WELCOME MAINTENANCE TO BUILDINGS AND CERTAIN PETTY REPAIR WORK, DAY TO DAY MAINTENANCE AND CLEANING/REPAIR OF SERVICE WATER TANKS AND CERTAIN ALLIED B/R WORKS AT ZONE B LAB AND RESIDENTIAL AREA UNDER GE I RnD DELHI

Amount

S&F In repair 15 mm dia GI steel tubing medium grade galvanised with all new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair GI steel tubing medium grade galvanised 20mm dia with all new fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repair small fittings galvanised iron medium grade such as sockets, elbow, nipple,tee,union and hexa nipple etc as requiered for GI tubing for 15mm bore pipe complete all as specified and directed.

All as per Item ser No 3 above but for 20mm bore pipe.

S&F in repairs ball valve high pressure of PTMT complete with aluminum rod with polyplast ball for 15mm dia iron pipe complete all as specified and directed.

All as per Item ser No 4.00 above but 20mm bore.

S&F rotational moulded polythelene water storage tank triple layered (cylindrical vertical with closed top) hoisted and fixed in position 500 litres capacity including taking out old unserviceable water tank disonnecting and refixing the GI pipe and fittings complete all as specified and directed.

S&F rotational moulded polythelene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position capacity 1000 litres capacity including taking out old unserviceable water tank complete all as specified and directed.

S&F rotational moulded polythelene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position capacity 750 litres capacity including taking out old unserviceable water tank complete all as specified and directed.

S&F rotational moulded polythelene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position capacity 2000 litres capacity including taking out old unserviceable water tank complete all as specified and directed.

Cleaning and removing all scale and dust from tanks of capacity exc. 250 liters but n exc. 500 litres and from mouth of circulating pipe etc including disconnecting water pipes, tanks if necessary and refixing the same after necessary cleaning and writing letters "TANKS CLEANED ON" and date in "DDMMYYYY" format in any tint, as per requirement not exceeding 7.5cm in height letters using synthetic enamel paint complete all as specified and directed.

All as per item Ser No 11.00 above but capacity of tank exc.500 ltrs but n.exc.1000 ltrs

All as per item Ser No 11.00 above but capacity of tank exc.1000 ltrs but n.exc.2000 ltrs

S&F in repairs 20mm gun metal, globe or gate valves wih iron wheel head,screwed both ends for iron pipe complete all as specified and directed.

All as per item ser No 14.00 above but 25mm dia

All as per item ser No 14.00 above but 40mm dia

S&F PVC over head water tank cover for tank capacity 500 litres with fixing bracket and screw complete all as specified and directed.

S&F PVC over head water tank cover for tank capacity 750 litres with fixing bracket and screw complete all as specified and directed.

S&F PVC over head water tank cover for tank capacity 1000 litres with fixing bracket and screw complete all as specified and directed.

S&F PVC over head water tank cover for tank capacity 2000 litres with fixing bracket and screw complete all as specified and directed.

S&F in repair PVC valveless 10 litres capacity syphonic action type flushing cistern low level white with inlet ball valve float and handle push type including flush pipe 32mm dia and connection to WC complete all as specified and directed.

S&F in repair angle valve 15mm dia cast copper alloy chromium plated fancy type with capastan head screwed both ends for iron pipe or for union complete all as specified and directed.

S&F Bib taps 15mm dia brass chromium plated fancy type with capstan head screwed down screwed for iron pipe or for brass ferrule & fixed in repair complete all as specified and directed.

S&F in repair vitreous china squatting pan 'Orissa' pattern long pan size 580 x440 mm white with integral foot rests (excluding cistern and flush pipe) complete all as specified and directed.

S&F in repair Vitreous china wash down water closet (pedestal pattern) white complete, including connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed.

M&L in repair 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4) complete all as specified and directed.

S&F in repair sand cast iron `P' or `S' trap 100mm dia complete all as specified and directed.

S&F in repairs brass chromium plated jet spray with 1 m long tube for single syphonic EWC complete all as specified and directed.

S&F in repair 100 mm long aluminum anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repair 200 mm long aluminum anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repair 200mm long aluminum alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and directed.

S&F in repairs 75mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed.

S&F in repairs 100mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed.

S&F in repairs contineous (piano) hinges mild steel bright finish or electro galvanised width of flaps (when open) 40 mm complete all as specified and directed.

