External Electrification work for 24 And 96 Qtrs. DRP Line, Jabalpur

Amount

H Beam 152x152 or 150x150 or 175X85 MM Supplying and erection of HT/LT over head line single length supports complete with aligning and keeping it in truly vertical position, including digging pit of required size in all type of soil/rocks filling with 1:3:6 cement concrete of 0.60 mtr. dia. around the pole up to ground level including muffing of 0.45 mtr. dia. from ground level to 0.45 mtr. high as per specifications with 20 cm. thick base foundation in 1:4:8 cement concrete as required refilling the pit with boulder and soil as required, including painting of pole with bitumen paint below GL and two coats of red oxide and two coats of aluminium paint or synthetic enamel paint above GL as directed complete as per specifications. The depth of burying of pole shall be 1/6th of the length of pole.

(i) H Beam 11 Mtr Long 152x152 or 150x150 mm 37.1 Kg/Mtr. Weight

(ii) R.S. Joist 9.3 Metre 175X85MM 19.6 KG/Mtr

Supplying and erection of steel tubular pole swaged type as per IS:2713 1980 Complete with baseplate and top Canopy (with G.I. pipe bracket as required), supports complete with digging and keeping it in truly vertical position i/c digging pit of required size filling with 1:3:6 cement concrete of 0.60 meter dia. of required length around the pole i/c muffing of 0.45meter from ground level as per specification with 20cm.thick base foundation providing and busying 15mm.dia.G.I.pipe from bottom to 1.5meter above ground level on pole, refilling the pit i/c. painting of pole with bitumen paint in bottom and one coat of red oxide and two coat of aluminum paints etc. complete as per specification. The depth of foundation shall be1/6th of the length of pole.

(A) 410 SP-29 - 9 meter length and 125 Kg Weight of Size 5000x139.7x4.85mm, 2000x114.3x4.5 mm 2000x88.9x3.25mm with base plate.

STAY SET Supplying and erection of GI/MS stay set complete with stay rod, anchor plate of size 300x300x5mm, thimble, stay clamp, turn buckle, bow tightener etc. with stay wire, strain insulator, nut bolts as per specifications including excavation in all type of soil/ rocks and foundation in cement concrete 1:3:6 of required size and other necessary materials complete as required as per specifications

(i) GI Stay Rod 20mm dia (Painted) 1.8 m long with 7/4.00 mm (7/8 SWG) stay wire for HT line

(ii) GI Stay Rod 16mm dia (Painted) 1.8 m long with 7/3.15mm stay wire for LT line.

33KV/11 KV DISC POLYMER L.ROAD TYPE T& C INSULATOR Supplying and fixing polymer type 11KV/33KV HT Disc (strain) insulator of approved make on existing pole or bracket with GI hardware and other necessary materials complete as required.

(i) 11 KV (45KN) Disc Polymer L.Rod type T&C Insulator with 11 KV Composite Polymer Strain set with hard ware suitable for panther conductor w L.ROD type T&C Insulator complete

POLYMER PIN INSULATOR Supplying and fixing polymer type 11KV / 33KV pin insulator with GI pin, of approved make on existing pole or bracket with other necessary materials complete as required.

(i) 11 KV 5 KN PIN Composite Polymer Insulator

Supplying and drawing ACSR/AAAC conductor of approved make with stringing, making off complete with binding at existing insulator, jointing , jumpering, billing off connecting, making 'D' loops connections etc. complete and clearing of obstacles (if any) as specified and directed.

AAAC DOG Conductor 0.10 sq. inch (100sq. mm. Al.Eq)

AAAC Conductor (0.05 sq. inch )55 sqmm Al. or Equivalent (Rabbit)

EARTHING COIL OF 115 TURNS OF 50 MM DIA.2.5 MTR.LEAD OF 4.0 MM G.I.WIRE Providing and fixing earthing arrangement for HT/LT poles with 8SWG GI lead of 115 turns of 50 mm dia. connection with pole / cross arm / control junction box on pole with 4 mm dia. GI lead through 20 mm dia A class GI protection pipe of 2.5 m length duly bend, packing of charcoal powder and salt as per specifications including excavation of pit in all type of soil / rock, refilling of pit by black cotton soil etc. complete.

