Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.8 LAccepted-AOC BAM GAON SILAPATHAR DIST DHEMAJI ASSAM | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹26.0 L+₹3.2 L (13.8%)Rejected-Finance | L2 | Rejected-Finance HIGER THAN LI BIDDER | |
| 3 | L3₹26.4 L+₹3.6 L (15.5%)Rejected-Finance AT ROAD NEAR RENUKA CINEMA P O DIST TINSUKIA ASSAM PIN 786125 | TINSUKIA | TINSUKIA | ASSAM | 786125 | L3 | Rejected-Finance HIGER THAN LI BIDDER | |
| 4 | L4₹26.6 L+₹3.7 L (16.4%)Rejected-Finance | L4 | Rejected-Finance HIGER THAN LI BIDDER | |
| 5 | L5₹27.2 L+₹4.4 L (19.1%)Rejected-Finance 1A 52 NETAJI SUBHASH NAGAR E M BY PASS SOUTH 24 PARGANAS WEST BENGAL 700100 | KOLKATA | WEST BENGAL | 700100 | L5 | Rejected-Finance HIGER THAN LI BIDDER |
Tender Value
₹26.4 L
EMD Value
₹52,900
Closing Date
16 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 872 EWS
GE 872 EWS, C/O 99 APO
PROVN OF CERTAIN MINOR WORKS AT DIFFERENT LOCATIONS OF LIKABALI MIL STN UNDER GE 872 EWS
2023_MES_614329_1
8536/T-36/E8
Open Tender
Civil Works
Item Rate
183 days
LIKABALI
All as per NIT and Tender documents
7 documents required · 7 mandatory
₹500
GE 872 EWS
₹52,900
Yes
4 Nov 2023
18 Aug 2023
18 Sept 2023
18 Aug 2023
16 Sept 2023
2 Sept 2023
18 Aug 2023 - 23 Aug 2023
Amount
B/R SERVICES/ WORKS
Surface Dressing not exc. 15 Cm in deep, getting out in Soft/ Loose Soil including Removing Grass, Vegetation, Saplings, Shrubs, Brush-wood, Undergrowth and Roots, Rubbish, Soil, etc., complete all as specified and as directed.
Excavation in Over Areas not exc. 1.50 Metre in depth and getting out as in Soft/ Loose Soil, complete all as specified and as directed.
Excavation in Over Areas exc. 1.50 Metre and not exc. 3.00 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed.
Excavation in Over Areas exc. 3.00 Metre and not exc. 4.50 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed.
Excavation in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in Depth for Foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in Depth and getting out as in Soft/ Loose Soil, complete all as specified and as directed.
Returning, Filling in including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm, in Soft/Loose Soil, complete all as specified and as directed.
Removing Excavated Materials (Soils), exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point, complete all as specified and as directed.
Excavating in Post Holes (or Similar Holes) in Soft/Loose Soil, each not exc. 0.50 CUM, getting out, Returning, Filling in and Ramming Earth or Broken Rubble mixed with Earth around in layers not exc. 25 Cm, Watering and Removing Surplus Soil to a distance not exc. 50.00 Metre and Making Good Surfaces, complete all as specified and as directed.
Excavating in Post Holes (or Similar Holes) in Soft/Loose Soil, each not exc. 0.50 CUM, getting out and Removing surplus Soil to a distance not exc. 50.00 Metre and Making Good Surfaces, complete all as specified and as directed.
M&L Sand (as approved) Filling under Floors, Foundations, etc. including Spreading and Levelling, etc., complete all as specified and as directed.
M&L Hardcore Broken Stone or Boulders, Gauge not exc. 63mm, Deposited, Spread and Levelled in Layers not exc. 15 Cm thick, Watered and Well Rammed to a True Surface, complete all as specified and as directed.
M&L Loose filling with Broken Stone Aggregates of Gauge 80mm to 150mm in Soakage Pits, Soakage Wells, complete all as specified and as directed.
M&L Cement Concrete 1:3:6 (20mm graded stone aggregate) in Surface Channels and Drains, etc. including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed. NOTE : Cost of Formwork will deemed to be included in the Quoted Unit Rate.
M&L Extra for Forming Fair finished Drain or Channel not exc. 30 Cm Inner Girth in Cement Concrete, using Extra Cement including Forms, Moulds, Stopped Ends, etc., complete all as specified and as directed.
M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregates) in Copings, Kneelers, Apex Stones, Bed Plates, Water Troughs and the Like including Weathering, Slightly Rounded or Chamfered Angles and Throating, Finishing all Exposed Faces of Concrete including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed. NOTE : Cost of Formwork will deemed to be included in the Quoted Unit Rate.
M&L Cement Concrete 1:2:4 (20mm graded stone aggregates) in Lintels upto 1.50 Metre Clear Span, Cills, Steps; Seismic and other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets and Railings upto 600mm in Height, Copings, Kneelers, Apex Stones, Bed Plates, Water Troughs and the Like including Weathering, Slightly Rounded or Chamfered Angles and Throating, Finishing all Exposed Faces of Concrete including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed. NOTE : Cost of Formwork will deemed to be included in the Quoted Unit Rate.
M&L Cement Concrete 1:3:6 (40mm graded aggregates) in Foundations, Filling and Mass Concrete, etc. including necessary Formwork, complete all as specified and as directed. NOTE : Cost of Formwork will deemed to be included in the Quoted Unit Rate.
M&L Cement Concrete 1:4:8 (40mm graded aggregates) in Foundations, Filling and Mass Concrete, etc. including necessary Formwork, complete all as specified and as directed. NOTE : Cost of Formwork will deemed to be included in the Quoted Unit Rate.
M&L Reinforced Cement Concrete 1:1½:3 (20mm graded stone aggregates) in Foundation including Raft, Footing, Foundation Beam for Column Basement Slab, under reamed Piles, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items.
M&L Reinforced Cement Concrete 1:1½:3 (20mm graded stone aggregates) Columns, Pillars, Piers, Posts and Struts, etc., complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items.
M&L Reinforced Cement Concrete 1:1½:3 (20mm graded stone aggregates) in Beams, Cantilevers, Bressummers, Lintels Over 1.50 Metre Span and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items.
M&L Reinforced Cement Concrete 1:1½:3 (20mm graded stone aggregates) in Slabs supported on Walls, Beams and Columns in Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs and in Shelves and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items.
M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Landings, Cover Slabs (for Manholes, etc.), Chullah Hoods, Chajjas, Water Troughs, Mangers, Shelves and Similar Articles with Plain faces and setting in Cement Morter 1:6, complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid for separately under appropriate Items.
M&L Pre-cast Reinforced Cement Concrete 1:2:4 (12.5mm graded stone aggregate) in Louvres and Jallies, 25mm thick (measured solid) with all mouldings including Reinforcement with 4.0mm dia Mild Steel Wire and setting in Cement Morter 1:4, complete all as specified and as directed. NOTE : Cost of Mild Steel Wire as Reinforcement will deem to be included in the Quoted Unit Rate.
M&L Formwork to Sides of Concrete Foundations, Footings, Bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of Foundation and Plinth Beams; and Similar Work; Vertical or to Batter, Rough Finished surfaces of Concrete Flat, complete all as specified and as directed.
M&L Formwork to Sides Pillars, Posts, Struts, Piers, Columns and Stanchions and Similar Work; Square or Rectangular, Rough Finished surfaces of Concrete, complete all as specified and as directed.
M&L Formwork to Sides and Soffits of Floor or Roof Beams, Girders, Beam Haunch-ings, Bress-summers, Lintels, Cantilevers, Shelves including Supports, Overhangs, etc. also splays between Floors and Beams, etc., Flat, Rough Finished surfaces of Concrete, complete all as specified and as directed.
M&L Formwork to Soffits of Suspended Slabs such as Roof Slabs, Floor Slabs, Landings and Similar Work; not exc. 200mm thick (Horizontal or Sloping, Rough Finished surfaces of Concrete Flat, complete all as specified and as directed.
M&L Machine Made & Pressed Pre-cast Cement Concrete Block Masonry with Solid Blocks 300x200x200mm or 300x200x100mm in Sizes, having Compressive Strength of not less than 100 Kg/ Sq Cm (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregate), exc. 10 Cm in width and setting in Cement Mortar 1:6, complete all as specified and as directed
M&L Machine Made & Pressed Pre-cast Cement Concrete Block Masonry in Honey Combing with Solid Blocks 300x200x200mm or 300x200x100mm in Sizes, having Compressive Strength of not less than 100 Kg/ Sq Cm (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregate), exc. 10 Cm in width and setting in Cement Mortar 1:4, complete all as specified and as directed
M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 40mm thick in Damp Proof Courses to Horizontal or Vertical Surfaces including Use & Waste of Formwork and Applying Evenly a coat of Blown type Bitumen @ 1.50 KG/SQM and blinding with Clean Dry Sand @ 0.05 CUM/SQM, complete all as specified and as directed.
S&F Solid PVC Door Frame of Size 50x47mm made out of 5.0mm thick Plain colour PVC Sheet Reinforced with Mild Steel Square Tube and fixing in Opening as per Specification and Drawing of MES Schedule, complete all as specified and as directed.
S&F Factory Made Solid PVC Moulded Door Shutter, 28mm to 30mm thick (Stiles), with 2, 4, or 6 Raised Panel design with 2.0mm thick Moulded PVC Sheet on the Front Face and 2.0mm Plain Colour PVC Sheet on Back Face, with Particle Board Core and fixing in Frame at Site as per Specifications & Drawing of MES Schedule, complete all as specified and as directed. NOTE : Builders Hardware will be Measured & Paid seperately under appropriate Items.
M&L Anodised Aluminium Powder Coated (Thickness of Powder Coating not less than 50 micron) Frame for Doors, Windows, Ventilators with One or More Rebates including Joining Cleat for fixing, etc., complete all as specified and as directed.
S&F Aluminium anodised Barrel Tower Bolt, 150mm long, Extruded Section, complete all as specified and as directed.
S&F Aluminium alloy anodized, Sliding Door Bolt 250mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Section and fixing Bolts and Sliding Bolts of Extruded Section, complete all as specified and as directed.
S&F Aluminium Butt Hinge of Size 75mm, complete all as specified and as directed.
S&F Aluminium anodised Handle of Size 150mm, Cast type, complete all as specified and as directed.
S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed.
M&L TMT Bars 10mm dia and Over, Cut to length, Bent to Shape required including Cranking, Bending Spirally for Hooping for Columns, hooking Ends and Binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.
M&L TMT Bars 8.0mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.
M&L Mild Steel Round Bars 16mm dia in Steps, Cut to length, Bent to Shape required, conforming to Gde I, IS-432 (Part-I), complete all as specified and as directed.
M&L Mild Steel Framed Brackets of Angles or Tees with Web and Flanges, cut to Shape, drilled and countersunk for Screw including bending and welding Angles as necessary, Gusset Plates, Riveting, etc., not exc. 10 KG Each Brackets, conforming to Fe-290, Gde E-165, complete all as specified and as directed.
M&L Framed Work in Doors or Gates of Angle or Other Section with Gusset Plates, Rails, Braces, etc., complete, drilled for fixing of Steel Sheeting or Other Covering. Doors, etc. to be prepared for Hanging or Sliding with and including either Hooks and Hinges or Steel Hanging Door Fittings (exclusive of Steel Sheeting or Other Covering, Running Rails and Guides) and Hanging; also Fastening and fixing, conforming to Fe-290, Gde E-165, complete all as specified and as directed.
M&L Rolled Mild Steel in Compound Girders and Stanchions, Lattice Girders, Aerial Masts, Staging for Water Tanks and the like including Caps, Bases, Splices, etc., built up from Two or more Beam or Channel Sections or Angles with Plates including all Lattice Bars, Stiffeners, Gusset Plates, etc., conform to Fe-410-W (Gde E-250), Quality 'A', complete all as specified and as directed.
M&L Rolled Mild Steel in Roof Trusses (Framed), Trussed, Purlins, Crane Gantries, Rails and Fastenings and Heavy Bracket Framing (Beam, Tee, Angle, Channel or Flat Sections) including Distance Pieces, Cleats etc., conform to Fe-410-W (Gde E-250), Quality 'A', complete all as specified and as directed.
M&L Mild Steel Tubular Trusses including Special Shaped Washers, etc. complete using ERW or Induction Butt welded Tubes, confirming to IS:1161-1979, Grade St-240, complete all as specified and as directed.
M&L Plates (Plain or Chequered) Channels, Square cut or Notched (Ordinary and Counter Sunk) forming Holes, without any Aattachment, conform to Gde Fe-410-W (Gde E-250) Quality 'B', complete all as specified and as directed.
M&L Mild Steel Screw Bolts (Machine made) 11mm to 15mm diameter of Neck and length of Bolt exc. 22.5 Cm and not exc. 30 Cm with Hexagonal or Square Heads at One End and screwed the Other End, or screwed Both Ends, Each screwed End to be fitted with Washers and One Hexagonal or Square Nut, complete all as specified and as directed.
S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.
S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridges/ Roof Covering Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.
M&L Aluminum Anodised Snap Grid/ Frame Work of Size 605x605mm in Ceiling, all as per Specification and Drawing of MES Schedule (except Hangers), complete all as specified and as directed.
S&F Hangers 4.0mm dia GI (upto 1200mm length) for adjusting Level, fixed to Roof Slabs by means of Ceilling Cleats made out of GI Flat 40x3.0mm in Size, 60mm long and Expansion Hold Fasteners 12.5mm dia, 40mm long, complete all as specified and as directed.
S&F HSPC Non-Asbestos Fibre Cement Building Boards 595x595x6.0mm thick, Pre-primed, Self Embossed, Textured Designer Boards, Water Resistant, Termite Resistant, Fire Resistant for insulation, fixed or laid/ inserted to Aluminum Snap Grid Frame Work with Screws, complete all as specified and as directed.
M&L Cement Concrete 1:4:8 (40mm graded stone aggregate) 75mm thick in Sub-base to Floor, etc., complete all as specified and as directed.
M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) 40mm thick in Floor, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without Using Extra Cement, complete all as specified and as directed.
M&L Glass Dividing Strips 38mm Wide and 3.0mm thick, inserted in Position, Conform to design complete all as specified and as directed.
M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Sub-base for laying of Tiles, etc. including Maintaining Level Uniformly, finished Concrete Surfaces Fair and Even, complete all as specified and as directed.
M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality and/ or as approved) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate.
M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.18 Sqm but not exc. 0.36 Sqm (1st quality and/ or as approved) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed. NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate.
M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Square/ Rectangular), Area of Each Tile exc. 0.18 Sqm but not exc. 0.36 Sqm (1st quality and/or as approved) in Vertical Surfaces i.e. Dado, Skirting, etc., Set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate.
M&L Glazed Ceramic Coloured Tiles 300x450x7.0mm thick (1st quality as approved) conforming to IS:13753 in Vertical Surfaces i.e. Dado, Skirting, etc., Set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed. NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate.
M&L Cement Concrete 1:3:6 (40mm graded stone aggregates) 75mm thick in Plinth Protection, etc, Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without Using Extra Cement, complete all as specified and as directed.
M&L Flush Pointing in Cement Mortar 1:4 on Brick/ PCC Blocks Walls, complete all as specified and as directed.
M&L Rendering (Internal) 10mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L Rendering (Internal) 5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces of Ceiling, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L Rendering (External) 15mm thick on Bricks/Pre-cast Blocks or Concrete Works consisting in 2 layers, Backing/Under layer of 10mm thick in Cement Mortar 1:4 and Float/Top layer 5.0mm thick in Cement Mortar 1:4 including Mixing WPC to Float/ Top layer, finished Plastered Surfaces Fair and Even, complete all as specified and as directed. NOTE : Water Proofing Compound (WPC) will be Measured & Paid separately under appropriate Item.
M&L Rendering 20mm thick on Bricks/Pre-cast Blocks or Concrete Works consisting in 2 layers, Backing/Under layer of 12mm thick in Cement Mortar 1:4 and Float/Top layer 8.0mm thick in Cement Mortar 1:4 including Mixing WPC to Float/ Top layer, finished Plastered Surfaces Fair and Even, complete all as specified and as directed. NOTE : Water Proofing Compound (WPC) will be Measured & Paid separately under appropriate Item.
Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed.
M&L Preparing Newly Plastered Surfaces of Walls and applying Three Coats of White Wash, complete all as specified and as directed.
M&L Preparing Newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.
M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Based Paint (of approved Tint) over a Coat of Alkali Resistant Priming Paint, complete all as specified and as directed.
M&L Preparing Steel and Iron Surfaces of any descriptions, exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/grade Paint of approved Tint) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.
S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed.
S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule, complete all as specified and as directed.
S&F Pillar Tap 15mm bore (dia), Cast Copper alloy with Capstan Heads, Chromium Plated, Fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed Shanks and Fly-nuts, screwed for Iron Pipe, complete all as specified and as directed.
S&F Stop Cock/Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions, complete all as specified and as directed.
S&F Angle Stop Cock 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions, complete all as specified and as directed.
S&F Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipes, complete all as specified and as directed.
M&L Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylindri-cal, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, Hoisted and Fixed in Position all as specified in MES Schedule and Providing Water Connections, complete all as specified and as directed.
S&F PTMT Ball Valve 20mm bore (dia), having weight not less than 210 Grams, high pressure with Epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and as directed.
S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern) with SWG ‘P’ or ‘S’ Trap, Fixing Bolts and Making Good to Floor/ Distrubed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.
S&F Plastic Water Closet Seat and Cover for Water Closet Pan (Pedestal Pattern), White, Closed Pattern with Flat bottom and Cover and Mild Steel Chromium plated or Aluminised Hinging Devices, complete all as specified and as directed.
S&F Hand Shower (Health Faucet) with Wall Hook, Brass Chromium Plated having 1.20 Metre long with PVC Hose Pipe, complete all as specified and as directed. MAKE : JAQUAR ALD-CHR-593 or equivalent Model in Make : GEM/ MARC (as approved by GE)
S&F Toitet Paper Holder of Size 150mm (as approved), Brass Chromoum Plated with Rod to hold Paper Roll, complete all as specified and as directed.
S&F PVC Flushing Cistern 10 Litre capacity White, Low Level, Valveless, Syphonic Action type, ISI Marked (IS:7231) with Inlet, Ball Valve, Float and Handle, a Pair of Cast Iron Brackets Erecting Stand duly Painted including PVC Flush Pipe 32mm dia with PVC Long Bend, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed.
S&F Vitreous China White Wash Hand Basin of Size 550x400mm, Flat Back including Brass Chromium plated Waste Fitting 32mm bore (dia) and PVC Waste Pipe 32mm bore (dia) of Low or High density, a Pair of Cast Iron Brackets or Erecting Stand duly Painted, Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 but excluding Taps, Chain, Plug & Porocelain Stopper, complete all as specified and as directed.
S&F Bottle Traps 32mm bore (dia), Brass Chromium plated, suitable for Wash Hand Basins with Inlet and Outlet, screwed for Pipe or Connections including necessary Packing, Union, Cap, etc., complete all as specified and as directed.
S&F PVC Connection Pipe 15mm in Size and 450mm in length with PTMT Nuts, complete all as specified and as directed.
S&F Stainless Steel Soap Dish, not less than 125mm in Size (as approved), fixing to Walls with and including Screws and Wooden/ Plastic Cleats, complete all as specified and as directed.
S&F Towel Rack, Brass Chromium Plated, 60 Cm long with Lower Hanger, fixing to Walls with and including Screws and Wooden/ Plastic Cleats, complete all as specified and as directed.
M&L PVC (SWR) Floor Trap having Diameter of Outlet in 75mm, Plain with Grating Chromium plated including Jointing with Solvent Cement, complete all as specified and as directed.
S&F PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid on Floors or fixing to Walls, etc., complete all as specified and as directed.
S&F PVC (SWR) 75mm bore (dia) Bends (any Radius), Diminishing Pieces or Tapers (Larger Bore to be measured) Fittings, Jointing with Solvent Cement, complete all as specified and as directed.
S&F PVC (SWR) Vent Cowl 75mm bore (dia), Jointing with Solvent Cement, complete all as specified and as directed.
S&F PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with PVC/Rubber Ring Joints, with or without Ears, laid on Floors or fixing to Walls, etc., complete all as specified and as directed.
S&F PVC (SWR) 110mm bore (dia) Soil and Waste Pipe, Single Socketed, in any Length with PVC/Rubber Ring Joints, with or without Ears, laid in Trenches, etc., complete all as specified and as directed. NOTE : Necessary Earth Works will be Measured and Paid for separately under appropriate Items.
S&F PVC (SWR) 110mm bore (dia) Bends (any Radius), Diminishing Pieces or Tapers (Larger Bore to be measured) Fittings, Jointing with Solvent Cement, complete all as specified and as directed.
S&F PVC (SWR) Vent Cowl 110mm bore (dia), Jointing with Solvent Cement, complete all as specified and as directed.
M&L Cutting into Existing Manholes for Connecting New Drain Pipes of 110mm (Internal dia), Making Good to Pipe and Rendering, Cutting out Existing Benching for and Forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregate), Smooth Finished and Reforming Benching as required, complete all as specified and as directed.
E/M SERVICES/ WORKS
M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in SURFACE/ CONCEALED PVC Conduit, heavey duty (HMS grade) of suitable Dia/ Size alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc. complete with GI Terminal Box not less than 1.5mm thick, fixing Flush to Wall Surfaces, covered with 3.0mm thick Plastic laminated Sheet Cover and/or Modular Plates of suitable Size for mounting Switches, Sockets, Fan Regulators, etc., Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT/ FAN POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed.
M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in SURFACE/ CONCEALED PVC Conduit, heavey duty (HMS grade) of suitable Dia/ Size alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc. complete for ONE 6 AMP 3 PIN SOCKET OUTLET on SAME BOARD with other Switches, complete all as specified and as directed.
M&L Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green colour) as Earth Continuity Wire, drawn in SURFACE/ CONCEALED PVC Conduit, heavey duty (HMS grade) of suitable Dia/ Size alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc. complete with GI Terminal Box not less than 1.5mm thick, fixing Flush to Wall Surfaces, covered with 3.0mm thick Plastic laminated Sheet Cover and/or Modular Plates of suitable Size for mounting Switches, Sockets, Fan Regulators, etc., Earth Continuity Wire connected to Common Earth dolly for ONE 6/16 AMP, 3/5 PIN SOCKET OUTLET on INDEPENDENT BOARD, complete all as specified and as directed.
M&L Sub-main Wiring with 2-Runs of 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable and 1-Run of 4.0 Sqmm (nominal area) 1100 Volt PVC insulated unsheathed FRLSH Multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty Conductor drawn in SURFACE/ CONCEALED PVC Conduit, heavey duty (HMS grade) of suitable Dia/ Size alongwith all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddle, etc., complete all as specified and as directed. NOTE :- (a) Cost of 3-Run of Cable & 1-Run of PVC Conduit will deemed to be included in the Quoted Unit Rate and the same also Mesured as ONE UNIT. (b) Sub-main Wiring will be measured PVC Conduit only. Wire required for looping, etc. as ordered will deemed to be included in the Quoted UNIT RATE.
M&L Cutting Chases for Concealed Conduit Wiring, Pinning in, Girth exc. 10 Cm and not exc. 20 Cm, Making Good to Disturbed Portion/Surfaces of Walls/ Floor/ Ceiling, etc. with Cement Mortar 1:3 including Applying Surface Treatment (White/ Colour Washing/ Distempering/ Painting) wherever required to match the Existing Finishes, complete all as specified and as directed.
S&F Switch Piano 6 Amp, Single Pole, Flush type, 1-way, 230 Volt AC and Connecting up, complete all as specified and as directed.
S&F Socket Outlet 6 Amp, 5 Pin, Flush type, -in-1, 230 Volt AC and Connecting up, complete all as specified and as directed.
S&F Switch Socket Combination 6 Amp (2 Pin & 3 Pin), Multi-purpose type, 2-in-1, 230 Volt AC, complete all as specified and as directed.
S&F Switch Socket Combination 6/16 Amp (3 Pin & 3 Pin), Multi-purpose type, 2-in-1, 230 Volt AC, complete all as specified and as directed.
S&F Ceiling Rose 65x50mm, 3 Terminals, Surface Bakelite suitable for 230 Volt AC and Connecting up, complete all as specified and as directed.
S&F LED Bulkhead Light Fitting 1x10 Watt, Decorative including LED Light, Driver, Holder, connecting up with and including Flexible Copper Conductor Cable, 3 Core of suitable Size and Length, complete all as specified and as directed.
S&F LED Light Fitting 10 Watt, Wall mounted Mirror type with High Out-put Diffuser 2 Feet, 220 Volt AC, Decorative type with Driver, Holder and LED Lamp, connecting up with and including Flexible Copper Conductor Cable, 3 Core of suitable Size and Length, complete all as specified and as directed.
S&F LED Light Fitting 1x20 Watt, 220 Volt, AC Decorative Box type with Driver, Holder, LED Tube Light and connecting up with and including Flexible Copper Conductor Cable, 3 Core of suitable Size and Length, complete all as specified and as directed.
S&F Exhaust Fan 250mm Sweep with Louvers Shutter, 1200 RPM, 230 Volt, 50 Hz, made of Sturdy Engineering Plastic, Copper Winding with Fixing Arrangements using Fastener, Providing Electric Connection from Ceiling Rose to Fan with and including Twisted Flexible Copper Conductor Cable, 3 Core of suitable Size & Length, complete all as specified and as directed.
S&F MCB 6 Amp to 32 Amp, Single Pole, 'C' Curve, 50 Hz, 10 kA, 240 Volt and Connecting up, complete all as specified and as directed.
S&F Isolator 20 Amp, Single Pole & Neutral, 50 Hz, 10 kA, 240 Volt and Connecting up, complete all as specified and as directed.
S&F MCB 40 Amp to 63 Amp, Single Pole & Neutral, 'C' Curve, 50 Hz, 10 kA, 240 Volt and Connecting up, complete all as specified and as directed.
S&F Sheet Metal Enclosure for DB's when MCBs to be used 4-way, SPN, 240 Volt, Double Doors, IP-43 Protected, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up, complete all as specified and as directed.
S&F Sheet Metal Enclosure for DB's when MCBs to be used 8-way, SPN, 240 Volt, Double Doors, IP-43 Protected, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up, complete all as specified and as directed.
Supply and Laying or Fixing or Passing through Pipe, 1100 Volts grade, Heavy duty Cable with PVC insulated Aluminium Stranded Conductor, served with an Inner sheathing of PVC Tape armoured with Galvanised Steel Wire or Tape and Overall PVC Sheathed, Nominal cross section 10 Sqmm, 2 Core in Service Connections, complete all as specified and as directed.
M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick, buried directly in Ground vertically to a depth not less than 2.25 Metre below Ground Level with Top Edge of Earth Plate at depth not less than 1.50 Metre below normal Ground Level, connected to Galvanised Earth Lead Wire 4.0mm dia by means of Bolts, Nuts, Check, Nuts and Washers of Galvanised Iron or Steel and Earth Wire protected with and including GI Pipe 15mm bore (dia) Light grade, connected to Test Point upto 7.50 Metre away from Earth Electrode situated, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc.150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of Size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/ Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion, complete all as per specified and as directed.
Excavating in Trenches, not exc. 1.50 Metre Wide and Depth not exc. 1.50 Metre for Taking out/up and/or Laying of UG Cables, Water Pipes Lines, etc., Forming Surfaces to required Foundation, etc. and getting out as in Soft/Loose Soil, complete all as specified and as directed.
Returning, Filling in including Spreading, Levelling, Watering, Well Ramming in Layers not exc. 25 Cm, Providing Heaps along the Route of the UG Cables, Water Pipes Lines, etc. with Surplus Soil in Soft/Loose Soil, complete all as specified and as directed.
Supply, Laying & Testing XLPE insulated, Armoured, Heavy duty, Electric Cable with Aluminium Stranded Conductor, 1100 Volt grade, Cross-sectional Area 10 Sqmm, 2 Core, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc., complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks Protection, GI Pipe, etc. will be Measured and Paid separately under relevent Items.
M&L Sand Cushioning (dry) in Trenches/Ducts for Protection of UG Cables (below, above and around the UG Cable laid) of 230mm Spread thickness (8.0mm in Depth before laying the Cable and 150mm in depth after laying the Cable) and Consolidated (Punned) upto 180mm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only will be Measured.
Supply & Laying Sub-class ‘B’ Bricks of Size 230x115x75mm, Kiln burnt, for Covering to UG Cable as Protection, laid Flat, Transversally Width Equal to the Length of the Cable, complete all as specified and as directed.
M&L Galvanised Steel Tubing Pipe 25mm bore (dia), Light grade with Bend, laid in Trenches or under Roads/ Flooring/ Culverts and/or fixing to Electric Poles with suitable Size Mild Steel Flat Iron 40x4.0mm Clamps, Bolts, Nuts, Washers, etc., complete all as specified and as directed.
Supply & Laying PP-R (Polypropylene Random Copolymer) 20mm bore (dia) Pipe, 3 layer, SDR 7.4 (PN 16) and Fittings, having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Trenches and Testing of Joints as per Manufactures instruction, complete all as specified and as directed.
Supply & Laying PP-R (Polypropylene Random Copolymer) 25mm bore (dia) Pipe, 3 layer, SDR 7.4 (PN 16) and Fittings, having Inner with Anti-microbial Property and Outer Green Coloured, UV Stabilize Property Fusion welded having Thermal Stability for Hot and Cold Water Supply including PP-R Plain and Brass threaded Poypropylene Random Fittings and required for fixing to Walls or laid in Floor/ Trenches and Testing of Joints as per Manufactures instruction, complete all as specified and as directed.
S&F PP-R (Polypropylene Random Copolymer) Gate Valve 25mm bore (dia), Brass insert with Wheel Head, screwed both Ends, complete all as specified and as directed.
AFTAB ENTERPRISES
STANDARD ELECTRIC WINDERS
boruah construction
M/s. R. K. Trading Company
R.D.CONSTRUCTION
M/S HAZARIKA CONSTRUCTION
FREEZCON
NChetia and Sons Trading
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .