SPECIAL REPAIR TO TOILET NEAR BY BLDG NO 35 AND 71 RA LINE AT 148 LT AD REGT (COMP), PROVN OF 04 X CATTLE TRAPS IN AOR OF GE (N) , PROVN OF GUARD ROOM WITHOUT BATHROOM AT RP GATE AT 75 MED REGT, PROVN OF 04 X CATTLE TRAPS CERTAIN LOCS AND PROVN OF 20

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified & directed

Demolition cement concrete of ground floor n exc 15 cm thickness(below or above ground level) complete.all as specified & directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete.all as specified & directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each.complete.all as specified & directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each. complete.all as specified & directed

Taking down cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete.all as specified & directed

Dismantling OH water tank of capacity exc 250 litres but not exceeding 500 litres and removing from site complete.all as specified & directed

Demolition and breaking up drain pipes of dia 100mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete.all as specified & directed

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil as specified & as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L, Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surface etc complete.all as specified & directed

M & L for Treating the top surface of filled earth at the rate of 7.50 litres of emulsion per square metre of surface complete.all as specified & directed

M & L for Treating the backfill in contact with foundation at the rate of 7.50 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured) complete.all as specified & directed

M & L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete.all as specified & directed

M & L for approved soil filling under the floor, spreading and levelling in layers n.exc. 25cm thick, well ramming including watering as required complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base of flooring complete.all as specified & directed

M&L for 75mm thick cement concrete 1:4:8, type D2(40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.

M&L for Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete all as specified & as directed

M &L for Cement concrete in foundations, filling and mass concreteType C2 1:3:6 (40 mm graded aggregate)complete all as specified and directed.

M&L for RCC M-25(20mm graded aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, complete.all as specified & directed

M&L for RCC M-25(20mm graded aggregate) for columns, pillars, pierrs, posts & struts etc complete.all as specified & directed

M&L for RCC M-25(20mm graded aggregate) for beams cantilevers bressumers, lintels over 1.5m span etc complete.all as specified & directed

M&L for RCC M-25(20mm graded aggregate) for slab supported on walls, beams and columns in floors, roofs, landings balconies canopies, deck slab and in shelves and the like etc etc complete.all as specified & directed

M&L for form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal on fair finished surfaces in shape complete.all as specified & directed

M&L for flat form work to sides and soffits of floors or roof beams haunching, girders bressumers, lintel ,cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc on fair finishedd surfaces complete.all as specified & directed

M&L for flat Form work to soffits of suspended slab such as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etc on fair finished surfaces complete.all as specified & directed

M&L Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete raillings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete on fair finished surfaces.all as specified & directed

M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter on fair finished surfaces complete all as specified and directed.

S&F mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and directed.

S&F mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete.all as specified & directed

S & F Steel work in tubular trusses etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete.all as specified & directed

S&F plates (plain or chequred) channel , square, cut or notchednordinaryband counter sunk) forming holes, without any attachment complete.all as specified & directed

S&F framed work as in doors or gates of angle or other section with gussets plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering, Doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel, sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete conforming to Fe-290 Gde- E-165 complete all as specified & directed..

S & F pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 125x60mm made out of 1.25mm MS sheets complete all as specified & directed.

S&F steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing complete with glazing bars, dovetailed or welded complete all as specified & directed.

S&F steel ventilator with top hung shutter includng hinges , steel peg stay complete.all as specified & directed

S&F 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats complete all as specified & directed.

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, complete.all as specified & directed

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete.all as specified & directed

S&F powder coated anodised aluminium windows /Ventilators with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh shutter and glass shutter fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, grill with one or more rebates with and including 4.00 mm thick black glass complete all as specified and directed.

S & F 150mm size aluminium alloy handles cast type anodized complete all as specified & directed.

S&F stainless steel heavy weight butt hinges 100mm in size complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section of 150 mm long complete.all as specified & directed

S&F mild steel sliding door bolts, 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed. complete.all as specified & directed

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple complete.all as specified & directed

S&F 3.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete.all as specified & directed

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete.all as specified & directed

M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete.all as specified & directed Note:- Serviceable bricks obtained from Ser Item No. 1 shall be reused

M&L for 5 mm thick rendering on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3),complete.all as specified & directed

M & L for 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M & L for 15 mm thick rendering using ready mix plaster bags in CM 1:4 on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 200ml per cement bag or as per manufacturer instructions, complete all as specified and directed : Note:- Water proofing compound shall be measured and paid sepratly

M&L rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:6, surface finsihed even and smooth without using extra cement complete all as specified & directed.

Supply only LIQUID water proofing compound complete all as specified & directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4, surface finsihed even and smooth without using extra cement complete all as specified and directed

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggragate as in bed blocks, coping plinth protection etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete.all as specified & directed

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cement to match laid over and including 15 mm thick screed bed in cm 1:6 complete.all as specified & directed

M & L for Coloured Glazed colour ceramic tiles in vertical surfaces 450x350x7mm/350x250x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick plaster in CM(1:4) joint free with grout of matching shade complete.all as specified & directed

M&L for 60mm thick Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 M-35 grade complete.all as specified & directed

M&L for water proofing treatment to roof slabs by providing 10mm thick bedding layer of cement morter 1:3 mixed with water proofing compound as per manufacturer's instruction and applying one coat of bituminous/polymerized primer confirming to IS-3384 @ 0.30 Ltr/Sqm and applying of one coat of bonding material using blown type bitumen conforming to IS-702 grade 85/25 @ 1.20 Kg/Sqm and laying of actetic polypropylene (APP) modified membrane pre-fabricated, reinforced with non-woven polyester of 3.50Kg/Sqm (minimum), 3mm thick (minimum), with minimum 75mm side overlaps and 100mm end overlaps and applying one coat of bituminous aluminium paint over APP membrane complete including taking down existing water proofing treatment with bedding layer of cement mortar complete all as specified and as directed.

M&L for dubbing out average 20mm thick on irregular faces of walls and ceilings in CM 1:4 complete.all as specified & directed

M & L for repairs to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. (Height of work to be considered above 3.5m and upto 7m from FFL of Ground Floor.) complete.all as specified & directed (Note : Wherever reinforcement is required to be provided will be paid separately under relevant item and contractor have to inform the department one day in advance after binding of reinforcement for measurement otherwise no payment will be considered on this account)

M& L for preparing plastered new surfaces of ceiling and applying three coats of white wash on ceiling surface complete.all as specified & directed

All as described in ser item No. 66 here-in-before but two coats on old ceiling surface complete.all as specified & directed

M & L for preparation of new plastered surfaces of walls etc and applying two coats of cement base paint over a coat of primer complete all as specified & directed.

M & L for Preparation of new plastered surface of wall by applying 1.00mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified & directed.

M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel over one coat of primer complete.all as specified & directed

M & L for Preparation of new wooden surface of any description and applying two coat of synthetic enamel paint over a coat of pink primer over 10cm width or girth complete.all as specified & directed

Taking up or down steel tubing and connection 15 mm bore pipe complete.all as specified & directed

All as described in Sl Item No.72 here-in-before but 20 mm bore pipe.

Supplying and laying CPVC 20mm outer dia pipes (concealed) SDR 11 & Plain CPVC SDR 11, with all fittings (including brass fittings/fixtures) and fixed on walls/ceiling (concealed) or laying in floors complete.all as specified & directed

Supplying and laying CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete.all as specified & directed

S&F triple layer white colour 500 litres Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes complete.all as specified & directed

S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete.all as specified & directed

S & F PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

S & F 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste complete all as specified & directed.

S & F 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls and floor etc. as in waste and rain water pipes complete all as specified & directed.

S & F PVC bends 75mm bore, any radius complete all as specified & directed.

S & F PVC bends 110 mm bore, any radius complete all as specified & directed.

S&F 110mm PVC (SWR) vent cowl complete.all as specified & directed

S&F 110 PVC (SWR) junction single, (Single T) equal or unequal complete.all as specified & directed

S & F 110mm PVC (SWR) 'S' trap complete.all as specified & directed

S & F stack clamps made out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete.all as specified & directed

S &F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete.all as specified & directed

S&F 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 20mm dia pipe fixed in repair complete.all as specified & directed

S&F in repairs bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete.all as specified & directed

S&F in repairs 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union complete.all as specified & directed

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

S&F in repairs Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete.all as specified & directed

S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed.

S&F in repairs ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete.all as specified & directed

S&F in repairs ,PVC(SWR) gully trap, 125/110mm bore, plain with grating including jointing with solvent cement. complete.all as specified & directed

S&F in repairs CP brass soap dish complete.all as specified & directed

S&F in repairs Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete.all as specified & directed

S&F in repairs Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 25 mm dia complete.all as specified & directed

S&f in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete.all as specified & directed

S&F fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

S&F in repairs chromium plated towel rail 20mm dia D type 600 mm long complete all as specified and directed.

S & F PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., 32mm bore suitable for wash hand basins/sinks complete all as specified & directed

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed

M & L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly complete all as specified and directed for the followings :-

One tube light/Bulb/ exhaust /fan point street light point controlled by one, one way switches 5/6 amps

One 3 pin 5/6 Amps socket outet on independent board, controlled by one way 5/6 Amps switch.

One 3 pin, 05 / 06 Amps socket outet point on same board, controlled by one, one way 5/6 Amps switch

M&L for point wiring with 2.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated, unsheathed copper conductor,FR, cable in and inrigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all steel conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, unsheathed 2.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic laminated sheet screwed with brass screws, cup washers complete all as specified and directed for the following :- (a) One 3 pin socket outlet, 15 amps, with cables 2.5 sqmm size on independent board, controlled by one, one way 15 amp switch.

S & F switch piano flush button single pole one way 05 Amps complete all as specified & directed.

S & F socket outlet 3 pin, 05 Amps flush type complete all as specified & directed .

S & F switch piano flush botton single pole one way 15 Amp complete all as specified and directed

S & F socket outlet 3 pin, 15 Amp, flush type complete all as specified and directed

S & Fceiling rose surface type, bakelite, 65x 50 mm , 03 terminal complete all as specified & directed .

Supply & fix LED lamp 9 W 6500k,240V complete all as specified and directed.

S & F LED lamp 2 pin 12 watt complete all as specified and directed.

S & F lamp holder insulated body with back plate fix done anodised 100 x 100 mm pressed steel box flush to the wall with 3 mm thick backlite cover complete all as specified and directed.

S & F lamp holder (angular/straight), insulated body, with back plate complete all as specified and directed.

S & F LED light fitting 20 watt, 220 V, AC decorative box type with driver , holder including LED tube light conneting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed.

S & F LED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed.

S & F LED tube light fitting T/5 surface mounting poly carbonate batten 240 volts 10 watts, 6500K complete all as specified & directed.

S & F Building security light fitting 1 x 35W LED type, drawn through and including GI bracket of size 25 mm dia bore light grade 1.4 mtr long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm - 02 Nos and necessary nuts, bolts, washer as required complete all as specified and directed.

S&L XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade cross sectional area of 10 sqmm 2 core complete all as specified and directed

Supply and spreading clean fine dry river sand in trenches for cushioning of under ground cable/ cable duct complete all as specified and directed. Note: Only punned thickness shall be measured for payment purpose.

M & L for fly ash brick protection length of brick shall be laid across the length of cable) complete all as specified and directed.

M & L for GI light grade tubing 40mm dia laid in trenches, road crossing , pasing through pipe or laid in wall/pole complete all as specified and directed

S&F Exhaust fan steel body AC single phase 230/240V size 300 mm sweep with blades, and louvers.

S & F sheet metal enclosure single pole & neutral for 240 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door.

S & F sheet metal enclosure double door, single pole & neutral AC, 240 volts 8 way with 200 Amp rated copper bus bar and IP-43 protection with mtal double door and flush to wall including all cutting on wall and making good including two coats of hite /colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

S & F MCB single pole 240 volt 6 to 32 amps 10 KA complete all as specified and directed

S & F MCB SPN 40 Amps, 240 volts, 50 Hz suitable for fixing in MCB DB 'C' series complete all as specified & directed.

S & F double pole isolator 240 V, 40 A and making connections complete all as specified & directed.

M & L for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. NOTE:- incl main earthing GI wire from earth electrode to test point upto 7.5 metres.

S & F in repairs solar LED street light fittings 20 watt with 40 AH Battery bank, PV solar panel fitted on charge controller with dusk down sensor complete with and including 5 Mtr steel pole with base plate including foundation bolts, braket, clamps, nuts etc complete all as specified and directed. Note:- Necessary excavation/earth work, PCC/RCC work will be measured and paid separately under relevant item of schedule.

M & L for providing PCC 1:4:8 type D-2 , using 40 mm graded stone aggregate as in foundation for eraction of poles complete including bracking and removing the old concrete complete all as specified and directed.

M & L for providing PCC 1:2:4 type B-1 , using 20 mm graded stone aggregate as in coping to pole etc, including breaking and removing the old concrete and providing necesssary form work complete all as specified and directed.

A.V. ASSOCIATES (BID ID -3276532)