ANTI CLIMBING DEVICE BARBED WIRE Supplying and fixing 2 ply 12 gauge barbed wire around the existing HT/LT electric pole for safety measures as per IE rules including all stapples and all other necessary materials complete as required as per specifications

DANGER BOARD ENAMELED Providing and fixing enamelled danger caution plate/board on existing electric poles or wherever required of size 250x200 mm, made of 1.6mm thick mild steel sheet and vitreous enamelled white, with latest, figures and the conventional skull and cross-bones in signal red colour (as per IS-5-1978 with latest amendment) on the front side. The rear side of the plate shall also be enamelled. The corner of the plate shall be rounded off with required material such as screws, wires clamps, nut bolts etc. complete. (i) 11 KV

GUARD WIRE Supplying and drawing G.I. guard wire / bearer wire / earth wire including stringing, binding at existing insulators or brackets, jointing, jumpering, connecting etc. as required and clearing of obstacles (if any). 6 SWG (4.87 mm dia)

Supplying and erection of guards for existing overhead lines as required as per specification: 42.11.1 Cradle type

Providing and fixing including Testing of LED fixture on street light pole, the fixture should be IP- 65, PF be 0.95 with 85% Power effecency at least of life span of (approxy)working 50,000 Hrs Housing be of Al. Dye cost including connection etc cable reqd. GI pipe braket nute & bolts etc. (Make Bajaj, Crompton, Havells, Syska, Energygreen,Surya, Philips, ) (A)90 watt

Providing and fixing chain link fencing sourriding existing DTR S/S finical (total 37 running meter maximum) of 6 feet height with chain ling fencing on MS Angle (50X50X6) mm support 7 nos. 7 feet height including digging of pit in all type of soil / rock as required. The depth of burying of angle post shall be 0.5 mtr. and filling with 1:3:6 cement concrete of 30 cm. dia. around the post as required. & Supplying, stacking and spreading of nominal size metal 40 mm with following feature.

(A) Upper & lower frame of fencing will be of MS angle (25X25X4) mm size.

(B) MS strip of (25X5) mm flat shall be used fro cross bracing of fencing

(C) Double Gate (2 Nos. 2.5’X5’) of MS angle (50X50X6)mm. bracing of 25X5 mm flat with mesh & locking arrangement. (Complete as above AtoC) – one job.

Supplying and fixing of Angle/ channel/flat iron, V cross Arms reinforcement of RSJ jolt/ flat iron fittings for overhead lines and poles such as cross arms/ bracket/ clamps/ stiffness for poles etc. all required steel work including' cutting to size making proper shapes drilling scan welding etc. including nuts & bolts plan & spring wisher and other necessary material including one coat of red oxide and two coat of aluminum paint etc. as required.

Supplying installing, connecting, testing and commissioning of 3 Phase, 50 Hz, 11/0.433 KV or 33/0.433 KV, Delta/Star connected, Aluminium/Copper wound, oil filled, Indoor/outdoor type, Distribution/Station transformer of accepted standard specification, 5 star catagory class, with accessories such as drain & filter valve, earthing terminals, lifting arrangements of suitable size, dehydrating breather with silica gel of suitable size, Conservator tank, air release devise, Rating & diagram plate including CI rollers, Radiators with shut off valve, Cable end boxes on HT & LT side bushings, Explosion vent with diaphragm, Off load tap changing switch, Buchholz relay, thermometer pocket with 6” dial type thermometer & OTI, wherever required complete with first filling of oil with installation on existing DP structure or foundation etc. complete as per specification. The no load and full load losses should not be more than as mentioned below. BIS CERTIFIED, EE LEVEL-III

DTR 11/0.4 KV BIS Certified LEVEL-III 200 KVA 11/.433 KV (Alluminium/Copper wound with tap changing arrangement) NLL 0.51 KW & FLL 3.0 KW

Providing and fixing outdoor type pole mounting weather, dust and vermin proof L.T. distribution box made of 14/16 gauge, M.S. sheet with clamping arrangements, lockable hinged door duly painted on all sides with red oxide antirust and corrosion treatment two coats of synthetic enamel paints of approved make and shade, consisting of following fittings. L.T. Distribution box suitable for 63/100/200/315 KVA.transformer (without TPN switches) with required Amp MCCB/Isolator on incoming side and PF HRC units on outgoing side. Or

For 200 KVA Transformer

a) 315 Amps 35 KA breaking capacity TP MCCB with neutral link for incoming - 1No.

b) 4 strip aluminium bus bar 400Amps supported on epoxy insulators - 1 Set

c) 160/200 Amps, 415Volts DMC cutout with base for outgoing feeder with 160/200 amp HRC - 9 Nos.

d) GI earth terminals- 2 Nos.

e) 6 Lever Godrej Padlock with 3 keys - 1 No

f) Light point with switch and lamp holder with lamp - 1 No.

Distribution box complete as above (a to F) as per MPKVVCL norms & specifications complete.

RATE as per MPEB SOR

Commissioning of D P structure over existing support with panting in an approved manner consisting of following :-

(A) D. C. cross arm with clamp, nuts & bolts (100 x 50 mm only ) - 1 set

(B) 11 KV D. O. fuse unit, lightings arrangement and AB swich mounting channel with nuts and bolts (75 x 40 mm channel) of require - 1 set

(C) 11 KV Polymer AB swich as required ( set of 3 Nos.) - 1 set-

(D) Transformer mounting cross arms / channels with clamps nuts and bolts (100 x 50 mm channel ) - 1 set

(E) 11KV Polymer Do fuse unit ( set of 3 no.) - 1 set

(F) Transformer clamping set (50x50x6 mm angle ) with nuts and bolts etc. complete -1 set

(G) Transformer belting set (50x50x6 mm angle) with nuts and bolts etc. complete -1 set

(H) 11 kv polymer lightning arrestor ( 9 kv gapless type ( 5 kA ) for DTR ) ( set of 3 No.) - 1 set

(I) supplying , fixing, testing and connecting of complete earling set of 7 No. as per MPMKVVC.Ltd. circular No DS CO M/EZ/ WS/1516/DT 17-03-2008 and approved dwring for transformer sub - station including all materials GI Strips, GI wires, Charcoal power salt excavation of pits in all types of soils/rocks etc. as required complete .( 1 set of 7 Nos.) -1 set

(J) Distribution panel mounting channel and clamp with nuts & bolts etc. (75 x 40 mm channel ) 1 – set

(K) Supplying , fixing, testing and Commissioning of DTR Meter LT. 3 phase 4 wire 3X240 volts I 3 A. LTCT operated 3 phase 4 wire 3x63, 5 volts , LB = 5 amps lmax 10 amp trivector meter glass of accuracy 0.5s DLMS complaint category a meter along with GSM ( GPRS compactable ) modems with box i/c all accessories and formalities as per MPMKVVCL as required. or 3P 4w - 5A LTCT class 5s DLMS compliant type c. rs - 232. Port box MRI LTCT 100/5A i/c meter box with TTB etc as requiredas per MP SEB latest Specification.

(L) SF & T and HT tape for covering LT bushing i/c windings and blower hitting complete minimum 30 meter or as required.

D.P. Structure Complete as above (A to L)

Supplying ,laying ,testing, and commissioning of P V C insulated PVC heavy duty power cable confirming to lS 1554­1964,1100 volt grade cable Of approved make in trench ,G I pipe Air (laying on pole) trench, i/c cost of excavation in any type of soil/rock etc. including connection through lugs by cramping method glands etc as required as per specification.

(i) Supplying laying testing and commissioning.UnArmoured single core XLPE insulated aluminum conductor cable.

(a) 150 sq mm.

(b) 300 sq mm.

(c) AB cable (3X95+1X16+1X35)sqmm 1100 Volts. with insulated messenger wire.

(B) UNARMOURED 2 Core

(C) Armoured 4 core XLPE insulated aluminum conductor cable.

(D) Armoured 2 core XLPE insulated aluminum conductor cable.

Supplying fixing testing and commissioning of metallic Street Light Box of required size With MCB,Bus Bar & connecter etc as required.

Suppying & installing G.I. Pipe for protection of underground cable fixed on wall/support/in trench/fixed between two rigid existing support of wall/beam for erection of ceiling Fan/down rod for stiff pendent for light luminaries /fan/protective for earthing, lightening conductor down strip/overhead service line/for submersible cable or centrifugal pump for water supply with necessary iron clamp coupler, bend, tee, elbow, nuts and bolts etc.complete in an approved manner as required to complete excluding cost of excavation/dismentalling & other finshed masonary Item complete.

For 'B' Class pipe ISI Marked (IS-1161-68)

S/F and testing Junction box spring Loaded complete as per MPEB Specification .

Spring loaded busbar system suitable for 1-incoming 6 outgoing 1 phase circuit

Spring loaded busbar system suitable for 1-incoming 3 outgoing 3 phase circuit

ARCHNA ELECTRICALS