8179 REPAIR/MAINTENANCE OF LT DISTRIBUTION NETWORK, POLE PAINTING, INCLUDING FEEDER PILLERS, LT CABLES, LT SWITCH GEARS AND COPE POINTS OF BLDNGS UNDER HQ WNC AND HQ MNA AT NAVAL DOCKYARD UNDER AGE E/M 1 UNDER GE (NW) KUNJALI

Amount

Material and labour for disconnecting all electrical connections from unserviceable LT panel carefully and Supply, fabrication, installation, testing & commissioning of LT Panel board in replacement for 415 volts,4 wire system, cubical type in door type, dust and vermin proof, made out of 2mm thick CRCA sheet, front openable doors having copper bus bar of capacity 800 amps including powder coated painting, internal wiring with suitable size of stranded copper conductor cable,CTs, foundation, supporting channels,cable termination,cable gland, hinged cover with gasket complete etc all as directed and suitable to accommodate the following switch gears and meters :- a) MCCB 650 Amps 4pole,36 KA,Thermal magnetic - 1 Nos (Incoming ) (Power supply & DG Supply b) MCCB, 4 pole 200Amps,16KA,Thermal magnetic- 1 Nos (Out going) c) MCCB, 4 pole 125 Amps,16KA,Thermal magnetic- 6 Nos (Out going) d) MCB FP 100 A, 10 KA Thermal magnetic-06 Nos e) Digital type Volt meter , digital type ,0 - 800V - 1 Nos, Make : L&T/Scinder f) Digital type Ammeter, digital type with CT's - 1 No Make : L&T/Scinder g) Indication lamps (R,Y,B) LED type - 1 set Note: (a) Make of MCCB : Siemens/Legrand/GE (b) Dismantling of old panel/cable cost are demmed to be included

S& F in replacement of GI cable tray perforated type 2 mm thick of size 600x50mm ( Including pre fabricated GI clamp suitable for fixing/supporting ) with pre-fabricated GI/SS covers suitable for fixing vertically/horizontally including all accessories such as bending,shaping,drilling,welding, cutting & all fixing arrangement complete all as directed. Note : The cost of taking down existing cable of any size and numbers from existing posting and realigning on cable tray is deemed to be included in the quoted rates.

S& F in replacement of GI cable tray perforated type 2 mm thick of size 450x50mm ( Including pre fabricated GI clamp suitable for fixing/supporting ) with pre-fabricated GI/SS tray covers suitable for fixing vertically/horizontally including all accessories such as bending,shaping,drilling,welding, cutting & all fixing arrangement complete all as directed. Note : The cost of taking down existing cable of any size and numbers from existing posting and realigning on cable tray is deemed to be included in the quoted rates.

Supply and fixing in repair PVC trunking of 100mmx50mm with all accessories such as bends, covers including cutting, drilling and fixing at any position complete all as specified and directed. Note : The arrangement for ladder/hydra lifts etc required for work is deemed to be included in the quoted rates.

Supply and fixing in repair PVC trunking of 150mmx50mm with all accessories such as bends, covers including cutting, drilling and fixing at any position complete all as specified and directed. Note : The arrangement for ladder/hydra lifts etc required for work is deemed to be included in the quoted rates.

Supply and fixing in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded Copper conductor of size 10 sqmm 4 core. laid in trench/ duct / along pole/wall etc including making connection complete all as directed. Note : 1. The cost of thimbles/lugs and cable gland, saddling etc is incl in quoted rate and no extra payment will be made for it.

All as per item No. 6 above but for cable size 50 sqmm 3.5 core complete all as specified and directed.

All as per item No. 6 above but for cable size 95 sqmm 3.5 core complete all as specified and directed.

S & F in replacement LED garden light 9W cylindrical shaped integral decorative LED bollard with opal acrylic diffuser and IP 65 with all accessories includingn PCC foundation tapper plug, bolts, nuts, screws etc complete all as specified and directed . Make : Shakti cat part No. SZPGBMX009-F or equivalent

S&F in replacement of LED street light 120 W energy saving and envirment friendly light fitting with housed in pressure dia cast aluminium housing with sealed toughened glass cover, SMD LED with secondery lens luminaires with IP 66 protection including all fixing accessories complete all as specified and directed .

S&F in replacement of LED street light 90 W energy saving and envirment friendly light fitting with housed in pressure dia cast aluminium housing with sealed toughened glass cover, SMD LED with secondery lens luminaires with IP 66 protection including all fixing accessories complete all as specified and directed.

Supply and fix in replacement of LED flood lights 250 W energy saving and enviromental friendly light fitting IP 66 high power LED floodlight with pressure die cast aluminium housing complete with all accessories. C&S / Havells/Bajaj

S&F in replacement of LED highbay light 250 W energy saving and envirment friendly light fitting, pressure dia cast aluminium housing with aim & adjustable bracket, matt finished reflector for gglare elimination, SMD LED with secondary lens with IP 66 protection including all fixing accessories complete all as specified and directed by Engr-in-Charge. bajaj/C&S/Havells/Philips

Supply and fixing in repair on load change over switch 400 Amps capacity, 415 Volts, 50 Hz, 4 Pole with advance neutral complete with sheet metal enclosure complete all as specified and directed .

Supply and fix in repairs Air Circuit Breaker of capacity 1600A, Ics=100% Ic, 50kA complete all as specified and directed.

Supply and fixing in replacement of LED light column/LED Tiranga light coumn of 4 meter height with cylindrical aluminium pipe housing, opaque diffuser made from engineering grade polymer, 50W, IP-65 complete all as specified and directed. Make : Shakti cat part No. SZPGCMX050-4M or equivalent

Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 2 core. laid in trench/ duct / along pole/wall etc including making connection complete all as directed. Note : 1. The cost of thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.

All as per item No. 17 above but for cable size 10 sqmm 4 core complete all as specified and directed.

All as per item No. 17 above but for cable size 16 sqmm 4 core complete all as specified and directed.

All as per item No. 17 above but for cable size 25 sqmm 3.5 core complete all as specified and directed.

All as per item No. 17 above but for cable size 35 sqmm 3.5 core complete all as specified and directed.

All as per item No. 17 above but for cable size 50 sqmm 3.5 core complete all as specified and directed.

All as per item No. 17 above but for cable size 95 sqmm 3.5 core complete all as specified and directed.

All as per item No. 17 above but for cable size 120 sqmm 3.5 core complete all as specified and directed.

All as per item No. 17 above but for cable size 150 sqmm 3.5 core complete all as specified and directed.

All as per item No. 17 above but for cable size 185 sqmm 3.5 core complete all as specified and directed.

All as per item No. 17 above but for cable size 240 sqmm 3.5 core complete all as specified and directed.

All as per item No. 17 above but for cable size 300 sqmm 3.5 core complete all as specified and directed.

S & F in replacement hot dip galvanized anti corroded weather proof octagonal electric poles 8 Mtrs long top mounting on foundation complete with base plate including PCC foundation as per SSR provision and directed with 1500 mm long arms bracket, tapper plug, bolts, nuts and screws etc as specified complete including taking out existing RCC/damaged rusted MS pole with street light and street light bracket complete all as specified and directed .

S & F in replacement hot dip galvanized anti corroded weather proof octagonal electric poles 9 Mtrs long top mounting on foundation complete with base plate including PCC foundation as per SSR provision and directed with 1500 mm long arms bracket, tapper plug, bolts, nuts and screws etc as specified complete including taking out existing RCC/damaged rusted MS pole with street light and street light bracket complete all as specified and directed .

Excavation in trenches n exc1.5m wide and n exc in depth for laying of cables and getting out in loose/soft soil complete all as directed.

Returing filling in including spreading, levelling watering and well ramming in layers not exc 25cm complete all as directed.

Removing excavated material n exc 50cm and deposting where directed at a level n exc 1.5m above the starting point complete all as directed.

Material and labour for sand filling in trenches fine dry sand as sand cushioning to cable 8 cm before laying of cables and 15 cm after laying cable which shall be punned down to 10 cm complete all as specified and directed. (Note : Only punned down thickness shall be measured and paid)

M&L for un-reinforced,precast concret cable cover of size 250x150x40mm class LV type-I for cable protection all as specified and directed

Supply and fix in replacement MS arms bracket 30 degree bend, 1.5mtr long for mounting one in nos street light fitting including clamps / nut / bolts & washer to brace the same properly with duly painted in synthetic enamel paint of two coat in silver colour complete all as specified and directed .

S&F GI tubing light grade 80mm dia with all fittings laid in trenches/fixed on wall/ceiling including dismantling of old pipe etc all as specified and directed. Make : Jindal/Tata/Surya Prakash

S&F GI tubing light grade 100 mm dia with all fittings laid in trenches/fixed on wall/ceiling including dismantling of old pipe etc all as specified and directed. Make : Jindal

Cutting road/hard standing for laying of cable and re mataling/making good the same to match the existing surface complete all as directed by Engr incharge.

S&F in repair of double door type vertical type TPN DB 4 Way ,240V with 100A copper busbar , double door type IK 09 protection suitable for housing MCCB's all as specified and directed by EIC.Make: Legrand cat No 507781/Seimens/C&S. Note : DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S&F in repair of double door type vertical type VTPN DB 6 Way ,240V with 100A copper busbar , double door type IK 09 protection suitable for housing MCCB's all as specified and directed by EIC.Make: Legrand cat No 507781/Seimens/C&S. Note : DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S&F in repair of double door type vertical type VTPN DB 8 Way ,240V with 200A busbar , with metalic double door type IP 43 IK 09 protection suitable for housing MCCB's all as specified and directed by EIC.Make: Legrand cat No 507783/Seimens/C&S. Note : DBs shall be concealed in wall where ever posible including making good the surface to match with surrounding.

S & F in repair of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20A all as specified and directed by EIC. Make: Siemens/Legrand/C&S.

S & F in repair MCB DB double door SPN 12 Way with 200 Amps rated copper bus bar all as specified and directed. MAKE: C&S/Legrand / seimens/C&S

S & F in repair MCB DB double door SPN 8 Way with 200 Amps rated copper bus bar all as specified and directed. MAKE: C&S/Legrand / seimens/C&S

S & F MCB SP 6-32 Amps,10KA. 230volts all as specified and directed. MAKE: C&S/Legrand / seimens/C&S

S & F MCB SPN 63 Amps,10KA, 230Volt all as specified and directed. MAKE: C&S/Legrand / seimens/C&S

S & F MCB TPN 63 Amps,10KA, 230Volt all as specified and directed. MAKE: C&S/Legrand / seimens/C&S

S&F in replacement of unserviceable MCCBs of following capacities :- a) MCCB 63 Amps, 25 KA capacity 4 Pole. Make C& S/ Legrand/GE

b) MCCB 100 Amps 25 KA capacity 4 Pole. Make C& S/ Legrand/GE

c) MCCB 125 Amps 25 KA capacity 4 Pole. Make C& S/ Legrand/GE

d) MCCB 200 Amps 36 KA capacity 4 Pole.Make C& S/ Legrand/GE

e) MCCB 250 Amps 36 KA capacity 4 Pole. Make C& S/ Legrand/GE

f) MCCB 400 Amps 36 KA capacity 4 Pole.Make C& S/ Legrand/GE

Supply and fix in repair of STRAIGHT THROUGH JOINT complete with jointing material (Heat srinkable) for 1100V grade cable for XLPE armoured alluminium conductor cable of size 240 sqmm 3.5 core complete all as specified and directed. Make : Rychem/3M

All as per item No 55 above but for cable size 185 sqmm 3.5 core

All as per item No 55 above but for cable size 120 to 150 sqmm 3.5 core

All as per item No 55 above but for cable size 95 sqmm 3.5 core

All as per item No 55 above but for cable size 70 sqmm 3.5 core

All as per item No 55 above but for cable size 50 sqmm 3.5 core

All as per item No 55 above but for cable size 25 to 35 sqmm 3.5 core

All as per item No 55 above but for cable size 16 to 10 sqmm 3.5 core

M&L for finding underground LT/HT cable faults of any size of cable by using fault locating machine and jointing cable with joint kit of appropriate size including testing of power supply complete all as specified and directed. Note : (i) LT Cable joint kit shall be measured and paid separately under respective items of the schedule. (ii) Cost of hiring of cable fault locator machine with trained technician /operator deemend to be included in quoted rate.

Supply , fixing, testing in repairs of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 25 mm dia with 250 micron ( averaSchneider ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF Powerfill Loresco compound shall be supplied in 50 Pound Bag. ( 1 Bag of 50 Pounds required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set alongwith earth pit weatherproof incl all as specified . Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

Supply and fixing in replacement of LED façade wall grazer 36W made up of aluminium cast housing, IP-65 with options 2700k to 6500k to RGB with option of remote operations complete all as specified and directed. Make : Shakti cat part No. SZGFWPX036 or equivalent

S&F in repair of 50 Sqmm single core copper cable or main earthing lead fixed to wall with clamps or recess or croses or buried in ground or drawn in conduits/pipe or fixed to poles or any other indicated situation for loop earthing etc as required all as specified and directed by Engr-in-Charge. Make Polycab/Plaza/Havells

M&L for 25x4mm GI earth continuity conductor or main earthing lead fixed to wall or buried in ground or drawn in conduit/ pipe or fixed to transformer/panel body complete all as specified

Supply and fixing in replacement of decorative LED post Top lights 60W, cast aluminium housing, suitable for fixing outer dia 55mm size complete all as specified and directed. Make : Shakti cat part No. SZPGLMX060 or equivalent.

Supply and fix in repair PVC/Polycarbonate made junction box of existing size (not less than 250x250x160mm) having two incoming and one outgoing cable ways alongwith fixing arrangement complete including 01 Nos 6 Amp MCB SP for security light all as specified and directed. Make : Hensel/HPL/Sintex or equivalent make as approved by GE.

TETRI ENTERPRISES (BID ID -3347846)

siddharth and company (BID ID -3347635)

shubham construction (BID ID -3348024)

SHRI SAI ENTERPRISES (BID ID -3346353)

SACHINENTERPRISES (BID ID -3348185)