Repairs to Scan Make Lift installed at IPD block of Govt SMHS Hospital Srinagar

Amount

Providing and fitting of Dry type batteries 12V, 7AH capacity by way of replacing the old one.The job further includes testing of the same for its proper functioning.old part to be retained by contractor and the rates quoted must be less by its value.

Dismounting of the damaged Landing operating panel along with all allied accessories by way of removing screws and all allied electrical connections. The job further includes providing and fitting of new Landing operating panel. The operating panel should comprise of seven segment display along with call push button. The job further includes testing of the same for its proper functioning.

Providing and fitting of trailing cable of 12 core in place of damaged one.

Providing and Fitting of 13 mm dia rope of metal steel having length of 80 mtr by way of dismantling the motor and sheave assembly from the main housing. The Job includes dismantling the sheave assembly from the main housing of the motor and fitting the wire on the grooves. The Job further includes lubrication cleaning where ever required. All tools and tackles required for the job are included.

Providing and Filling of Synthetic Gear oil including top up. The Job ncludes draining the old oil and filling with the new one. All tools and tackles required for the Job are included in the Work

Providing and laying integral cement based water proofing treatment of lift pit after draining of lodged/stagnant water including preparation of surfaces consisting of following operations. a) Applying a slurry coat of neat cement using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 (Preferrrably URP type) and approved by Engineer-in-charge over the RCC slab including adjoining, b)After two days of proper curing applying a second coat of cement slurry using 2.75kg/sqm of cement admixed with water proofing compound conforming to IS 2645 (Preferrrably URP type) and approved by Engineer-in-charge c) finishing the surface with 20mm thick joint less cement mortar of mix 1:4(1 cement: 4 coarse sand) admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally surface with trowel with neat cement slurry

Providing and Fitting of Car Door Header Spring in place of the old damaged one

Prudent Engineers