Estimate for Repair of Dedhna Ziledari at Hamjheri Canal Rest House

Amount

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (Doors of area 3 sqm and below.)

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (windowsof area 3 sqm and below.)

Supplying Pressed steel sheet frames (Chowkat) consisting of 18gauge (1.25 mm thick steel sheet of the specified section, including iron hugs (hold fast) iron hugs conforming to PWD specification including bolts for fixing stops lock notch provision for receiveing tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete.(Doors and windows frame of size 118mm x 60mm with 40 mm wide single rebate weighing 3.43 kg per meter.)

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 3mm or 8.44 kg per sqm upto 0.4 sqm area

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area

Wire Gauge 22 gauge 12x12 mesh of (140 G gauge) at site of work .

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. 25mm i/d

Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect ( 25mm i/d G.I. Union)

Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.( 25mm i/d Brass Ball valves )

Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects. (25mm internal diametre pipe line)

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.( C.P.brass 20mm concealed stop cock with flange)

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect( G.I. tank nipple 25mm i/d)

Dismantling Sanitary fixtures such as Eurpoean /Indian/ Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. (Eurpoean/Indian/Orissa W.C.)

Dismantling Sanitary fixtures such as Eurpoean /Indian/ Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. (PVC / China Ware Cistern)

Dismantling Sanitary fixtures such as Eurpoean /Indian/ Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. (Wash Hand Basin / Urinal Pot)

Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing jet spray with 2‘-6" long PVC pipe. (With PTMT nut)

Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.

Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect.

Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. (C.P brass towel ring)

Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge ) complete in all respect.( C.P. brass Bib cock long nose/long body foam flow without flange)

Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the pproval of Engineer-incharge )with various fixtures complete in all respect. (C.P. Brass extension piece, 25mm longto 50mm long)

Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. (C.P.brass 15mm Angle valve without flange)

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. (Size 450mmx300mm)

Providing and fixing plastic hygenic seat cover with lid complete. (Plastic Seat Cover Premium star white/pastel/special colour)

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. (Size 550 mm x 400 mm x 815mm)

Scraping (c) cement plaster

12.5 mm thick cement plaster 1:4

Dismantling brick work tile, masonry or tile lining (in Cement)

Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16

Scraping of White wash and colour wash

Distempering with dry distemper of approved manufacture two or more coats over one priming coat to give an even shade

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint

Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp., 16Amp. universal sockets, 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Brass Screws, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material and repair of chases (with finsihing the surface) - Wiring fan point (Without fan box)

Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp., 16Amp. universal sockets, 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Brass Screws, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material and repair of chases (with finsihing the surface) - Wiring light point

Replacement of PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in existing heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with (Flush/ Piano type accessories) Step type electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp., 16Amp. universal sockets, 6/16/20Amp. Switches etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Brass Screws, bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material and repair of chases (with finsihing the surface) - Wiring 6Amp. wall socket point

Supply and erection of switches, sockets and other accessories (flush piano type/modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc. - One Way 6amp. Switch Flush Piano type

Supply and erection of switches, sockets and other accessories (flush piano type/modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc. - 5pin 6amp. Wall Socket Flush Piano type

Supply and erection of switches, sockets and other accessories (flush piano type/modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc. - 16amp. Universal Wall Socket Flush Piano type

Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16/18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface): (Powder Coated Concealed Metal Box with Brass Lugs Three Module)

Red meranti Sinker quallity (20 to 21 kg per cft. Approx.) doors shutter windows shutter including hinges, screw and cords etc. Complete fixed in position(40 mm )

DARSHAN SINGH KALER AND COMPANY (BID ID -698843)