Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.8 LAccepted-AOC PART III GANESH MURTHI NAGAR CAPT PRAKASH PETHE MARG CUFF PARADE ROAD COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC L1 | |
| 2 | L2₹23.7 L+₹44,360 (1.91%)Rejected-Finance | L2 | Rejected-Finance Being Other Than Lowest | |
| 3 | L3₹25.6 L+₹2.3 L (9.96%)Rejected-Finance NOT AVAILABLE | FARIDABAD | HARYANA | 121004 | L3 | Rejected-Finance Being Other Than Lowest | |
| 4 | L4₹30.1 L+₹6.8 L (29.3%)Rejected-Finance | L4 | Rejected-Finance Being Other Than Lowest | |
| 5 | L5₹30.7 L+₹7.4 L (31.9%)Rejected-Finance FLAT NO A 102 ASHOKVAN RAJSHIV CO OP HSG SOC SHIV VALLABH ROAD DAHISAR EAST MUMBAI 400 068 | MUMBAI SUBURBAN | MAHARASHTRA | 400068 | L5 | Rejected-Finance Being Other Than Lowest |
Tender Value
Refer Docs
EMD Value
₹96,000
Closing Date
31 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
REPAIR MAINT OF CERTAIN B R DAY TO DAY MAINTENANCE WORK UNDER AGE B R I AT OLD NAVY NAGAR UNDER GE NW NAVY NAGAR COLABA MUMBAI
2022_MES_569082_1
8106/CWE (NW) Mumbai/ E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) Navy Nagar
Class D
7 documents required · 7 mandatory
₹500
Yes
GE (NW) Navy Nagar
₹96,000
Yes
7 Feb 2023
14 Dec 2022
2 Jan 2023
14 Dec 2022
31 Dec 2022
24 Dec 2022
14 Dec 2022 - 22 Dec 2022
Amount
Supply and Fixing in repairs cupboard/drawer pulls, 3 screw plate with fixed dished pull, 80 mm to 100mm long handle brass type complete all as specified and directed by Engineer-in-Charge.
Material and Labour in repair aluminium powder coated drapery rod of 20 mm dia including curtain rings (minimum 6 Nos for each curtain rod) complete all as specified and directed by Engineer-in-Charge
Supply and Fixing aluminium powder coated fancy type domes cum bracket (20 mm dia) fixed to both ends of the drapery rod and wall complete all as specified and directed by Engineer-in-Charge
Supply and fixing in repair of 04 pieces pulley operated Cloths Drying system casting of Aluminium pipe of outer dia 22 mm inner dia 19.8 mm and channel pair of length 2.00 mtr with pulley made up of devil mounted and fixed with self tapping screw. Rope will be HDPE double core of 4 mm with rope Guide at locking system to hide rope. Channel to be dia of minimum weight of pipe shall not be less than 0.20 kg/Rm and maximum weight of Pipe in one unit not less than 2 kg. Weight of rope shall be not less than the 550 gms / mtrs including taking down old unserviceable cloth hanger complete all as specified and directed by Engineer-in-Charge Make : As per sample approved by GE
Taking down and refixing PVC profile suitable for 275 ltrs loft tank including fixing of aluminium channel around the profile complete all as specified and directed by Engineer-in-Charge
Demolition of cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge
Material and Labour Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 40 mm thick in flooring, complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs Cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed by Engineer-in-Charge
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge
Supply and Fixing Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding layer in CM 1:4 complete all as specified and directed by Engineer-in-Charge
Supply and Fixing Glazed colour ceramic tiles in vertical surfaces 300 x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering as backing layer in CM 1:4 complete all as specified and directed by Engineer-in-Charge
Material & labour for non skid coloured jointed free ceramic tiles of size 600mmx600mmx10mm thick in floors over and including 20mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge
Dismentling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed by Engineer-in-Charge
Material and labour for Granite(of any type) 18-20mm thick slab laid on floor machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone over 15 mm thick screed bed in cement mortar (1:6) including grinding & polishing complete all as specified and directed by Engineer-in-Charge
All as per item No 14 above but on wall skirting /dado over 15 mm thick Cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge
Rounding to edges of stone slabs (kota/granite etc) one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engineer-in-Charge
Extra for forming grooves over granite or kota stone slab as in staircase complete all as specified and directed by Engineer-in-Charge
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge
Material and Labour pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick walling and inserting the sheets into these grooves including working platform/scaffolding) complete all as specified and directed by Engineer-in-Charge
Material and Labour pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick walling and inserting the sheets into these grooves including working platform/scaffolding) Complete all as specified and as directed by Engr-in-Charge
Taking down cement plaster of any discription including racking out joints hacking for key scrubbing down with water & removed debrises out MD land complete all as specified and directed by Engineer-in-Charge
Material and Labour Plastering on concrete surfaces of ceiling, beams, lintels, walls etc, 20mm thick (10+10mm)in two coats in CM (1:4) , mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified and directed by Engineer-in-Charge (WPC to be mixed in setting coat only and shall be measured and paid separately)
Material and Labour rendering 15mm thick in CM (1:6) on wall finished even and fair without using extra cement as in patches all as specified and directed by Engr -in- Charge.
All as per item No 23.00 above but 10mm thick in CM (1:3) in ceiling complete all as specified and directed by Engineer-in-Charge
Material and Labour applying one coat of Rust remover and rust passivator on exposed reinforcement surfaces at any height complete all as specified and directed by Engineer-in-Charge
Material and Labour preparation of new undecorated surfaces of walls,soffit, fascias of chajjas etc and applying two coats of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions complete all as specified and directed by Engineer-in-Charge
Material and Labour for preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge
Material and Labour applying two coats of white wash on new plastered surfaces including preparation of surfaces as in ceiling complete all as specified and directed by Engineer-in-Charge
Material and Labour applying one coats of white wash on old plastred surfaces including preparation of surfaces as in wall complete all as specified and directed by Engineer-in-Charge
All as per item No 29.00 above but on ceiling complete all as specified and directed by Engineer-in-Charge
Material and Labour applying one coat of oil emulsion distemper white or tinted on wall after necessary preparation of surface including removal of swelled popup paint, cracks and applying wall care putty to make the surface even complete all as specified and directed by Engineer-in-Charge
Material and Labour applying two coats of oil emulsion distemper white or tinted on wall after necessary preparation of surface including removal of swelled popup paint, cracks and applying wall care putty to make the surface even complete all as specified and directed by Engineer-in-Charge
Material and Labour preparation of old undecorated surfaces of walls,soffit fascias of chajjas etc and applying one coats of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions complete all as specified and directed by Engineer-in-Charge
Material and Labour applying one coats of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth complete all as specified and directed by Engineer-in-Charge
Material and Labour preparation of old painted surfaces over 10cm width or girth and applying one coats of synthetic enamel paint on steel surfaces complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden/aluminium frames complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair 5.5 mm thick frosted glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame including hacking out broken glass panes of any description from wooden frames or aluminium fixed with beads complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair 100mm stainless steel Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.
Supply and Fixing in repair 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair 140mm long Floor door stopper of brass body and tongue with hard drawn steel spring , fixed in floor complete all as specified and directed by Engineer-in-Charge
Resecuring or easing & adjusting of shutters, without taking down but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed by Engineer-in-Charge
Resecuring or easing & adjusting shutters , without taking down upto 1 sq. m each complete all as specified and directed by Engineer-in-Charge
Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed by Engineer-in-Charge
Supply and Fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in-Charge
Supply and Fixing Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in-Charge
Taking down shutters of any description exceeding 1 Sq. M and not exc 2Sq.M each at any storey of building complete all as specified and directed by Engineer-in-Charge
Supply and Fixing, 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge
Suppling and fixing 2nd class hardwood 35mm thick glazed and skelton shutters, open rebated and prepared to receive wire mesh edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing mesh etc, sizes of members of shutters as specified in SSR complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 2nd class hard wood 35mm thick factory made plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial or 12mm veneered particle board with commercial veneer on both faces the size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressured treated upto 9 storey complete all as specified and directed by Engineer-in-Charge
Material and Labour for Cub-boards shutters and shelf made with 19mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame-work including 6mm teakwood lipping complete all as specified and directed by Engineer-in-Charge (work shall be carried out upto 12 storey of bldg)
Supply and fixing 2nd class hardwood bullnosed splayed, chemfered or rounded on edge fillets rectangular in section, sectional area exc 6 but n. exc 13 Sqcm fixed in repairs fixed with nails complete all as specified and directed by Engg-In- Charge
All as per item No 53 above but sectional area exc 13 sq cm and not exc 25 sq cm complete all as specified and directed by Engg-In- Charge .
Supply and Fixing Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30 mm at any storey of building complete all as specified and directed by Engineer-in-Charge
Supply and Fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden/aluminium frames complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 100mm stainless steel Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge
All as per item No 58.00 above but 125mm complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge
All as per item No 60.00 above but 100mm complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge
Supply and Fixing 140mm long Floor door stopper of brass body and tongue with hard drawn steel spring , fixed in floor complete all as specified and directed by Engineer-in-Charge
Material and Labour preparing new wood or wooden surfaces over 10 cm of width or girth and applying two coats of synthetic enamel paint over a coat of pink primer upto 9 storeycomplete all as specified and directed by Engineer-in-Charge
Supply and Fixing in repair Aluminium anodised section 15 micron for window (Sliding type) / ventilator (Partly fixed party louverd type) etc of anodised aluminium section ventilators partly fixed partly louvered type comprising frame, shutters, locking arrangements including necessary jamming, glazing pins, neoprene beading, glazing pin screw, levered aluminium sections for louvered glass, rollers , handle etc including taking down u/s one, complete all as specified and directed by Engineer-in-Charge Note : (a) Glazing shall be measured separately. (b) Item shall be paid as per weight of aluminium section. (c) Rate quoted shall be inclusive of neoprene beading, glazing clips, screw etc as required which not be measured for arriving the weight. (d) Rate shall be inclusive of the aluminium handle, locking arrangement including complete packing with silicon gel around contecting surface of aluminium and including matching the existing surface area complete all as specified. (e) Aluminium window / ventilator etc to be fixed with cadmium plated screw not more than 300mm c/c .
Supply and Fixing 5.5 mm thick frosted glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame complete all as specified and directed by Engineer-in-Charge
Supply and fixing in repair/ replacement of 15mm bore internal steel water tubing, galvanised, Medium grade with all fittings such as nipple, union, socket, elbow, bends, fixed to wall including work to be done up to 15 th floor in high rise buildings in short piece/length, including breaking the existing brick wall for replacement of corroded GI pipe in/ on wall and making good the disturbed surfaces to match previous structure with complete all as specified and directed by Engineer-in-charge
All as per item No 67.00 above but 20mm bore complete all as specified and directed by Engineer-in-Charge
Demolition of concrete of any description and in any position not otherwise specifically provided for including chaina mozaic, WC etc. removing the debris from MD complete upto 4 storey complete all as specified and directed by Engineer-in-Charge
Material and Labour for roughening the surfaces of old cement concrete floor by picking, cleaning and washing down with water to remove dust etc. rendering 15 mm thick in CM 1:3 mixed with water proofing compound and applying two coats of hot bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical sides of sunken floors. (Note : WPC shall be measured and paid seperately) complete all as specified and directed by Engineer-in-Charge
Material and Labour cement concrete 1:7:12 with with 40mm graded stone coarse aggregate in sunken floor complete all as specified and directed by Engineer-in-Charge
Grubbing up and uprootinng of trees / plants from external walls of bldgs pouring muratic acid for burning risidual roots in any. Racking out the dead roots from plants / concrete joints upto its penetrated portion and filling with PCC (1:2:4) 12.5 mm graded aggregate and finishing the surface with 15mm rendering in CM (1:4) including necessary hanging arrangement complete all as specified and directed by Engineer-in-Charge
Material and Labour for Writing letters of figures (Block, Roman, Italic or Indian) exc 60 cm but not exc 90 cm high using two coats of Acrylic paint exterior grade (100%) acrylic over a coat of primer including preparation of surfaces of walls etc specified on external surfaces. (letter writing shall be done at isolated locations at height not more than 10 m above Ground level) complete all as specified and directed by Engineer-in-Charge
Material and Labour for one coat of floor paint (Indigo or Equivalent) on old surfaces of chequered tiles/paver blocks in floor including brooming and cleaning the surfaces with watercomplete all as specified and directed by Engineer-in-Charge
SRI SAIRAM COUNSTRUCTION
ASHOK CONSTRUCTION
NATH CONSTRUCTION
BOB ENTERPRISES
Genius Construction Co.
SRI RAM CONSTRUCTION
Shivam Enterprises
Shetty Construction Co
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .