SPECIAL REPAIRS TO OTM BLDG NO E-26 AND E-30 AT MTR REGT AT ARTY CENTRE HYDERABAD UNDER GE GOLCONDA

Dismantling of AC sheets / Galvalume sheet / GI Sheet of corrugated or semicorrugated etc. sheets in roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Material and labour Preparation of old painted steel surfaces of any description over 10 cms width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F MS framed Angle sections as in posts main and cross beams, hip and jack rafters; purlins where connected to common rafters and drilling holes for existing wooden/steel angle rafter; fixed with angle cleats MS Screw bolts necessary welding to purlins or other connecting plate of Grade Fe 410 -W (Gde- E- 250) quality- A etc. complete all as specified and directed.

Material and Labour for Steel work in tubular trusses & vertical post including special shaped washer etc using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade st-240 complete all as specified and directed.

Material and Labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primercomplete all as specified and directed.

Material and Labour pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and Labour pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling of boarding, any description fixed in any position with nails complete all as specified and directed by Engr-in-Charge.

Providing and fixing false ceiling at all heights with GRG (Glass Fibre Reinforced gypsum)False ceiling tiles of size 595 x 595 x 12 mm thick semiperforated micro tegular edged GRG false ceiling of approved texture, design and patterns having moisture contents less than 2% humidity resistance of 99% NRCO.50 to .75 as pe IS8225:1987, Noncombustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (Minimum) to be laid in true horizontal level suspended on interlocking metal T Grid of hot dipped galvanized iron section of 0.33 mm thick ( galvanised @ 120 gms per sqm including both sides ) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600mm, suspened from ceiling using galvaized mild steel items ( galvanizing @ 80 grams per sqm) i..e 50mm long, 8mm outer diameter M-6 dash fastener 4mm dia fully threaded hanger rod upto 1000mm length and L-swhape level adjuster of size 85x25 x 2mm galvanised iron permieter wall angle of size 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm ceneter to centre and 50mm long dry wall wood screws. The kwork shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed.

Taking down cement plaster on wall of any desdriptions incl racking out joints for key scrubbing with water etc complete all as specified and directed.

Material and Labour for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 (1 cement 6 river sand) complete all as specified and directed.

Material and Labour for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1: 4 (1 cement 4 river sand) complete all as specified and directed.

Material and Labour for rendering 15mm thick in two layers using natural river sand (10mm & 5mm) cement mortor 1:4 on concrete or brick wall surfaces, 5mm thick finished even and smooth without using extra cement, mixed with WPC @ at 3% by weight of cement (IWPC measured and paid separately) complete all as specified and directed.

Supply only integral water proofing compound.

Material and Labour for Dubbing out irregular surfaces of wall using natural river sand average 10mm thick in CM 1:4 complete all as specified and directed.

Material and Labour for rendering using natural river sand 10mm thick in cement mortor 1:6 on Brick wall surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Material and Labour for two coats of oil bound distemper over a coat of alkali resistant primer on newly plastered surfaces of walls including 3mm thick wall care putty in two layers 1.5mm each coat on wall and preperation of surface complete all as specified and directed.

Material and Labour for preparing new plastered surfaces of walls and applying Two coats of cement based paint over a coat of primer complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors,plinth Protection, aprons etc Laid, bed-ded and pointed in any mortar,complete all as specified and as directed.

M&L for providing cement concrete 25mm thick type B0 1:2:4 (12.5mm graded stone aggregate and river sand) as in sub base in floor complete all as specified and directed.

Material and labour Mirror finish/ polish Machine cut kota stone slab flooring 20-25mm thick over 20mm thick screed in CM 1:6 over PCC sub base/RCC slab. laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

Material and labour Mirror finish/ polish machine cut Kota stone slab 20-25mm thick in riser of step, skirting, dado & pillar laid over 10mm thickbacking coat of CM 1:3.& jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding, mosaic backing complete and removal of rubbish of the premises complete all as specified and directed by Engr-in-Charge.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.16 sqm, in floors etc, and cement screed in CM 1:6, 15mm thick and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M & L for glazed coloured ceramic tiles in vetical surfaces of size 450mmx300mmx7mm thick laid over 10mm thick back coat in CM (1:4), set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles, complete all as specified and directed.

Material and Labour plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded complete all as specified and directed.

Material and Labour for 75 mm thick PCC 1:3:6 type C2 (Using 40 mm graded granite stone aggregate & fine aggrigate natural river sand) as in plinth protection finishd even and smooth with out using extra cement complete all as specified and directed.

Material and Labour for Hard core of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Supply and fix Windows of Double Rebate windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 5 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including taking down existing steel windows and making good disturbed surfaces all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame exc 1.5 Sqm and n.exc 4 Sqm each and offered as credit.

All as per Sl item No.34 above here in before but n exc 1.5 Sqm

S&F Pressed steel frames 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied & fixed complete all as specified and directed.

Material and labour IInd Class hard wood 35mm Double/Single Flush door shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

Material and labour Second class hard wood 35mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers complete all as specified and directed.

Material and labour Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed withn wooden beading or with nuts and bolts to existing steel windows/wooden windows complete all as specified and directed.

M&L FI 25x3mm for hold fasts Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintle hinges; large hasps & staples; chains; hand made slidings bolts; clamps; hold fasts; wall ties; hook for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; plate washers & similar small articles conforming to Fe 290 GDE E-165 complete all as specified and directed.

Supply and fixed Butt hinges,100mm medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F Extruded aluminium alloy handles,150mm fabricated type anodized complete all as specified and directed.

S&F Alluminium, 200mm anodized, barrel tower bolts extruded section & fixed complete all as specified and directed.

Supply and fixing 300mm Mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, four on bolts plate & two on staple plate & fixed complete all as specified and directed.

Preparation of New or previously untreated steel Surfaces of any description, not otherwise described, over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of Primer complete all as specified and directed.

Preparation of New or previously untreated wooden Surfaces of any description, not otherwise described, over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of Primer complete all as specified and directed.

S&F 150mm Floor door stopper of aluminum alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Supply and fix Mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete.

Material and labour Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification all as directed.

Material and labour Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck insid complete all as specified and directed.

Supply and Fix 100mm Butt hinges, extruded Aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-22 complete all as specified and directed.

Supply and fix Alluminium, 150mm anodized, barrel tower bolts extruded section & fixed complete all as specified and directed.

S&F in repair stainless steel curtain rod 20 mm dia incl Mild steel chromium plated brackets suitable for curtain rods of 19/20mm dia, including taking off the old articles (Pelmets/wooden/arrangement of curtain), plugging up new key holes, making good the dusturbed surface and painting one coat on disturbed surface as required complete fixed in repairs all as specified and as directed.

Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in Hard/ Dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil complete all as specified and directed.

M&L for plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in foundation filling, mass concrete and similar works and for MS Pipe fixing complete all as specified and directed.

S & F for Framed work as in water staging, doors or gates of angle or other section with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, Fe 410-W (Gde-E-250) quality-A, etc complete all as specified and directed.

Taking down 15mm bore steel tubing and connections in any position, Complete all as specified and directed.

Taking down 20mm bore steel tubing and connections in any position, Complete all as specified and directed.

Taking down 25mm bore steel tubing and connections in any position, Complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 for concealed water tubing, etc.& making good, cutting not exc 10 cm grith complete all as specified and directed.

Supplying and fixing of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including provision of special fittings ( Unions, elbow, Tee, Male threaded brass adaptor, Female threaded brass adaptor, Tank adaptor etc), complete all as specified

M&L for 20 mm bore GI Tubing medium grade with all fittings fixed to wall/ ceiling or in floor complete as specified and directed.

M&L for 25 mm bore GI Tubing medium grade with all fittings fixed to wall/ ceiling or in floor complete as specified and directed.

S&F rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) of 500 ltrs capacity hoisted and fixed in position all as specified including dismantling old tank complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) of 1000 ltrs capacity hoisted and fixed in position all as specified including dismantling old tank complete all as specified and directed.

S&F 20 mm dia brass ball valve, high pressure with polythene float and fly-nut complete, screwed for iron pipe or brass ferrule fixed in repair complete all as specified and directed.

S&F in repair 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 25mm bore dia Gun metal Gate valve with iron wheel head screwed both ends for iron pipe or for union, complete all as specified and directed.

S & F in repairs, vitreous china Squatting pan Orissa pattern of size 580mx440mm with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete, all as specified and directed.

S & F in repair vitreous china bowl urinal flat back size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern & flush pipe) but exncluding waste pipe, complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and directed.

Supply and fix PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified and directed.

Supply and fix vitreous china wash basin, white, ovel shape size 550 x 400mm , 01 No. fancy type chramium plated piller tap, CP stop cock & 450mm long PVC connection, 01 Nos 32mm waste coupling and pipe including cutting Granite slab for placing wash basin nosing edges complete all as specified and directed

S & F in repair 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union fixed complete all as specified and directed.

S&F in repairs 15 mm dia fancy type stop valves/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F for wash down water closet (pedestal pattern) complete white with plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern incl pedestal pan and trap, and connection to drain (or outgoing pipe)complete all as specified and directed.

S&F in repair two way bib tap / cock 15mm bore, chromium plated, fancy type complete all as specified and directed.Make : Jaqur COP-041PM 2-way Bib Cock with Wall Flange or equivalent complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. complete all as specified and directed.

S&F in repairs PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends fixed complete all as specified and directed.

S&F in repairs 15 mm dia fancy type conceled stop valves/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S & F brass chromium plated tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated complete all as specified and directed.

Supply and Fix PTMT Shelf of weight not less than 300 gms with soap dish (tray) fixed with and including Chromium plated brass screws and wooden / plastic cleats etc., complete all as specified and as directed.

S & F PVC( SWR ) pipes 110mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to wall incl taking down existing pipe complete all as specified and directed.

S & F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors incl taking down existing pipe complete all as specified and directed.

S & F PVC( SWR ) pipes 75mm dia single socketed , in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) laid in trenches incl taking down complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110mm bore complete all specified and directed.

S&F in repair PVC (SWR) bends with access door any radius 110mm bore complete all specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 110mm complete all specified and directed.

S&F PVC(SWR) vent cowl 110mm bore complete all specified and directed.

S&F PVC (SWR) bends any radious 75 mm dia complete all specified and directed.

S&F PVC (SWR) bends with access door any radious 75 mm dia complete all specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal of bore 75mm complete all specified and directed.

S&F in repair PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all specified and directed.

S&F for PVC waste pipe for Sink/WHB with fitting etc 38 mm dia. 60mm long complete all specified and directed.

Supply and fix in repairs mosquito net hanging rod 6mm dia MS round bar of full length of barrack (each barrack 4 lines) fixed with end outside of wall MS plates. Size 100mm x 100 mm 2 Nos. Tightening with MS bolts requires drilling holes into walls, painting steel, repairing disturbed areas of wall surface, necessary welding, cranking, hooking etc. completing all as specified and directed.

Dismantling Stone slabs/ tiles, floors, paths, aprons etc any description or thickness and S&F 60mm thick M-35 grade factory made rubber moulded precast concrete interlocking paver block in grey cement with pigments and of approved size and shape and conforming to IS 15658-2006, laid over 50mm thk sand bedding layer laid to true line, level watered and mechanically compacted etc complete all as directed.

Dismantling chequered floor tiling incl cement mortar bedding and M&L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and pigment, machine pressed, set jointed and pointed in neat cement slurry in floors id over 20 mm thick screed bedding layer in CM 1:6 complete all as specified and directed.

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level) complete all as directed.

Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completeall as specified and as directed.

M&L for PCC type E2 1:5:10 (using 40mm graded stone aggregate) as in foundations, filling and mass Concrete complete all as specified and directed.

Supply and fixing powder coated aluminums frame for partations, doors, door shutters, windows, window shutters, ventilators, grills and Sliding windows and window grills, including necessary joining cleats, rubber packing, handles, hinges, locking arrangement for sliding windows, screws etc. complete all as specified all as specified

S&F 5.5 mm thick glass fixed in aluminium cup board/door/window/ventilator with aluminium beading complete all as specified and directed.

M&L 12 mm thick pre-laminated, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to aluminium frame with aluminium beading complete all as specified

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Pre Cast Cement Concrete 1:2:4 type B1 (using 20 mm graded aggregate) as in Cover slab for manholes etc set in cement mortor 1:4 including use and waste necessary form work (Reinforced shall be measured and paid seprately) all as specefied

M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M & L for providing point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLSH unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and including non metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed wiring on stone/brick, masonary walls, roof etc including modular sunken box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling for one light/ fan /bell point controlled by one oneway modular switches including one run 1.5 sqmm (nominal area) PVC insulated FRLSH unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified & directed at site. Note : Cutting/running chases, pinning in shall be measured seperately for concealed point wiring ( One Concealed Point wiring shall be measured as 2.5 RM Cutting/running chases, pinning in.

All as per ser item No 108 here in before but for one 3 pin socket outlet 5 Amp independent.

All as per ser item No 108 here in before but for one 3 pin socket outlet 5 Amp on same board.

All as per ser item No 108 here in before but for one 3 pin socket outlet 15 Amp independent board using cable of size 4.0 sqmm.

S&F in repair Modular switch, single pole, one way, 6 Amps one module complete all as specified and as directed.

S&F in repair Modular 6A 3 pin universal socket outlet, 2 module complete all as specified and as directed.

S&F in repair Modular switch, single pole, one way, 16 Amps one module complete all as specified and as directed.

S&F in repair Modular socket outlet 2-in-1, 6/16 Amps, 2 module complete all as specified and as directed.

S&F in repair lamp holder insulated body with back plate suitable for battern fittings complete all as specified and directed at site.

S&F in repair Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed at site.

S&F in repair 9 W LED bulb of base B22d with color temp 6500K all as specified and directed.

S&F in repair modular stepped type electronic fan regulator 220 volts, 100Watt complete all as specified and as directed.

S & F 20 W surface / wall mounted LED batten having PC diffuser, luminous efficacy of minimum 100 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 10%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineer-in-charge. Make-STOUTMINI1200BS20ELED865SPCWH OF HAVELLS/PHILIPS/WIPRO

Supply & fix in repair LED down lighter 2'x2' , 35/36 W environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling complete all as specified and directed.Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with highefficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. Make : VENUSTREND2X2PLR36WLED857SWH of Havells/Wipro/Philips

S&F in repair Factory made Prewired TPN 4 ways distribution board in sheet steel enclosure vertical double door with suitable rated bus bar, 240 Volts suitable for housing TPN MCBs as incomer and SP MCBs as outgoing complete all as specified and as directed.

S&F in repair MCB, Four pole, 240 volts, 63 Amps 10 KA C curve complete all as specified and as directed.

Supply and fix RCBOs SPN 32 Amp, 240 volts 50Hz AC supply, complete all specified and directed.

Supply and fix Sheet metal enclosure IP-43 double door for DBs(where MCBs are reqd) SPN 240 V, for 08 ways, complete all as specified.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and current carrying capacity (SP)6-32A in the MCB DB complete with connection testing and commissioning, complete all as specified and directed.

M&L Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead complete all as specified and directed by the Engr-in-charge.

Supply and fixing LED Building security light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

M&L for Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 6 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead in and including PVC conduit medium gradewith all fittings suitable for concealed type complete all as specified and directed.

Supply and lay 50 mm dia bore galvanized iron pipe Medium grade including fittings and fixtures complete all as specified and directed.

Supply and lay 25 mm dia bore galvanized iron pipe Medium grade including fittings and fixtures complete all as specified and directed.

Supply and fix gun metal globe valve 50mm bore conforming to IS 9338 , complete all as specified and directed.

Supply and fix gun metal gate valve 25mm bore, complete all as specified and directed.

Cutting/Boring on the existing CI/GI/DI pipe line of any sizes and reducing to required length before laying and insertion of Ts of 80x80x50mm and branches for 50mm all as specified and as directed.

Excavation in trenches in any type of soil not exc 1.5 mtrs wide and not exc 1.5 mtr in depth for laying of pipe/ cables/ poles/fencing posts etc and getting out hard & densile soil complete all as specified and as directed.

Returning fitting in any type of soil including spreading leveling watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removing excavated soils to a distance n.exc. 50 mtr and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.

Supply, lay/ spread in trenches clean river dry sand for cushioning of cable to the full width of excavated trench, 8cm thick before laying cable and 15cm thick above the cable, gently punned down, stretching and testing of cable on transformer yard etc., complete all as specified and as directed. Note: Punned thickness only will be considered or payment.

Supply and laying in replacement un-reinforced precast concerete cable cover, class LV, type 1 flat size 250mm x150mm x 40mm for cable protection complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core

Supplying, installing, commissioning and testing in repair factory made outdoor type LT Kiosk box with canopy of size 750mmx500mmx450mm made out of 3.15mm thick CRCA sheet duly powder coated and locking arrangement, with 4 nos 200 Amps aluminium busbar and 4 nos aluminium lugs of size 40mmx5mm of length 75 mm including grouting in PCC 1:4:8 type D2 and taking down old unserviceable LT Kiosk box complete all as specified and directed.