S&F in repair Al bihari hinges 0 crank/8 crank/16 crank of standered size and screw complete all as specified and directed.

S&F in repair 125mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repair 100mm mild steel Mortice lock, vertical type of MS 2 leavers complete all as specified and directed.

S&F in repair 50 mm mild steel Mortice lock, vertical type of MS 2 leavers complete all as specified and directed.

S&F in repair fancy type pillar tap 15mm dia cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S&F in repair waste fitting CP Brass 40mm dia for sink,basin brass chromium plated. complete all as specified and directed.

S&F in repair Toilet paper holder vitreous china box type fixed to wall with CP brass screw complete all as specified and directed.

S&F in repair plastic water closet seat black closed pattern with flat bottom cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair brass CP grating 125 mm dia with or without hole for waste pipe fixed on floor / nahani trap fixed with cement mortar complete all as specified and directed.

S&F in repairs 20mm dia brass chromium plated tubular towel rail of size 60mm long including brackets complete all as specified and directed.

S&F in repairs stainless steel brackets for towel rails complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tongue anodised with drawn steel spring fixed to door with overall length of cover plate 140mm complete all as specified and directed.

S&F in repair aluminium (extruded section body) door closer hydraulically regulated,designation No. 2, universal type, suitablefor door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed.

M&L for welding in repair exc.2.5cm but n.exc.5cm in length of metal having thickness n.exc, 6mm complete all as specified and directed.

S&F in repair 12mm thick Prelaminated particle board, interior grade, Prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work by taking out old unserviceable board complete all as specified and directed.

S&F in repair 18-19mm thick Prelaminated particle board, interior grade, Prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work by taking out old unserviceable board complete all as specified and directed.

S&F in repair plywood 4mm thick, grade BWP, type BB fixed with screw to timber frame work complete all as specified and directed.

M&L in repair 18-19 mm thick boards grade 2 quality interior grade commercial type fixed with nails to timber frame work complete all as specified and directed.

S&F in repair ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed in wooden cabinets complete all as specified and directed.

S&F in repair 50mm dia brass polished cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F in repair 100mm size hasp and staple aluminium anodised, safety type with mild steel hinge pin including bolt to hinge plate and fixed wiith screw complete all as specified and directed.

S&F in repair 20mm dia mild steel chromium plated curtain rods with fixing brackets, stops etc complete all as specified and directed.

S&F in repair 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L-type or J-type or cranked bolts and washer in roof and wall etc complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for machine cut kota stone slab flooring 15-18 mm thick in staircase riser/tread/skirting dado etc laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over & including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Granite stone 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortor (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over & including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for grinding terrazo tile/kota stone flooring/marble stone flooring complete using bees wax polish complte all as specified and directed. Note : standard size machine shall be used for griding floor and hand grinding machine be used for vertical surface ie dado/skirting etc complete all as specified and directed.

S&F in repair kitchen plate rack of size 900x750x250 mm made out of 1mm thick stainless steel sheet complete all as specified and directed.

S&F in repair night latch 75 mm 4 lever brass body complete all as specified and directed.

S&F in repair MS casement stay size 300mm with hinged joint and two plates with studs complete all as specified and directed.

S&F towel ring brass CP square/circular as per requirement complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates of size 125x60 mm including necessary fixing lugs, lock strike plate etc complete made out of 1.25 mm thick MS sheet complete all as specified and directed.

S&F in repair 20mm thick 2nd class hard wood weather boarding, clean sawn plain for resting of PVC loft tank and aluminium sheet 1mm thick all round wood complete all as specified and directed. Note: No extra cost will be given for removing the loft tank/plumbing work for replacement complete all as specified and directed.

S&F rotational moulded polythelene water storage tanks triple layered (cylindrical vertical with closed top) hoisted and fixed in position capacity 200 litres including taking out old unserviceable water tank and disconnecting and refixing all GI pipes and fittings complete all as specified and directed.

S&F in repair sand cast iron soil waste & vent pipes 75mm dia in any length with or without ears with cement joint fixed to wall complete all as specified and directed.

S&F in repair sand cast iron soil waste & vent pipes 100mm dia in any length with or without ears with cement joints fixed to wall complete all as specified and directed.

S&F in repair sand cast iron soil waste & vent pipes 75mm dia in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed.

S&F in repair sand cast iron soil waste & vent pipes 100mm dia in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed.

S&F in repair stack clamps out of 50x5 mm MS flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm dia pipe complete all as specified and directed.

