CONST. OF DIVISIONAL OFFICE COMPLEX (REGIONAL OFFICE,LIBRARY,BOYS AND GIRLS HOSTEL,DINING) FOR CHATRAPATI SHAHU MAHARAJ RESEARCH, TRAINING AND HUMAN DEVELOPMENT INSTITUTE (SAARTHI) AT AMRAVATI

Amount

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from1.50 m to 3 m ) By Mechanical Means

Excavation for foundation in Hard murum and boulders including removing the excavated material upto a distance of 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m to 3.0 m.) By Mechanical Means

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means

Excavating the ground to a required depth of 30 cms removing and conveying unwanted stuff,rubbish, to the required distance as directed.Filling fresh garden soil and manure in excavated area in 3:1 proportion to a required height to 30cms.Mixing garden soil & manure thoroughly well,,levelling, watering on previous night.Planting well rooted shrubs 0.5 m apart as directed and Maintaing till well established by watering,weeding,stirring,replacing of casualties etc complete.

Digging pit with size 0.9 mx 0.9 m x 0.9 m removing and conveying unwanted stuff to a required distance as directed.Filling the pit with approved excavated material upto a height of 30 cms and remaining height of 0.6 m with fresh garden soil & manure in 3:1 proportion.Mixing soil & manure thoroughly well.levelling as directed.Watering previous night,planting one or two year old healthy trees saplings of 1 to 2 m height as per specifications. Maintaining till well established by watering, weeding,stirring of soil,replacing casualties etc complete.

Conveying materials obtained from excavation upto a lead of 3 km including all leads,lifts,royalty etc complete

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with concrete Batch mix plant (Pan mixer) etc. complete. With 70% natural sand and 30% VSI grade.

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying in situ cement concrete M-20 of trap metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer etc. complete. With 70% natural sand and 30% VSI grade crushed sand

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with concrete Batch mix plant (Pan mixer) etc. complete. With 70% natural sand and 30% VSI grade.GF

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)GF

Providing and laying Cast in situ cement concrete M-20 of trap metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer etc. complete. With 70% natural sand and 30% VSI grade crushed sand GF

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLCconcrete Batch mix plant (Pan mixer) etc. complete. With 70% natural sand and 30% VSI grade. GF

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) GF

Providing and laying Cast in situ cement concrete M-20 of trap metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer etc. complete. With 70% natural sand and 30% VSI grade crushed sand GF

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completeGF

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per One Square Metre of vertical surface area covering 10 years guarantee on bond paper.

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete.

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per One Square Metre of surface area covering ten years guarantee on bond paper

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with concrete Batch mix plant (Pan mixer) etc. complete. With 70% natural sand and 30% VSI grade.GF

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)GF

Providing and laying Cast in situ cement concrete M-20 of trap metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer etc. complete. With 70% natural sand and 30% VSI grade crushed sand GF

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap metal for R.C.C. arches with skew backs as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block). Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With 70% natural sand and 30% VSI grade crushed sand 1F

Providing and laying Cast in situ/Ready Mixcement concrete M-30 of trap metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with concrete Batch mix plant (Pan mixer) etc. complete. With 70% natural sand and 30% VSI grade. GF

Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With 70% natural sand and 30% VSI grade. GF

Providing and laying Cast in situ cement concrete M-20 of trap metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic reversible Drum Type mixer etc. complete. With 70% natural sand and 30% VSI grade crushed sand

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with concrete Batch mix plant (Pan mixer) etc. complete. With 70% natural sand and 30% VSI grade. GF

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With 70% natural sand and 30% VSI grade.

Providing and laying Cast in situ cement concrete in M-20 of trap metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel)with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer etc. complete. With 70% natural sand and 30% VSI grade crushed sand

Providing and laying Cast in situ/Ready Mix cement concrete in M-30 of trap metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with concrete Batch mix plant (Pan mixer) etc. complete. With 70% natural sand and 30% VSI grade.GF

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With 70% natural sand and 30% VSI grade. GF

Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With 70% natural sand and 30% VSI grade.GF

Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete.GF

Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete.

Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete.GF

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) GF

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) GF

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. GF

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. GF

Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. GF

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. GF

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc complete.

Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge etc. complete.

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. GF

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. GF

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. GF

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. GF

Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. GF

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. GF

Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. GF

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.GF

Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete.GF

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.GF

Providing, laying and fixing exterior grade fibrilling fibre reinforcement heavy duty designer cement concrete tiles for Flooring of approved colour and design 22 +/ -2 mm thick bayer colour pigmented as per IS ..1237 - 1980 having compressive strength more than 500 Kilogram/sq.cm reaffirmed in 2006 ,having wert transvrse strenghth of 3.5 / mm 2, water absorption less than 10 % abrasion / wear resistance less than 2 mm ,skid resistance more than 25.0 (ASTM:E303) and no fading as per DIN - 51094 of size 300 x 300 in plan / designed pattern on a bed of 1:4 cement mortar including cement float ,filling joints with neat cement slurry ,curing, polishing and cleaning etc. complete. For flooring. GF

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.GF

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish ,GF

Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. a) One side polish FF

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete. One side polish ,FF

Providing and Fixing of Mineral Fibre Suspended Ceiling System with Bioguard (Bevelled Tegular) EDGE TILES WITH 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 90%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0/Class 1 (BS 476 Part 6 and 7), in module size of 600x600 x 16mm with Anti Microbial coating on the face of the tile, suitable for Green Building application, with Recycled content of 34%. The tile shall be laid on precoated G.I. channel on XL2 Clip having a web height of 32 mm 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner and 1200 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7.7 Kilograms/M2 and pull out strength of 100Kilograms. . The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile and Grid system used together should carry a 10 year warranty. products approved at GRIHA and BS 476 etc. complete.GF

Providing and fixing 15 mm thick eco-friendly densified edge calcium silicate false ceiling of approved texture of size 595mm x 595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 gm/sq.m including both sides) consisting of main T runner suitably spaced at joints to get required length and size 24X38mm. made from 0.33mm thick(minimum ) sheet, spaced 1200mm center to center and cross T of size 24X28mm made of 0.33mm thick(minimum ) sheet to be interlocked at the middle of the 1200x600 mm panel to form the grid of size 600x600mm resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick (minimum) sheet with the help of all plugs at 450mm and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (spintone/cosmos/hexa) in the grid, including light fittings , fixtures , smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel levels clips of size 85x30x0.8mm, spaced at 1200mm center to center along main T bottom exposed with 24mm of all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc. complete.(currently this item should be used only for VIP cabins)

ACOUSTICAL WALL PANELLING – FABRIC WRAPPED OF SIZE: 600X600/1200X25MM Providing and Fixing of Acoustical Wall Panel with square edges made of fibre glass substrate 25mm thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as per ASTM E-84. The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal) or 600x1200mm (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM C423 to be fixed to wall on a framework of wooden battens and using Wall panel Impalers (supplied by the manufacturer) or by using construction adhesives (as per the instructions laid down by the manufacturer). The fibre glass substrate shall have a recycle content of 85%. Installation:An appropriate vapour barrier (by others) shall be applied/installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer’s recommendation. Install wooden batten grid (provided by others) of section 50x50mm or as approved by the Architect on the solid wall/partition to provide level and plumb surface. The Impalers shall be fixed to the battens using self-tapping screws, 3 nos. in case of 600x600mm and 4 nos. in case of 600x1200mm. Silica based construction adhesive (by others) to be dabbed on to the projecting elements (spikes) of the Impalers. Wall Panels shall be pierced through the spikes of the Impalers ensuring the line and level of the panels are maintained

Providing and fixing 3.5 to 4 mm thick Veneer finish wall Panaling made out of 50 x 25 mm (finished size) C.C.T.W. frame work or size of 600 x 600 mm center or as per site condition covered by 6 mm thick marine plywood of the generally confiriming to I:S 710-1980 finished with 3.5 to 4 mm thick matching Veneer of approved color and in satin wallnut groov matched veneer pattern and design including melamine polishing & design with antitermite treatment etc. to plywood and woodwork with ten years guarantee bond etc. including all lead and lifts complete as per Architects Drawing and instructions of Engineer Incharge.

Finishing the terrece slab integrally mixed with water proofing compound in C.M. 1:3 with 12 mm thick layer including curing, finishing,using waterproofing compound as approved by Engineer-in-charge at the rate of 1 kg per bag of cement etc. complete. GF

Providing and fixing M.S. grill door 24 Kilogram/ One Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc GF

Providing and fixing four fold partly panelled partly glazed door with fan light of required sized as per detail drawing with Indian superior teak wood frame of size 150 mm x 100 mm, Indian superior teak wood shutter 35 mm thick consisting of styles 125 mm x 35 mm., frienge rail 125 mm x 35 mm., Lock rail of 150 mmx 35 mm and bottom rail 250 mm x 35 mm including 35 mm thick Indian superior teak wood carved panels, 6 mm thick eitched float glass with stainless steel grill (15 Kg /Sq.m.) including necessary brass fixtures and fastenings including finishing with two coats of melamine polish etc. complete.

Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing including the CCTW door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete

Solid Core Flush door Double leaf with ventilator Providing and fixing factory made solid core flush door shutters in double leaves 35mm thick,decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing with french polishing etc. (including CCTW door frame)(Sample to be got approved from Ex. Engineer before use) Commercial Hard Wood shutter

Solid Core Flush door Single leaf with ventilator Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved face mica 1 mm thick on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (with CCTW door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm .

Providing and Fixing 32 mm thick One piece single moulded puff ABSTRONE BUTADYNE STYRINE (ABS) Door shutter for internal use including toilets made up of outer ABS sheet of 1.2 mm thick having puff insulation of 35 to 40 Kilogram/One Cubic Metredensity and 10 mm dia.for steel bars 2 Nos., wooden block to receive fixtures, having S.S. hinges 100 mm length, S.S. handles 150 mm length and 10 mm dia sliding door bolt etc. complete

Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing including the CCTW door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete

Providing and fixing factory made solid core flush door shutters in single leaves 35mm thick,decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing with french polishing etc. (Excluding door frame)(Sample to be got approved from Ex. Engineer before use) Commercial Hard Wood shutter including pressed steel door box frame of M.S. sheet made of 18 guage t

Sliding Window-3 Track (2 Glass shutter + 1 flymesh)of approved make with DGU, providing and fixing of Sliding Window - 3 Track (2 Glass shutte r+ 1fly mesh).For details refer to Specifications. As directed by Engineer in charge.

Providing and fixing in position colour Anodized Alluminium partly fixed partly louvered windows/ ventilator of various size as per detail drawings and specifications including alluminium frames 80 x 38 mm box type 5 mm. thick sheet glass louvers, clips / rubber plain P.V.C. gaskets of approved quality etc. complete. [Sample to be got approved from Executive Engineer before use.]

Providing and fixing in position colour Anodized Alluminium partly fixed partly louvered windows/ ventilator of various size as per detail drawings and specifications including alluminium frames 80 x 38 mm box type 5 mm. thick sheet glass louvers, clips / rubber plain P.V.C. gaskets of approved quality etc. complete. [Sample to be got approved from Executive Engineer before use.]

Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising without box

Providing and fixing of factory made uPVC Sliding window & door (White Colour) complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (+-0.2 mm), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m22 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 (b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS : 476 - Part 7 Classification 1 8 Ignitability Evaluation BS : 476 - Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa

Providing and fixing mild steel grill work for windows, ventilators etc. 25 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.GF

Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use) (railing height 900 mm) GF

Providing and fixing mild steel grill gate with angle iron frame 65 mm x 65 mm x 10 mm with iron bars at 150 mm C/C and diagonal flats as per the detailed drawing including hinges, pivot blocks locking arrangement welding, revetting with oil painting in three coats of approved colour shade. (Weight of gate 35 kg/Sq.m.)

Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.GF

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete GF

Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete.GF

Providing and applying a base coat comprising of 1 Kg Polydee-MC and 1 Kg fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete.

Providing and applying two coat of Polymer based external weather proof & dust proof paint of standard manufacture like Apex Ultima from Asian paints, weathershield from Dulux of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surfaceetc. for specified buildings complete.(including primer coat ) GF

Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applyingwall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity.GF

Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in two coats including scaffolding, preparing the surface. (including primer coat) etc. complete.

Providing and applying top coat exterior paint to terrace of approved make, shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by throughly cleaning of oil, grease, dirt and other material and fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) preparing as required, etc. complete.GF

Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall without flushing cistern with flush cock and with water Jet and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use)

Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc complete

Providing and fixing 15 mm diameter PVC Aqua kraft type of approved make super right angle stop tap with flange including all accessories etc complete

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete.

Providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 mm thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etc complete. (Counter size 1.20 m x 0.60 m )

Providing and fixing coloured glazed earthenware Wash Hand Basin of 55cm x 40 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.

Providing and fixing 10 cm PVC nahani trap with grating etc. complete.

Providing and fixing white glazed earthenware lipped flat back/corner type Urinal with PVC 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall.

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.A) 20 mm diameter,GF

B)25 mm diameterGF

C)32 mm diameter GF

D) 40 mm diameter GF

E)50mm diameter GF

Providing and laying in trenches 50mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete.

Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete.

Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete

Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete

Providing and fixing 100 mm dia. chromium plated brass showers rose to 15mm dia. supply pipe including necessary bend and socket complete.

Providing and fixing UPVC SOIL / VENT / WASTE SWR pipe of 75 mm diameter conforming to I.S.-13592, and I.S.-4985 to withstand continous internal hydroulic pressure of 4 kg/cm2 including necessary fixtures and fittings, such as bends, tees, single junctions, double junctions and joining with rubber rings and lubricants, on wall by means of clips or in ground including necessary excavation, laying refilling, trench testing etc. complete. GF

Providing and fixing UPVC SOIL / VENT / WASTE SWR pipe of 110 mm diameter conforming to I.S.-13592, and I.S.-4985 to withstand continous internal hydroulic pressure of 4 kg/cm2 including necessary fixtures and fittings, such as bends, tees, single junctions, double junctions and joining with rubber rings and lubricants, on wall by means of clips or in ground including necessary excavation, laying refilling, trench testing etc. complete. GF

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.GF

Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 Kilogram with frame etc complete.

Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 Kilogram with frame etc complete.

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete

Providing and fixing 50mm diameter water meter with non-return valve including strainer,sockets/ union nut and including water meter box making locking arrangement and lock. [without chamber]

Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally /square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete.with Crushed sand VSI Grade

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.GF

Providing and fixing C.P.soap dish (polyurethane) jaquar make continental (Cat. No. AQN 7733 ) including all labour and material as directed by E-I-C

Providing and fixing C.P. Toilet rack 24"with lower hanger jaquar make continental (Cat. No. ACN 1181N) including all labour and material as directed by E-I-C

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm in length including all accessories complete.

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters

Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats.

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete.

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre)

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre)

Providing and installing bio digester unit based on DRDO technology made of fibre reinforced plastic (FRP) having composition and following technical specifications and including necessary pipe and accessories up to 3 meter length, excluding the necessary excavation for installing the bio digester. Percentage of fibre glass (glass content in fibre glass should be minimum 30%): -33.33% Percentage of polyester resin: - 66.67% Water absorption (as per ASTM):-0.30% Flammability as per ASTM Tensile strength:-115 MPA Specific Gravity at 25 degree centigrade 1.45 Izod impact strength:-65KJ/M2 Heat defection/distort temperature:-65deg C Corrosion resistance (Non Corrosive) fitted with Inlet pipe size rigid PVC: -100mm Outlet pipe size rigid PVC:-80mm Gas outlet rigid PVC with Valve: 20mm Bacteria immobilization PVC mattes (on all partition) With DRDO TOT licensee and latest batch certificate(month & year of supply) and capacity as below l) Up to 500 user size (6mx2.0mx1.6m), Capacity of Biodigester:-20000 liters, Area of top, bottom and side walls: - 50.72 sq.m, Area of partition walls: 13.36sq.m, Total weight of FRP: - 917.86 Kilogram, Bacteria inoculums quantity: - 7000 liters, Minimum thickness of side walls / top and bottom: 9 mm, One Number of inside partitions: - 4, Minimum thickness of partition wall: 4mm

Providing and installing bio digester unit based on DRDO technology made of fibre reinforced plastic (FRP) having composition and following technical specifications and including necessary pipe and accessories up to 3 meter length, excluding the necessary excavation for installing the bio digester. Percentage of fibre glass (glass content in fibre glass should be minimum 30%): -33.33% Percentage of polyester resin: - 66.67% Water absorption (as per ASTM):-0.30% Flammability as per ASTM Tensile strength:-115 MPA Specific Gravity at 25 degree centigrade 1.45 Izod impact strength:-65KJ/M2 Heat defection/distort temperature:-65deg C Corrosion resistance (Non Corrosive) fitted with Inlet pipe size rigid PVC: -100mm Outlet pipe size rigid PVC:-80mm Gas outlet rigid PVC with Valve: 20mm Bacteria immobilization PVC mattes (on all partition) With DRDO TOT licensee and latest batch certificate(month & year of supply) and capacity as below e) Up to 60 user size (2.4mx1.25mx1m), Capacity of Biodigester:-3000 liters, Area of top, bottom and side walls: - 13.30 sq.m, Area of partition walls: 3.75sq.m, Total weight of FRP: - 139.95 Kilogram, Bacteria inoculums quantity: - 1000 liters, Minimum thickness of side walls / top and bottom: 5mm, One Number of inside partitions: - 3, Minimum thickness of partition wall: 3mm

Supplying and providing various materials for REED BED filter media of 1 meter depth comprising of 300 mm thick brick bats at bottom,60 mm/40 mm gravel 150 mm thick over it,20 mm gravel 100 mm thick,Natural sand 100 mm thick,activated charcoal 60/40mm 50 kg 175 mm thick, 50 kg of coco pit in powder form 175 mm thick and 5 nos aquatic plants at top.The rate is exclusive of cost of tank but inclusive of fixing non return valve including all materials labour etc.

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete.GF

Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 mm dia G.I. pipe ( Rezan/ concertina coil 0.75 mm dia ) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete.

Supply and Installation of translucent roof with DPI Flux standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 12 mm thick of 900 mm (min.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility & strength. Panels with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 One Numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineering in charge. Colour: As per Approval. Approved Make: FLUX by DPI Daylighting or approved equivalent The 12mm thick panels shall be used for a roofing height of upto 15 mtrs. 4F

RWH - Recharge Pit Providing and constructing recharge pit of 2.0m deep and 1.0m dia of pre-cast RCC rings with 6.5" dia x 25m deep borewell at the floor of recharge pit including installation of combination of solid/perforated PVC casing pipe wrapped around with netlon mesh including 300mm thick sidefilling around outside of RCC rings (annular space) with 40mm size boulders including filling of recharge pit up to 0.5m depth with 25-75mm clean washed gravels from bottom up followed by 0.5m depth of 10- 25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs, PVC end?caps, fittings etc. including arrangement for inlet & outlet pipe excavation & backfilling as shown in the drawing.The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge.

Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete

Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete

Providing and applying a base coat comprising of 1KilogramPolydee-MC and 1Kilogramfresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete.

Providing and Fixing of Mineral Fibre Board Acoustical Suspended Ceiling System with ultima (Bevelled Tegular) Edge Tiles of size 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 20mm , suitable for Green Building application, with Recycled content of 32%. The tile shall be laid on precoated G.I.channel on XL2 Clip having a web height of 32 mm with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7.7 Kilograms/M2 and minimum pull out strength of 100 Kilograms.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete.

ACOUSTICAL WOODWOOL WALL PANELLING: Providing & fixing of 100% Natural Material- Magnesite (Hygroscopic & biologically sound binding agent) bonded woodwool Heradesign planks of 600Mm*1200Mm *25Mm thickness made out of wood wool fibre of width 1Mm Fiber thickness mixed with Natural water & Magnesite (No-Cement) with open & smooth surface texture, Weight of panel to be 11.3 Kg/m2. A Completly harmless Envirenment & Human Friendly & also a disposable or recyclable Material & can last for more than 80 Years in building interiors As it has long lifespan & suitable for Indoor conditions with relative air humidity of upto 90%. Magnesite protects the wood cells against ageing & fungal attack. To achive upto NRC=1.00 it should be a clear gap of 200Mm from wall slab along with the backing of Mineral wool of 50mm thick with 64 kg/m3 density. Ecologically Sound Material with high mechanical strength with Crash test of 90Km/H with Ball Impact Test DIN18032 & EN13964 with flying colors & A sustainable material (PEFC & FSC Certified) along with EPD Certified Acc. to EN ISO 14025 (AUB-Envirenmental Product declaration). Manufacturing tolerance for nominal size: Length, Width & Thickness ± 1 mm, & In a Standard Climate of 23° C and 50% rel. humidity. FIXING & SUBSTRUCTURE: Impact Resitant According to DIN-18023 or EN13964 to be Fixed on CD Sections Profile framework with Screw 9Pc/Panel & Centre Distance Support of 300Mm & Centre distance of Cross Profile would be at 600Mm & Main Profile at 900Mm CD Profile is made out of GI( Sections Profile 60/27/0.6Mm-0.6MmThick x 60Mm Width x 0.27Mm height). The Main Profile is in the legth of 3000Mm & to form a section of 600mm x 1200mm. Heradesign Superfine panels to be fixed on the wall with a minimum of 200Mm void or gap with Galvanized screws of length 50Mm & Dia 4.5Mm with a backing of Mineral Wool of density 64kg/m3 density (50mm thick).Colour Of Panels : NATURAL BEIGE, Can be Painted to the desired colour (Any- RAL, NCS or StoColor Shades) using water based color by Spray method prior to installation. FIRE CLASS as per EN 13501-1:B –s1, d0. Test Certificates to be submitted.

Providing & Fixing in position, Carpet more than 800+ gsm, made with100% stain proof fibres of approved make along with 5mm underlay as per Architectural & Acoustical Design & Instructions & Complete in all aspects including all materials labour,finishing etc complete

Providing and fixing 90 cm x 60 cm Granite plate engraving 10 cm. Height letter, figures including painting the lefters/figures with approved colour and shade complete

Providing & Fixing mat finish stainless steel lettering of various heights as directed by Engineer in-charge including material, labour, cleaning etc. complete. A) For single letter like A, B, C etc. in english and 1) Upto height of 30 cm.

2) From 30 to 45 cm. height

B) For half letters 1) Upto height of 30 cm

2) From 30 to 45 cm height

Directional signage Design, supply, fabrication and fixing acrylic multilingual Braille (raised dots) directional signboards of size 6" x 9" designed as per accessibility standards and having 4mm thick acrylic base plate with Upper Case San Serif words made of white acrylic non glare cut out letters of height 15mm raised not less than 0.8mm above base plate and the equivalent word written in Hindi with Devnagri non glare acrylic letters of height 15mm raised not less than 0.8mm above base plate and having a non glare acrylic cut arrow pointing in the required direction. Each signboard to be fixed as per manufacturers specifications on the wall at the approved location and at a height of 1200mm from FFL and as per the directions by the engineer in charge.

Acrylic tactile audio map Design, supply, fabrication and fixing of acrylic, non glare, tactile audio pictorial building layout as per the approved size, design and make, having 6mm thick acrylic non glare base plate of the approved colour and non glare acrylic cut out symbols and upper case Sans Serif letters of 12mm height, raised 3mm above base plate and Grade 2/ Grade 1 Braille to be integral with the sign face and be raised 0.5mm above base plate. The map to be installed at the specified location as per accessibility standards, shall be oriented to the position of the viewer and to be installed at a height of 800 mm from the finished ground/ floor level and using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge

Providing and fixing SS Braille buttons in the elevator of the approved brand and make to be installed using the specified adhesive and as per the instructions given by the manufacturer

Providing and laying in place 300mm x 300mm x 9.8mm vitrified tactile warning and directional tiles of the approved brand, make and colour inside the buildings at in all corridors and lobbies, level differences etc. as per accessibility standards and as per the installation instructions prescribed by the manufacturer including zarri making wherever required and finishing including grouting the joints with white cement with matching pigments etc. up to the satisfaction of the engineer in charge complete.GF

Providing a folding wheelchair of Pioneer Surgicals Brand, model One Number PS 809/ equivalent make as per the directions of the engineer in charge.

Fire exit and floor identification signage as per manufacturer's specifications, ADA compliant and modular system

Providing and fixing Braille indicators for handrails of the approved design and make having Braille dots raised 0.5mm above base plate, to be installed at the specified locations as per the directions of the engineer in charge

Kitchen Trolley Providing and Fixing stainless steel kitchen trolley of overall 26 " height and 22" depth,supported on aluminium pipes ,trolley basket made out of 5 mm stainless steel rod fitted on telescopic channel of size 1.5 " x 20 " x 22 " on both sides of trolley of 12 " or above size, panel having 40Kilogramload bearing capacity of trolley made out of 20 mm PUC coated plywood and colour combination as directed by E-I-C.Inner side of panel covered by white mica ,100 mm s.s. decorative handle.(The width and height of individual compartments shall be kept as directed by Engineer-in-charge)

Providing granular sub-base (drainage layer) by coarse graded materials, confirming to grading-II of Table 400-2 of MORT & H. in 50:30:20 proportion of 40 mm, 20 mm crusher broken metal and sand respectively, spreading on prepared surface, mixing by mix in place method at OMC and compacting to achieve the desired density etc. complete asper Clause 401 for Grading-II material etc.complete.

Providing, Laying, Spreading and compacting stone aggregates of specific sizes to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with 3-wheeled steel/vibratory roller 8 to 10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fill up the interstices of coarse aggregate, watering and compacting to the required density, etc. complete. A )For metal grade I, using stone screening type A

Providing, Laying, Spreading and compacting stone aggregates of specific sizes to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with 3-wheeled steel/vibratory roller 8 to 10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fill up the interstices of coarse aggregate, watering and compacting to the required density, etc. complete. B) For metal grade II, using stone screening type B

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete.

Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge.

Providing to contraction joints polysuphide sealent (Pouringgrade) confirming to BS : 5212 - 1989 into sawed groovewidened at top for sealent reservoir of specified size andshape as per detailed drawing including fixing Polyethylenefoam back up rod of required diameter (appraox. 25% largerthan the initial 3 mm.to 4 mm. joint) overlaid with bondbreaking tape as per detailed drawing. Item includescleaning the joints with water jet / air compressor & allowingjoint to become thoroughly dry before sealent is applied andapplying primer. is applied and applying primer.

Providing and laying 125 micron Low Density Polyethylene ( LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete.

Providing and fixing in position mild steel 25 mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C & wherever directed including handling, straightening, necessary cutting supported by HYSD chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete.

Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at 30.00 cm. C/C and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT FE 500, chairs with proper alignment etc. complete.

Steel Fiber Reinforcement: Supplying, Providing and Mixing Hooked End/Crimped steel fibers with aspect ratio between 50 to 80 (Diameter between 0.45 to 01mm and length between 12.5 to 60mm) manufactured from cold drawn wire and having a minimum tensile strength of 1100N/Sq.mm, as per CE Certification label mark, HE non-glued/ HE glued, non-balling, conforming to ASTM A 820 /EN 14889-1, compatible with all construction chemicals used for the batching, laying and curing of concrete. The fibers shall be added to the concrete at specified dosage and shall be mixed with the concrete ingredients for sufficient time to ensure uniform distribution and pumping concrete. Addition of steel fibers in cement concrete for flooring/ pavement/CC roads (All ground supported slab)/underground structure/precast items (like drains, manhole covers, walls, paver blocks, pipes, tunnel segments) etc. doses as per approved designs and directions of Engineer-in-Charge. HSN Code for Steel Fibres is 73170013. Regularly used are MSCF 50; MSH 10050; MSH 7560; MSH7035; MSH 6035; MSH 5530; NSH-G 7560; MSH-G 7035; MSH-G 6035; MSH-G 5530 etc. are some of the widely used sizes.

Supplying hard murum/ kankar at the road site, including conveying and stacking complete.

Spreading hard murum/ soft murrum/ gravel or kankar for side width complete

Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete.

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.

Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 square meter made out of ____mm aluminum sheet bonded with white retro reflective sheeting of Class __ ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Providing and casting in situ or precast tapering R.C.C. M-20 Barrier type Kerb without gutter ( as per IRC 86 1983) embedded 125mm below ground level over M-10 PCC finished neatly with C.M. 1:2, setting the same in C.M. 1:2, including the required excavation in any strata and removing the excavated stuff any where in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant

Supply & Fixing of Rock / Stone Finished outdoor vitrified flooring Tiles 16 mm thick and required width wide in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning complete with prior approval of concerned Superitending Engineer. .

Stamp Concrete of 100mm Thickness - Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (natural sand / VSI grade finely washed crushed sand) Confirming to IS 383, as per mixed in a batching and mixing plant / non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site in nagpur city with lead upto 20KM (on Inner Ring Road from Avasti nagar to wadi), spreading, laying with approved make pover, compacted and finished in a continous operation, finishing to lines and grades Also Providing, Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has

Providing and laying in situ cement concrete of M-20 proportion with trapmetal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with fine agreegates of required specifications With 70% natural sand and 30% VSI grade crushed sand

Providing cast in situ M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer) With 70% natural sand and 30% VSI grade crushed sand with SCADA

Providing and laying in situ M25 controlled cement concrete of trap metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (height up to 4 meter with pan mixer With 70% natural sand and 30% VSI grade crushed sand with SCADA

Providing and laying weep holes of 100 mm diameter AC/PVC pipes as per drawing for abutment returns, return walls etc. Complete.

Providing internal cement plaster 12 mm thick in a single coat in cement mortar 1:5 with fine cement finish to concrete or brick surface in all positions including scaffolding and curing complete.

Providing and fixing cattle catcher of required size with outer frame and supporting members made of ISMC 100 ,fixing "B" class GI pipe of size 40 mm over supporting frameand fixing 65 mm dia. "B" class pipe around 40 mm dia. Pipe including fabrication,fixing,one coat of anticorrosive paint and two coats of oil painting etc. complete.(Total structure supported on ISMB 150 in shorter direction @ 1 m c/c)

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.GF

Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete.

Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete.

Excavation for foundation in hard murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete.Lift upto 1.5 m

Excavation for foundation in hard murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete.Lift from1.5 m to 3 m

Providing rubble filling of trap/ granite/ quartzite gneiss stones for foundations including hand packing filling gravel / sand in the voids etc. complete.

Providing and laying in situ cement concrete of M10 proportion with trap metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixe Natural sand

Providing and laying in situ M-20 plain cement concrete of trap metal for cast in citu piers, abutment, returns, wings etc. including provision of "V" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer in charge

Providing and laying in situ M25 controlled cement concrete of trap metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (height up to 4 meter with pan mixer with Natural

Providing and laying Cast in situ cement concrete in M20 of trap metal for bed blocks, foundation blocks and such other items including bailing out water, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with reversible Drum Type mixer etc. complete. With natural sand

Driiling of 150 mm dia Borewell by machine in all kind of Soil, Sand, Clay, Murum, Soft Rock, Hard Rock, etc truly vertical with required equipments and labour etc complete as directed by engineer incharge.

Providing 140 mm dia PVC perforated Pipe for casing of 4 KG/SQ.M. grade as per IS 4985-1988 up to depth of Soft/ Hard Rock. Including Grouting.

Providing, fabricating and erecting at site of work the tubular steel structure (shed) of standard size as per standard design and specifications having various spans ranging from 6 mt. to 18 mt. Length in between trusses and in multiples of standard length of bays as specified as per standard specifications inclusive of cost of steel tubular trusses, tubular columns, (3.5 m.height), purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade complete

Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete.

Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils.

Excavation for catch / side water gutter in Hard murum and boulder strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed.

Providing and laying in situ cement concrete of M-10 proportion with trapmetal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with fine agreegates of required specifications ( VSI sand finely washed etc )

DECK TOWNHALL CHAIR. FOR AUDITORIUM CHAIRS DESCRIPTION: DECK TOWNHALL CHAIR Mechanism: Tip-up & Back push recliner chairs. Center to center : 20 inches Plywood (hardwood) with induction heating and high pressure pressed. ABS moulded housing for seat & back cushions. Armrest Made of PP/PPCP LED lights on sides along with aisles (additional cost) POLYURETHANE FOAMS Polyurethane injection moulded flexible Foam Seat and Back density 50 – 55 kg/m3. SPRINGS Torsion spring/ spring steel IS: 4454 1981 Grade III SHEET METAL COMPONENTS HRCA Bars POWDER COATING: Electrostatic epoxy Coating thickness 70 - 80 microns

Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish.

HIGH BACK CHAIR Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery

MID BACK CHAIR FOR CONFERENCE Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery

Lockers Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. Providing and fixing Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. with 12 Compartments , Complete body & shutter made of CRCA Sheet with powder coated finish as per approved color.

Tea Table 900mm X 750mm X 450mm Providing And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Waterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc.

Full Height Steel Storage @ 750Lx450Dx2100H Providing and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing.

Full Height Partitions in Solid finish Full Height Partitions in Solid finish - Providing and Fixing 80mm to 85mm thick Full height Double Skin partition up to 3 mtr height with All visible sections in Anodized / Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 9mm thk. Prelaminated Partical Board of on both side. With all the Joints in the partitions covered with PVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates. as per design and drawing.

Full Height Partitions in Glass finish - Providing and Fixing 80mm to 85mm thick Full height Double Skin partition up to 3 mtr height with All visible sections in Anodized / Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 5mm thk. Non Toughened Glass on both side. With all the Joints in the partitions covered with PVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates. as per design and drawing.

Glass Door With Door Frame Providing & fixing of Glass Door & Frame @ 900mm x 2100mm - 12 mm thk toughened glass door with frame in Anodized Aluminium with rubber gasket on both verticals for better sound proofing and provision for one side opening along Hardware consisting of Floor Spring Dorma/ Equivalent, Patch fitting , Lock, door stopper and Handle, as per design and drawing and instructions of Engineer in charge.

Vertical blinds Providing and Fixing Vertical Blinds of approved Make and shade of 100mm regular fabric with powder coated aluminium channel with telting PVC chain & bottom weight plate with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work)

Roller blinds Providing and Fixing Vertical Blinds of approved Make and shade of 100mm regular fabric with powder coated aluminium channel with telting PVC chain & bottom weight plate with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work)

2 SEATER SOFA @ 1415LX775DX800HT. OVERALL SIZE - 1415 X 775 X 800 mm (LxDxH) for 2 seater sofa Supply and placing of Host sofa 3/2/1 SEATER over all dimension for 11915 / 1415 / 880 mm length and over all height is 800,over all width is775 mm, seat height is 430 m,seat depth is,550mm understructure is made up of Natural Hard wood battens and 12mm THK COMMERCIAL PLYWOOD. High density foam is used for seat and back , LEATHERITE -ABRASION RESISTANCE in excess of 80,000 cycles, 600 to 650 GSM composition is PVC and color is NAPOLI BLACK/ MANILA BEIGE / BURGUNDY RED

3 SEATER TURF SOFA @ 1918LX775DX800HT. OVERALL SIZE -1918 X 775 X 800 mm (LxDxH) for 3 seater sofa Supply and placing of Host sofa 3/2/1 SEATER over all dimension for 11915 / 1415 / 880 mm length and over all height is 800,over all width is775 mm, seat height is 430 m,seat depth is,550mm understructure is made up of Natural Hard wood battens and 12mm THK COMMERCIAL PLYWOOD. High density foam is used for seat and back , LEATHERITE -ABRASION RESISTANCE in excess of 80,000 cycles, 600 to 650 GSM composition is PVC and color is NAPOLI BLACK/ MANILA BEIGE / BURGUNDY RED

PISS CENTRE TABLE 1200 W x 600Dx350 H Table top :-to be made of 12 mm thick plain toughened glass Understructure:- to be made of SS finish

BUDDY CENTER TABLE @ 600LX600DX450. TOP: 25 mm thick Prelaminated board, reverse Chamfered edge, in Frosty white/ Urban Teak UNDERSTRUCTURE : MS Swage Pipe in Sliver Grey - Powder Coated finish

SINGLE BED. @2020LX960DX750/600HT. (H) WITH SIDE TABLE @ 450LX450DX520HT. Material Specification : W Single Bed Head / Tail / Side Board : Made up of 18mm THK Pre- Lam Particle board with 2mm thk PVC lipping Bed Board : Made up of 18mm THK Pre- Lam Particle board with 0.8mm thk PVC lipping Pre-Lam Particle board conforms to IS 12823:1990 with a thickness of 2mm and PVC lipping with KILBERIT-779 glue. Metal Understructure : 'C' type frame & Cross members are made up of in 25X25X1.2mm THK MS Square pipe conforms to IS 4923 and the frame finished with powder coat up to 50 -60 MICRON. Foot pad : Made up of injection moulded in Nylon, Diameter 15mm and 7mm thk on the Head and Tail Board and 25 X 25 X 3thk Injection moulded nylon bush on Square pipe. Suitable mattress size : 78"X36" Construction : Flat Pack BED SIDE TABLE:- Carcass: Made up of 18mm THK Pre- Lam Particle board with 2mm thk PVC lipping Drawer Assembly: Drawer fascia made up of 18mm THK Pre- Lam Particle board with 2.0mm thk PVC lipping. Drawer internal made up of 18mm THK Pre- Lam Particle board with 0.8mm thk PVC lipping. Drawer Talia is made up of 9mm THK Pre- Lam Particle board . Pre-Lam Particle board conforms to IS 12823:2015 with a thickness of 2mm and PVC lipping with KILBERIT-779 glue. KNOB: Made up of mild steel and finished with chrome, Diameter 20mm and 20mm Long. FOOT PAD : Made up of injection moulded in Nylon, Diameter 15mm and 7mm thk Dimensions : 450 (L) x 450 (W) X450 (H) Construction : Flat Pack

SINGLE BED METAL SERIES -I – M1 Single Bed with@2050 (L) x 955 (W) X750/600 (H) Bed Board : Made up of 0.8mm CR sheet finished with powder coat up to 50 -60 MICRON. . Metal Understructure : Headboard & Tailboard made up of combination of Dia 32x1.6mm THK MS Round pipe & Dia 19x1.2mm THK MS Round pipe conforms to IS 4923 and finished with powder coat up to 50 -60 MICRON. Dimensions : 2050 (L) x 955 (W) X750/600 (H) Suitable mattress size : 78"X36" Construction : Flat Pack

PRELAM 2 SHUTTER WARDROBE @ 900LX600DX1800HT. WITHOUT MIRROR Providing and Fixing Wardrobe without Mirror of size 900 LX 600DX 1800H The wardrobe side panels and doors are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 18mm thick Prelam Particle Board with decorative laminate on both sides. The top is made of 36 mm prelam particle board with decorative laminate on both sides. (18mm Prelam Particle board and 18mm batons on all sides to achieve 36mm overall thickness). The exposed edges of the top are sealed with 2mm thick PVC edge Banding. The top most part of the wardrobe has an aluminum hanger rod of EBCO make. One drawer of size 400(W) x 150(H) x 450 (D) made of 18mm thick prelam Particle Board has been considered. The drawer will have a multipurpose lock of EBCO premium make. The wardrobe handles are Satin SS finish of 160 mm pitch. The wardrobe has a multipurpose lock of EBCO make. All hinges considered are Hettich make. Necessary good quality hardwares have been considered as required.

PRELAM 3 SHUTTER WARDROBE @ 1500LX600DX1800HT. WITHOUT MIRROR Providing and Fixing Wardrobe without Mirror of size 1500 LX 600DX 1800H The wardrobe side panels and doors are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 18mm thick Prelam Particle Board with decorative laminate on both sides. The top is made of 36 mm prelam particle board with decorative laminate on both sides. (18mm Prelam Particle board and 18mm batons on all sides to achieve 36mm overall thickness). The exposed edges of the top are sealed with 2mm thick PVC edge Banding. The top most part of the wardrobe has an aluminum hanger rod of EBCO make. Two drawers of size 400(W) x 150(H) x 450 (D) made of 18mm thick prelam Particle Board has been considered. The drawer will have a multipurpose lock of EBCO premium make. The wardrobe handles are Satin SS finish of 160 mm pitch. The wardrobe has a multipurpose lock of EBCO make. All hinges considered are Hettich make. Necessary good quality hardwares have been considered as required.

METAL SERIES -I – M1 Study table Dimensions :1200(L) x600(W) X750 (H) Pedestal Size :- 400(L) x550(W) X515 (H) Table top: Made up of 25mm THK Pre- Lam Particle board with 2mm thk PVC lipping Pre-Lam Particle board conforms to IS 12823:1990 with a thickness of 2mm and PVC lipping with KILBERIT-779 glue. Metal Understructure : End frame made up of in Dia25X1.2mm THK MS Round pipe & cross Member made up of 25x25x1.2mm TGHK Square pipe conforms to IS 4923 and the frame finished with powder coat up to 50 -60 MICRON. Pedestal: Carcass Made up of 0.8mm THK CR sheet & drawer facia is made up of 1.2mm THK CR sheet finished with powder coat up to 50 -60 MICRON

WUDMATE chair with arms The seat and back shall be made up of wood veneer with foam back. The chair can also be provided with fixed wooden armrests .The dimensions of back shall be 49 cm (W) X 37 cm (H) and of seat shall be 51 cm (W) X 50.0cm (D). The Seat and Back Inner shall be upholstered with PU foam and fabric and shall be assembled over the seat and back. The chair is made of Rubber wood veneer with thickness of the leg 25 mm and width of the leg at 28mm. Seat Height - 46 cm, Height-83.0cm, Width & Depth of Chair as measured from base - Width-60.0cm and Depth-56.0 cm.Dimensions tolerance / variations shall be within +/- 1 cm.

FREE STANDING TABLE @ 1800LX750DX750Ht. Supply, Fitting & Fixing of SOS Make Prelam Cabin. @ 1500LX600DX750HT. Work Top- Shall be made up of Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section Understructure- Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823: 1990. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top. Standard depth of work top will be 600mm and 750mm. Wire management- Wire manager cap on the table top shall be made of ABS material having Diameter 63.5mm standard.The product must be from a Manufacturer having ISO 9001,ISO 14001,Latest BIFMA 5.1 certificates for few of its products.

(2B+1F) PEDESTAL @ 400LX450DX670HT. PEDESTAL @ 400LX450DX750HT. Pedestal Top- Shall be made 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section Pedestal body- Pedestal LH side panel RH side panel and back shall be made up of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Side panel - Bottom and Top . panel to be assembled with the help of wooden dowel - knock down fittings Drum with screw and corner fittings to ensure stability of box structure formed. Top - Side Panel - Bottom with proper 9mm thick grooving done near to back side edge for fitment of back panel .9 mm step grooving is done on Back panel and it slide into the side panel groove and fix by applying the glue on the edges. Pedestal body shall be fitted to the ground with M6 levelers or Nylon caster 40mm Drawer- Shall be made up of be made of 0.7 mm thick CRCA sheet confirming to IS 513: 2008 with powder coated finish up to 50 to 60 Micron and Drawer facia made up of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. C type SS brush finish handle is used in both the shutter of 96mm CD (center to center distance of handle hole). Box drawers mounted on 27x400mm Telescopic slide with 3/4 extension and File Drawer mounted on 37x400mm Telescopic slide with full extension. Generally 2 types of standard drawer are offered Box drawer in 352x400x70mm and File drawer in 352x400x 245mm. Provision of centralize locking for all the drawers. Generally Hettich make multi drawer lock system is offered.

PRELAM STORAGE @ 1050LX450DX750HT. Supply, Fitting & Fixing of SOS Make Prelam Storage. Storage Top- Shall be made of 25mm thick Prelam (OSL) particle board for low height Prelam storage up to 750 Height and above 750mm height 18mm Thick prelam (OSl) particle board is used. Both the 25mm and 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Storage top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Load carrying capacity of 18mm thick shelf shall be 25kgs UDL.Storage Body- The construction shall be aesthetically appealing completely knock down construction .side panel and back panel is made from 18 mm Prelam (OSL) particle board conforming to IS 12823:1990;. All the exposed edges are with 2mm PVC lipping& sealed edges are with 0.8mm thick PVC Lipping. Both the LH & RH side panel and back panel are connected with each other by using fittings such as Minifix & Dowels. Shelf can be made up of 18mm Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Shelf is mounted on shelf pin and self-height can be adjusted with in the limit. Prelam Shutter- The complete storage shall have two shutters of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue and are hinged shutter with equal width hung with 0 Crank on side panel and 9.5 crank hinges on middle vertical panel. C type SS brush finish handle is used in both the shutter of 96mm CD(center to center distance handle hole)and Hettich make. Black color PVC door strip and multi-purpose square lock (Hettich or Ebco) is used.

PRELAM STORAGE @ 1050LX450DX750HT. Supply, Fitting & Fixing of SOS Make Prelam Storage. Storage Top- Shall be made of 25mm thick Prelam (OSL) particle board for low height Prelam storage up to 750 Height and above 750mm height 18mm Thick prelam (OSl) particle board is used. Both the 25mm and 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Storage top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Load carrying capacity of 18mm thick shelf shall be 25kgs UDL. Storage Body- The construction shall be aesthetically appealing completely knock down construction .side panel and back panel is made from 18 mm Prelam (OSL) particle board conforming to IS 12823:1990;. All the exposed edges are with 2mm PVC lipping& sealed edges are with 0.8mm thick PVC Lipping. Both the LH & RH side panel and back panel are connected with each other by using fittings such as Minifix & Dowels. Shelf can be made up of 18mm Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Shelf is mounted on shelf pin and self-height can be adjusted with in the limit. Prelam Shutter- The complete storage shall have two shutters of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue and are hinged shutter with equal width hung with 0 Crank on side panel and 9.5 crank hinges on middle vertical panel. C type SS brush finish handle is used in both the shutter of 96mm CD(center to center distance handle hole)and Hettich make. Black color PVC door strip and multi-purpose square lock (Hettich or Ebco) is used.

SS DINING TABLE WITH FOLDING CHAIR- FOR DINING Top- Top is made up of Stainless steel having a length of 1800(L) X 760(D) X 750(H) confirming the grade 304 Understructure- Understructure- legs vertical member are made up of 40 x 40 x 1.2 mm thick MS pipe confirming the IS 4932 with powder coated finish up to 50 to 60 Micron. Horizontal member is made up of 25 x 25 x 1.2 mm thick confirming the IS 4923with powder coated finish up to 50 to 60 Micron. Both the horizontal and vertical pipes are welded together by MIG welding confirming to IS standard IS 816:1969 and it is welding also tested by confirming to IS 822:1970. Understructure height will be 725mm from the ground, and the bench height will be 500mm from the ground.

MAIN TABLE ASSY 50MM THK MDF VENEER WITH BBF PEDESTAL ONE SIDE LHS 2400WX1200DX750H WITH Return Storage With Wooden Drawer Assly. [ LH ] @ 1800 X 600 X 625 HT. & Cube Back Storage With 3 Door Assly. @ 1650 X 600 X 625 HT. 3NOS. BACK UNIT Cube Back Upper Storage Assly. Open Shelf With Glass Door.@ 1650 X 450 X 1475 HT. 2 NOS. FOR DIRECTOR CABIN Supply and installation SOS make cube cabin table Work table-it is 50mm thick batten structure which is made up 25mm thick prelam particle board batten and 12 +12 mm thick MDF board batten. 0.3 mm Veneer sheet is past on both the side of the structure with 0.3 mm thick veneer lipping glued with Kliberit-779.6 glue.Total thick ness of the TOP is Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Understructure- Gable end is Made up of it is batten structure is which is made up 25mm thick prelam particle board batten confirming to IS 12823: 1990 and 12+12 mm thick MDF board batten confirming of grade SBG II of IS 12406/Latest. 0.3 mm Veneer sheet is past on both the side of the structure with 0.3 mm thick veneer lipping glued with Kliberit-779.6 glue. Modesty is made up of 17 mm thick plane MDF board and 0.3 mm veneer sheet is paste on both the side. Modesty is having 600mm fixed height. The construction shall be aesthetically appealing completely knock down construction. All the panels are connected with each other by using fittings such as Minifix & Dowels.Cube main table with LH pedestal- it is batten structure is which is made up 25mm thick prelam particle board batten confirming to IS 12823: 1990 and 12 +12 mm thick MDF board batten confirming of grade SBG II of IS 12406/Latest. 0.3 mm Veneer sheet is past on both the side of the structure with 0.3 mm thick veneer lipping glued with Kliberit-779.6 glue. Total thick ness of the TOP is Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section Main body -The construction shall be aesthetically appealing completely knock down construction. LH and RH side is made in batten structure is which is made up 25mm thick prelam particle board batten confirming to IS 12823: 1990 and 12+12 mm thick MDF board batten confirming of grade SBG II of IS 12406/Latest. 0.3 mm Veneer sheet is past on both the side of the structure with 0.3 mm thick veneer lipping glued with Kliberit-779.6 glue. Both the side panel is having 600mm depth and 590mm height. bottom panel is made of 17 mm thick plane MDF board confirming of grade SBG II of IS 12406/Latest and 0.3 mm veneer sheet is paste on both the side of the panel. LH and RH vertical panel is made up of 561mm(D)x522mm(H)x17mm thick plane MDF board confirming of grade SBG II of IS 12406/Latest and 0.3 mm veneer sheet is paste on both the side of the panel. LH and RH middle vertical panel act as support member for shelfs. Shelf are made up 17 mm thick plane MDF board confirming of grade SBG II of IS 12406/Latest and 0.3 mm veneer sheet is paste on both the side of the panel. Shelf are divided into two parts big shelf and small shelf with respective lengthand both the shelf’s having depth of 500mm .Drawers- Drawer body is made up of 12mm MDF RAW board conforming to IS 12823:1990 and drawer base is made up of 9mm thick MDF RAW board conforming to SBG II of IS 12406/Latest. Finger groove Drawer fascia made up of 17mm thick plane MDF board confirming IS grade SBG II of IS 12406/Latest and 0.3 veneer sheet is paste on both the side of RH panel with 0.3 mm thick veneer lipping glued with Kliberit-779.6 glue. Larger drawers is mounted on Hettich soft closing 37x400mm Telescopic slide with full extension and small drawer is mounted on Hettich soft closing 27x400mm Telescopic slide with 3/4 extension . Generally Hettich make multi drawer lock system is offered. Back storage- Storage top - is made up of 25mm thick MDF raw board confirming SBG II of IS 12406/Latest 0.3 mm Veneer sheet is past on both the side of the structure with 0.3 mm thick veneer lipping glued with Kliberit-779.6 glueReturn storage- Storage Top- is made up of 25mm thick MDF raw board confirming SBG II of IS 12406/Latest 0.3 mm Veneer sheet is past on both the side of the structure with 0.3 mm thick veneer lipping glued with Kliberit-779.6 glue. Return storage body- The construction shall be aesthetically appealing completely knock down construction. LH and RH side is made in batten structure is which is made up 25mm thick prelam particle board batten confirming to IS 12823: 1990 and 12+12 mm thick MDF board batten confirming of grade SBG II of IS 12406/Latest. 0.3 mm Veneer sheet is past on both the side of the structure with 0.3 mm thick veneer lipping glued with Kliberit-779.6 glue. Side panel is having a height of 590mm.bottom panel is made of 17 mm thick plane MDF board confirming of grade SBG II of IS 12406/Latest and 0.3 mm veneer sheet is paste on both the side of the panel. Shelf are made up 17 mm thick plane MDF board confirming of grade SBG II of IS 12406/Latest and 0.3 mm veneer sheet is paste on both the side of the panel. Shelf are divided into two parts big shelf and small shelf which having the depth of 560mm and 450mm. Shelfs are supported by LH and RH vertical panel which is made up of 561mm(D)x522mm(H)x17mm thick plane MDF board confirming of grade SBG II of IS 12406/Latest and 0.3 mm veneer sheet is paste on both the side of the panel. All the panels are connected with each other by using fittings such as Minifix & Dowels. Storage shutter- Is made up of 520mmx 422mmx17mm 17 mm thick plane MDF board confirming of grade SBG II of IS 12406/Latest and 0.3 mm veneer sheet is paste on both the side of the panel. Shutter is mounted on equally distributed soft closing hinges Hittech or Ebco make. Hettich make Multipurpose square lock is used to lock the shutter.Storage shutter-Is made up of 520mmx 422mmx17mm 17 mm thick plane MDF board confirming of grade SBG II of IS 12406/Latest and 0.3 mm veneer sheet is paste on both the side of the panel. Shutter is mounted on equally distributed soft closing hinges Hittech or Ebco make. Hettich make Multipurpose square lock is used to lock the shutter.

TABLE 2100WX900DX750H WITH WRAP RETURN STORAGE @ 1050WX460DX750HT. & WRAP BACK STORAGE @ 1350WX460DX750H. 2 NOS . FOR SUPERITENDENT CABIN Wrap cabin table. Supply, Fitting & Fixing of SOS Make Wrap Cabin Table Work Top- Is made up of 37mm thick dual color edge in Sandwich of 25 thk Prelam particle board and 12 mm thk BSL Prelam particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Understructure –Gable end is made up of 37mm thick dual color edge in Sandwich of 25 thk Prelam particle board and 12 mm thk BSL Prelam particle board confirming to IS 12823: 1990 in slate grey with 2mm & 0.45mm thick PVC lipping glued with Kliberit-779.6 glue. Sandwiching is done by using 10x12mm KD and 8x12mm Dowel. Gable end shall be fitted to the ground with M6x25 screw leveler with the height adjustment up to 12mm to 15mm.modesty is made up 18 mm thick Prelam particle board confirming to IS 12823: 1990 in slate grey with 2mm & 0.45mm thick PVC lipping glued with Kliberit-779.6 glue. Sandwiching is done at lower edge of the modesty by adding 18 mm thick Prelam particle board confirming to IS 12823: 1990. Return Storage- Storage top -Shall be made 25mm thick Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Access flap cutout is given on top having 443x112mm in size. Body-Both the LH and RH side panel is made up of 25mm thick Prelam (BSL) particle board confirming to IS 12823: 1990 with 0.45mm thick PVC lipping glued with Kliberit-779.6 glue. Back panel & Bottom is made up of 18mm thick Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm & 0.45 mm PVC lipping glued with Kliberit-779.6 glue. Back panel having height 715mm. Bottom support is also made up of 18mm thick Prelam particle board confirming to IS 12823: 1990. Bottom support is fixed with the bottom by M8x40 wooden dowel at the center of the bottom panel. side panel, back panel and bottom panel is fixed by using fittings such as Minifix & Dowels. At the storage base leveler bracket screwed to give more strength to the body. Leveler bracket is made up of 35x34x2mm thick CRCA sheet confirming to IS 513: 2008. M10x25mm leveler bolt is used in leveler bracket. Vertical panels are made up of 18mm thick Prelam (BSL) particle board confirming to IS 12823: 1990 with 0.45 mm PVC lipping glued with Kliberit-779.6 glue.Wire management- Electrical wires shall be carried from return storage back panel from 38mm diameter hole. Horizontally wire shall float in switch mounted box 450LX125H shall be made of 0.7mm CRCA sheet confirming to IS 513:2008.Switch mounting box directly screwed to table top from the bottom side. Switch plate is provided on Switch Mounting Box for mounting electrical standard switch plate. Switch Plate shall be made up of 1.5mm CRCA sheet confirming to IS 513:2008 and switch plate can be screwed on switch mounting box by using 8x15mm Pan Head ST Screw. Access flap@ 450x120mm will be fitted on work top above to the switch mounting box. Access flap and its components shall be made of aluminum extrusions of material IS 733:1983 The product must be from a Manufacturer having ISO 9001,ISO 14001,ISO 45001, Green Pro,Latest BIFMA 5.1 certificates for few of its products. Drawers – Drawer Front, back and side panel is made up 12mm thick Prelam (BSL) particle board confirming to IS 12823: 1990 with 0.45mm thick PVC lipping glued with Kliberit-779.6 glue. Bottom is made up 9mm Prelam (OSL) particle board confirming to IS 12823: 1990. 2 types of standard drawer are offered Box drawer in 400Dx85Ht mm and File drawer in 400x250Ht mm.Drawers are mounted on Hettich Slide 45x450mm soft closing. Drawer fascia made up of box drawer 18mm thick Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue having height of 475mm .File Drawer fascia is made up of18mm thick Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue having height of 130mm. Fingered groove type handle is used in all the shutters. Multipurpose square lock is used with locking strip. WRAP Back storage assembly Storage top - Top shall be made 25mm thick Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Storage body-Both the LH and RH side panel is made up of 25mm thick Prelam (BSL) particle board confirming to IS 12823: 1990 with 0.45mm thick PVC lipping glued with Kliberit-779.6 glue. Back panel & Bottom is made up of 18mm thick Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm & 0.45 mm PVC lipping glued with Kliberit-779.6 glue. Back panel having height 715mm. Bottom support is also made up of 18mm thick Prelam particle board confirming to IS 12823: 1990. Bottom support is fixed with the bottom by M8x40 wooden dowel at the center of the bottom panel. side panel, back panel and bottom panel is fixed by using fittings such as Minifix & Dowels. At the storage base leveler bracket screwed to give more strength to the body. Leveler bracket is made up of 35x34x2mm thick CRCA sheet confirming to IS 513: 2008.M10x25mm leveler bolt is used in leveler bracket. Vertical panels 1 & 2 are made up of 18mm thick Prelam (BSL) particle board confirming to IS 12823: 1990 with 0.45 mm PVC lipping glued with Kliberit-779.6 glue. Shutter- The complete storage shall have two shutters of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue and are hinged shutter with equal width hung with 0 Crank on side panel and 9.5 crank hinges on middle vertical panel. Fingered groove type handle is used in all the shutters. Black color PVC door strip and multi-purpose square lock (Hettich or Ebco) is used.

PRELAM FREE STANDING TABLE @ 1800LX900DX750HT. WITH 2B+1F PEDESTAL @ 400LX450DX670HT. Supply, Fitting & Fixing of SOS Make Prelam Cabin. Work Top- Shall be made up of Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section Understructure- Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823: 1990. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top. Standard depth of work top will be 600mm and 750mm.Pedestal body- Pedestal LH side panel RH side panel and back shall be made up of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Side panel - Bottom and Top panel to be assembled with the help of wooden dowel - knock down fittings Drum with screw and corner fittings to ensure stability of box structure formed. Top - Side Panel - Bottom with proper 9mm thick grooving done near to back side edge for fitment of back panel .9 mm step grooving is done on Back panel and it slide into the side panel groove and fix by applying the glue on the edges. Pedestal body shall be fitted to the ground with M6 levelers or Nylon caster 40mm.Wire management- Wire manager cap on the table top shall be made of ABS material having Diameter 63.5mm standard.The product must be from a Manufacturer having ISO 9001,ISO 14001,Latest BIFMA 5.1 certificates for few of its products. 2B+1F PEDESTAL @ 400LX450DX670HT. SPECIFICATIONS :- Pedestal Top- Shall be made 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section Drawer- Shall be made up of be made of 0.7 mm thick CRCA sheet confirming to IS 513: 2008 with powder coated finish up to 50 to 60 Micron and Drawer facia made up of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. C type SS brush finish handle is used in both the shutter of 96mm CD (center to center distance of handle hole). Box drawers mounted on 27x400mm Telescopic slide with 3/4 extension and File Drawer mounted on 37x400mm Telescopic slide with full extension. Generally 2 types of standard drawer are offered Box drawer in 352x400x70mm and File drawer in 352x400x 245mm. Provision of centralize locking for all the drawers. Generally Hettich make multi drawer lock system is offered.

PRELAM FREE STANDING TABLE @ 1500LX600DX750HT. WITH 2B+1F PEDESTAL @ 400LX450DX670HT. Supply, Fitting & Fixing of SOS Make Prelam Cabin. Work Top- Shall be made up of Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section Understructure- Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823: 1990. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top. Standard depth of work top will be 600mm and 750mm. Wire management- Wire manager cap on the table top shall be made of ABS material having Diameter 63.5mm standard.The product must be from a Manufacturer having ISO 9001,ISO 14001,Latest BIFMA 5.1 certificates for few of its products. 2B+1F PEDESTAL @ 400LX450DX670HT. SPECIFICATIONS :- Pedestal Top- Shall be made 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section Pedestal body- Pedestal LH side panel RH side panel and back shall be made up of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Side panel - Bottom and Top panel to be assembled with the help of wooden dowel - knock down fittings Drum with screw and corner fittings to ensure stability of box structure formed. Top - Side Panel - Bottom with proper 9mm thick grooving done near to back side edge for fitment of back panel .9 mm step grooving is done on Back panel and it slide into the side panel groove and fix by applying the glue on the edges. Pedestal body shall be fitted to the ground with M6 levelers or Nylon caster 40mm. Drawer- Shall be made up of be made of 0.7 mm thick CRCA sheet confirming to IS 513: 2008 with powder coated finish up to 50 to 60 Micron and Drawer facia made up of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. C type SS brush finish handle is used in both the shutter of 96mm CD (center to center distance of handle hole). Box drawers mounted on 27x400mm Telescopic slide with 3/4 extension and File Drawer mounted on 37x400mm Telescopic slide with full extension. Generally 2 types of standard drawer are offered Box drawer in 352x400x70mm and File drawer in 352x400x 245mm. Provision of centralize locking for all the drawers. Generally Hettich make multi drawer lock system is offered.

PRELAM FREE STANDING TABLE @ 1350LX600DX750HT. WITH 2B+1F PEDESTAL @ 400LX450DX670HT. Supply, Fitting & Fixing of SOS Make Prelam Cabin. Work Top- Shall be made up of Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section Understructure- Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823: 1990. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top. Standard depth of work top will be 600mm and 750mm. Wire management- Wire manager cap on the table top shall be made of ABS material having Diameter 63.5mm standard.The product must be from a Manufacturer having ISO 9001,ISO 14001,Latest BIFMA 5.1 certificates for few of its products. 2B+1F PEDESTAL @ 400LX450DX670HT. SPECIFICATIONS :- Pedestal Top- Shall be made 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section Pedestal body- Pedestal LH side panel RH side panel and back shall be made up of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Side panel - Bottom and Top panel to be assembled with the help of wooden dowel - knock down fittings Drum with screw and corner fittings to ensure stability of box structure formed. Top - Side Panel - Bottom with proper 9mm thick grooving done near to back side edge for fitment of back panel .9 mm step grooving is done on Back panel and it slide into the side panel groove and fix by applying the glue on the edges. Pedestal body shall be fitted to the ground with M6 levelers or Nylon caster 40mm.Drawer- Shall be made up of be made of 0.7 mm thick CRCA sheet confirming to IS 513: 2008 with powder coated finish up to 50 to 60 Micron and Drawer facia made up of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. C type SS brush finish handle is used in both the shutter of 96mm CD (center to center distance of handle hole). Box drawers mounted on 27x400mm Telescopic slide with 3/4 extension and File Drawer mounted on 37x400mm Telescopic slide with full extension. Generally 2 types of standard drawer are offered Box drawer in 352x400x70mm and File drawer in 352x400x 245mm. Provision of centralize locking for all the drawers. Generally Hettich make multi drawer lock system is offered.

U SHAPRE PRELAM CONFERENCE TABLE @ FOR CONFERENCE HALL Prelam Conference Table- Supply, Fitting & Fixing of SOS Make Prelam Conference. Work Top- Shall be made up of Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Work top shape can be a round or rectangular. Understructure-Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823: 1990. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top standard. Wire management- Electrical wires shall be carried from 100x100mm vertical duct or Snake (Vertigo), vertical duct shall be made of 0.7mm CRCA sheet confirming to IS 513:2008.Horizontally wire shall float in switch mounted box 400LX174DX125H shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Switch plate is provided on Switch Mounting Box. Switch Plate shall be made up of 1.5mm CRCA sheet confirming to IS 513:2008 and switch plate can be screwed on switch mounting box or cable tray by using 8x15 mm Pan Head ST Screw. Access flap will be fitted on work top above to the switch mounting box. Access flap and its components shall be made of aluminum extrusions of material AL6963-T6. The product must be from a Manufacturer having ISO 9001,ISO 14001,Latest BIFMA 5.1 certificates for few of its products.

