PETTY REPAIRS TO OTM, MD ACCN OF VARIOUS LOCATION OF AREA-I, II AND COMPREHENSIVE MAINT/REPAIR OF STP AND ALLIED WORK UNDER GE SAUGOR

Amount

Carry out day to day rectification of electrical complaints like no electric supply, light, power, fan and geyser etc and checking of existing electrical item for continuos electric supply and replacing of fuses small peaces of wire uto 1.5 meter etc. complete all as directed by Engr in Charge. Note : (a) Replacement of major items shall be measured and paid as 'Supply only' under relevant item of this schedule. (b) Repairing upto 04 point with out any other material will be considered as one repair. (c) Electrician and helper so detailed by the contractor will report to MES complaint cell at 0830 hrs morning to receive complaint s(complaint slip provided by contractor) from department and complaint should be rectified within 08 hours.

Supply only modular switch, one way,6 Amp 230, 1 module complete all as specified and directed.

Supply only modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed

Supply only modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed.

Supply only modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed.

Supply only modular fan step regulator 120 Watt -2 module complete all as specified and directed.

Supply only modular bell push 6A one module complete all as specified and directed .

Supply only switch piano type flush, single pole, one way 5 A 230 V complete all as specified and directed

Supply only socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed

Supply only switch piano type flush, single pole, one way 15 A 230 V complete all as specified and directed

Supply only socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V complete all as specified and directed

Supply only ceiling rose, surface backlite,three terminal complete all as specified and directed

Supply only lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed

Supply only in repair/replacement bell ding dong 230 V, single phase complete all as specified and directed

Supply only bell push flush type one way 5Amp 240 Volt complete all as specified and directed

Supply only electronic double space rotary 5 speed type regulator 120 watt complete all as specified and directed .

Supply only in repair/replacement socket outlet multi purpose, 3 pin, 15 Amp & 3 pin 5 Amp, combination complete all as specified and directed

Supply only in repair/replacement socket outlet 3 pin 5 amp, combination complete all as specified and directed

S&F in replacement laminated super hylem sheet of size 8" x 5", any colour 3mm thick of sizes including fixing of switches, sockets as per existing pattern complete all as specified and directed

All as per Srl item No. 19.00 above but of size 5"x5"

All as per Srl item No. 19.00 above but of size 8"x10".

All as per Srl item No. 19.00 above but of size 8"x12".

All as per Srl item No. 19.00 above but of size 9"x11".

S&F modular metal flush box 1/2 module complete all as specified and directed

S&F modular metal flush box 3 module complete all as specified and directed

S&F modular metal flush box 4 module complete all as specified and directed

S&F modular metal flush box 6 modulecomplete all as specified and directed

S&F modular White cover plate with frame 1 module complete all as specified and directed

S&F modular White cover plate with frame 2 module complete all as specified and directed.

S&F modular White cover plate with frame 3 module complete all as specified and directed.

S&F modular White cover plate with frame 4 module complete all as specified and directed.

S&F modular White cover plate with frame 6 module complete all as specified and directed.

S&F modular White cover plate with frame 8 module complete all as specified and directed.

Supply only modular PVC board 3/4/6/8/12 module complete all as specified and directed

Supply only normal pvc board complete all as specified and directed

Supply only PVC AC box for MAP ACCN complete all as specified and directed

S&F in replacement PHOTON ULTRA PL-L 18W with very high efficacy suited for installation in existing lamp holder complete all as specified and directed . Make : Havells cat part No PHOTONULTRAPLL419TL18WLED865SPC or equivalent make as specified in Appx 'C' of Particular Specifications

S&F in replacement of 2' X 2' ultra slip recess mounted luminaire with high brightness cool white/warm white 36/40 Watt LED package and Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable for armstrong/grid ceiling complete all as specified and directed. Make:-Bajaj cat part No.BPSF 36W WH LED or equivalent make as specified in Appx 'C' of Particular Specifications

S&F 36 watt LED driver in replacement of 2' X 2' ultra slip recess mounted luminaire with high brightness all as per site requirement complete all as specified and directed

S&F in replacement PVC insulated and unsheathed single core multi stranded copper conductor 1.5 Sqmm (Nominal Area) drawn in existing conduit / batten / surface complete all as specified and directed

All as per Srl item No. 40.00 above but size 2.5 Sqmm

All as per Srl item No. 40.00 above but size 4.0 Sqmm

All as per Srl item No. 40.00 above but size 6.0 Sqmm

S&F in replacement TL fitting 20 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed. Make:-Bajaj cat part No BCLSB 20 WH or equivalent make as specified in Appx 'C' of Particular Specifications

S&F in replacement LED TL fitting 20 watt warm white for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed

S&F in replacement box type LED optic fitting 10 Watt 2 feet box type complete all as specified and directed. Make:-Bajaj Cat part No BCLSB10WH or equivalent make as specified in Appx 'C' of Particular Specifications

S&F in replacement PVC insulated and unsheathed twin core flexible copper wire 1.5 Sqmm (Nominal Area) drawn in existing conduit / batten / surface complete all as specified and directed

S&F in replacement PVC insulated and unsheathed twin core flexible copper wire 0.75 Sqmm (Nominal Area) drawn in existing conduit / batten / surface complete all as specified and directed

S&F in replacement MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement MCB SPN 240 volt 63 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement MCB SP 240 volt 63 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in relacement double door metallic sheet metal enclosure for DB double door TPN 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces shall be included in the quoted rate .

S&F in replacement of TPN 63 Amps 415 V including making electrical coming/outgoing connections with lugs/thimbles complete all as specified and directed

S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 12 way, 240 V with 200 Amps rated bus bar complete all as specified and directed

S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar complete all as specified and directed

S&F in replacement double door metallic sheet metal enclosure for DB double door(IP-42/43) When MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete all as specified and directed

S&F in replacement metallic sheet metal enclosure for DB Single door(IP-42/43) When MCBs to be used SPN 2 ways, 240 V with 200Amps rated bus bar complete all as specified and directed

S&F in replacement double door metallic sheet metal enclosure for DB double door(DPX-125 ) VTPN 4 Way 415 Volts with 200 Amps rated bus bars IP 43- "IK 09 complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces shall be included in the quoted rate .

S&F in replacement MCCB 63 Amps 4 pole, 415 V 16 KA complete all as specified and directed

S&F in replacement MCCB 100 Amps 4 pole, 415 V 16 KA complete all as specified and directed

S&F in replacement including testing and connecting with existing light point with suitable size of flexible wire COMET ROUND Slim surface mounted round al. die cast body with premium diffuser to ensure glare free even distribution of light.12 W LED 6000K complete all as specified and directed. Make- Havells cart part No LHEAAVP7IL1W012 or equivalent make as specified in Appx 'C' of Particular Specifications

S&F in replacement including testing and connecting with existing light point with suitable size of flexible wire COMET SQUARE Slim surface mounted round al. die cast body with premium diffuser to ensure glare free even distribution of light.18 W LED 6000K complete all as specified and directed. Make- Havells cart part No LHEAAWP7IL1W018 or equivalent make as specified in Appx 'C' of Particular Specifications

S&F in replacement including testing and connecting with existing light point with suitable size of flexible wire OCTANE LED PANEL ROUND slim compact aumium die cast edge lit panel Recess mounted square fixture with opal diffuser and separate electronic driver 12W LED 6500K complete all as specified and directed. Make- Havells cart part No LHEBHDP7IZ1W012 or equivalent make as specified in Appx 'C' of Particular Specifications

M&L for concealed sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit not less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed. .

M&L for surface conduit sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit /casing-n-caping of suitable size . ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed.

M&L for sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC conduit /Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed.

M&L for sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 2.5 sqmm (for main current) drawn in & incl PVC conduit/ Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 2.5 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed.

S&F in replacement LED Bulk head designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. .Make - Havells cat part No LHEXCGP7UN5W013 or equivalent make as specified in Appx 'C' of Particular Specifications

S&F in replacement 1100 volts grade heavy duty flat cable PVC insulated stranded aluminium conductor 10 sqmm 2 core over all PVC sheathed in service connection suspended by insulating hangers complete all as specified and directed.

S&F or layng in ground 1100 volts grade heavy duty flat cable PVC insulated stranded aluminium conductor 6 sqmm 2 core in garden light ,lawn etc including PVC regid conduit pipe complete all as specified and directed..(Note:-The rate quoted shall deemed to be included for earthwork in garden or lawn )

S&F in replacement metal clad box enclosure with socket plug top and MCB SP 20 Amps flush mounting enclosure with 2 pin and earth plug socket complete all as specified and directed.

S&F PVC casing caping medium grade of size 1" x 1/2" including fixing on wall/ceiling with clamp/saddles for wiring wire all as required at site complete all as specified and directed.

S&F PVC conduit of size 25/32 mm dia including fixing on wall/ceiling with suitable clamp/saddles for wiring wire all as required at site complete all as specified and directed.

S&F PVC conduit of size 20mm dia medium grade including fixing on wall/ceiling with suitable clamp/saddles for wiring wire all as required at site complete all as specified and directed..

S&F in replacement SPARKLE PRO ADJUSTABLE 08 watt warm white Recess mounted adjustable LED down/lighter with made of extruded aluminium housing and high power LED as a light source with clear diffuser with eectronic driver 08 Watt complete all as specified and directed.

S&Fin replacement LED FLEXI STRIP 24 W flexible LED strip uses high brightness SMD LED as the light source for indoor application only including LED driver, with wide viewing angle for good light distribution, easy to install complete all as specified and directed.

S&F in replacement EDGEPRO SQUARE 18 watt natural white Slim-Fit low profile downlights are engineered to driver superior light output and uniformity utilising the latest edge-lit LED technoogy of size 210x210mm height 16mm complete all as specified and directed.

S&F in replacement CORAL (OPAL) IP 66 post top energy saving, environment friendly long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LED as light source complete all as specified and directed.. Make - Havells Cat part No CORALPT35WLED757PSYMTOPC or equivalent make as specified in Appx 'C' of Particular Specifications

S&F in replacement CONE IP 65 series acts as a imposing street furniture. The elegant yet minimalsitic design acts silent observer and giving lihgt, diffuser at the upper portion acts a beacon of path guidance in a landscape environment complete all as specified and directed. . Make Havells Cat Part No CONEBL8WLED857SSYMTOPC or equivalent make as specified in Appx 'C' of Particular Specifications

S&F in replacement EDGEPRO SQUARE 15 watt natural white Slim-Fit low profile downlights are engineered to driver superior light output and uniformity utilising the latest edge-lit LED technoogy of size 180x180mm height 16mm complete all as specified and directed

Taking up/down the Non clogging submersible pump set 7.5 HP Capacity, 25.5 M head. 2.27 LPS, Pump model ; B4VJPE 0258, 2900 RPM from STP Equlizer tank for servicing & overhauling and Dismantling the motor, removing the unsv ball bearings (DE&NDE), cleaning the inside of the motor body, varnishing the winding coils, replacing the bearings, terminal plate, terminals, terminal box, lugs and connector etc and refixing the rotor complete and accessories complete all as specified and directed by Engineer -in-Charge Note: The spare parts replaced shall be measured and paid separetely under Srl item No.83 here-in-after.

Supply only following items for non clogging submersible pump set 7.5 HP Capacity complete all as directed:-

NDE/DE Bearing suitable for 7.5 Motor Non clogging pump set

Water Seal

Terminal Plate with cover

Taking out the defective compressor Motor 40 HP Capacity, 6.5 MWC Pressure,1390 RPM, Dismantling the motor, removing the unserviceable ball bearings (DE&NDE), cleaning the inside of the motor body, varnishing the winding coils, replacing the bearings, terminal plate, terminals, terminal box, lugs and connector etc and refixing the rotor complete and comressor plunger gears & accessories complete all as specified and directed by Engineer-in-Charge Note: The spare parts replaced shall be measured and paid separetely under Srl item No.85 here-in-after.

Supply only following items for compressor Motor 40 HP Capacity complete all as directed:-

V Belt as per existing size

Compressor Oil

Terminal Box

Terminal Plate

Oil level indicator panel

Taking out the defective Filter feed pump KDS-1030+, 25M Head 10HP Capacity,,2900 RPM, Transport toe private works, Dismantling the motor, removing the unsv ball bearings (DE&NDE), cleaning the inside of the motor body, varnishing the winding coils, replacing the bearings, terminal plate, terminals, terminal box, lugs and connector etc and refixing the rotor complete and accessories complete all as specified and directed by Engineer-in-Charge Note: The spare parts replaced shall be measured and paid separetely under Srl item No.87 here-in-after.

Supply only following items for Filter feed pump KDS-1030+, 25M Head 10HP Capacity complete all as directed:-

NDE/DE Bearing suitable for 7.5 Motor Non clogging pump set

Terminal Plate with cover

M&L for dismantling centrifugal filter feed pump suitable for 7.5 HP Motor for carrying out repairs, replacement of worn out parts such as impellers, bearings, gland metal bushes etc., and reconditioning of spare parts such as shaft, impellers, housing body, bearing gland plate etc., by metalling and machining to their original shape and size and assembling back into position by using new suitable gland dory, gland plate, gland/rubber packing including studs/gland bolts and nuts, coupling bushes etc., oiling and greasing for making pumpset fully functional and testing for satisfactory running complete all as specified and directed by Engineer -in-Charge. Note: The spare parts replaced shall be measured and paid separetely under Srl item No.89 here-in-after.

Supply only following items for filter feed pump suitable for 7.5 HP Motor complete all as directed:-

NDE/DE Bearings

Gland flange with studs

Gun metal Bush (Male and female)

Taking out the Centrifuge (Decanter) Type -ALDER10, Max solid delivery 3.0 Kg/dm2 induction motor 5.3 HP Capacity,2931 RPM, Squre Case, Transport toe private works, Dismantling the motor, removing the unsv ball bearings (DE&NDE), cleaning the inside of the motor body, varnishing the winding coils, replacing the bearings, terminal plate, terminals, terminal box, lugs and connector etc and refixing the rotor complete and accessories complete all as specified and directed by Engineer -in-Charge Note: The spare parts replaced shall be measured and paid separetely under Srl item No.91 here-in-after.

Supply only following items for induction motor 5.3 HP Capacity complete all as directed:-

NDE/DE Bearing suitable for 7.5 Motor Non clogging pump set

Terminal Plate with cover

M&L for dismantling centrifugal pump suitable for 5.3 HP Motor for carrying out repairs, replacement of worn out parts such as impellers, bearings, gland metal bushes etc., and reconditioning of spare parts such as shaft, impellers, housing body, bearing gland plate etc., by metalling and machining to their original shape and size and assembling back into position by using new suitable gland dory, gland plate, gland/rubber packing including studs/gland bolts and nuts, coupling bushes etc., oiling and greasing for making pumpset fully functional and testing for satisfactory running complete all as specified and directed by Engineer -in-Charge. Note: The spare parts replaced shall be measured and paid separetely under Srl item No.93 here-in-after.

Supply only following items for 5.3 HP Motor complete all as directed:-

NDE/DE Bearings

Gland flange with studs

Gun metal Bush (Male and female)

Taking out the Sludge pump set /1.5 KW/2.0 HP Capacity from Sewage collection sump ,Transporting to Authorised private work shop , dismantling the motor, removing the unsv ball bearings (DE&NDE), cleaning the inside of the motor body, varnishing the winding coils, replacing the bearings, terminal plate, terminals, terminal box, lugs and connector etc and refixing the rotor complete and accessories complete all as specified and directed by Engineer -in-Charge Note: The spare parts replaced shall be measured and paid separetely under Srl item No.95 here-in-after.

Servicing the Sewage treament plant motor control panel, taking out the unsv starter, Contractors, LVC, Water level sensor, single phase preventor, temp sensor, water low level sensor, Volt meter , Multi functional meter, HRC Fuse carrier, relays etc and water proof PVC insulated flat multi core cable as per existing capacity, re-wiring the control panel for making serviceable condition including the cleaning of the panel inside using Air flower and testing for statisfactory serviceable condition completet all as specified directed by Engineer-in-Charge Note: The spare parts replaced shall be measured and paid separetely under Srl item No.96 here-in-after.

Supply only following items for sludge pump set and STP complete all as directed:-

Relay as per exisitng sample

LED indication lamop with holder

DOL Starter suitable for 2.0 HP Capacity motor as per existing sample

Push Button

Contactors as per model and sample

Single Phase preventor as per sample

Sodium Hypochlorite of 6% Purity,specific gravity 1.07-1.1, Concentration 5-6%

Dewatering Polylectrolyte Powder

Bleaching Powder 30% chlorine content

Special flexible Nylon suction tubing as per site requirment with standerd water pressure 10 kg/cm2

S&F Hydro solution dozing system Modal M-14 Flow LPH max output 100, max pressure 3.0 as per existing model, capacity, outlet pressure alongwith all connected accessories including taking down existing unserviceable chemical metering dozing system from STP complete all as specified and directed. Make-Milton Roy Ltd or equivalent make as approved by GE

Excavation of soil up to 5cm root of the vegetation cutting removing completely by spade and surface dressing all around the STP installation under GE Saugor area to keep the installation area(external only) clean and tidy all as per specified and directed by Engineer -in-Charge. NOTE: All the installation shall be kept clean through out the contract period by repeatedly removing the grasses/trees/weads as many times as required depending on the growth of the grass

M&L for STP installation Machinery details sign board single side Acrylic sign board made by strong adhesive back finish support with stickering letters of and fixed with metallic screw with washer,board size, letter size as per site requirement direction given by Engineer-in-Charge. Note:- (i) Marking of the letters/Machinery data as per the directions given by Engineer-in-Charge

S&F Synthetic insulating mat of size 2mx1x10mm thick in DG set insallation with necessary fixing accessories and arrangement complete all as directed

Removing raw sludge, Pumping out the sewage below foot valve/ground level the bottom of the Lift Jack Well (MRC Area) of any size including scrapping brushing side walls bottom slab underneath of roof slab of collection sump bottom side walls of lift well removing algea sludge and cleaning with fresh water and flushing out from the bottom including one coat of white washing internal surfaces and One coat of colour washing external surfaces complete all as specified and directed by Enginner-in-Charge

Removing raw sludge, pumping out the sewage below foot valve/ground level the bottom of the Equlizer tank (MRC ST Plant) of any size including scrapping brushing side walls bottom slab underneath of roof slab of side walls of Equlizer tank removing algea sludge and cleaning with fresh water and flushing out from the bottom including one coat of white washing internal surfaces complete all as specified and directed by Enginner-in-Charge

Removing sludge, pumping out the treated water below foot valve/ground level the bottom of the Treated water sump (MRC ST Plant) of any size including scrapping brushing side walls bottom slab underneath of roof slab of treated sewage water sump bottom side walls of sump removing sludge any other materials and cleaning with fresh water and flushing out from the bottom including one coat of white washing internal surfaces and One coat of colour washing external surfaces complete all as specified and directed by Enginner-in-Charge

Dismantling the blocked DI flanged Pipe and specials of any size of any length from sewage lift well, clarifier, Equlizer tank and Sludge pump set to drying beds removing and disposal of the blocked materials, solids sludge cleaning externally and internally suitable and refixing DI pipe and specials including replacing gaskets bolts and nuts with wahsers and testing complete all as specified and directed by Engineer-in-Charge

Removing sludge, pumping out the sludge from bottom level of the clarifier (MRC ST Plant) of any size including scrapping brushing side walls bottom slab underneath of roof slab of clarifier bottom side walls of sump removing sludge any other materials and cleaning with fresh water and flushing out from the bottom including one coat of white washing internal surfaces complete all as specified and directed by Enginner-in-Charge

M&L for framed work such as grills,gratings, etc.. with ends of barsshouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors,ladders; framed balusters; walkways; railings; framework ofwater tanks and similar workcon- forming to Fe.290.Gde-E-165 as per site requirement including taking down the rusted MS ladder,railings/any Iron frame work from UG sump/Pump house plant complete all as specified and directed

Carryout laboratory analysis test of treated and sewage samples analysis test results of the PH value total dissolved solids, total suspended solids, chemicals oxygen demand bio chemical oxygen demand oil and grease to be submitted to department as received from laboratory for STP (MRC)

M&L for preparation of old wall surfaces by brooming down with steel wire brushes, scrapping down smoke spot moulds, moss efflorescent salts and treating oil and greasy spot and applying two coat of white wash on old decorated surface of walls complete all as specified and directed by Engineer-in-Charge.

All as per Srl item No.109 above but one coat of white wash on ceiling.

M & L for complete removal of existing treatment from walls surface by scrapping of old decorated walls etc properly making of 'V' shaped crackes and filling of all crackes with crackes seal of wall etc and applying two coats of exterior emulsion paint over one coat of exterior wall primer complete all as specified and directed by Engr-in-charge. Make: Asian ACE or equivalent make as approved by GE.

S&F in replacement glow sign board for E/M installations with computerised words printed in PVC board matter and size of lettters as approved by Engineer-in-Charge) including fabrication of work, angle iron, elecgtrical connection with suitable copper wires and LED fittings complete all as specified and directed

S&F replacement of rusted sign board from existing locations with new fabricated and polishing stainless stell board stand of frame of size SS heavy pipe 50 mm dia pipe work for fixing 'ACP" Sign board (Aluminium compost panel) of size 1.6mx1.3, m mm thick with in the SS frame of size SS heavy pipe 20 mm dia pipe work and SS ball of dia not less than 50 mm on SS stand including writing details of installations/ Machinery details etc with both sive vinylpasting on radium stricker letters complete all as specified and directed by Engineer -in-Charge Note: Matter of letters and size of letters as approved by Engineer-in-Charge

M&L for construction of brick masonary valve pit chamber including necessory earth work,PCC,copping plastering on internal surface of valve pit, framed work for the valve pit chamber cover made of MS sheet angle equal angle 40mmx40mmx5mm and MS sheet 3 mm thick confirming to Fe410-0 and Fe 310-0 including welding cutting hinjes locking arrangement complete and two coated synthetic paints applied on the valve pit cover all specified drawing and directed by Engr -in charge the following sizes:-

1200mmx1200mmx1000mm

1500mmx1500mmx1000mm

M/S Sai supplier

SHRI RAM ELECTRICALS ENTERPRISES

shivansh traders