PROVN OF TOILET BLOCK FOR CANDIDATES IN 331 SSB LINE FOR SCN AND OTHER SANCTIONED WORKS UNDER GE (WEST) JRC

Amount

Surface dressing not exceeding 15cm deep in soft/loose soil. complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep in soft/loose soil for foundation, not exceeding 10 Sq.m area on plan and for similar works and getting out complete all as specified and as directed by the Engineer-in-Charge.

All as per above item for each additional 1.5m or part thereof in depth beyond the first 1.5 m

Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing the surplus excavated materisl/soil to a distance not exc 50Mtrs and depositing, where directed at a level not exceeding 1.5 Mtr above the starting point all as specified and directed.

Material & labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work finished even and smooth with out using extra cement complete all as specified and directed

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of cement primer all as specified and directed.

Material & labour for15mm thick rendering in cement mortar 1:6 on fair faces of brick work, finished even and smooth with out using extra cement complete all as specified and directed

Material and labour for preparation of walls/ ceiling and applying two coats of oil bound distempering over one layer (1mm thick) of Birla putty complete all as specified and directed.

Material & labour for 5mm thick rendering in cement mortar 1:3 on fair faces of brick work, finished even and smooth with out using extra cement complete all as specified and directed

Material & labour for three coats of white wash on newly plastered surfaces of ceiling including prepration of surfaces complete all as specified and directed.

Material and labour for TMT bars 10 mm dia and over cut to length bent to shape reqd. including cranking, bending and binding with ms wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Mild steel TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Reinforced cement concrete M-25, using 20mm crushed graded stone graded aggregate as in slab supported on wall beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for form work to soffits of suspended slabs such as roof slabs, floor slabs, shelves, landing, sides of chajjas and similar work not exceeding 200mm thick (horizontal or sloping) including edges, complete all as specified and directed.

Material and labour for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Material & labour reinforced cement concrete M-25, using 20mm crushed gared stone graded aggregate in footings, foundation beams; plinth beams; bases for columns etc. complete all as specified and directed.

Material and labour for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

Material and labour for reinforced cement concrete M-25, using 20mm crushed graded stone graded aggregate in pillars, columns, piers, posts complete all as specified and directed.

Material and labour for form work to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified.

Material and labour for reinforced cement concrete M-25 grade (20mm aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed

Material and labour for RCC Type B0 1:2:4 (12.5mm graded aggregate) in Chajjas complete all as specified and as directed

Material and labour for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast RCC manhole / septic tanks ,drain,covers including all form work and setting in CM 1:4 all as specified

Material and labour for 75 mm thick cement concrete (1:3:6) type C-2, using 40mm graded crushed stone aggregate as in plinth protection, surfaces finished even and fair without using extra cement complete all as specified and as directed.

Supply & fixing 75mm dia PVC (SWR) floor trap with grating including joining to waste pipe fixed in solvent cement in any position complete all as specified and directed.

Supply & fixing 15mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified.

All as per Ser item No 28.00 above but for 20mm bore tube

Supply & fixing Brass CP mixer tap for mixing hot & cold water screwed down for 15 mm dia iron pipe and fixed complete all as spd and as directed

Supply & fixing Bib tap fancy type cast copper alloy suitable for 15mm bore iron pipe with long body fancy type complete

Supply and fixing pillar tap, fancy type, CP mixer for mixing hot & cold water screwed down for iron pipe and fixed all as specified and directed.

Supply, hoist and fix in position; 1000 litres capacity rotational moulded polythene water storage tank (cylindrical, vertical with closed top) ISI marked (Name of firm embossed or engraved on the body of tank) conforming to IS 12701, double layered including dismantling the existing tank complete all as specified.

Supply and fixing 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density polythene ball screwed for iron pipe (Min for 20mm – 210 gm) complete all as specified and directed.

Supply and fixing 20mm Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe and fixed.

Supply and fixing vitreous china wash hand basin, white, flat back size 550mmx400mm including cast iron or mild steel brackets including cutting for and pinning in brackets complete all as specified and as directed.

Supply and fixing 10 litres capacity PVC valve less symphonic action type, flushing cistern, low level, white with inlet, ball valve, PVC flush pipe, float and handle including brackets complete all as specified.

Supply and fixing vitreous china wash down water closet pan (pedestal pattern), white, and connection to drain (or outgoing pipe) and connection to flushing pipe, anti-syphonage pipe, (excluding flusing cistern and flush pipe) etc complete all as specified and as directed.

Supply and fixing vitreous china bowl urinal, half stall, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, etc all as specified and directed.

Supply and fixing brass chromium plated towel rail 20 mm dia, 600mm long fixed with chromium plated brass screws wooden/plastic gutties complete all as specified and directed.

Material & labour for Non skid Coloured ceramic tiles 7 to 8 mm thick (square or rectangle) area of each tile exce 0.11 SqM but not exceeding 0.18 SqM in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with including screed bed in CM 1:4, 15mm thick for laying floor tiles,haucking old concrete surfaces and applying cement slurry 3.0 kg per Sqm.

Material & labour for Glazed ceramic tiles in vertical surface 450 X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in CM 1:3 15 mm thick

Supply & fixing 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints jointing with adhesive to wall/laid in trenches complete all as specified and directed.

Supply & fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints jointing with adhesive fixed in repair to wall/laid in trenches complete all as specified and directed.

Supply & fixing for 75 mm bore PVC (SWR) bends in any radius complete all as specified and directed.

Supply & fixing for 110 mm bore PVC (SWR) bends in any radius complete all as specified and directed.

Supply & fixing grating 75mm dia with centre hole all as specified and directed by Engr-in-Charge

Supply & fixing Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed by Engr-in-Charge

Supply & fixing PVC solid door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinfoced with MS square tube, suppling and fixing in opening as per specification and drawing.

Supply & fixing factory made solid panel pvc door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing.

Supply and fixing aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Supply & fixing Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified complete all as specified

Material and labour for 5.5mm thick sheet glass ordinary quality including solar control film 25 micron reflective type sticked on glass pane as per instructions of manufacturer and glazing fixed with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Supply & fixing 100mm size butt hinges extruded aluminum alloy with galvanised mild steel hinge plate

Supply & fixing Aluminum anodized barrel tower bolt of extruded section of size 150mm

Supply & fixing extruded Aluminum alloy handle fabricated of size 150mm

Supply and fixing of PVC (SWR) junction single (single Tee) equal or unequal, dia of pipe 75mm complete all as specified and directed.

Supply & fixing 15mm stop valves/Angle cock , chromium plated fancy type, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions

Material & labour for PVC connection fiber, reinforced 45cm long with brass check nut and PVC washers at both ends complete

Material & labour for 40 mm thick Damp proof course in Cement Concrete 1:2:4 type B-0 in horizontal/vertical surfaces including necessary formwork and applying evenly a coat of blown type bitumen @ 1.5 kg/Sqm and blinding with clean dry sand @ 0.05 cum /sqm

Material and labour for Cement concrete 1:4:8 type D-2, using 40mm graded stone aggregate as in foundations, mass concrete complete all as specified and directed.

Material and labour for Reinforced concrete pipes, class NP2, laid and jointed completewith collars with bore of pipe 150mm .

Material and labour for cutting into existing manholes for connecting new drains, making good to open and rendering, cutting out existing benching for forming branch, channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 and making good pipe and reforming benching as required finishing even and smooth complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in concrete bed to 200mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Material and labour for sand cushioning to under concrete interlocking paver block including watering & consolidation complete all as specified and directed

Material and labour for 80 mm thick M-40 factory made machine pressed precast inter locking paver block any size and shape as approved conforming to IS-15658-2006 laid over and including consolidated layer of sand 25mm thick (compacted thickness) and the joints filled with fine sand complete all as specified and directed.

Material and labour for Granite 25mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B-1 using (20mm graded aggregate) as in benching and the like weathering slightly rounded or chamfered angles and throating complete all as specified and as directed.

Supply and lay pipe galvanized, "Medium class", including fittings 40mm (1.5") dia

Supply and lay pipe galvanized, "Medium class", including fittings 20mm (3/4") dia

Supply & fixing Gun metal, globe or gate valves, with iron steel wheel head, screwed both ends for iron pipe and fixed, 20mm (3/4") dia pipe

Supply & fixing Gun metal, globe or gate valves, with iron steel wheel head, screwed both ends for iron pipe and fixed, 40mm (1/2") dia pipe

Material & labour for drilling and tapping cast iron water main (in position) for branch connections of the internal dia 20mm

Material & labour construction of brick masonry valve pit of size 0.60x0.60x0.60 mtr (inernal dimension) including earth work and excavation of any type of soil and disposal of surplus soil to a distance not exceeding 50 mtr away from the site incuding plastering internally in cement mortar (1:4) and flush pointing on brick work externally as the work proceeds in the same mortar with angle iron frame 40x40x6mm, hold fast MS sheet cover 3.15mm thick, handle hinged to frame and locking arrangement including black synthetic enameled paint duly painted over a coat of red oxide primer including dismanting of existing pit complete all as specifed and directed.

