FH2_CCGGN

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (HSR item No.30.22)

Distempering with 1st quality acrylic distemper (Ready mix) having voe content less than 50 grams/ litre of approved brand and manufacture to give an even shade:Old work (one or more coats) (HSR item No30.25.1))

Finishing walls with Acrylic Smooth exterior paint of required shade: Old work (One or more coat applied @ 0.90 litre/10 sqm). (HSR item No30.37.2)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade (HSR item No. 30.28.1) One or more coats on old work

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge HSR item No. 5.7)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (HSR item No.5.45)

12 MM cement plaster 1:4 fine sand (1cement +4fine sand) complete in all respect (HSR item No.11.5.3)

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. (HSR item No.8.14)

Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete(HSR item No.9.10.1) With residual type petroleum bitumen of grade VG -10

Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1 :4 (1 cement: 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1 :4 (1 cement : 4 coarse sand) and finished neat complete. (HSR item No 9.15)

S.S wire mesh 32 gauge fly mesh with 144 holes per square Inch including 10% wastage (B0712)

1.0 mm thick decorative laminated sheet (B0904)

Vitreous china flat back wash basin 630x450 mm (B1279)

Vitreous china Indian type W.C. pan of size 580 mm (B1284)

Flushing Cistern P .V.C. 1 O litre capacity (low level) (White) (with fittings, accessories and flush pipe) (B1455)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. (hsr ITEM No. 5.43)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1 :4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete (HSR item No. 10.57)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : sqm 235 368 603 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1 :3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (HSR item No. 10.58)

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 confonning to IS: 2222 in foundation and plinth level four level in cement mortar 1 :6 (1 cement : 6 coarse sand) : (HSR item No. 7.20.2)With Modular bricks

Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos/ Lindane emulsifiable concentrate of 20% (HSR item no. 4.38.1)

Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor:With Chlorpyriphos/Lindane E.C. 20% (HSR item No. 4.40.3.1)

Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. (HSR item No4.40.5)

Credit of Masonary

YASHWANT CONTRACTOR