / Havells sample as approved by GE.

S&F in repairs LED wall light fittngs 20 watt extruded polycarbonate, 2 feet integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size all as specified and as directed. Make- Havells Aurora Glamtube 20 watt 4000K or equivalent make of Philips/ Jaquar.

S&F in repairs decorative wall mounting fitting 2 light opal frosted glass, working on 240 volts, 50 hz, fittings comprising with stainless steel finish fixture including with opal glass diffuser and with LED bulb of capacity 7 WATT all as specified and directed. Make : Jaquar, Cat Part No KCH-CHR-MB160275532B/DWL-CHR-MB160275542A or equivalent in Philips / Havells /Wipro / sample as approved by GE

S&F in repairs decorative ceiling light fitting, working on 240 volts, 50 hz, fittings comprising with stainless steel finish fixture including with opal glass diffuser and with LED bulb of capacity 7 watt all as specified and directed. Make : Jaquar, Cat Part No Code: DPN-RDG-MD160030111A or equivalent in Philips / Havells Wipro / sample as approved by GE

S&F in repairs goose neck wall mounting fitting, working on 240 volts, 50 hz, fittings comprising with stainless steel finish fixture including with opal glass diffuser and with LED bulb of capacity 3 WATT all as specified and directed. Make : Jaquar, Cat Part No DWL-CHR-LBED01R003XW or equivalent in Philips / Havells sample as approved by GE

S&F in repairs outdoor wall light fitting, working on 240 volts, 50 hz, fittings comprising with stainless steel finish fixture including with opal glass diffuser and with LED bulb of capacity 7 watt all as specified and directed. Make : Wipro DW21227 or equivalent in Philips / Havells sample as approved by GE

S&F Electrical kitchen chimneys 90cm with suction capacity 1250 m3/hr, copper winding motor, LED lights with all necessary connections including proper necessary ducting and attaching mesh at outlet. Make FABER HOOD EVEREST SMART IND HC SC BK 90, Filterless technology, Touch Control, Black or equivant make of Kutchina/ Hindware.

M&L refixing of ceiling fan (old fan) and connecting up including provision of cable from ceiling rose or connector and fan painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust with taking down fan, sealing cable end, dismantling romoving and hanging fan with rod of required length and proper hook and blades and removing fan and blades to store. Note: Connection should be made neatly using two core flexible cable.

S&F in repairs MCCB DB 6 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting all as specified and directed. Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .

S&F in repairs MCCB TPN, 240 Volts, 100 Amps, 16 kA rupturing capacity 415 Volts all as specified and directed including taking down old one all as specified and directed.

S&F in repairs MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 16 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down all as specified and directed. Make: Havells/Legrand/ Indo Asian

S&F in repairs MCB DP, 240 Volts, 40-63 Amps, 10 kA rupturing capacity 'C' series all as specified and directed. Make:- Havells/ Legrand/ Indo Asian.

S&F in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's all as specified and directed. Make : Legrand/ Indo Asian/ Havells.

Taking down carefully copper/aluminum submain wiring complete including all fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces all as specified and directed

Supply and laying sub main wiring (Concealed type) in repair, for AC Point/ DB to DB with two run of 4 sqmm stranded copper conductor wire (FRLSH) with one run of 4 sqmm stranded copper conductor as earth continuty conductor connected to common earth dolly including adequate size and including rigid non-metallic PVC heavy duty conduit (ISI marked), 19/ 20 mm dia suitable size including cutting chases for conduits all as specified and directed including taking out of old U/s sub main wiring of any size Note: Mode of measurement two runs of 4 sqmm cable and one run of 4 sqmm cable shall be measured as one length. Make of Cable : Anchor / Havells / Polycab

M&L for Sub main wiring in repair, with four run FRLSH of 25 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 25 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires for from Pannel / Main DB to house TPN/SPN DB including taking down old Unsv submain with all associated fixtures all as specified & as directed by engr-in-charge. Make : Finecab / Havells / Finolex as approved by GE Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement four runs of 25 sqmm cable and one run of 25 sqmm cable with PVC conduite shall be measured as one length. Make of Cable : Anchor / Havells / Polycab

SAHU AND SAHU CO.

Unitech Enterprises

Bidder Name

Unitech Enterprises

SAHU AND SAHU CO.

GANGAJAL