Material and labour for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

Supply and laying burnt bricks sub class 'B' using old size bricks laid across the cable in trenches as protection to the cable all as specified and directed.

Supplying, laying, jointing and jointing material and testing XLPE /PVC armoured cable insulated and PVC sheathed LT 1100 volt grade (heavy duty)with stranded aluminium conductor of size 35 sqmm 3.5 core laid in trenches/ duct/ through pipes, in floor, on poles complete all as specified.

Supply & laying galvanized steel tubing light grade 50mm bore with all fittings such as tees, bends, elbows, reducer, union nipples etc including all fixing accessories such as couplers, hooks, nuts, saddles pipe hooks laid in trenches/ under floor or fixed wall complete all as specified and directed.

Demolition of mud in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) and cleaning the roof surfaces thoroughly with wirw brushes all as specified.

Wire brushing and cleaning top surfcace of cement concrete including flashing and junction of parapets etc and brushing neat cement slurry with 3 Kg of cement per sqm complete all as specified and directed.

Material & labour PCC Padding with cement concrete type B-0 (1:2:4) 12.50 mm graded aggregate to bring top surface of slab in slope complete all as specified.

Material & labour for 10 mm thick rendering on concrete surfaces finished even and smooth without using extra cemet in cement mortar 1:3 as in roof/sunken floors and using WPC 3% by wt of cement. Note : WPC shall be measured and paid separately under respective item.

M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces

Material & labour for fixing APP based polymeric membrane minimum weighing 3.60 kg/sqm and min 3mm thick reinfirced with polyster noin wove faric (wt not less than 150gms/sqm) land on primed surface by forced application

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles incl removing mortor and cleaning serveciable bricks

Material and labour for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and as directed.

All as per Ser item No 88.00 above but except bricks.

Taking down cement plaster on brick wall upto any height(max of triple storey) including raking out joints, hacking for key, srcubbing down with water complete all as specified and as directed

M&L for complete removal of existing treatment on walls and applying 1mm thick wall care putty and applying two coats of oil bound distemper complete all as specified and as directed.

Demolition of floor hearth or wall tiling including cement mortar bedding (not backing ) removing serviceable tiles to store and rubbish of the premises

Taking up or down existing steel 20 mm tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed

Supply & fixing 20 mm jointing and testing galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed .

Supply & fixing rimless single piece WC with accessories and cistern fittings size 360 x 685 x 795 mm S trap 300 mm, (inlcuding UF Soft close seat cover, tornado flushing, hinges) all as specified and directed.

Supply & fixing angular Stop Cock with wall Flanges all as specified and directed.

Supply & fixing bib Cock with wall Flanges all as specified and directed.

Supply & fixing corner Glass shelf including CP railing and Rawl plugs and screws for fixing complete all as specified and directed.

Supply & fixing brass chromium plated Soap Dish Holder complete all as specified and directed.

Supply & fixing brass chromium plated towel rail fixed with chromium plated brass screws wooden/plastic gutties complete all as specified and directed.

Supply & fixing brass chromium plated towel rack fixed with chromium plated brass screws wooden/plastic gutties complete all as specified and directed.

Supply & fixing brass chromium plated Double coat hook fixed with chromium plated brass screws wooden/plastic gutties complete all as specified and directed.

Supply & fixing in replacement Braided connection pipe 15mm dia and 45cm long with two Nos of brass check nuts and washers complete all as specified and directed.

Supply & fixing Single lever Tall Boy with 155mm extension body fixed spout without popup waste system Basin mixer with 600 mm Long Braided Hoses all as specified and directed.

Supply & fixing Single lever wall mixer including internal brass kit and exposed kit both complete all as specified and directed.

Supply & fixing Maze Over head shower 150 x 150 mm Square shape single flow (Body and Face plate stainless steel extension arm and ABS Body in Chrome Finish) with rubit cleaning system all as specified and directed.

Supply & fixing Single lever Concealed Deusch mixer (Divertor) with provision for connection to over head shower only including internal concealed brass kit. all as specified and directed.

Supply & fixing brass chromium plated health faucet for pedestal pattern water closet including PVC flexible pipe along with complete necessary fittings complete all as specified and as directed.

Supply & fixing in replacement 32mm dia PVC waste pipe for WHB complete all as specified and as directed.

Supply & fixing in repair chromium plated grating 125 x 125 mm Round, fixing with cement mortar 1:3 on Nahani or floor trap complete all as specified and directed.

Supply & fixing Vitreous china Table top wash hand basin (Size: 500 x 365x 120mm) including chromium plated brass waste coupling and waste pipe all as specifed and directed.

Supply & fixing Brass CP Tumbler holder all as specified and directed.

Supply & fixing urinal spreader of Brass CP for fixing with 15 mm dia pipe. (Minimum weight 60gms complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

Supply & fixing in replacement PVC (SWR) vent cowl for 110mm bore pipes complete all as specified.

Supply & fixing in repair PVC (SWR) pipes single socketed in any length with rubber joints fixed to wallor laid in trenches 75 mm bore.

Taking down Chowkat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Taking down Chowkat or frames n exceeding 1.5 Sqm each complete all as specified and as directed.

Supply & fixing galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete fixed with tinned tacks or galvanised wire staples all as specified and as directed

Supply & fixing 4 mm thick of size 600x600mm HPSC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed GI powder coated grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19x0.9 mm duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size including taking down the old ceiling complete all as specified and as directed.

Supply & fixing Glass shelf of length 600mm, width 100 mm and thickness not less than 5mm including CP railing and rawl plugs and screws for fixing complete all as specified and directed.

Surface excavation not exceeding 30cm deep and averaging 15cm deep in soft/loose soil and getting out, complete all as specified and directed.

Material & Labour for hard core of broken stone or boulders of gauge n. exceeding 63 mm deposited, spread and leveled in layers not exceeding 15cm thick, in layers watered and well rammed to surface complete all as specified and as directed.

Material and labour for cement concrete type D-2, 1:4:8 (40mm graded aggregate) 100mm thick as in sub base of flooring complete all as specified and directed.

Material & labour precast PCC blocks (1:2:4) type B-1 of size set in cement mortar 1:6 on both sides of roads including necessary excavation embedding blocks in the ground to required depth, tamping around and removing surplus spoil and deposited to a distance not exceeding 50m complete all as specified and directed.

Material & labour for providing and marking lines, dashes, arrows, letters etc. on road pavement and the like not exc 10 cm wide with road marking paint complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and directed.

Cutting holes in brick walls built in cement mortar for inserting hold fasts, the embedded portion of hold fast exc half brick and not exc one brick and making good in cement 1:3 or PCC 1:2:4 type B-1 using 12.5mm stone aggregate, complete all as specified and directed.

Supply & fixing rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates, confirming to grade Fe-410-W complete all as specified and directed.

Supply & fixing pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Material & labour for preparation of new steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply, fixing, connecting and testing energy efficient (five star rated) electric water heaters vertical storage type of capacity 25 ltrs with powder coated body, inner tank and inner assemble made of ultra thick superior cold rolled steel having high density puf insulations with ISI accessories such as thermostat switch having adjustable knob for temperature setting, heating element, pressure safety valve, indicators, 15mm bore, 450mm long PVC connections ISI marked for inlet & outlet including fixing to wall with suitable size MS bolts, nuts complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) fitting and fixtures such as switches, socket, call bell lamp holder, regulator, sketch fittings etc and, making good disturbed surface of wall, ceiling floor etc complete all as specified and directed.

Taking down old unserviceable sub main wiring of any type and size and making good of disturbed surface of walls/ceilings, complete all as specified and directed.

Taking down main switch/DB complete all as specified and directed.

Material & labour for concealed point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistranded cable as earth wire including pressed steel sunken boxes for mounting of switch/sockets and regulator and including modular type cover plate white colour all as specified and directed for: (a) One light / fan / call bell point controlled by one, one way switch.

