Laying of BT and CC Roads, Under ground Drainage pipelines and installation of street lights at various locations in Kanakamamidi (V), Moinabad (M) of Chevella Assembly Constituency, Ranga Reddy District.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness complete by mechanical means as per Technical Specification Clause 201 MORTH 5th Revision etc complete and including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of BT Roads Kanakamamidi (V)

Excavation for roadwork and culvert in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with all lifts and lead upto 1000 m as per Technical Specification Clause 302.3 MORD / 301 MORTH including Contractors profit and Overhead charges but excluding Seignorage charges. including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of BT Roads Kanakamamidi (V)

Construction of embankment /subgrade with borrowed useful earth from outside road boundary by mechanical means with all leads and lifts including pre-watering of soil at borrow area, removal of top soil, excavation of soils at borrowed area, conveyance of soil, depositing the soils on the embankment, spreading soils, breaking clods, sectioning and consolidation with Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P and excluding seigniorage charges, as per MoRT&H specification 305 (4th revision) - with a lead charges , including Contarctor's profit and overhead charges excluding seignorage charges, including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc.,Morth -305,RBR-EECD-4(ii). including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of BT Roads Kanakamamidi (V)

Construction of granular sub-base by providing grading VI material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller 80-100 kN / Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH. Mix in Place Method RBR- SBBS-1 A including Contractors profit and Overhead charges but excluding Seignorage charges. including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of BT Roads Kanakamamidi (V)

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting withVibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.13 and Technical Specification Clause 406 MORD / MORTH. including Contractors profit and overhead charges but excluding Seigniorage Charges including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of BT Roads Kanakamamidi (V)

Providing and applying Primer coat with bitumen emulsion(Bulk-Slow Setting-1) over the prepared surface of granular base as Wet Mix Macadam surface at the rate of 6kg /10sqm including cleaning the road surface with mechanical broom and air compressor and spraying uniformly with the aid of bitumen pressure sprayer including cost and conveyance of bitumen emulsion and water,labour charges,cleaning,including Contractors profit and Overhead charges but excluding Seignorage charges. including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., as per MORT&H(5th Revision) specification 502. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of BT Roads Kanakamamidi (V)

Providing and applying Tack coat with Bitumen Emulsion rapid setting-1 over the prepared surface before laying DBM @2.5kg/10Sqm including cleaning the road surface with mechanical broom and air compressor and applying uniformity with the aid of emulsion pressure sprayer including cost and conveyance of bitumen emulsion, labour charges, cleaning, aincluding Contractors profit and Overhead charges but excluding Seignorage charges. including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of BT Roads Kanakamamidi (V)

Providing and laying dense graded bituminous macadam of 50mm thick with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grade-II, premixed with bituminous binder VG-30 @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 507 cincluding Contractors profit and Overhead charges but excluding Seignorage charges. including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of BT Roads Kanakamamidi (V)

Providing and laying bituminous concrete of 30mm thick with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grade-II, premixed with bituminous binder VG-30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 c including Contractors profit and Overhead charges but excluding Seignorage charges. including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of BT Roads Kanakamamidi (V)

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. Thermoplastic Paint (BERGER (Sigmark)/ Asian Paint (Apcomark) or equivalent brand - For Lane & Edge marking - 2.5mm thick in 1 layer. including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of BT Roads Kanakamamidi (V)

Supplying & Fixing of Molded Shanks Raised Pavement Markers made of plastic body moulded from HIPS(Hi-impact Polystyrene) and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 13635 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 – DO III Dt 11.06. 1997. The height and width shall not exceed 20 mm and 130 mm with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 700 Kgs. Fixing will be by drilling holes on the road for the twin shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge.Laying of BT Roads Kanakamamidi (V)

Providing and fixing of Cautionary sign/Warning sign (600mm equi. Triangle) sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of BT Roads Kanakamamidi (V)

Providing and fixing of Object marker(3O0mm equi. Triangle) sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of BT Roads Kanakamamidi (V)

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately. as per Technical Specification MORTH 5th Revision etcincluding Contractors profit and Overhead charges but excluding Seignorage charges. complete for finished item of work and including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of CC Roads Kanakamamidi (V)

Excavation for roadwork and culvert in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with all lifts and lead upto 1000 m as per Technical Specification Clause 302.3 MORD / 301 MORTH including Contractors profit and Overhead charges but excluding Seignorage charges. including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of CC Roads Kanakamamidi (V)

Construction of granular sub-base by providing grading VI material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller 80-100 kN / Vibratory Roller to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH. Mix in Place Method RBR- SBBS-1 A including Contractors profit and Overhead charges but excluding Seignorage charges. including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of CC Roads Kanakamamidi (V)

Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 53 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), with minimum cement 350.00 Kgs coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of , construction joints, curing of concrete slabs for 14- days, and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD including Contractors profit and Overhead charges but excluding Seignorage charges. including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of CC Roads Kanakamamidi (V)

Mechanical trowelling, finishing with sound edges and corners, including hire and operational charges of machinery, labour, fuel etc, complete for finished item of work as directed by Engineer-in-Charge pg 612/752 SSR 25-26 sno 25 C. including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of CC Roads Kanakamamidi (V)

Saw Cut Groove cutting in set concrete upto a depth of 50.0mm including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of CC Roads Kanakamamidi (V)

Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)and including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of CC Roads Kanakamamidi (V)

Carting away the surplus excavated earth/dismantled material/unwanted debris etc, from the work site with a lead of 5.0 km including initial lead including all incidental, labour charges, overheads and contractors profit and also loading& unloding and conveyance etc. including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of CC Roads Kanakamamidi (V)

Engaging JCB for uprooting of trees etc. including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Ordinary soils-Mechcanical Means-Upto 3 m depth. Laying of Under ground Drainage pipe lines from Kanakamamidi (V)

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding dewatering charges etc as per SS - 20 B (APSS 308). including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Ordinary soils-Mechcanical Means-Upto 3 m depth. Laying of Under ground Drainage pipe lines from Kanakamamidi (V)

Supplying and filling robo sand in trenches, sides of the foundations and basement with initial lead in layers not exceeding 15 cm thick consolidatiing each depposited layer by watering and rampping including cost and conveyance of water to work site and all operational incidental, labour charges hire charges and T & O Complete for finished item APSS 309 &310) and including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. Laying of Under ground Drainage pipe lines from Kanakamamidi (V)

Manufacture, Supply and Delivery of 600 mm internal dia R.C.C. NP 3 Spun / Vibrated Cast (Reinforced) Socket and Spigot pipes with M35 grade concrete conforming to B.I.S. 458/2003 at exfactory (rate per meter of effective length) in standard lengths using Sulphate Resistant Cement confirming to IS 12330/1998 including lconveyance to site inclding cost of all materials unloading, hoisting, laying true to aligmnet and gradient by using cranes jointing with rubber rings all other incidental and operational charges and testing,contractor's profit and overhead charges but excluding Seignorage Chrages etc., including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia. Laying of Under ground Drainage pipe lines from Kanakamamidi (V)

Manufacture, Supply and Delivery of various internal dia R.C.C. NP 3 Spun / Vibrated Cast (Reinforced) Socket and Spigot pipes with M35 grade concrete conforming to B.I.S. 458/2003 at exfactory (rate per meter of effective length) in standard lengths using Sulphate Resistant Cement confirming to IS 12330/1998 including lconveyance to site inclding cost of all materials unloading, hoisting, laying true to aligmnet and gradient by using cranes jointing with rubber rings all other incidental and operational charges and testing,contractor's profit and overhead charges but excluding Seignorage Chrages etc., including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia. Laying of Under ground Drainage pipe lines from Kanakamamidi (V)

Reffling with usefull available excavated earth / soils in trenches ,sides of foundations & basement and the pipeline trenches after laid, jointed, executed, tested with intial lead in layors not exceeding 15 cm thick , consolidating each deposited layer by watering consolidting each layer by watering and ramming including cost and conveyonce of water to work site and all operational ,incidental,labour charges,hire charges of T&P ., including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia. Laying of Under ground Drainage pipe lines from Kanakamamidi (V)

Construction of 1.20 M Circular Sewer Man hole of 1.20 mts x 0.55 m of 1.65 M depths with Fly ash bricks in cm 1:6 prop and corbelling too including cc bed ( 1:4:8 ) prop using 40 mm gauge HG Metal 0.10 mt thick and CC (1:2:4) Prop benching / chanelling,internal plastreng with 20 mm thick cm 1:4 and External Plasterng with 12mm thick CM (1:4) with fine rendering including cost and fixing of CI steps and fixing FC/ CI cover and frame but excluding the cost of cover and frame, including the cost and conveyance of all materials at site complete and curing for 21 days complete all taxes seignarage charges as per specification etc complete. For 600 mm dia RCC NP3 pipes - 1.65 M depth including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia. Laying of Under ground Drainage pipe lines from Kanakamamidi (V)

Construction of 1.20 M Circular Sewer Man hole of 1.20 mts x 0.55 m of 1.65 M depths with Fly ash bricks in cm 1:6 prop and corbelling too including cc bed ( 1:4:8 ) prop using 40 mm gauge HG Metal 0.10 mt thick and CC (1:2:4) Prop benching / chanelling,internal plastreng with 20 mm thick cm 1:4 and External Plasterng with 12mm thick CM (1:4) with fine rendering including cost and fixing of CI steps and fixing FC/ CI cover and frame but excluding the cost of cover and frame, including the cost and conveyance of all materials at site complete and curing for 21 days complete all taxes seignarage charges as per specification etc complete. For 900 mm dia RCC NP3 pipes including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia. Laying of Under ground Drainage pipe lines from Kanakamamidi (V)

Supply & Delivery of manhole covers and frames with ISI marking anywhere in T.G., F.O.R. destination including, loading, un-loading & stacking at site but excluding taxes as applicable ISI mark H.D.-35 with 560mm dia clear opening and including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia. Laying of Under ground Drainage pipe lines from Kanakamamidi (V)

Fabrication, Transportation, and supply of hot dip galvanized Octagonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including chain for anti-theft mechanism, supply of suitable boards with Bakelite sheet, din channel for MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for 7.50 Mtrs height Pole having dimensions Bottom 130mm, Top 70mm with 3mm thick, base plate 220 x 220 x 12mm and 4 Nos of M20 x 700mm long 'J' bolts along with template or equivalent. as directed by engineer-in-charge Makes: BAJAJ / VALMONT / TRANSRAIL / SKIPPER / UTKARSH / LAASMA / CONSOUL and including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia.For Street Lights from Kanakamamidi (V)

Foundation and erection charges with special T&P, for 7.50 Mtrs long Octagonal / Conical pole duly erecting on base plate duly provided 4 Nos foundation bolts with nuts with providing of 0.45Mtrx0.45Mtrsx1.20 Mtr size M20 cc work vibrated concreting mixing with necessary steel (10kgs) reinforcement as directed by the field engineers during execution including centering, decentering, water curing as required, soil exacavation, back filling, muffing removal and coil earthing and including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia.For Street Lights from Kanakamamidi (V)

Fabrication, Transportation and supply of 1.0 Mtr single arm bracket with dooms.complete with all accessories with MSgalvanized 50mm dia Pipe.Makes: BAJAJ / VALMONT / TRANSRAIL / SKIPPER / UTKARSH / LAASMA / Vakrangee / Surya and including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia.For Street Lights from Kanakamamidi (V)

Supply and transportation of 90w+/-10%(>=9000 Lumens) LED Street light Body made of high grade pressure die – cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >100 lumens/watt, with Ingress protection IP66, Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia.For Street Lights from Kanakamamidi (V)

Supply and laying of 16 Sq.mm 4 Core XLPE insulated, 1100V grade armored aluminum cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes : Torrent / Unicab / Universal / Polycab / Havells / Gloster / KEI / Finolex / Paragon / RR kable / Beljin / Ollivin and including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia.For Street Lights from Kanakamamidi (V)

Supply and laying of 25 Sq.mm 3.5 Core XLPE insulated, 1100V grade armored aluminum cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes : Torrent / Unicab / Universal / Polycab / Havells / Gloster / KEI / Finolex / Paragon / RR kable / Beljin / Ollivin and including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia.For Street Lights from Kanakamamidi (V)

Supply and run of 2.5 Sq.mm 3 core PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade up to 1100 Volts as per IS: 694:1990 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard and including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia.For Street Lights from Kanakamamidi (V)

Fixing Charges of LED Luminare on street light poles and including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia.For Street Lights from Kanakamamidi (V)

Supply, Transportion and laying of outer dia 50mm and Inner dia 38mm of Double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II with all accessories like couplers, bends, end caps, Ts etc., complete. including excavation and refilling the trench of 1feet width & 2ft depth and laying of duct for complete finished item of work. Makes: DURA LINE (Dura Guard) / Bajaj / Gamson / Ultra Plus / CPE and including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia.For Street Lights from Kanakamamidi (V)

Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete and including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia.For Street Lights from Kanakamamidi (V)

Supply and fixing of 6-32A SP MCB10KA, C/D Curve ISI Mark. Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Crabtree and including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia.For Street Lights from Kanakamamidi (V)

Providing independent earthing by excavating a pit to a depth of 2.1Mtr in all soils as per size specified in the data using 80mm dia CI Pipe of 3.00Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges e.t.c.. and including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia.For Street Lights from Kanakamamidi (V)

Supply and fixing of suitable out door feeder pillar box of size made with 14 SWG CRCA sheet with double door arrangement, making powder coating after processing of 7 Tank process, lock and key, hinges, rubber gasket, danger board, suitable angle iron stand for mounting the feeder pillar with cement concrete, including Supply and fixing of Legrand / Schneider make 63A, 4 Pole isolator as incomer, 6 Nos 6-32A as out goings, indication lamps, din channel, 6 Sq.mm 3 core copper cable for individual light control, connectors, bus bars, shroudings, gland plates and provision for 3 phase energy meter etc., complete for finished item of work and suitable wiring provision for connecting the nature switch with following. and including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia.For Street Lights from Kanakamamidi (V)

Supply of heavy duty long barrel aluminum lugs confirming to I.S specifications suitable for Up to 16 Sq.mm cable etc complete with nuts, bolts, and washers. Makes: DMI / Jainson / Dowels or equivalent make as approved by the department and including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia.For Street Lights from Kanakamamidi (V)

Supply of heavy duty long barrel aluminum lugs confirming to I.S specifications suitable for Up to 95 Sq.mm cable etc complete with nuts, bolts, and washers. Makes: DMI / Jainson / Dowels or equivalent make as approved by the department and including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia.For Street Lights from Kanakamamidi (V)

Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for 16Sqmm 4Core XLPE insulated armoured cable including terminal connections in the box complete.Makes: SMI / Commet / Dowels and including contractor profit and overhead charges but excluding seigenorage charges complete for finished item of work for trench cutting and as directed by the Engineer-in-Charge. 900 dia.For Street Lights from Kanakamamidi (V)