supply and erection of submersible pump 3 H.P and Three Phase Panel Board and HDPE Pipe Laying Work at Ward No 2 Rangaraj Layout in Karamadai Municipality

Amount

Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.SS 20 A

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Supplying and delivery of Single phase submersible motor having duty condition with 20 LPM against 150 m Head confirming to ISI Mark IS 8034 With Panel Board etc complete as per standard specification(Rates including all taxes)

Supply and delivery of Three phase panel Board with two level Guard and Auto start of reputed make confiriming to ISI standard specifications (Upto 6HP TWAD Schedule Item No.11.0)

Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feetx1-1/2feet using angle iron of size1-1/2"x1-1/2"x1/4"rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos.63A fuse units (500V),1No.neutral link,copper earth flat of size 1"x1/4"with inter connection of EB meter to fuse unit sby 16Sq.mm PVC insulated copper wire with 1No 63Amp 30MAF our Pole RCD/RCCB (HigherEnd) with suitable necessary connection with earth connection complete

Supply and delivery of submersible 4.00sqm PVC Insulated and sheathed 3 core Flat type copper cable confirming to IS694/1990 (TWAD Schedule Item No.12.1) Supply and delivery of following GI & PVC pipes as per ISI standard specifications

63 mm HDPE PIPE

63 mm HDPE Collar

2" Flange Washer

2" Heavy Clip

4" GI Elbow

63 A main switch

63 A Fuse Carrier

earth plate

Stay wire

2" hose Clip

4 Way Roll

PlyWood 5' x 2'

Roofing with Galvanised Coruugated Iron Sheet of 0.8mm thickness - 10 m2 Galvanised iron corrugated sheets (including 15 cm. Lapping) 0.8mm thick

Flyash Brick Partition Walls using II class ground moulded chamber bricks of size 9"X43/8"X 23/4" in C.M 1:3 (One part of Cement and Three part of Crushed Stone Sand (M- Sand)) using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification - 10 sqm Ground Floor.

Supply and run of 4 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains SD 64

Supply and run of 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 69

Plastering with cement mortar (1:5) 12mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Refilling with excavated soil (other than sand) complying with the standard specification for filling in foundation and basement

Earthing as per P.W.D. standard with an earth electrode of 2Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work. etc, complete as per standard specifications SD 212

Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 A per way with 100 A TPN MC switch with suitable trunking box Ms cable entry boxes and internal connection on suitable angle iron frame work with earth connection etc, complete as per standard specifications SD. 150

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40 A 4 pole MCB isolater as incoming and 12 Nos. 6A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark etc, complete as per standard specifications SD.529

Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8 SWG GI wire at the equal interval of 1.5m etc, complete as per standard specifications SD.75

ravikumar muralikumar (BID ID -1453360)