All as per item ser No76.00 above but 100mm dia

S&F in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, aches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L brick work with sub class B (old size) bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed.

Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 10mm thick plaster on brick/concrete surface in CM 1:4 finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick plaster on brick walls or concrete surface in CM 1:6 surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over & including a coat of 2mm thick wall care putty (each coat of min 1mm thick) complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

S&F in repair 4 mm thick sheet glass in squares/rectangle not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal/wooden frames etc) complete all as specified and directed.

All as per item ser No 86.00 above but exc. 0.50 Sqm in each pane.

S&F in repair vitreous china white wash hand basin flat back of size 550 x 400 mm excluding CI/MS brackets with and including CP waste grating 100mm dia size, PVC waste pipe 25mm bore heavy duty, chain and porcelain stopper complete all as specified and directed.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc. overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair Stainless steel sink, 1.00mm thick for kitchen or laboratory with plug waste pipe, washers including cantilever cast iron brackets connecting union etc. overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber led joint fixed with to wall complete all as specified and directed.

S&F PVC (SWR) 110mm dia bends complete all as specified and directed.

S&F PVC(SWR) 75mm dia soil waste and rainwater drainage pipes single socketed in any length with rubber ring joint laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) 75mm dia bends complete all as specified and directed.

S&F PVC connections 15mm dia, 450mm long with PTMT nuts complete all as specified and directed.

S&F in repair flush pipe PVC for low level flushing cistern including jointing to WC complete all as specified and directed.

S&F in repair stainless steel health faucet (hand jet) 15mm bore with 1mtr tube and fitting complete all as specified and directed.

S&F in repairs chromium plated brass shower rose 125mm dia with swivel joint complete all as specified and directed.

M&L for sealing sides/edges of traps, joints, side of WC/EWC, 'P' or 'S' trap using white cement and making good complete all as specified and directed.

Removal of air lock/blockage of water in GI tubing 15mm/20mm bore cleaning the pipe or fitting etc and refixing the same in position complete all as specified and directed.

Repair to leakage in bib taps,pillar taps,stop cock, angle valve and low level flushing cistern,etc of any description by changing the washer etc complete all as specified and directed.

Easing door,window shutters of any size/any number of panels for easy closing/opening, tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed.

S&F in repairs vitreous china Urinal, Half stall type white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame)n.exc 1.5sqm and making good to distrubed surface complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame)exc 1.5sqm but n.exc 4 Sqm and making good to distrubed surface complete all as specified and directed.

M&L 2nd class hard wood plain solid straight chowkhats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides complete all as specified and directed.

S&F 35mm thick factory made, 2nd class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Part I) complete all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skelton door shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered rounded fitted with cut and mitred beads for securing glass etc sizes of member as specified in SSR Part I sec 8 clause 8.20 (a) complete all as specified and directed.

M&L for PCC type C-1 1:3:6 (20mm graded stone aggregate) as in PCC bed block complete all as specified and directed.

Dismantling cast iron work of any description complete all as specified and directed.

S&F Mild steel bands, straps, supports or stay, for rain water, ventilating pipes including bolts if reqd, hooks (stay) heavy for large gates hook and pintle large hasps and staple, chains hand made sliding bolts clamps, hold fasts wall ties etc etc hooks for hanging fans plain angle cleats for securing purlins to wood truss or rafter, knee piece inserts, two way and three way straps, plate washer and similar small articles confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

M&L in repairs aluminium sheeting 0.71 mm thick fixed to wooden shutters with CP screw including cutting to required size etc complete all as specified and directed.

M&L for preparation new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F factory made solid PVC door frame size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing shown in SSR Part I complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm the style consisting of frame made out of MS tube, for top & bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, bottom rail & lock rail on either side & as gap insert for top rail and bottom rail. panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement as per specification and drawing shown in SSR Part I complete all as specified and directed.

S&F 100 MM butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed,type B-21 complete all as specified and directed.

S&F 150 mm long aluminum anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 250mm long aluminum alloy anodised sliding door bolt (bolt type) including fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and directed.

S&F 150mm size aluminum handles cast type, anodised complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Ist class quality non skid ceramic coloured tiles 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exc.0.18sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over & including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for Ist class quality non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exc.0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over & including 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for Ist class quality Glazed ceramic tiles in vertical surface 300 X 200 X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over & including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings etc not exc 15 cm thick above or below ground level complete all as specified and directed.

M&L for prepolished machine pressed coloured chequred cement concrete tiles 300X300X25 mm pointed in grey cement and pigment to match the shade of tile laid over and including screed bed 20 mm thick in cement mortar 1:6 complete all as specified and directed.

M&L for dholpur stone with hammer dressed facework (with maximum depression from a straight edge held against the dressed surface not exc.20mm),about 40mm high, 75mm deep in straight courses,laid and jointed in cement and stone dust mortar 1:3,resess pointed (10mmX20mm) with and admixture of white cement and dholpur stone dust 1:1 complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (40mm graded stone aggregate) as in foundations, filling and mass concrete/Subbase complete all as specified and directed.

M&L for preparation of old plastered or un-plastred surfaces of walls by brooming down or steel wire brushing scrapping down smokes soot mouls, Moss and efflorescent salt and trading oil and greasing spots and applying one coat of white wash on wall complete all as specified and directed.

All as per item ser No 130.00 above but on ceiling

M&L for preparation of old plastered or unplastered surfaces of walls, treading oild and greasy spots, moss and efflorescent salts and applying one coat of oild bound distemper complete all as specified and directed.

All as per item No 132.00 above but two coats

M&L for applying one coat of synthetic enamel paint over old painted steel surfaces of any descripition over 10cm width or girth including preparation of surfaces complete all as specified and directed.

All as per item No 134.00 above but on wooden surfaces.

M&L for complete removal of the existing treatment from walls surfaces and applying two coats of oil bound distemper over & including 2mm thick wall care putty ( each coat min 1 mm thick ) complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelersm apexstone, bed plates, including weathering, slightly rounded or chamfered angles throating and grouting to make a uniform slope where depression and weathering including mixing water proofing compound at the rate 3% by weight of cement finishing even and smooth using extra cement complete all as specified and directed. Note : WPC shall be measured & paid separately.

M&L for Reinforced cement concrete (nominal mix) type B1 1:2:4 (12.5mm graded stone aggregate) as in slabs supported on wall, beam and column in floors,roofs, landing, balconies, canopies, deck slabs and in shelves and the like mixed with WPC @3% by wt. of cement finishing even and smooth without using extra cement complete all as specified and directed.

M&L TMT bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste of form work for flat rough finished surfaces to soffits of suspended slab such as roof slabs, floor slabs landing and similar work not exc. 200mm thick (horizontal or sloping) complete all as specified and directed.

M&L wire brushing and cleaning top surface of tiles lime terracing or cement concrete including flashing and junction of parapets etc and surface painting with a layer of blown bitumen of any penetration applied hot @ 1.7 kg/sqm blinded with grit or pea size graval @ 0.006 cum per sqm and lightly tampered complete all as specified and directed.

Taking down shutter of any description exc 1 sqm and not exc. 2 sqm each complete all as specified and directed.

S & F pressed steel frames for doors with one or more rebates of size 105x60 mm including necessary fixing lugs, lock strike plate etc complete made out of 1.25 mm thick MS sheet complete all as specified and directed.

S&F in repair 100mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed.

S&F 150 mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

M&L fully vitrified tiles light shade 9 mm to 10 mm thick (square/rectangular) polished,area of each tiles exc 0.16 sqm but n.exc 0.36 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F in repair PVC waste pipe 32mm dia complete all as specified and directed.

S&F in repair PVC syphone with handle complete for low level flushing cistern complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple etc in wooden/steel frames complete all as specified and directed.

S&F in repair bathroom cabinet with mirror made out of PVC moulded body and frame with shutter of size 20"X16" complete all as specified and directed.

S&F in repair two way angle cock chromium plated for fixing with flushing cistern/jet spary/health faucent, etc complete all as specified and directed.

Complete removal of existing roof treatment in up to depth of original roof slab and removing entire rubbish off the premises, and applying Water proofing treatmnet as under:- (a) Rendering 10mm thick in CM(1:4) mixed with water proofing compound @3% by weight of cement. (b) Applying a coat of approved bituminious primer @0.25 ltr/Sqm and allow to dry. (c) Applying one coat of hot blown bitumen grade 85/[email protected]/Sqm. (d) Supplying and laying polymeric water proofing membrane of weight not less than 3Kg/Sqm (e) Applying a coats of solar reflective bituminious aluminium paint @0.15 kg/sqm over the memberane complete all as specified and directed. Note: WPC shall be measured and paid seperately.

