Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹5.8 LAccepted-AOC | 1 | Accepted-AOC being lowest | |
| 2 | 2₹6.0 L+₹22,960.70 (3.99%)Rejected-Finance | 2 | Rejected-Finance being not lowest |
Tender Value
₹5.7 L
EMD Value
₹11,500
Closing Date
12 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I AF JAIPUR
AGE I AF JAIPUR OPP JAL MAHAL AMER ROAD
PROVISION OF EMERGENCY EXIT LADDER, IRON COLLAPSIBLE GATE AND WIRE MESH WINDOWS OF NFS BLDG AT AF STATION JAIPUR
2023_MES_612296_2
8437/E8
Open Tender
Civil Works - Others
Item Rate
180 days
AGE I AF JAIPUR
Class E and above and category a (i)
7 documents required · 7 mandatory
₹500
AGE I AF JAIPUR
₹11,500
4 Dec 2023
18 Sept 2023
16 Oct 2023
18 Sept 2023
12 Oct 2023
25 Sept 2023
Amount
Excavation in trenches n exc 1.5m wide and not exc 1.5m depth , for foundation etc or for shafts, manholes, etc not exc 1.0 sqm on plan and not exc 1.5m depth and getting out in hard/dense soil all as specified and directed.
Excavation over area not exceeding 1.5 m deep and getting out in hard/dense soil complete all as specified.
M&L for PCC 1:4:8 type D-2 as in base or foundation filling and mass concrete complete as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.
Removing excavated material exc 5Km but 15Km and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.
M&L for mild steel TMT bars as in reinforcement, 10mm dia and over cut to length, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for mild steel TMT bars 5 to 10mm dia bars as in stirrups, spaces and binders cut to length, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S & F Mild steel rag or lewis bolts, 25mm dia of neck screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, exc 30 cm long complete all as specified and directed.
M&L for reinforced cement concrete, nominal mix, type B-1, 1:2:4, using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for a rough finished surfaces all as specified.
S&F mild steel angle iron, flats, MS pipe, square/round bars or any other sections as in stairs, (framed) including stringers, treades, landing, baluster, hand rails etc including cleats, brackets including cutting in any length, welding etc confirming to Fe-410-W, Gde-E-250 quality-A complete all as specified and directed.
S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets complete all as specified and directed.
S&F mild steel box type windows with side hung shutters (wire guage or glazed shutter) including projecting type hinges with steel handle and steel peg stay, complete with sash bars glazing bars, dovetailed or welded to receive wire gauge or glass complete all as specified and directed.
S&F steel ventilator with top hung shutter including hinges steel peg stay complete all as specified.
S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and directed.
S&F Figured glass, pin head type, 3mm thick and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening, sliding bolt, tower bolt etc confirming to Fe-290, Gde-E-165 complete all as specified and directed.
S&F 1 mm thick mild steel, plain black sheet in wall cladding, steel gates, water troughs, ducts and similar works, cut to size, edges, beaded if directed, hole punched, including round headed screw, clout nails or rivets and fixed to wood or steel member etc with plain 40 mm lap joint or welded/riveted seams including bending or turning up mitred angle etc as required complete all as specified and as directed.
M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or grith complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over and including a coat of red oxide zinc chrome primer complete all as specified and directed.
M&L for cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed.
M&L for forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work in cement mortar 1:4 complete all as specified and directed.
M&L for brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.
M&L for 40mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in flooring, finishing cement concrete surface even and smooth with using extra cement complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in floors for levelling concrete complete all as specified and directed.
M&L for coloured chequred cement concrete tiles 20 cm x 20 cm x 25 mm thick, set, jointed and pointed with white cement and pigments in floors over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying of floor finished complete all as specified and directed.
Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.
M&L for 15mm thick rendering on fair faces of brick work or concrete surface in CM (1:6) complete all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick work or stone masonary in CM (1:4) surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for non skid, joint free, coloured ceramic tiles 7-8mm thick (Square/Rectunglar), area of each tile exc 0.06 Sqm but not exc 0.11 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for coloured, joint free, glazed ceramic tiles size 350x250x7-8mm or 450x350x 7-8mm thick as in vertical surfaces like dado/ skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, laid with and including over 10mm thick rendering in CM (1:3) all as specified and directed.
Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.
Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge.
S&F 100mm long butt hinge, extruded aluminium alloy with galvanized mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as directed and specified.
S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed and specified.
S&F vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, ( excluding fixing bolts, flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc complete all as specified and directed.
S&F vitreous china wash hand basin, white, flat back, size 550 x 400mm excluding taps, chain and plug and porcelain stopper but including cutting for and pinning in ends of with and including brackets, PVC waste pipe & CP waste coupling OF 32mm dia complete all as specified and directed. Note : Rate quoted under this item deemed included fixing of taps, plug and chain and connecting up to supply pipes, wastes or traps etc.
S&F vitreous china bowl urinal flat back size of 465 x 355 x 265 mm, white with grating, union for discharge pipe on bracket excluding flushing cistern, flush pipe complete and all as specified and directed.
S&F 15 mm bore bib taps, chromium plated, fancy type, cast copper alloy with crutch handle, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, Fancy type screwed down for pipe, high pressure, with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.
S&F 15 mm bore stop valves, fancy type, chromium plated, cast copper alloy, long shank and cup (concealed type) screwed down, high pressure, with crutch handle, screwed externally both ends for unions etc. and fixed complete all as specified and directed.
S&F chromium plated brass tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed.
S&F mild steel chromium plated health faucet (ABS Body) suitable for 15 mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed.
S&F PVC valveless, symphonic action type low level flushing cistern white with inlet ball valve, float and handle including brackets, 10 ltr capacity complete with flush pipe(Long bend) 32mm dia of make as approved by AGE complete all as specified & directed.
S&F 20mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F fancy type chromium plated bib cock 2-way, double handle with flange complete all as specified and directed.
S&F 450 mm long PVC connection 15 mm size with PTMT nuts complete all as specified and directed.
S&F 15mm bore galvanised steel water tubing (GI pipe), medium grade with all fittings and fixed to wall, floor and ceiling complete all as specified and as directed.
S&F 20mm bore galvanised steel water tubing (GI pipe), medium grade with all fittings and fixed to wall, floor and ceiling complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tank of 1000 litre capacity, triple layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings and 20mm bore (minimum weight 210gms) ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball complete all as specified and as directed.
S&F PVC (SWR) floor trap, out let dia 75mm, plain with grating including jointing with solvent complete all as specified and as directed.
S&F PVC (SWR) pipes, 75mm bore single socketed in any length with rubber ring joints and laid in trenches or in floor complete all as specified and as directed.
S&F PVC (SWR) pipes, 110mm bore single socketed in any length with rubber ring joints and laid in trenches or in floor complete all as specified and as directed.
S&F PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.
S&F PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed.
M&L concrete bed to pipes in PCC (1:3:6) type C2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid on slope and tested for 100mm bore sewer pipe line complete all as specified and directed.
M&L for cutting into existing manholes for connecting new drains of 150mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
M&L for precast RCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in cover slab set in CM 1:6 including necessary fair finish formwork complete all as specified and directed.
M&L for point wiring for one light point or one fan point controlled by one way switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable FR, 1100 volts grade drawn through PVC casing caping including necessary accessories like bends, tees, elbow etc fixed on wall/ceiling including second class hard wooden board /sunken type MS box/PVC Gang Box of suitable size with 3 mm thick plastic laminated white coloured sheet top cover and using 1.5 Sqmm (nominal area) stranded copper conductor single core, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.
S&F for Modular switch one way 6 Amp, 1 module complete all as specified.
S&F for ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete all as specified.
S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 25mm complete all as specified and directed.
Cutting existing steel tubing of 40mm or 50mm bore for alterations or additions (Each cut measured) complete all as specified and directed.
LAKSHMI ASSOCIATES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .