Loading
Loading…
Loading…
Tender Value
₹22.9 L
EMD Value
₹28,700
Closing Date
28 Sept 2026, 6:00 pmDue tomorrow
Area Engineer(E and M)
Office of the General Manager Pandaveswar Area , P.O. Pandaveswar, Dist.-Paschim Bardhaman, West Bengal-713346
Strengthening the headgear structure as per the structure stability test report and recommendations to comply DGMS violations through fabrication work using different sizes of MS material for safe and smooth winding operations at Pit No 2,5,6 at MSAM
2026_ECL_365434_1
GM-PND/EandM/26-27/91/2569 dated 10/09/2026
Open Tender
Electrical and Maintenance Works
Item Rate
60 days
MSAM Colliery
Please refer Tender documents.
5 documents required · 5 mandatory
₹28,700
28 Sept 2026
14 Sept 2026
29 Sept 2026
14 Sept 2026
28 Sept 2026
14 Sept 2026
14 Sept 2026 - 17 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Strengthening the headgear structure as per the structure stability test report and recommendations to comply DGMS violations through necessary qualitative fabrication work using different sizes of MS material(IS-standard) for safe and smooth winding operations at Pit No. 2, Pit No. 5, and Pit No. 6 under MSAM Colliery. (Inclusive of EPF/CMPF) | |||||
| 1.01 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 5,687.2 | Kgs | - | - |
| 1.02 | Structural Stability test of head gear structure of all 3 pits from NABL certified LAB incuding test report to mitigate violations | 3 | Nos | - | - |
| 1.03 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work | 250 | Square Meter | - | - |
| 1.04 | Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works | 250 | Square Meter | - | - |
| 1.05 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil. | 203.39 | Cubic Meter | - | - |
| 1.06 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | 156.2 | Cubic Meter | - | - |
| 1.07 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. | 4.95 | Cubic Meter | - | - |
| 1.08 | Supplying and laying polythene sheet (125 micron) below RCC or PCC | 66 | Square Meter | - | - |
| 1.09 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete. | 352 | Square Meter | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Tendernotice_1.pdf
PDF • 2.33 MB
Tendernotice_2.pdf
PDF • 2.78 MB
Tendernotice_3.pdf
PDF • 0.38 MB
BOQ_378365.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .