Loading…
Loading…
Tender ID
Tender Value
₹13.5 Cr
EMD Value
₹8.3 L
Closing Date
20 Feb 2026, 3:30 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
Above/Below/Par
BRIDGE
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-III, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Similar nature of works for the above work is as under: - Fabrication and erection of steel structure or launching/de-launching of any steeel girder/industrial shed/micro wave towers/transmission line towers/platform shed/steel staging work/steel chimey works/etc.
Maintenance period - 48 Months from the date of completion of work.
19 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
All rates quoted in the tender shall be deemed to be inclusive of all Taxes royalties payable by the contractor's to the Government or public body or local authority and no additional amount will be paid or claim entertained on this account by the Railway.
It is responsibility of the tenderer that they ensure to see any corrigendum of the tender to check the corrigendum on the website from time to time.
The tenderer shall inspect the proposed site of work and acquaint himself/themselves with the site conditions, working hours, layout of laid trees and shrubs that he/they cut for making stacking, space for aggregates approach road, path way available working area, local conditions etc. and all other relevant items connected with the execution of the work. No claims shall been entertained from the contractors for making his/their own arrangement for approaches/approach roads etc. in and outside Rly Land and contractor will bear entire expenses such as road taxes, payment for right of way etc. to outsiders and for constructions of approaches/approach road etc.
The tenderers shall not add any conditions on their own either in their covering letter or in the tender documents while submitting their offer. Any such conditions if stated and if are in violation of the Railways tender conditions or having financial implication may lead to summary rejection of the offer. Railway reserves the right to rejects such tenders summarily without assigning any reasons whatsoever.
JOINT VENTURE will not be permitted for the tenders valuing less than or equal to Rs 10 crore.
It is the responsibility of contractor to arrange the payment of the labour employed for the work through bank and to deduct PF as per the provisions of Minimum Wages Act.
In case of any wrong information submitted by tenderer, the contract shall be terminated, Earnest money Deposit(EMD), Performance Guarantee(PG) and Security Deposit (SD) of contract forfeited and agency barred for doing business on entire Indian Railways for 5 (five) years.
The railway reserves the right of verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not be relieve then bidder of its obligations or liabilities hereunder nor will it affect any rights of the Railway thereunder.
General Arrangement drawing for the work can be seen in the office of the Dy. CE/Br Line/ WCR BPL's office at any time during the office hours. These drawing are only for the guidance for the contractor. Detail working drawing if required based generally on the drawing mentioned above and various condition mentioned in tender documents shall be submitted by the tenderer for approval of the same by railway.
The tenderer(s) / Contractor(s)shall upload along with the tender photo state copy of credentials for having successfully executed works of similar nature and required magnitude in the recent past. Tenders not accompanying with these documents are liable to be rejected.
The tenderer(s) / Contractor (S) shall upload a list of works which are currently being executed by them, their contact value and date of completion.
Bhopal Division-CHOKA-MIDGHAT section- Replacement of girder of Gadariya bridge to remove infringement for movement of DSDC trains.
DYCE-Br-L-BPL-OT-01-2026~WCR
DYCE-Br-L-BPL-OT-01-2026
Open
Works - General
18 Months
Bhopal, Madhya Pradesh
₹0
₹8.3 L
20 Feb 2026
21 Jan 2026
6 Feb 2026
31 items across 2 schedules · ₹14,76,65,287.59 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Fabrication and Supply at site various steel section i.e. plates, angles, channels, RSJ, H.D. bolts, nuts, washer etc. conforming to IS:2062 and cut in required shape and size as per approved plans, specification and special condition including drilling of holes with all contractor's tools, plants, labour etc. | MT | 92.00 | 83,032.92 | 76,39,028.64 |
| 2 | Erection/Assembly of fabricated steel structure with all contractors labours, scaffolding, tools & plants including provision of service bolts and drilling holes as per requirement in existing members for erection as directed by Engineering in charge. | MT | 92.00 | 9,489.19 | 8,73,005.48 |
| 3 | Dismantling of steel work on bridge without damaging any components of the spans. Note:- Member which are not to be reused may be cut gas/flame cutting. | MT | 80.00 | 4,694.84 | 3,75,587.2 |
| 4 | Fabricating, supplying and fixing of 6 to 8 mm thick steel chequered plate conforming to IS: 3502 for pathway, trolley refuges, floor for the bridge including fixing the same over steel channel sleepers by drilling holes in channel sleepers and trolley refuge including nuts and bolts, tools and plants, labour as a complete job. (Similar item vide USSOR-2011 item no.- 211040) | MT | 17.00 | 91,469.11 | 15,54,974.87 |
| 5 | Supplying and driving snap head rivets of 16to 23.5mm dia in the various member of the bridge complete with contractors labour, tools, plants etc. as directed by the Engineer in-charge. Rivets should confirm to IS: 1149 &IS: 1148. | Numbers | 5000.00 | 179.97 | 8,99,850 |
| 6 | Accurate marking and then drilling of 19.5mm to 23.5mm dia hole in the existing girder member, with contractor, labour, tools and plants, equipments an other resources etc. complete as per specification, the detailed scope of works and as directed by the engineer-in-charge. a) In Situ. | Numbers | 700.00 | 72.62 | 50,834 |
| 7 | Fabrication supplying and fixing H-beam sleepers with all fittings and fixture as per RDSO drawing number B-1696/4,5 & revision with latest alteration or approved drawing supplied by railway and specification complete including supply and riveting of canted bearing plate. the rates shall be inclusive of removing of existing sleepers. all cost preparing and supplying H beam from (ISHB) from standard rules rolled section confirming to IS 2062 grade B including supplying complete set of required fittings and fixture duly galvanized at per specification and transporting the sleepers from contractors workshop to Bridge site Railway depot including loading unloading and stacking with all lead lift decent crossing of a fraction Nala track etc. handling Re handling other incidental Works etc. As may be required and including all taxes duties octoroi, royalty and inspection charges. | Each | 360.00 | 27,997.91 | 1,00,79,247.6 |
| 8 | Drilling of holes, insertion of bolts in ballast retainer and epoxy grouting the bolts including supply of bolts with nuts and washer as per drawing and instruction of railway's Engineer with all contracor's labour, tools, plants, etc. complete in all respect. Note:- Item will also be applicable for drilling hole in bed block. | Each | 144.00 | 609.84 | 87,816.96 |
| 9 | Rehabilitation of cracked/ spelled portions of the existing PSC/RCC Girder and bed block by Epoxy mortar including removing of loose and perished concrete and cleaning by hard steel wire brush before applying Epoxy mortar etc. complete with contractor's material. Epoxy mortar of laid down specifications, consumable tools and plants, scaffolding, labour etc. complete as required as per specification, detailed scope of work as attached with the tender and as directed by Engineer-in-charge. | Kg | 350.00 | 602.17 | 2,10,759.5 |
| Schedule total | ₹2,17,71,104.25 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .