Supply installation and commissioning of machniery equipment

Electrical and Electronic & Communication Engg.

Digital PH Meter: Should have Working range from 0 to 14. Should have resolution 0.1/0.01 pH. Should have Temperature compensation zero to 100 degree C with ATC, Should have RS.232C output and supply Data connector cable. Should have Automatic calibration facility. Should have data storage facility and record maximum and minimum value. Should have 3 stage calibrations. Should have digital display with 0.001 pH unit readability. Should supply Tri-combination pH/ATC electrode. Should supply Electrode + Standard buffer solution (pH) 4.0, 7.0, 10.01 x 50ml for each bottle) + standard electrode holder +Ac /DC Adaptor. Should be provided with an electrode holder/arm with smooth movement

Do Meter: DO: 0 to 200.0% / 0 to 20.00ppm (mg/L), Temperature Range: 32° to 122°F (0° to 50°C), Max. Resolution: 0.1%, 0.01ppm (mg/L), 0.1°F/ °C, Accuracy: +2.0%FS, 0.4ppm (mg/L), +1.8°F/1°C, Power: four SR44W button batteries, Size: 1.4x6.9x1.6 inch (36x176x41mm), Weight: 3.8oz (110g)

Nephelomete: Display 3½ Digital LED. Detector Photocell Photodiode. Range 0-20 AND 0-200 NTU.Resolution 0.01 NTU. Accuracy ±2% FS ± 1digit.Sample Systems 30 mm Clear Glass Test. Light Source 6V Tungsten Lamp.Power 230V±10%, 50Hz AC.

Jar Test Apparatus: RPM: Variable from 5 to 150 rpm's with accuracy of +/- 1 rpm, Timer: 100 Hrs, Display: 16 x 2 LCD, Jar: for 1000 ml x 6 nos, Paddles: stirring paddles made of s. S. - 6 nos, Illumination: fluorescent white light, Dimension: 930mm(l) x 250mm(b) x 480mm(h)

Conductivity Meter Apparatus: Conductivity Range: 0 to 199.9uS, 200 to 1999uS, 2.00 to 19.99m, TDS/Salinity Range: 0 to 99.9ppm (mg/L), 100 to 999ppm (mg/L, 1.00 to 9.99ppt (g/L), pH Range: 0.00 to 14.00pH, Temperature Range: 32° to 149°F (0° to 65°C), Max. Resolution: 0.1uS, 0.1ppm (mg/L), 0.01pH, 0.1°F/ °C, Accuracy: +2%FS, +0.01pH, +1.8°F/1°C, Power: four SR44W button batteries, Size: 1.4x7.3x1.6" (36x186x41mm), Weight: 3.8oz (110g)

Bitumen Penetrometer: Confirming to IS: 1448 (Part 60), Consisting of Steel Base, adjustable feet for levelling. Plunger weighing 47.5 gm and each of 50 gm and 100 gm weight including cone and penetration unit. Automatic Inbuilt Timer, Penetration Needle, Copper transfer dish, Aluminium Sample container – 2 sets, Complete with all optional accessories.

PLC Trainer: System Specification : PLC , Make : ALLEN - BRADLEY Micro 800 Series 2080 - LC10 -12AWA /STD Equivalent Micro 810 controller, 8 IN 120/240 ac,4RLY, AC PWR 8 DIGIT INPUT / 4 Digit output, 24V DC,1.5 A POWER SOURCE 4" X 2"X2".I/P - O/P LED Indication on front Panel . Pc Interface FACILITY PC- PLC interface cable 2080- USB Adapter. USB Adapter Plug for 8010 12- pt only /. 2080 LCD, 1.5 LCD display and Key Board for micro 810 only. Necessary I/P - O/P Simulating devices. Ladder Diagram Programming on PC. SCADA SOFTWARE Connectivity for Plc (Optional) .Electrical Control Panel For Simulation Of Digital Circuits

SCR V-I Characteristics Kit (Experimental Board): Experimental Trainer Board comprising of experimental setup for performing V-I characteristics of SCR. The whole experimental set up must be marked (printed) on the sheet (PCB sheet) with specification of each component used and should be duly housed in a suitable metallic/robust enclosure. The board must include the following facilities: 1 .In built power supply with indicator, 2. On/Off switch, 3. Protection against high current and transients. 4.Operating manual with detail procedure and specifications of components used, 5.Suitable numbers of Banana Patch cord(min. 4mm) required for the ETB

TRIAC V-I Characteristics Kit (Experimental Board ): Experimental Trainer Board comprising of Experimental setup for performing V-I characteristics of TRIAC. The whole experimental set up must be marked (printed) on the sheet (PCB sheet) with specification of each component used and should be duly housed in a suitable metallic/robust enclosure. The board must include the following facilities: 1. In built power supply with indicator.2 On/Off switch. 3. Protection against high current and transients. 4. Operating manual with detail procedure and specifications of components used. 5. Suitable numbers of Banana Patch cord (min. 4mm) required for the ETB.

Wi-Fi Card, PCI based: Standards: IEEE 802.11n, IEEE 802.11g, Interface: PCI 2.0; Wireless Frequency Range: 2.4GHz to 2.4835GHz, Security: -WPA, WPA2; Wi-Fi Protected Setup (WPS).

Demonstrator type kit for Cordless Phone: with different test points for observation of waveforms and troubleshooting using block diagram approach range: 50m (or more) included accessories: batteries and power adapter

EPROM Programmer: USB 8051 Programmer AT89C series and AT89S series from Atmel. Supports 8 pin serial EEPROM ICs, Single ZIF socket for easy insertion and removal of ICs for programming. Software compatible with Windows XP, Windows Vista and Windows 7

Experimental kit for Error detection & correction using Hamming code: with built in power supply; On Board Digital Data signal generator and clock generator and a word length of 8, or more; with on-board noise insertion circuit and data receiver

Experimental kit for study of parallel to serial data conversion using USART: with built in power supply; On Board Digital Data signal generator and clock generator and LEDs for observation of Input and Output.

Experimental kit for study of Time division Multiplexing & De-Multiplexing: with built-in power supply, variable on-board data signal generation and LED Indication for outputs

Experimental kit for study of FSK modulation & Demodulation: with built-in power supply, variable on-board data signal and carrier generation and different test points for observation of waveforms

AM Transmitter: Audio Oscillator with adjustable Amplitude & Frequency (300 Hz - 3.4 KHz), Audio Output: Amplifier with speaker Modulators: Balanced Modulator with Band pass Filter (1 MHz) - 2 nos., Balanced Modulator: 1 No. (455 KHz) Ceramic Band pass Filter: 1 No. (455 KHz), carrier Frequency : 1 MHz, Transmitter Amplifier Output gain adjustable) DSB (1 MHz), SSB (1.445 MHz) connected to Antenna/cable

PCM kit: Audio codec : Stereo Inputs : Single ended Number of bits per channel : 16 bits (Left and Right)Sampling Rate : 48, 24, 12 and 6 KHz System clock : 256 x (Sampling clock) Clock Source on-board, Analog Signal Sinusoidal with Frequency up to 3.3 KHz and Amplitude 0 - 5 Vpp

PAM kit: Pulse Output (frequency) : 8kHz, 16kHz, 32kHz ,Function Generators: Sine wave & Square wave with Gain Adjustable

PWM KIT:- Pulse Output (frequency) : 8kHz, 16kHz & 32kHz, Function Generators: Sine wave & Square wave with adjustable gain ,Voice Communication : Voice Link using Dynamic Mini Microphone & Speaker, AC Amplifier : With adjustable gain

Experimental kit for study of ASK modulation & Demodulation: with built-in power supply, variable on-board data signal and carrier generation and different test points for observation of waveforms

Digital Tools ( Logic Clips, Logic Pulsar, IC Tester): Tests a wide range of Digital IC's of TTL 74 Series, 40/45 Series of CMOS IC’s, Peripherals like 8255, 8279, 8253, 8259, 8251, 8155,6264,62256,8288,8284. Auto search facility of IC’s Test by: Truth table/sequence table comparisonZIF: 40 pin DIP ZIF sockets, Key pad with numerical & functional keys, Display: 9 Digit Seven Segment Display, Supply Input Voltage: 230V AC (Digital IC Tester)

Experimental kit for plotting frequency response of a microphone: With built-in power supply & Amplifier, speaker and frequency generator should be incorporated.

Experimental kit for plotting frequency response of loud speaker: With built-in power supply & Amplifier microphone and frequency generator should be incorporated.

Demonstration type Colour Television Receiver: with different test points for observation of waveforms and troubleshooting; System control circuit, video IF, sound, tuner section, horizontal oscillator, horizontal output, vertical oscillator, vertical output, video & chrome section, power supply, av sections blocks

Demonstration type Black & White Television Receiver: with different test points for observation of waveforms and troubleshooting

Demonstration type kit for mobile phone: with different test points for observation of waveforms and troubleshooting using block diagram approach

Microwave oven: Demonstration type kit for Micro wave own with different test points for observation of waveforms and troubleshooting using block diagram approach 20 litres; 2450 MHz microwave frequency; 5 Microwave Power Levels

Microwave oven: Demonstration type kit for Micro wave own with different test points for observation of waveforms and troubleshooting using block diagram approach 20 litres; 2450 MHz microwave frequency; 5 Microwave Power Levels

Radio Receiver: Super heterodyne type Rx, Frequency Range : 980 KHz to 2060 KHz, Intermediate Frequency : 455 KHz Tuning with variable capacitor (ganged), Dial marking on board, Receiving media : Telescopic antenna / Cable Audio Output : Amplifier with speaker Automatic Gain Control : Switchable

Digital IC trainer Kit: Built in power supply providing regulated DC for operation, At least 8 Logic inputs switches, At least 8 LEDs for observing output, Components On-board: NOT, AND, OR, NOR, NAND and XOR gates, 4 Bit Universal Shift Register, 4 Bit Adder/ Subtractor, Flip Flops - RS, JK, Multiplexer, De-multiplexer, Encoder, Decoder, On-board Seven segment Display with inbuilt decoder IC,Patch Cords (at least 30).

Amplitude Modulation & De-Modulation kit: Audio Oscillator(Sine Function) Output : 0-10 VPP , Frequency : 200Hz - 10 KHz, Carrier Output Frequency(Sine & Cosine),Output : 0-10 VPP, Frequency : 2KHz- 100 KHz, Modulator, Phase Locked Loop detector , Low Pass Filter:10 KHz cut-of frequency. Output Amplifier with adjustable Gain; with provision of obtaining DSBSC, SSB modulation using jumpers on the same kit.

Antenna network Trainer: Test points to measure the test signals. Different types of Antennas On board RF & Tone Generators, Transmitting and Receiving levels observed On Built- in Meters, Functional Block indicated On- board Mimics, Fully Documented Operating Manual and Polar Charts. Gain and beam width study. Element current, Front-back ratio study, Antenna-matching.

Cathode Ray Oscilloscope: Two Channel Channel I, Channel II, Channel I & II alternate or chopped, X-Y operation,(Ratio 1:1 Input via CH II), Add/Sub CH I ± CH II, Invert CH II, Intensity and Focus Control, X-pos, Y-Pos controls, Bandwidth : DC -30 MHz, Trigger Bandwidth : 40 MHz, Modes : Auto/ Level. Source : CHI, CH II, ALT-CH I/ CH II, Ext. Slope : Positive or Negative, Component Tester (built in), Display : 8×10 cm, Signal coupling modes - DC, AC, Calibrator : Square Wave generator 1KHz, approximately, 0.2 V, Included Accessories : BNC to BNC -2no, 1x/10x switchable probes - 02 No

PLC Experimental Kit: Allen Bradley PLC Configurable to both 24 V DC & 230 V ac, built in 24V DC power supply With digital and analog inputs & outputs. 16 I/O LED indications on front line panel, 64 k bytes memory. 8 I/O simulating devices(Toggle switch) Provision to interface PLC module with customized system and for student project interface. Relays protected output. Main socket with self illuminated switch and dual fuse protection. All major components is covered with acrylic or transparent sheet. USB based programming. Simulation basedm, 1) Sequential motor starter interface. 2)Star Delta interface, 3)DOL Starter, 4)Water level controller, 5)Reaction vessel interface,6)Resistance welding interface.7) Traffic Light, 8)Car parking interface,9)Piston cylinder interface, Real time working model for automatic sliding gate and Lift control sytem .Ladder programming & PLC to PC Communication software.

3 phase Squirrel cage Induction motor: 5 H.P Three phase squirrel cage induction motor (Star- Delta starter) with complete panel ( proper Loading arrangement, 2 Wattmeter, voltmeter, ammeter required as per specification) to measure the efficiency, power factor, full load current, no load current and must have provision to change the direction of rotation of the motor. The panel must have provision to perform no load and blocked rotor test

Single phase induction motor with Complete Panel: Mains Supply : Single Phase, 230V ±10%, 50Hz, Single Phase Induction Motor Type : Capacitor start, Rating : 1HP, Voltage rating : 230V ±10%, Speed : 1440 RPM (No Load), Insulation : Class ‘B’,Loading Arrangement : Mechanical, Brake drum/Pulley : Aluminium Casted, Analog Meters Used, Voltmeter (MI) : 0 -300V, Ammeter (MI):0 -10A, Wattmeter : 1500W, MCB (SP) : 10A, Tachometer : 20,000 RPM

Lab Model Winding Machine: Drum Winding, No. of Drum- 02, With Disc Type Tensioner, Automatic with Stop Motion

Projection Microscope: with 5x, 10x, 20x, 40x & 100x lenses with fiber cross section kit, high resolution camera and imaging software with measurement facilities

Colony Counter: Type: Microprocessor Based, Display: LED / LCD / Touch Screen, 3 digits, Calibration: up to 3 points with auto buffer, pH Range (pH) 0.00 to 14.00, Accuracy (pH) +- 0.05, Corrosion Resistant: Yes, Power Requirements: 230 V +- 10, 50 Hz AC, Modes : pH mV- C, Parallel temperature indication: Yes, Temperature Compensation Type: Automatic, Temperature Accuracy (Degree C) +- 0.3, Temperature Compensation Range (Degree C), Resolution (pH), Operating Humidity: RH in (%), Operating Temperature (Degree C), 0 to 100, 0.01, 87, 25

LAB INCUBATOR: Conformity to Standards CE, Type of Incubator Bacteriological Incubator, Capacity in liters100-200, Material of Outer Chamber CRCA (powder coated point) Steel, Ambient Temperature in ᵒC5ᵒC above ambient to 60 ᵒC (Bacteriological Incubator), Insulation Ceramic Wool, Type of Display LED, Type of Shelves Removable, Number of shelves-3, Auto power break off Yes, Warranty in Years 01