All as per Ser item No 137.00 above but for 5 Amps socket on independent board

All as per Ser item No 137.00 above but for 5 Amps socket on the same board

All as per Ser item No. 137.00 above but with 2.5 sqmm multistranded copper conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board

Supply & fixing switch piano 5 Amps, SP, flush button type, one way, 230 Volts, AC

Supply & fixing switch MODULAR 5 Amps, SP, flush button type, one way, 230 Volts, AC

Supply & fixing switch MODULAR 16 Amps, SP, flush button type, one way, 230 Volts, AC

Supply & fixing socket out let multipurpose 5 pin 5 Amps, flush type, 230 Volts complete

Supply & fixing socket out let multipurpose MODULAR 5 pin 6 Amps, flush type, 230/250 Volts complete

Supply & fixing socket out let multipurpose MODULAR 5 pin 6/16 Amps, flush type, 230/250 Volts complete

Supply & fixing switch piano 15 Amps, SP, flush button type, one way, 230 Volts, AC complete

Supply & fixing socket out let multipurpose 6 pin 5/15 Amps, flush type, 230 Volts complete

Supply & fixing in LED tube light fitting 20W (double side) including LED lamp 20W with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (white light) fixtures box type and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.50mm 3 core complete all as specified and directed.

Supply & fixing in repair LED street light fitting 30W including LED lamp pressure die cast aluminum IP66 with surge protection device of 10KV, IK7 LED (SEOUL) 6500K and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.50mm 3 core including GI pipe 32mm light grade 0.9 mtr long bent to L shape in 02 Nos of GI clamps of size 25x6mm of length 25mm with nuts, bolts and washers complete all as specified and directed.

Supply & fixing in repair exhaust fan metallic body, 300mm sweep, 900 RPM, single phase, 230 volt, heavy duty with louvered shutter including provision of three core flexible cable of required length of size 23/0.0076 from ceiling rose/connector to fan terminal, fixing the fan on wall with suitable size of nut, bolt & washer, all as specified and directed.

Supply & fixing ceiling rose surface bakelite 65 x 50 mm with three terminals complete all as specified.

Supply, installation & commissioning MCB load distribution board TPN 4 way double door, for mounting DP/SP/TP/MCBs/MCCBs as incoming/outgoing, factory made, conforming to IS, fabricated out of CRCA sheet, fitted with DIN channel, neutral link and suitable rates bus bar. DBs shall be semi glossy finished with epoxy polyester based powder paint sprayed and backed at high temperature, between powder paint process the sheet steel having to go through the anti rust conditioning in not less than seven tank process to ensure smooth finish and protection against corrosion atmosphere. The DBs shall be double door type with hinged door with locking arrangement. The DP/SP/TP MCB shall be of same make as DB. DB shall also be provided with label marking indicating the incoming and outgoing circuits on all way as specified. The DBs shall be of IP 43 - IK 09 with metal door complete all as specified and directed.

Supply& fixing MCB TPN 63 Amp, 4 pole, 16KA 415 Volts complete

Supply& fixing MCB SP 6-32 Amp, 240 Volts complete

Material & labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the earth plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe light grade', watering pipe 20 mm dia GI 'light grade', GI wire mesh funnel, alternate layer of char coal and salt on all side to earth plate as specified, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation and earth work, testing the earthing after complete all as specified and directed.

Supply and fixing MODULAR fan regulator step type 120W, 02 module complete

Material & labour Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings incl 01x 9 Watt LED bulb complete all as specified and directed.

Material & labour in replacement for sub main wiring with two single core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor, FRLS type cable drawn through and including PVC concealed conduit of not less than 25mm in size complete with all accessories alongwith provn of 6 sqmm PVC insulated and unsheathed ,multi stranded copper conductor, FRLS type cable as earth wire. (Three runs of cable and one run of conduit shall be measured as one length)

Supply & fixing in repairs DB, SPN 8 way double door for MCB, 240 volts with 100 Amps rated bus bar

Supply & fixing LED Decorative mirror light 10Watt complete all as specified and directed.

Supply and fixing recess/ceiling mounting LED light 1x36 Watt cool white/warm light complete all as specified and directed.

Supply and fixing LED Decorative wall light fancy type complete with fitting & fixtures of cap 10 Watt all as specified and directed.

Supply and fixing LED Gate Light 1x10 Watt with base suitable for GI Pipe 40mm complete all as specified and directed.

Supply and fixing in replacement ceiling fan complete with blade, down rod and accessories, 230 V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing PVC Conduit pipe Heavy Grade of size 32 mm with all accessories like (Bend/Tee/Junction box) complete all as specified and directed.

Supply and fixing Aluminium service conductor flat or circular of size 10 Sqmm 2 Core, including conduit pipe laid in ground for connection of Gate/Garden light complete all as specified and directed.

Ms Sanjiv Kumar

M/S Kuldip Construction Co.