S&F in repairs GI Tank Connector 20 mm dia complete all as specified and directed

S&F in repairs of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors of dia 25 mm complete all as specified and directed.

All as per item ser No. 154.00 above but 16 mm dia.

S&F in repair Ball brass valves 15 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repair Ball brass valves 20 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

M&L for clearing away all grass, cleaninig/brooming to terrace floor, vegetation, saplings, shrubs, brushwood, undergrowth, digging out roots, filling holes and levelling ground area exc 1 Sqm but n exc 2 Sqm Each, and removing rubbish outside the MoD periphery of the area under clearance complete all as specified and directed. Notes :-(a) The cleaning of grass/vegitable/brushed growing to be cleaned upto 6 (Six) storey and making good with PCC 1:2:4 type B1 and finishing the surface to match the exisitng surface complete all as spceified and directed by Engr-in-Change(b) Rate also includes necessary scaffolding, tools & plants to carry out the job upto a height G+6 floor. The rate includes necessary cleaning of floor/tiles, doors/window incldung glass panes after complete of painting (b) Rate also includes necessary scaffolding, tools & plants to carry out the work/job upto a height G+6 floor.

Taking down of Old unserviceable point wiring any type for light, fan, power etc including unserviceable switch,socket, regulator light fitting and ceiling rose etc of any make complete including making good disturbed surfaces of walls ,floors roof etc complete all as specified and directed.

Taking down of Celling Fan carefully and refixing the same after Painting with synthetic enamel white paint by spraying writing MES No with synthetic enamel paint in black tint greasing,minor repairing on the completion of the work complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm multistranded copper conductor cable multistranded, FRLSH PVC insulated and unsheathed in and including 19/20 mm dia PVC concealed connduit including cutting chasing for conduits and terminal boxes with all fittings /accessories and including 1.5 Sqmm PVC insulated copper conductor earth wire connected common earth with terminal boxes for Modular fittings including acessories as modular GI flush box 2mm thick surface cover plate with frame, for one light/Fan/Exhaust Fan/bell point complete all as specified and directed.

All as per item ser No 161.00 above but using cable size 1.5 Sqmm for 1 No 05 Amps Socket outlet independent with terminal boxes, Moduler fittings including acessories as modular GI flush box 2mm thick ,surface cover plate with frame, metal flush box.

All as per item ser No 161.00 above but using cable size 1.5 Sqmm for 05 Amps Socket outlet independent but below the switch board with terminal boxes, modular fittings including acessories as moduler surface cover plate with frame, metal flush box.

All as per item ser No 161.00 above but using cable size 1.5 Sqmm for 1 No 05 Amps Socket outlet on the same board with other switches.

All as per item ser No 161.00 above but using cable size 2.5 Sqmm for 15 Amps Socket outlet terminal boxes for Modular switches including acessories as modular GI flush box 2mm thick ,surface cover plate with frame, metal flush box with 2.5 sqmm earth wire.

M&L for Point wiring with 1.5 Sqmm multistranded copper conductor cable multistranded, FRLSH PVC insulated and unsheathed in & including PVC casing & caping double lock including fixtures and terminal boxes with all fittings /accessories and including 1.5 Sqmm PVC insulated copper earth wire connected common earth with terminal boxes for Modular fittings including acessories as modular surface cover plate with frame, for one light/Fan/Exhaust Fan/bell point complete all as specified and directed.

All as per item ser No 166.00 above but using cable size 1.5 Sqmm for 1 No 05 Amps Socket outlet independent with terminal boxes, Moduler fittings including acessories as modular surface cover plate with frame, GI flush box.

All as per item ser No 166.00 above but using cable size 2.5 Sqmm for 15 Amps Socket outlet terminal boxes for Modular switches including acessories as modular surface cover plate with frame, GI flush box with 2.5 sqmm earth wire.

M&L for Point wiring with 1.5 Sqmm multistranded copper conductor cable multistranded, FRLSH PVC insulated and unsheathed in existing PVC counduit including fixures and terminal boxes with all fittings /accessories and including 1.5 Sqmm PVC insulated copper earth wire connected common earth with terminal boxes for Modular fittings including acessories as modular surface cover plate with frame, for one light/Fan/Exhaust Fan/bell point complete all as specified and directed.

All as per item ser No 169.00 above but using cable size 1.5 Sqmm for 1 No 05 Amps Socket outlet independent with terminal boxes, Moduler fittings including acessories as modular surface cover plate with frame, metal flush box.

All as per item ser No 169.00 above but using cable size 2.5 Sqmm for 15 Amps Socket outlet terminal boxes for Modular switches including acessories as modular surface cover plate with frame, metal flush box with 2.5 sqmm earth wire.

S&F in replacement of plug Plug Top 16 Amps with Indicator complete all as specified and directed.

S&F modular switch 6 Amp single pole one way-1 module complete all as specified and directed.

S&F modular switch 20 Amp single pole one way-2 module complete all as specified and directed.

S&F modular socket outlet shuttered-6A-2/3Pin-universal Indian 2 Module complete all as specified and directed.

S&F modular socket outlet shuttered-6/16A-2/3Pin Indian 2 Module complete all as specified and directed.

S&F Fan step regulator 120W - 2 module complete all as specified and directed.

M&L for Modular Bell push 6 Amp 2 Module complete all as specified and directed.

M&L in replacement of Bell ding dong AC 230Volts complete all as specified and directed.

S&F in replacement of switch piano type flush type single pole one way 5 Amps complete all as specified and directed.

S&F in replacement of socket outlet 2 in one 3 Pin 5 Amps complete all as specified and directed.

S&F in replacement of switch piano type flush type single pole one way 15 Amps complete all as specified and directed.

S&F in replacement of socket outlet 2 in one 3 Pin 5 & 15 Amps complete all as specified and directed.

S&F in replacenent of PVC connection 600mm long with brass Nut with rubber washer suitable for hot/cold water complete all as specified and directed.

S&F in replacement of modular cover plate with frame 3 module complete all as specified and directed.

S&F in replacement of modular cover plate with frame 6 module complete all as specified and directed.

S&F in replacement LED 18/20 Watt fitting batten with decorative end cap complete with aluminium housing & integral electronic driver with tube 18/20 watt complete incl connection with 1.5 Sqmm 2 core flexible copper conductor cable complete all as specified and directed.

S&F in replacement of capacitor 2.5 Mfd including connection complete all as specified and directed.

S&F in replacement of exhaust fan PVC body 250mm dia having 05 Blade including connection and fixing on wall with nuts bolts washers etc complete all as specified and directed. Note - Old unserviceable exhaust fan shall be deposited to MES Store.

S&F lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F ceiling rose 3 phase/PVC/polycarbonate, isolated body complete all as specified and directed.

M&L for sub main wiring 2x4.0 sqmm and 1x4 Sqmm earth wire PVC insulated FRLSH multistranded copper conductor ISI marked 1100 V grade in PVC in existing concealed conduit or fixed in wall/floor,passing through wall/ceiling including taking out old unserviceable complete all as specified and directed. Note - 3 run of 4 Sqmm cable shall be measured as one unit (RM)

M&L for sub main wiring 2x10 sqmm and 1x10 Sqmm earth wire PVC insulated FRLSH multistranded copper conductor ISI marked 1100 V grade in existing PVC conduit fixed in wall/floor,passing through wall/ceiling including taking out old unserviceable complete all as specified and directed. Note - 3 run of 6 Sqmm cable shall be measured as one unit (RM)

S&F in replacement of heating element 1.5 KW triangular type for 25Ltr hot water heater complete including connection complete all as specified and directed.

S&F in replacement of heating element 2.00 KW for 50Ltr hot water heater complete including connection complete all as specified and directed.

S&F in replacement of inlet/outlet assembly to matching the existing 25/50 Ltr capacity geyser inclding fixing and testing complete all as specified and directed.

S&F in replacement of copper water tank suitable for 25 Ltr geyser including proper fixing and testing after repair complete all as specified and directed.

S&F in replacement of geyser 25 ltr including fixing on wall complete all as specified and directed. Note - Old unserviceable geyser shall be deposited to MES Store.

S&F in replacement of Ceiling fan 1200 mm sweep three blade white colour including all fixing material and testing complete all as specified and taking down old unservisable Ceiling fan and deposited in MES store yard complete all as specified and directed.

S&F in replacement of exhaust fan PVC body 200 mm dia having 05 Blade including connection and fixing on wall with nuts bolts washers etc complete all as specified and directed. Note - Old unserviceable exhaust fan shall be deposited to MES Store.

V.V CONSTRUCTIONS

M/S SS ENTERPRISES

DR Buildcon