Classroom writing pad CHAIR BACKREST: The Back is made up of 12mm thick (7 layers) hot pressed plywood and moulded foam thickness 40 mm upholstered with fabric. 480 mm (H) X 455 mm (W) SEAT:The seat is made up of 12mm thick (7 layers) hot pressed plywood and moulded seat foam upholstered with fabric. Seat Size 470 mm (W) X 480 mm (D). SEAT AND BACK FOAM:Foam made out of moulded Polyurethane foam with the following properties:• Density (IS-7888-1976) : 50-55 Kg/m3.• Hardness: 28+/-3 Kgf. • Compression set (IS-7888-1976): 10% Max. • Tensile strength (IS-7888-1976): 0.9-1.2 Kg/cm2 • Tear strength(Min) (IS-8067) : 0.6 Kg/cm(min) • Resilience (IS-7888-1976): 40% - 60% • Elongation (IS-7888-1976): 110 % ARM PAD:FIXED ARM : The arm pad is moulded from Black polypropylene - size 245mm (L) x 67mm (W). UNDERSTRUCTURE:Understructure: The understructure is made up of Ø25.4 X 2mm thk M.S Pipe Finish: Powder coat (Black) SEAT AND BACK FABRIC PROPERTIES: Content:100% Polyester Weight:170 GSM Abrasion Resistance:Over 30000 cycle. Bursting Strength:19.1 kg/cm². Tear Strength (NF):Wrap - 30.58 ; Weft - 29.97. Breaking Strength (NF):Wrap - 375; Weft - 479. Elongation %:Wrap – 36.60 ; Weft – 75.90. Colour Fastness to Light:Adheres to Grade 5 [BS 1006 : 1990] Colour Fastness to Rubbing;Adheres to Dry: Grade 5 [ISO 105*12] Adheres to Wet: Grade 3-4 [ISO 105*12]

READING TABLE @ 1500LX1200DX750HT. Lineo cabin table- Supply, Fitting & Fixing of SOS Make Lineo cabin Table. Work Top - Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Understructure- C-type leg shall be made of vertical member 50X50X1.6mm thick and horizontal member of 40x40x1.6mm thick M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm LIP section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron.

READING TABLE @ 2100LX1200DX750HT. WITH 8MM GLASS SEPARATOR (FROSTED) PANEL @450H Lineo cabin table- Supply, Fitting & Fixing of SOS Make Lineo cabin Table. Work Top - Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Understructure- C-type leg shall be made of vertical member 50X50X1.6mm thick and horizontal member of 40x40x1.6mm thick M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Legs shall be fitted to the ground with M8 screw leveler with the height adjustment up to 12mm to 15mm.Cross member shall be made of 40mm X 40mm X 1.6mm LIP section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron.

PRELAM FREE STANDING TABLE @ 2250LX600DX750HT. WITH SIDE COMBO STORAGE @ 900LX450DX750HT. FOR RECEPTION TABLE Supply, Fitting & Fixing of SOS Make Prelam Cabin. Work Top- Shall be made up of Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section Understructure- Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823: 1990. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top. Standard depth of work top will be 600mm and 750mm. Wire management- Wire manager cap on the table top shall be made of ABS material having Diameter 63.5mm standard.The product must be from a Manufacturer having ISO 9001,ISO 14001,Latest BIFMA 5.1 certificates for few of its products. SIDE COMBO STORAGE @ 900LX450DX750HT. SPECIFICATIONS :- Storage Top- Shall be made of 25mm thick Prelam (OSL) particle board for low height Prelam storage up to 750 Height and above 750mm height 18mm Thick prelam (OSl) particle board is used. Both the 25mm and 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Storage top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Load carrying capacity of 18mm thick shelf shall be 25kgs UDL.Storage Body- The construction shall be aesthetically appealing completely knock down construction .side panel and back panel is made from 18 mm Prelam (OSL) particle board conforming to IS 12823:1990;. All the exposed edges are with 2mm PVC lipping& sealed edges are with 0.8mm thick PVC Lipping. Both the LH & RH side panel and back panel are connected with each other by using fittings such as Minifix & Dowels. Shelf can be made up of 18mm Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Shelf is mounted on shelf pin and self-height can be adjusted with in the limit. Prelam Shutter- The complete storage shall have two shutters of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue and are hinged shutter with equal width hung with 0 Crank on side panel and 9.5 crank hinges on middle vertical panel. C type SS brush finish handle is used in both the shutter of 96mm CD(center to center distance handle hole)and Hettich make. Black color PVC door strip and multi-purpose square lock (Hettich or Ebco) is used.

PRELAM ROUND MEETING TABLE @ 1200DIAX750HT Prelam Conference Table- Supply, Fitting & Fixing of SOS Make Prelam Conference. Work Top- Shall be made up of Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Work top shape can be a round or rectangular. Understructure-Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823: 1990. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top standard.

SHARING AND NON SHARING WORKSTATION @1350LX500DX1200HT. WITH 8MM GLASS SEPARATOR (FROSTED) PANEL @ 600LX450H AND KEY BORD TRAY FOR COMPUTER LAB Supply, Fitting & Fixing of SOS Make SL 60 Modular workstation. Work Top- Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Frame: -The frame shall be made of extruded aluminum sections having 60mm width and average wall thickness 1.6mm. The frame shall be powder coated with epoxy polyester powder with the average thickness 50 to 60 microns conforming to IS 13871: 1993. A-pole which is vertical supporting member of frame and horizontal members namely Top bar and Mid bar. Top bar shall be made of Aluminum extrusion having 60mm width and 1.6mm thickness and Mid bar is made up of MS pipe 15x15x1mm thick confirming the IS 13871:1993 end plates welded on both the ends .Mid bar end plate shall made up of CRCA sheet 50x20x2 mm thick confirming IS grade IS513: 2008 .Tile holder used to incorporate the tile at specified location shall be made of Aluminum. Top bar holder and leveler foot shall be made of 2mm thick CRCA confirming to IS513: 2008 with zinc coated finish. The frame shall be joined together by Aluminum connectors and all visible aluminum shall be powder coated. Main Frame shall be of 60mm thickness offering various functional and decorative finishes as well as cable management capacity. Height of frame available: 1200mm. Width of frame available: 1050mm, 1200mm. Joints/ posts/ connectors/trims: - The Two frame shall be joined together in 90 degree by using post connector shall be made of CRCA sheet confirming to IS513:2008. Connectors shall be fitted to A-Pole with the help of M6 x 16 pan-head machine screw and washer. The Corners shall be concealed by posts Covers, which shall be a half round Aluminum profiles made up of aluminum extrusion confirming IS733:1983. Posts cap shall be on upper side of post cove which are made of MAZAK die cast components. Height of post shall be matched to the A-pole of frame which is 1200mm.The exposed sides of the frames shall be covered with horizontal / vertical flat trims with round edges throughout the length, Curved trims on vertical and horizontal edges shall help to achieve smooth look, Trims shall be made of aluminum material Al6063-T6 with powder coated finish. All the frames shall be fitted with Aluminum top trims of material Al6063-T6.. Necessary cut-outs for housing wire outlet metal, separators shall be provided between wire and raceways. Wire management system shall be maintenance friendly and easy to install. Tiles- The tiles shall be made to fit the shape of the module and frame, These tiles shall be supported from top and bottom sides with the Tile holder. Tile holder used to incorporate the tile at specified location shall be made of 1.2m Aluminum extrusion confirming the IS 733:1983 with specified powder coating finish up 50 to 60 micron. Tiles are made up of by following material. PRELAMINATED TILES : Laminate tiles shall be made up of 9mm thick prelam one side laminated particle board confirming to IS2046: 1995 in color as specified and 1mm groove is made on both the edge of the tile. FABRIC (PLAIN) TILES: Fabric Plain tile shall be made of fabric wrapped 9mm thick particle board confirming to IS12823:1990 and back side of tile shall be sealed with fevicol PINUP FABRIC TILE: Fabric Pinup (Tackable) tile shall be made with 5.5mm thick PP sheet with 2.5mm thick MDF sheet with fabric wrapped on tile and back side of the tile shall be sealed with fevicol LAM MARKER TILE: Marker tile shall be made with 8mm laminated particle board confirming to IS12823:1990 with 1mm post lamination over it(Marker) Understructure - Vertical support to the work top shall be achieved by gable ends made of 25mm thick Prelam (BSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be fitted to the ground with M6 levelers Gable ends shall be straight and curved types. Gable end connect with the frame by using gable end bracket. Gable end bracket shall be made up of CRCA sheet 570 x 26 x 2 mm thick confirming IS grade IS513: 2008 with powder coated finished in 50 to 60 micron Or C TYPE Gable LEG. Vertical member of leg 50X50X1.6mm thick and horizontal member of 40x40x1.6mm thick M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Wire management: The modular system shall have raceways for electrical and data cables. Maximum wire management in all axes shall be achieved by flush mounted raceway designs and individually removable tiles. These raceways shall be provided at skirting, above table top or below table top as specified. The system shall have covers giving aesthetic appearance by covering all cable entries. Raceway profiles shall be made of steel whereas the raceway inserts shall be of plastic (poly Acetal). The raceway covers shall be made of 0.8mm thick CRCA sheet. Wire manager cap on the table top shall be made of ABS material

HIGH BACK CHAIR Adjustable Seat Height, Armrest, Locking Mechanism, Seat Lock, Swivel, Wheels, Head Support W x H : 63 cm x 114 cm Frame Material : Sold Wood Upholstery Type : Cushion Diy : Basic assembly to be done with simple tools by the customer, comes with instructions.

AUDIO PODIUM Audio Podium is best suited for use in conference rooms, auditoriums, classrooms, offices, banquet halls, restaurants, valets, and other public spaces. Includes gooseneck dynamic microphone and gooseneck LED lamp, one tweeter with Built-in 60-watt amplifier and high quality speakers. The podium is 43 inch in height which makes it accessible for almost every person of average height to have a clear view of the audience in front.Smart & Robust design with two VHF handheld wireless mic with range 15-20M, One Button ON/OFF, Built in Control Panel, 1 AUX input independent control, Short circuit clipping and high temp protection, 24V phantom power, 3 MIC input independent control. Minimalist design to compliment any room décor or stage set. It has an attractive look and eloquent design.

DIGITAL PODIUM * Combination of plastic, steel and other materia. ABS plastic is used for the front face of the table. *The top sliding cover is attached with wooden grain boards. * Expand IC card system with eletronic lock and open the lock by swiping the card. *Desktop tilting design, easy to place laptop or speech manuscript. * Electric lifting for wide screen LCD sIZE 21.5". * Built in 8 ports PDU(Industrial PDU special for Rack USAGE * HDMI cable 3-meterx1; USB cable 2 meterx2 *Directly inserted lotus head gooseneck microphone anti-vibration plastic rubber ring base. *Movable caster are provided at the bottom. * Priduct Size: lenghth 668* width 771* height 1150mm

SLOTTED ANGLE RACK @900LX600DX2100HT. Slotted Angle Rack Supply and installation of slotted angle rack Slotted angle- Slotted angle is made up 2mm thick CRCA sheet confirming the IS grade IS 513:2008 coated with final finish consisting of epoxy polyester powder coat of approved color & shade with a Dry Film Thickness of minimum 50 to 60 microns. Angle length is equivalent to the height of the storage which is approx. 2100mm or 1830mm Shelf-Is made up of 0.8mm CRCA sheet confirming the IS grade IS 513:2008. All the four edge is having a bend of 25mm. Shelf is supported by T-Hat in the middle portion. T-hat is made up of 0.8mm CRCA sheet confirming the IS Grade IS 513:2008.Each shelf is having loading carrying capacity of 18kg UDL and total load carrying capacity of unit is 50kg UDL. Finish- The bodies including shelves are given anti-rust surface treatment & are powder coated with epoxy polyester powder. It involves an Oxsilan pre-treatment consisting of Hot water degreasing, cold water rinse I & cold water rinse II, iron phosphate, cold water rinse, and passivation & dry off oven treatment. Final finish consists of epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of 50 to 60 (+\- 5) microns. The material is then oven baked with a controlled temperature of 180 deg.C to 200 deg.C. Fasteners:- Assembly is done with the help of M8 NUT nuts & HEX BOLT M8 X 16.

MAGAZINE RACK SINGLE SIDED WOODEN WITH METAL SLANTER @ 900W X 450D X 1800HT MM. 1.WOODEN STRUCTURE IS MADE UP OF 18mm THK PRELAM PARTICLE BOARD. 2. MAGAZINE SHELVS ARE MDE UP OF 1.2mM THK MS SHEET.

News paper reading stand MaterialAcrylonitrile Butadiene Styrene ColourNickel Grey & White Is Assembly RequiredYes Mounting TypeFloor Mount Weight19 Kilograms Product Dimensions90D x 90W x 60H Centimeters DURABLE DESIGN - Manufactured from prime quality CRCA steel tubes & sheets, NPS-01 Newspaper and Magazine Rack is extremely robust and sturdy. H-type cross bracings combined with leveling bolts at the bottom provide unmatched strength and stability to the product, even on uneven floor EASY INSTALLATION - The Newspaper Stand (reading tops and structure) is shipped in a dismantled state and can be easily assembled on-site without any hassles. A combination of intelligent design and standard hardware & joints not only make the assembly process easy but also make this stand highly portable and easy to storeGREAT UTILITY - NPS-01 Newspaper Rack consists of 2 inclined reading tops mounted on a metallic structure and offers ample space to keep magazines, newspapers, brochures, catalogs or other print & advertisement media. A large display area and heavy-duty design makes this product ideal for schools, colleges, hotels, offices, libraries as well as public areas PREMIUM FINISH - The structure is epoxy powder coated in soothing Grey color and the reading tops are manufactured from prelaminated MDF in Grey color, to suit all contemporary presentation environments. All pipe ends are properly fitted with molded ABS end caps to give the product appealing aesthetics, superior finish and longevity SAFE PACKAGING - Just sit back and relax after you've placed the order, as NPS-01 Newspaper Rack is shipped in a customized heavy-duty and transit-worthy packaging exclusively designed for e-commerce shipments. Your package comes complete with the product, installation hardware and assembly manual

Signages Provinding and fixing signages of various size as per design of whit 6 mm imported acrylic sheet with laser cut vinyl ltters over acrylic sheet including all lead,lift and necessary fixtures required etc complete.

Logo Provinding and fixing maharashtra government/department logo using wood platic composite or equivalent with exteriror colur and polish in size 6 feet x 2 feet

Dust Bin Supplying Dust Bin of Polypropelene material 10 lit

Door Mat Supplying Door mat of size 3 feeet x 2 feet

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 250 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 42.30 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 425 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 320 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 54.89 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 480 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG

Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 200 kVA up to 250 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.

Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 250 kVA up to 320 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.

Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI

Supplying and erecting copper strip of high purity required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint with joints required. As per specification no. EAEP.

Supplying and erecting G.I. strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP).

Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.

Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuitbreaking capacity (Icn) 10kA in provided distribution board as per specificationno. SW-SWR/MCB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB),SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) asper specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 12 ways /phase (36 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways /12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 12 ways /36 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying and erecting blanking plate of suitable size on MCBDB.

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Providing & erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & commissioning 2 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & commissioning 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & commissioning 4 pole RCCB 40A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying and erecting quartz electronic time switch having 24 hour dial to work on 250 V 50 cycle AC having built in rechargeable nickel cadmium batteries to run the time switch on failure of supply having switch contact rating up to 16A to use independently or in conjunction with contactor.

Supplying and erecting four pole power contactor 430 V, 16 A for time switch complete erected on provided wooden block/ box, with necessary materials.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying and erecting PVC box trunking of size 100x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (NOTE 3)

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.as per specification No: WG-MA/BW

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.as per specification No: WG-MA/BW (NOTE 3)

Supplying and erecting mains with 3x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete

Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 4 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 8 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match thebackground

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Point wiring for light/bell/exhaust fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WGPW/SW.

Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing ncapping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW

Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty. (576 + 288 Toilet)

Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary.

Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size.

Supplying & erecting 3W, 230V integral type LED Lamp suitable for B-22 / E-27 base.

Supplying and erecting LED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty

Supplying and erecting LED Strip light 5m Length Max. 45 W IP20 class having minimum lumens output of 800 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f.>0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50, including driver with 1 year warranty

Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for 4W-6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with 1 year warranty.

Supplying & erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt, CRI>80, CCT of 6500K and THD<=20% having useful life of minimum 25000 hrs. with overheating protection with 2 years warranty.

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab.

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width & 75 mm height complete with necessary coupler plates & hardware.

Supplying, erecting, testing and commissioning of 20kVA capacity online pure sine wave, with backup time of 0.5 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, 3 phase input and 3 phase output complete with all protections as per specification no. AP-UPS

Supplying and erecting 12V/42Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supply, Installation, testing and commissioning of cubical type MV Panel conform to IEC:61439-I as per technical specifications,single line diagram & approval of Drawings prior to manufacturing, packed in wooden crates with PVC sheets inner packing, transport to site, compartmental cubicle type freestanding with appropriate cable entries, front operating, front maintained wherever required complete with base frame etc. erected in 14 gauge CRCA sheet and surface treated with phosphating seven tank process and duly powder coated with MSEDCl approved color, feeder piller should be with supporting angles, self-locks, gasket and slanting top to be erected on provided foundation Panel Details :- Name - Utility Panel Girls and Boys Hostel Duty -Duty: Indoor Type (IP 42) Incomer-1 Nos of 315A FP MCCB, Busbar - 315A TPN Al Busbar Outgoings - 13 Nos of 63A TP MCCB, 2 Nos of 100A TP MCB 3 Nos of 16A TP MCB,

Supply, Installation, testing and commissioning of cubical type MV Panel conform to IEC:61439-I as per technical specifications,single line diagram & approval of Drawings prior to manufacturing, packed in wooden crates with PVC sheets inner packing, transport to site, compartmental cubicle type freestanding with appropriate cable entries, front operating, front maintained wherever required complete with base frame etc. erected in 14 gauge CRCA sheet and surface treated with phosphating seven tank process and duly powder coated with MSEDCl approved color, feeder piller should be with supporting angles, self-locks, gasket and slanting top to be erected on provided foundation Name - Utility Panel Office Bldg Duty -Duty: Indoor Type (IP 42) Incomer-1 Nos of 315A FP MCCB, Busbar -315A TPN Al Busbar Outgoings - 8 Nos of 63A TP MCCB, 13 Nos of 40A TP MCB 6 Nos of 25A TP MCB,

Supply, Installation, testing and commissioning of cubical type MV Panel conform to IEC:61439-I as per technical specifications,single line diagram & approval of Drawings prior to manufacturing, packed in wooden crates with PVC sheets inner packing, transport to site, compartmental cubicle type freestanding with appropriate cable entries, front operating, front maintained wherever required complete with base frame etc. erected in 14 gauge CRCA sheet and surface treated with phosphating seven tank process and duly powder coated with MSEDCl approved color, feeder piller should be with supporting angles, self-locks, gasket and slanting top to be erected on provided foundation Name - Utility Panel Museum Bldg Duty -Duty: Indoor Type (IP 42) Incomer-1 Nos of 20A FP MCCB, Busbar -200A TPN Al Busbar Outgoings - 10 Nos of 40A TP MCB, 7 Nos of 25A TP MCB, 3 Nos of 6A TP MCB 4 Nos of 10A SP MCB

Supply, Installation, testing and commissioning of cubical type MV Panel conform to IEC:61439-I as per technical specifications,single line diagram & approval of Drawings prior to manufacturing, packed in wooden crates with PVC sheets inner packing, transport to site, compartmental cubicle type freestanding with appropriate cable entries, front operating, front maintained wherever required complete with base frame etc. erected in 14 gauge CRCA sheet and surface treated with phosphating seven tank process and duly powder coated with MSEDCl approved color, feeder piller should be with supporting angles, self-locks, gasket and slanting top to be erected on provided foundation HVAC Panel Incomer: 250A FP MCCB Busbar: 250A AL busbar. Outgoing: 3 No of 40A TP MCB 10 Nos 25A FP MCB 3 Nos 16A FT MCB

Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. AP-WCR/WC

Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)

Supplying & erecting Dewatering Monoblock pump set 415V, 3 phase, 50C/s, A.C. supply of 2.25KW/ 3 H.P., of 12 to 26 m head with 560 to 70 LPM discharge, 10.5mm Solid Handling Capacity, non clogging minimised abrasive wear, large impeller clearance & maintenance free pump set with water proof cable duly sealed with epoxy material built in protection to prevent the motor from burn out due to abnormal operation. specially designed high efficiency motor with F class insulation & the pump mechanically sealed in the oil chamber,. etc. complete as per specification no. DWP- SMP

Supplying & erecting D.O.L Starter suitable for 415 V, 3 phase 50 cycles with no volt coil and overload element with necessary materials and connected to supply up to 7.5 H.P.

Supplying and erecting pump protection relay comprising current sensing phase failure and UV+OV relay with dry run and overload protection suitable for 3 phase pumps.

Supplying & erecting Water level controller 230/415 V, A.C. , Two way under ground tank operation only.

Supplying & erecting Water level controller 230/415 V, A.C. , Four way under ground & Over head tank operation only.

Supplying & erecting PVC coated 5 mm dia. Brass sensor/ electrode duly wired with nuts & bolts complete (Set of 3 Nos)

Supplying and erecting non return valve 25 mm dia in position made of gun metal complete.

Supplying and erecting non return valve 50 mm dia in position made of gun metal complete.

Supplying and erecting non return valve 65 mm dia in position made of gun metal complete.

Providing & Fixing 40mm dia. Y Strainer (screwed / flanged) with stainless steel fin wire mesh perforated sheet basket with necessary flange / uionons nuts, bolts and wahsers complete as required. All work Complete as per direction of the Engineer-in-Charge. (R.A CPWD Electrical -2018,16.7.4.8)

Providing & Fixing 50mm dia. Y Strainer (screwed / flanged) with stainless steel fin wire mesh perforated sheet basket with necessary flange / uionons nuts, bolts and wahsers complete as required. All work Complete as per direction of the Engineer-in-Charge. (R.A CPWD Electrical -2018,16.7.4.7)

Providing & Fixing 65mm dia. Y Strainer (screwed / flanged) with stainless steel fin wire mesh perforated sheet basket with necessary flange / uionons nuts, bolts and wahsers complete as required. All work Complete as per direction of the Engineer-in-Charge. (R.A CPWD Electrical -2018,16.7.4.6)

Supplying, fixing, testing and commissioning of following sizes 65mm dia Motorized Butter fly Valve with CI Body, SS Disc,O - ring and minimum PN-16 pressure rating , conforming to BS 5155, IS 13095, with IP-55 actuator, capable of accepting upto 10V DC , and upto 20mA electric signal and providing similar transduced feedback output to control system as required. (R.A CPWD Electrical -2018, 16.11.3.9)

Supplying, fixing, testing and commissioning of following sizes 50mm dia Motorized Butter fly Valve with CI Body, SS Disc,O - ring and minimum PN-16 pressure rating , conforming to BS 5155, IS 13095, with IP-55 actuator, capable of accepting upto 10V DC , and upto 20mA electric signal and providing similar transduced feedback output to control system as required. (R.A CPWD Electrical -2018, 16.11.3.10)

Supply, installation, testing and commissioning of Skid mounted Hydro-pneumatic system of Vertical in line pump set with Variable Frequency Drive . Domestic Water Supply System For Building - (Location - Pump Room) Capacity per pump - 150 lpm, Head - 60 meter (Approx. 4.5hp /pump) Pump Qty - 3 (2 working +1 stand by / Duty Assist) Siemens switch gear make control panel along with PLC, PID Controller with all necessary cascade system automation, Power & Control MCB, MPCB , Over load \ Under load, SPP \ RPP, Dry run and all necessary pump & voltage protection, Indication lamp, Digital Pressure indicator cum controller. Danfoss make Pressure Transmitter & Pressure switch, Gauge, Pressure Tank etc. Skid for pumpset with Hot deep Galvnised Suction & Delivery Header Plumbing Accessories along with Ball Valve, NRV, Y type Strainer Polycab make power cable for pumpset & Control cable float switch sensor , control cable for sensor etc complete as per direction of Engineer-in-charge. Pumpset & Control Pannel shall be company assembled factory fitted system with test certificate should be submitted. Vendor to submit performance curves and technical catalog of the proposed model for review & approval by consultants.

Supply, installation, testing and commissioning of Skid mounted Hydro-pneumatic Drinking Water Supply System For Building - (Location - Pump Room) Capacity per pump - 125 lpm, Head - 60 meter (Approx. 3.7hp /pump) Pump Qty - 2 (1 working+1 stand by / Duty Assist) Siemens switch gear make control panel along with PLC, PID Controller with all necessary cascade system automation, Power & Control MCB, MPCB , Over load \ Under load, SPP \ RPP, Dry run and all necessary pump & voltage protection, Indication lamp, Digital Pressure indicator cum controller. Danfoss make Pressure Transmitter & Pressure switch, Gauge, Pressure Tank etc. Skid for pumpset with Hot deep Galvnised Suction & Delivery Header Plumbing Accessories along with Ball Valve, NRV, Y type Strainer Polycab make power cable for pumpset & Control cable float switch sensor , control cable for sensor etc complete as per direction of Engineer-in-charge. Pumpset & Control Pannel shall be company assembled factory fitted system with test certificate should be submitted. Vendor to submit performance curves and technical catalog of the proposed model for review & approval by consultants.

Supply, installation, testing and commissioning of Skid mounted Hydro-pneumatic Flushing Water Supply System For Building - (Location - Pump Room) Capacity per pump - 125 lpm, Head - 60 meter (Approx. 3.7hp /pump) Pump Qty - 3 (2 working+1 stand by / Duty Assist) Siemens switch gear make control panel along with PLC, PID Controller with all necessary cascade system automation, Power & Control MCB, MPCB , Over load \ Under load, SPP \ RPP, Dry run and all necessary pump & voltage protection, Indication lamp, Digital Pressure indicator cum controller. Danfoss make Pressure Transmitter & Pressure switch, Gauge, Pressure Tank etc. Skid for pumpset with Hot deep Galvnised Suction & Delivery Header Plumbing Accessories along with Ball Valve, NRV, Y type Strainer Polycab make power cable for pumpset & Control cable float switch sensor , control cable for sensor etc complete as per direction of Engineer-in-charge. Pumpset & Control Pannel shall be company assembled factory fitted system with test certificate should be submitted. Vendor to submit performance curves and technical catalog of the proposed model for review & approval by consultants.

SITC of Electric Traction Passenger Lift with · Rated capacity :- 10 Passenger/680Kg · Floors :- G+12 floor (13 Stops/13 Landings) · Travel :- 44 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.5mps VS · Car/Landing door clear opening of 900 mm wide x 2000 mm high · Clear Car size of 1300 mm wide x 1350 mm deep x 2250mm high · Lift shaft available having clear size of 2000mm wide x 2000mm deep, pit depth-1500mm, Overhead height -4500mmDoors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge.. COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor.Clear Car size of 1300 mm wide x 1100 .mm deep x2000 .mm high

SITC of Electric Traction Passenger Lift with · Rated capacity :- 10 Passenger/680Kg · Floors :- B+G+4 floor (6 Stops/6 Landings) · Travel :- 22.2 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0mps VS · Car/Landing door clear opening of 900 mm wide x 2000 mm high · Clear Car size of 1300 mm wide x1350 mm deep x 2250mm high · Lift shaft available having clear size of2000mm wide x 2000mm deep, pith depth-1500mm, Over height-4500mm Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge.Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge.

SITC of Electric Traction Passenger Lift with · Rated capacity :- 8 Passenger/544Kg · Floors :- G+3 floor (4 Stops/4 Landings) · Travel :- 13.8 mtrs · Location of Lift Machine:- MR/MRL · Rated speed :- 1.0 mps VS · Car/Landing door clear opening of 800 mm wide x 2000 mm high · Clear Car size of .1300 mm wide x 1100.mm deep x 2250mm high · Lift shaft available having clear size of 1900mm wide x 1900mm deep,lift pit depth 1500mm, over height-4500mm Doors type :- COPO/TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves/frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. COP with SS face plate having metallic push buttons with Braille code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor..

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 module duly erected.

Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW

Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Point wiring (1.7.19) Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

Providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm.

Supplying & erecting 22 SWG G.I sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB

Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 4 sq mm copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE

Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI

Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall/cable/conduit with screws complete.

Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Supplying and erecting 12.5 m (clear height) motorized high-mast (Top -150mm, Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN - 10025 S355/E350 & 3mm thickness, with base plate 25 mm thick x OD 520 mm grade as per IS-2062, pole made in single section & submerge arc welded, with lowering & raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 5mm, SG-DG U clamps, double drum with assembly 250 kg, 5x2.5 Sq.mm. flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report/test report of high-mast should be provided as per specifications on provided foundation J type stud/bolts with necessary accessories complete as per specification no. OH?PL/HM (excluding luminaries)

Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 32A TPN MCB incomer, 24hr astronomical time switch with minimum 5 years battery backup, IP 54 and IK10 protection, 25 A TP contactor for automatic switching of luminaires, 2 no. 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box with supporting angles, self lock, gasket and slanting top erected on CC foundation complete.

Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 12.5 m raising lowering high mast).

Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multistra nded copper Industrial cable for voltage grade up to 1.1 kV ( 53 Poles x 7 mtr = 371 m ) ( 2 Highmast 14 mtr x 12 = 168 Total --539 )

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP

Supplying and erecting integrated LED flood light fitting Max. 100W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2.

Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, installation, testing and commissioning of Main fire pump (MFP / EP) suitable for water discharge of 2280 to 2850 LPM at 90 to 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 55kW or of suitable kW capacity for manual / automatic operation and consisting of following (a)Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b)Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c)M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d)Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/EP

Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 90 to 70 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 9.3 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification no. FF-MFP/JP

Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 450 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP

Supplying, installation, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 2280 to 2850 LPM at 90 to 60 m head driven by 76 HP or suitable HP capacity diesel engine at required working speed suitable for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine , exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/DP

Supplying, erecting, testing & commissioning of fire pump control panel (FCP) of cubical construction, floor mounted type, fabricated from minimum 2 mm thick CRCA sheet, compartmentalised with hinged lockable doors, with enclosure protection class IP54, duly powder coated or painted with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003), cable alley, interconnection with suitable size solid copper busbar strip of adequate size for all power connections having switchgears and accessories, mountings and internal wiring with adequate size copper conductor cable, earth terminals, numbering etc. complete in all respect, suitable for satisfactory operation of main fire pump and jockey (pressurisation) pumps (1working+1standby) with necessary accessories, wiring & cabling along with allied accessories with following incoming and outgoings, suitable for automatic & manual operation on 415V, 3 phase, 50Hz ac supply as per specifications the capacity of electric motor driven pump are as follows a. Main fire pump (MFP) having capacity of 22kW 1no (1 working) b. Jockey pump(JP) capacity of suitable capacity 2 nos(1 working +1 standby, alternate run per start in auto mode) comprises of the following features & switchgears: 1. Main incomer FP SFU having rotary handle with HRC fuses of suitable rating. 2. Electrolytic grade copper strips for busbar of suitable sizes for main incomer and branches to motor SFU's, starters & outgoing terminals with necessary accessories like stainless steel nut bolts with spring washers for connections, mounted on required no of epoxy or porcelain support insulators of suitable ratings etc. 3. Individual pump TPN SFU having rotary handle with HRC fuses of suitable rating.

For addition of capacity of main electric motor driven fire pump MFP (1 working) for hydrant system is more than 22kW, add as follows in the basic cost of Item no 13-5-1 towards increased capacity switchgears and motor starters for main & jockey pumps along with necessary accessories for main & jockey fire pumps MFP (1working), JP (1working + 1standby, alternate run per start in auto mode)For main electric motor driven fire hydrant system pump o

For addition of fire sprinkler system to basic fire hydrant system control panel(FCP) which includes one main electric motor driven fire pump MFP (1working) having __kW capacity & relevant capacity jockey pumps, add as follows in the basic cost of Item no 13-5-1 towards increased capacity switchgears busbar and additional motor starters for main & jockey pumps along with necessary accessories with software & hardware for main & jockey fire pumps additional Sprinkler system MFP (1working) @22kW, JP (1working + 1standby, alternate run per start in auto mode) @relevant capacity For main electric motor driven fire sprinkler system pump of 75kW capacity (1Working) & relevant capacity jockey pumps (1working+1standby, alternate run per start in auto mode, add Rs….

for 5.5/ 7.5 kW centrifugal type booster pump 1no (1working), add Rs…....

Supplying & erecting D.O.L Starter suitable for 415 V, 3 phase 50 cycles with no volt coil and overload element with necessary materials and connected to supply up to 7.5 H.P.

Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 200 mm dia with necessary fittings complete as per specification no. FF-PP

Providing coating of bitumen paint & 4mm thick wrapping for underground 100 mm ring main of fire fighting system.

Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system.

Providing coating of bitumen paint & 4mm thick wrapping for underground 200 mm ring main of fire fighting system.

Excavating hard murum / stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.

Supplying and erecting 75/80 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 150 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 200 mm dia Cast Iron end line strainer of T-Pot type flanged end pattern, PN16 pressure rating, screen of SS and end connection with flanged, for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 75/80 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting 100 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting 150 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting 200 mm dia. cast iron double flange sluice valve complete with PN16 pressure rating, as per specification no. FF-VL/SV

Supplying and erecting 50 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 65 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 200 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 75/80 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 75/80 mm dia cast iron double flange ball type NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 100 mm dia cast iron double flange ball type NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 150 mm dia cast iron double flange ball type NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 200 mm dia cast iron double flange ball type NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 20 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting 50 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV

Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FF-FFA/NZ

Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC

Supplying and erecting fire brigade header ( Siamese connection )of 150 mm dia, for supplying water in fire tank complete as per specification no. FF-FA/FMC

Supplying and erecting 300 mm dia 1.5m in height air vessel / tank fabricated from min 5mm thick M.S. sheet complete as per specification no. FF-FFA/ACT

Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV

Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP

Supplying and erecting M.S./CRCA cabinet for housing Fire Brigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)

Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR.

Supplying, erecting, testing and commissioning vane type water flow detector 75/80 mm dia. with 1)Visual switch activation, 2)Rugged switch assembly, 3)Heavy duty aluminium pipe saddles, 4)Durable metal enclosure, 5)Steel U bolts for secure mounting, 6)Two SPDT (Single pole double track) synchronised switches, 7)serviceable without draining pipes.

Supplying, erecting, testing and commissioning vane type water flow detector 100 mm dia. with 1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.

Supplying and erecting fire resistant mortar (20 kg) with fire resistance class S90 as per National Electrical Code (NEC) SP30-2011 suitable to seal the openings of all kinds of cables, pipes and cable support system in steel, aluminium and plastic profiles ( except hollow core conductors). The residual openings shall be closed with filler, as per specification no FF-FRM.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

Supplying, installation, testing & commissioning of Sprinkler Flexible Pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar. The hose assembly includes 1500 mm long, 28 mm diameter corrugated stainless steel flexible hose with a braided stainless steel exterior.complete all the work up to the satisfaction of the Engineer in charge.(R.A. CPWD Electrical 18.25.3)

Supplying, installing, testing, and commissioning standard response Pendent / Upright type sprinkler (Standard coverage) quartzite bulb type with 15mm screwed end connection of 68 deg. C.tempersture rating K-80 and orifice shall not be less than 6mm sprinklers shall be UL listed approved with chrome finished. complete all the work up to the satisfaction of the Engineer in charge. (R.A. CPWD Electrical 18.21.2)

Supplying, installing, testing, and commissioning standard response Sidewall sprinkler (Standard coverage) quartzite bulb type with 15mm screwed end connection of 68 deg. C.tempersture rating K-80 and orifice shall not be less than 6mm sprinklers shall be UL listed approved with chrome finished. complete all the work up to the satisfaction of the Engineer in charge. (R.A. CPWD Electrical 18.21.3)

Providing and fixing 150 mm dia installation valve with Hydraulic trim type automatic alarm to be connected with control valve drain and test valve as per manufacturer's recommendations . with accessories like water motor gong bell, Test & drain valve , Flow switch etc UL listed etc complete to satisfaction of Architect/ PM (R.A.CPWD WR (2019) 21.3)

Supplying, installing, testing, and commissioning of portable fire extinguishers of ABC dry powder stored pressure type fire extinguishers of 6 Kgs.capacity Complete with standard discharge valve with tube, CI bracket for wall mounting etc. complete as per confirming to IS : 15683 complete all the work up to the satisfaction of the Engineer in charge.

Supplying and erecting of Fire Exit, Fire Hydrant,Hose Box, MCP, Hooter, Fire Alarm Control Panel & Fire Exinguisher signage Indicating the detail (FIRE SIGNAGES)

Providing, laying, testing & commissioning of 80mm dia resilient rubber neoprene lined single arch Vibration eliminators (Expansion bellows) suitable for Design Pressure 16 kg/sq cm and test pressure 24 kg/sq cm. complete all the work up to the satisfaction of the Engineer in charge.

Providing, laying, testing & commissioning of 150mm dia resilient rubber neoprene lined single arch Vibration eliminators (Expansion bellows) suitable for Design Pressure 16 kg/sq cm and test pressure 24 kg/sq cm. complete all the work up to the satisfaction of the Engineer in charge.

Providing and fixing 25 mm dia Inspection & Testing Assembly with 25mm gunmetal ball valve, gun metal sight glass bypass valve & connected to drain line etc complete as per drawing.

Supplying, erecting testing and commissioning beam smoke detector four wire single ended reflected type with 8 " receiver having digital display for easy alignment, adjustable sensitivity & heater kit for transmitter/receiver and reflector with necessary connections on suitable back box. The protection range of beam detector is 5 to 70 m.

Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI

Supplying, installing, testing and commissioning FRLS, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, installing, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 2 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP.

Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the 4 loop capacity and capable of supporting upto 250 devices and detectors per loop, with on-board LCD display with min 16 lines of text, operating at 230 V 50 HZ - AC with inbuilt Battery Backup of a minimum 24 hours in normal condition and 30 min in alarm condition, suitable provision for network connectivity, interfacing with third party equipment via a MODBUS/ OPC/ L-ON interface etc. conforming to IS 15908:2021, ,IS 2189: 2008, EN 54 & VDS / FM/ UL 864 (10th edition) with 3 years replacement warranty FF-AFAS/CP.

Supplying, installing, testing and commissioning of repeater panel with suitable battery backup of a minimum of 24 hours in normal condition and 30 min in alarm condition, 80 backlit alphanumeric LCD display with inbuilt buzzer to indicate fault/fire alarm, manual control keys for silence/mute and to reset the FACP from the repeater station. Panel size shall not more than 175 x 275 x 65 mm conforming to EN 54 or UL approved with 3 years equipment replacement warranty FF-AFAS/RP

Supplying, installing, testing and commissioning of addressable optical smoke detector, single/twin LED’s with 360 degree view, suitable for low voltage 15 to 32 V DC two wires supply, in-built locking mechanism to check the removal and pilferage of the detector, in built isolation mode, start up current 300µA and alarm condition current shall be maximum 6.5 mA, operating temperature 0°C to 50°C, humidity 0-95% RH, IP 41, conforming to IS 2189: 2008, 11360_1985_Reff2020 EN 54 or UL Approved with 3 years equipment replacement warranty FF?AFAS/SD .

Supplying, installing, testing and commissioning of intelligent addressable thermal / heat detector with rate of rise cum fixed temperature thermistor complete with base as required, suitable for temperature variations from -20°C to 38°C for fixed-heat and rate-of-rise type detectors and 0°C to 66°C for high heat type detectors, in built isolation mode, suitable for offices/ceiling cable trenches/less ventilation area's etc. with 3 years equipment replacement warranty IS : 2175 - 1988 reaffirmed 2000, IS 15908:2021 standards FF-AFAS/SD.

Supplying, installing, testing and commissioning of addressable manual call points ( break glass type/pull station type), made of addressable break glass plastic square in shape surface/flush mounted with "Break Glass" massage embedded on the glass, complete erected with mounting base and required accessories conforming to EN 54 or UL listed with 3 years equipment replacement warranty FF-AFAS/MCP.

Supplying, installing, testing and commissioning of addressable fire control/relay module complete as required, with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 reed relays, EN 54 or UL Listed FF-AFAS/CRM

Supplying, installing, testing and commissioning of addressable fire monitor module complete as required. EN 54 or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/MM

Supplying, installing, testing and commissioning of addressable fire isolator module complete as required. EN 54 /FM or UL Listed with 3 years equipment replacement warranty conforming to IS 5051Part 2 (Sec 1 to 3) : 1982 Reed relays FF-AFAS/ISM

Supplying, installing, testing and commissioning of addressable horn cum strobe sound/ hooter, output frequency 500 to 1000 Hz with dB as per Chart given in IS 15908:2021, with flashing at 1 Hz over the strobe’s entire operating voltage range EN 54, conforming to IS 2189: 2008, IS 15908:2021 standards with 3 years equipment replacement warranty FF-AFAS/SSH.

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON.

Supplying and fixing 17U floor mount rack (Dimension-DxWxH – 800x600x954mm) as per specification No. WG-NAS/RAK

Supplying, erecting, testing and commissioning of 1.5 sq. mm speaker wire complete.

Supply, installation, testing & commissioning of 6 Watt Cone type Ceiling Mounted metal grill Speakers with line matching transformer, Power tapping: 1.5W/3W/6W, Frequency response: 100-20000 Hz. SPL (1W 1m) 92 dB, including screw clamp mounting with required accessories. (Colour - White)

Supply, Installation, testing and commissioning of 6 Watt Box type Wall / Surface Mount Speaker with line matching transformer, Power tapping: 1.5W/3W/6W, ABS or metal body, Frequency response: 100-20000 Hz. SPL (1W 1m) 92 dB, including required mounting accessories.

Supply, Installation, testing and commissioning of 10 Watt column/wall mount Projector Speaker (uni directional) with line matching transformer, Power tapping: 5W/10W, fire protected ABS or Metal cabinet, includes a steel U-bracket, with adjustable inclination and easy installation with required accessories.

Supply, installation, testing & commissioning of 6 Zone Voice Alarm PA Controller with built in audio message generator (multi message), 6 Zone 70/100V live outputs for Speaker circuit, Fireman Microphone, Pre-recorded evacuation messages, Should be able to send 2 different pre-recorded messages simultaneously (message should be in 2 languages English & Hindi), Phased evacuation, 6 supervised input contact relays for integration with Fire Alarm Control Panel, Up to 6 call stations can be connected together with controller. The controller should integrates multiple functions such as audio storage, playback, zone control, audio monitoring, scheduled broadcast and fault diagnosis, audio playing, zone control, fault monitoring, log recording, volume control and amplifier switchover etc. complete with cords, connectors & required accessories.

Supply, installation, testing & commissioning of 480 Watt, high efficiency Power amplifier, 70/100V loudspeaker output voltages, RMS output power limiter, high temperature, DC, short circuit, mains undervoltage protection, DC supply undervoltage protection, inrush current limiter with cords, connectors, power supply & required accessories.

Supply, installation, testing & commissioning of 240 Watt, high efficiency Power amplifier, 70/100V loudspeaker output voltages, RMS output power limiter, high temperature, DC, short circuit, mains undervoltage protection, DC supply undervoltage protection, inrush current limiter with cords, connectors, power supply & required accessories.

Supply, installation, testing & commissioning of Audio Music Player with built in USB port, SD card, support MP3 & other audio formats, complete with cable, cords & required accessories.

Supplying, installing, testing and commissioning split type variable speed inverter technology room Air conditioning unit 1.1 TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50Hzs, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete with Refrigerants R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer ferr operation & temperature display on indoor unit, noise level max. 50dBA at position ( IDU & ODU mounting stands) as per specification no. APAC/ WAC

Supplying, installing, testing and commissioning split type variable speed inverter technology room Air conditioning unit 2.0 TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50Hzs, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete with Refrigerants R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer ferr operation & temperature display on indoor unit, noise level max. 50dBA at position ( IDU & ODU mounting stands) as per specification no. APAC/ WAC

Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS complient suitable for refrigerant system having 22SWG thickness and inner dia / size 16 mm complete.

Supplying, erecting, testing and commissioning of 14HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 22HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/ digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type room / indoor unit (IDU) of nominal capacity 1.8TR (594 cfm) to 2.2TR (655cfm) having EER asper BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, inbuilt drain pump, expansion device, cordless remote control with necessary controls with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for wall mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installation complete.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.6TR (918 cfm) to 2.8TR ( 1100 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 way cassette room / indoor unit (IDU- compact / standard size) of nominal capacity 4.1TR (1218 cfm) to 5.0TR (1624cfm) having EER asper BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant piping, cordless remote control and fresh air post etc. IDU shall have anti-corrosive coating suitable for coastal area in all respetcs suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation complete.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 2 way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.8TR (1130 cfm) to 3.7TR ( 1377 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supplying, erecting, testing and commissioning centralised programmable remote control panel (HMI) touch manager controls minimum 16 systems of 64 ODU's can be controlled and up to 992 IDU's can be individually mounted and controlled indoor units, having colour min 200mm size LCD touch panel, yearly schedule, power proportional distribution function, temperature limitations, history function complete erected on wall integrated with provided fire alarm system.

Supply, fabrication, installation and testing of flexible canvas connections constructed between ductable unit / dampers / ducting of suitable size with fire resist flexible double canvas sleeve complete.

Providing and applying of adhesive thermal insulation for supply return air duct with 19mm nitril rubber insulation having R-value as per the prevailing provisions in ECBE-2017.

Providing and applying of acoustic insulation for air duct with 25mm thick, 48kg/cu.m fiber glass faced with RP tissue and covered with 26 SWG perforated aluminium sheeets complete.

Supplying and installatiing of collar damper of GI material of upto 120 microns for anti corrosive resistance for supply air grill of suitable size.

Supplying and installatiing of high pressure grade required size copper connection Y or T - joints / refnet complete erected on wall/ ceiling with supports/raceways, nitrile rubber insulation, painting, etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditing system,

Supplying and erecting aluminium powder coated linear grill of suitable size for width length without coller dampers having matching colour with the existing false ceiling and suitable for deflection of 15॰/30॰/45॰, (150mm height)

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6mm dia. (OD) for liquid line / suction line of suitable gauge ( hard pipe for liquid main line and soft copper pipe for refrigerant along with necessary supports, hanger,s clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damage,s fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV / VRF air conditioning system complete.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2mm dia. (OD) for liquid line / suction line of suitable gauge ( hard pipe for liquid main line and soft copper pipe for refrigerant along with necessary supports, hanger,s clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damage,s fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV / VRF air conditioning system complete.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1mm dia. (OD) for liquid line / suction line of suitable gauge ( hard pipe for liquid main line and soft copper pipe for refrigerant along with necessary supports, hanger,s clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damage,s fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV / VRF air conditioning system complete.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9mm dia. (OD) for liquid line / suction line of suitable gauge ( hard pipe for liquid main line and soft copper pipe for refrigerant along with necessary supports, hanger,s clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damage,s fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV / VRF air conditioning system complete.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia. (OD) for liquid line / suction line of suitable gauge ( hard pipe for liquid main line and soft copper pipe for refrigerant along with necessary supports, hanger,s clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damage,s fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV / VRF air conditioning system complete.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5mm dia. (OD) for liquid line / suction line of suitable gauge ( hard pipe for liquid main line and soft copper pipe for refrigerant along with necessary supports, hanger,s clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damage,s fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV / VRF air conditioning system complete.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting GI sheet 0.8 mm (22 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint. ( Ducting = 22G )

Supplying and erecting GI sheet 0.6 mm (24 SWG) having zinc coating of 275 microns with galvanization process compliance to IS 2629:1985 to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, rivetin (Ducting = 24G )

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting tile type modular diffuser made from aluminium sheet with powder coated matching to the ceiling shade for provided supply and return air complete.

Supply, Installation, Testing & Commissioning of outdoor type floor mounted Double skin AHU comprising of 48 mm thick panel filled with PUF, DIDW backward curved / airfoil fan with 2 ply fire retardant canvas at the outlet ,complete with suitable motor and mounting arrangements on common rail anti vibration mount, thermal break profile, Return air mixing chamber with fresh air and return air aluminum dampers, DX type Cooling Coil - 2 circuits with capillery header / Electronic Expansion Valve to be connected with VRF/VRV ODU system, SS insulated drain pan, Inlet Filter EU-5, doors with proximity switch for inspection lamp and AHU stop, including volume control damper and motorized fire damper with fire test control panel at AHU outlet installed, PLC based Control logic Panel with possibilty of third party BMS connectivity for remote operation, etc. The AHU shall have starter panel interconnected with fire panel for fire mode operation Capacity = 10500CFM / 50mmWg / 21.7TR

Supply, Installation, Testing & Commissioning of ceiling suspended Double skin AHU comprising of 48 mm thick panel filled with PUF, DIDW backward curved / airfoil fan with 2 ply fire retardant canvas at the outlet ,complete with suitable motor and mounting arrangements on common rail anti vibration mount, thermal break profile, Return air mixing chamber with fresh air and return air aluminum dampers, DX type Cooling Coil - 2 circuits with capillery header / Electronic Expansion Valve to be connected with VRF/VRV ODU system, SS insulated drain pan, Inlet Filter EU-5, doors with proximity switch for inspection lamp and AHU stop, including volume control damper and motorized fire damper with fire test control panel at AHU outlet installed, PLC based Control logic Panel with possibilty of third party BMS connectivity for remote operation, etc.The AHU shall have starter panel interconnected with fire panel for fire mode operation Capacity = 6500CFM / 50mmWg / 21.6TR

Supply, Installation, Testing & Commissioning of ceiling suspended Double skin AHU comprising of 48 mm thick panel filled with PUF, DIDW backward curved / airfoil fan with 2 ply fire retardant canvas at the outlet ,complete with suitable motor and mounting arrangements on common rail anti vibration mount, thermal break profile, Return air mixing chamber with fresh air and return air aluminum dampers, DX type Cooling Coil - 2 circuits with capillery header / Electronic Expansion Valve to be connected with VRF/VRV ODU system, SS insulated drain pan, Inlet Filter EU-5, doors with proximity switch for inspection lamp and AHU stop, including volume control damper and motorized fire damper with fire test control panel at AHU outlet installed, PLC based Control logic Panel with possibilty of third party BMS connectivity for remote operation, etc.The AHU shall have starter panel interconnected with fire panel for fire mode operation Capacity = 5000CFM / 50mmWg / 10TR

Supply, installation, testing and commissioning of Vane Axial Smoke Exhaust Fans with Sound Attenuators, complete with drive and Supports system with vibration isolators. Fire rated H Class motor, 300 deg.C at 2 Hr. Motor shall be suitable for 415 ± 10% volts, 50 cycles, 3 phase AC supply and shall have high efficiency motors, with all supporting structures and accessories, waether proof external exhaust louvers. Sound level shall not be more than 55 dBA from 3 m AMCA Certified only. For auditorium and multipurpose hall Capacity = 8300CFM / 20mmWg

Supplying, erecting, testing & commissioning exhaust air system, ductable circular inline exhaust air fan inlet unit having 500 cfm capacity with maintaining the static pressure minimum 30mm suitable to operate on 1ph, 230 V, 50Hz, A.C. supply complete.

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting 25 mm dia. corrugated flexible polypropylene conduit

Supplying and erecting PVC box trunking of size 100x50 mm. with accessories on wall/ceiling as per specification No: WG-MA/BOX .

Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box.

Supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW

Supplying & erecting 5 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW

Supplying & erecting 20 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW

Supplying & erecting 50 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW

Supplying & erecting 100 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW

Supplying & erecting 0.5 mm dia, copper jumper wire as per specification No. WG-TW

Supplying & erecting co-axial copper cable low voltage grade tri-shielded RG-6 as per specification No. WG-TW

Supplying and erecting 5m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying and erecting 10m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying and erecting 15m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying and erecting 20m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying and erecting 25m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying, erecting & commissioning MDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying, erecting & commissioning MDF Box 150x150 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying, erecting & commissioning MDF Box 500x500 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying, erecting & commissioning 10 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW

Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification no. WG-TW

Supplying, installing, testing & commissioning IP EPABX for 10 extensions complete.

Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete.

Supplying, installing, testing & commissioning IP telephone instrument as per specification complete.

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC

Supplying and installing cat-6 armoured cable with ECCS tape suitable for networking as per specification No. WG-COC/NC

Supplying and erecting LSZH armoured multimode optical fibre cable with 6 fibres, core dia 50/125 μm (OM3), suitable upto 10 GBPS, ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification no. WG-COC/OFC LSZH

Supplying and erecting LSZH armoured multimode optical fibre cable with 12 fibres, core dia 50/125 μm (OM3), suitable up to 10 GBPS ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC

Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying and fixing 2 m UTP patch cord of cat 6 type in position as per specification No. WG-COC/PC

Supplying and plugging 3 m fibre patch cord LC-SC MM (50) OM3 LSZH duplex complete as per specification no. WG-COC/FPC

Supplying, fixing, and configuring 8-ports managed gigabit, Layer-2 switch, 10/100/1000 base-T, POE smart switch plus 2 SFP erected in provided rack complete.

Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WGNWC/GBS

Supplying, fixing, and configuring 20 (1G-RJ45) ports + 4 combo 1G ports + 4 10G (SFP+) ports, Layer 3 switch, SI Image, 6KV surge protection on ethernet port and console port for management erected in provided rack complete.

Supplying, fixing, and configuring 24 ports + (4 SFP+) POE switch, 370W, 6KV surge protection on ethernet port and console port for management on provided rack as per specification No. WG-NWC/ENS

Supplying, fixing, and configuring 10G Base -SR (SFP+) simplex MM transceiver erected in provided rack complete.

Supplying, fixing, and configuring modularised multi-service router 802.11/a/n/ac unified Wave 2.5 GHz, with RJ-45 port, supporting 1 to 13 channels for 2.4 GHz, with unified wireless access point complete.

Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.

Supplying and fixing Tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixing 12 ports light guide unloaded interconnect unit,rack mounted type, with adapter panel for termination of optical fibre cables in provided U rack complete as per specification no. WG-NAS/ LIU

Supplying and fixing SC/LC type multimode pigtails (OM3) for LIU to terminate OFC in LIU as per specification No. WG-NAS/LIU2

Supplying and fixing Power Distribution Unit for networking rack comprises of 6/16A (6 Nos. sockets), 25 A modular MCB, appropriate rating fuse and indicator lamp, enclosed in black powder coated metal with necessary arrangement for fixing as per specification No. WG-NAS/RAK

Supplying and fixing 15U wall mount rack (Dimension-DxWxH – 500x600x767 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 22 U floor mount rack (Dimension-DxWxH – 800x600x1176 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 42U floor mount server rack (Dimension-DxWxH – 800x600x1866 mm) as per specification No. WG-NAS/RAK

Supplying and fixing 9U IP66 outdoor mount server rack with pole mount bracket (Dimension- DxWxH - 500x600x450 mm) as per specification No. WGNAS/RAK

Supplying and fixing dual-band manageable wireless 3x3 Mesh Router, high performance, 802.11 n/ac unified, concurrent access point with POE in networking as per specification no. WG-NAS/LAP2

Supplying, installing and activating physical license pack software for multiple access point with management, configuration and trouble shooting for all access point in network complete.

Supplying and fixing 2 m Telephone patch cord of RJ11 type

Supplying and installing, testing & commissioning of Digital (Hybrid) type EPABX of 10 Digital + 450 analog extensions, built in Compatible Software Server, USB Ports, internal Storage upto 64GB, Group Conference facility. Voice Messages, ethernet ports, Universal Slots for Interface expansion Cards, Single Line Analog Telephones port, Trunk line, BRI ports, GSM/3GPorts, SIP Trunks port complete with required accessories. (Make- Matrix / Panasonic / Alcatel or equivalent)

Supply, installation, testing & commissioning of Ceiling Mounted Smart LED Projector- Full HD, 1920 x 1080 Resolution, 3800 ANSI Lumens white/color output, Varifocal lens, 16 watt audio output, 10000:1 contrast ratio, Built-in wireless and miracast, HDMI 2 inputs, VGA, 6000 hours unwoven filter, 12000 hours lamp life, HDCR/Accentualizer, RJ-45 port, including Remote control, power cord, cable, lens cover & required accessories with Ceiling mounted brackets.

Supply & fixing of 150" Diagonal Motorized white Screen for projector with motor, fixing brackets & required accessories.

Supply, installation, testing & commissioning of Smart TV, Wall mount 55" Ultra HD Flat LED TV having minimum 2 HDMI, 2 USB & 1 RJ 45 port, AV port with inbuilt Wi-Fi including wall mount accessories.

Supplying,Erecting,Testing & Commissioning 5 MP Full IP Dome/Bullet Camera Complete. Camera Sensor 1/2.7", 5.0 megapixel, progressive scan, CMOSLens [email protected] Distance 60 Meter DetectShutter Auto/Manual, 1 ~ 1/100000s Colour: 0.01Lux (F2.0, AGC ON)Minimum Illumination 0Lux with IR onDigital noise reduction 2D/3D DNRDay/Night IR-cut filter with auto switch (ICR)S/N >52dBIR Range Up to 30m (98ft) IR rangeWavelength 850nmIR On/Off Control Auto/ManualDefog Digital DefogWDR DWDRVideo Video Compression Ultra 265, H.265, H.264, MJPEGH.264 code profile Baseline profile, Main ProfileFrame Rate Main Stream: 5MP (2592*1944), Max 20fps; Sub Stream: 720P (1280×720), Max 20fpsVideo Bit Rate 128 Kbps~16 MbpsOSD Up to 4 OSDsPrivacy Mask Up to 4 areasROI Up to 2 areasMotion Detection Up to 4 areasImage White Balance Auto/Outdoor/Fine Tune/Sodium Lamp/Locked/Auto2Digital noise reduction 2D/3D DNRSmart IR SupportFlip Normal/Vertical/Horizontal/180°Dewarping NAHLC SupportedBLC SupportedNetwork Protocols IPv4, IGMP, ICMP, ARP, TCP, UDP, DHCP, RTP, RTSP, RTCP, DNS, DDNS, NTP, FTP, UPnP, HTTP, HTTPS, SMTP, SSL, QoSInterface 10/100M Base-TX EthernetCompatible Integration ONVIF (Profile S, Profile T), APICertifications Certifications CE: EN 60950-1/UL: UL60950-1/FCC: FCC Part 15(Include – 12 Month Fully Compressive Warranty

Supply of 64 Channel professinal series 4K HD Network Video Recorder Smart H265+/H265/Smart H264+ Max 320Mbps Incoming Bandwith upto 12MPResolution for Preview and Playback. Bit Rate 16Kbps-20Mbps per channel. 2HDMI/ 2VGA simultaneous video output to enhance the storagereliablity when the network break down, Quad- Core embeded processor. 8 STATA III Ports upto 6 TB for each HDD for 2 RJ45 port (10/100/1000Mbps) independant of joint Networking. Analytical Features like - ANPR, People Count, Face Detection, Missing/ Abonded Objects, Tripwire and Instrsion alarms, Smart FAN to achive high cooling effects. Automatic Network Replenishment (ANR) Technology - Network Video Recorders with ANR function automatically store video data on an IP camera SD card when the Network is disconnected. After recovery of the network, the NVR automatically retrives the video data stored on the camera.

Supply and Installation of 8 TB (7200 RPM) Surveillance hard disk 8 TB storage capacity with SATA support 6GB/s NCQ 64 MB cache 3.5 inches. (for 30 days recording)

SITC of 42" Full HD TV VGA DVL, 2 x HDMI, LAN, 2 x USB RGS In out Avin Component in wit ready 20W speakers professional full HD display complete with mounting hardware and software 200 templete included to create your own content manage content with suggested PC or mobile device A professional display backed by three years onsite/offsite warranty and dedicated B2B support (3 years warranty)

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. calculation attached

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).foundation size for structure 0.3 x0.3x.15x 4nos=.054 for 1 system for 51 nos 500LPM x 0.054=27.54 + for for tank and heat pump tank requre approx 15.2 total=42.74=43cum, 43x3= 129

Supplying, installing, testing and commissioning of ETC solar water heating system without heat exchanger type of 500 LPD capacity with SS water tank of 0.5 mm thickness conforming to IS1239 Part-I :2004 complete as per specification no. ESD-SHWS-ETC (50 no x 500=2500)

Supplying and erecting 20/25 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 2.6 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC

Supplying and erecting 32/40 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 22 mm for solar water heater/AC system.

Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 42 mm for solar water heater/AC system.

Supplying and erecting ISI mark GI pipe 40 mm. dia. ‘B’ class at position with accessories complete as per specification no. CW-PLB/GP.

Supplying and erecting non return valve 40 mm dia in position made of gun metal complete.

Supplying and erecting 40 mm. dia. gun metal sluice valve at position with necessary materials complete.

Supplying, installing, testing and commissioning of Monoblock Heat pump, having dimension: 995 x 785 x 1700 (mm), Input power: 2.22 kW, 400 V, 3 Ph, 50 Hz, Output power: 8 kW having hot water temperature range 35°C to 75°C and ambient temperature range for max. efficiency 7°C to 43°C, with glass lining hot water tank of 455 ltr. and min. 220 Kg at rated pressure 10 bar with two emergency heating elements operated on three operational mode: Efficiency mode, Hybrid turbo mode and Standard mode with Adaptive Energy System (AES), LED display with necessary accessories complete with 5 years ON-SITE warranty.

Supplying & erecting Pressure Booster Pump, single phase, 50C/s, A.C. supply of 0.75 KW/ 1 H.P., With discharge of 480 to 13 LPM for 10 to 50 Mtr Head & 25 mm suction/ 25 mm delivery pipe, for Domestic Pressure boosting applications.

Supplying & erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .

Supplying, installation and testing and commissioning of storage type Mild Steel mixing water tank of capacity 3000 ltrs. tested to a pressure of 8 kg/cm2, insulated with 50 mm thick rock wool with wire mesh around and cladded with 26 SWG aluminium of dish end type with working pressure of 6 kg/cm2, fabricated with 6 mm thick MS plate and dished ends with 8 mm thick plates complete with man hole cover, inner side of the tank coated with FRP coating of 3 mm thickness withstand temperature of 90°C provided with collars of 2" BSP for provision to install 6 numbers of electrical heating coils if required with thermal sensors for automatic operation and integrated into the electrical circuits of the circulation pumps and the heat pump with safety valve drain, inlet and outlet nozzle, pressure gauge with all necessary accessories complete.

Providing and fixing high-density polyethylene (HDPE) container one piece moulded triple layer water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres.

Supplying and erecting chromium plated heavy duty brass stop cock for inlet pipe of water heater (15mm. dia).

Supply, installation, testing & Comissioning of Front-of- House left and right clusters with a 14" LF driver or better and multiple MF/HF drivers (More than 4), Biamplified 2 or 3 Way array loudspeaker system; with Individual Module free field Frequency Range (-10dB) of 55Hz - 18kHz or better & Continuous Power Handling of >= 750W LF + 150W MF/HF. The Loudspeaker module shall have a Max. SPL (Peak) of MF/HF>= 130 or better. It should have Horizontal near dispersion pattern of 80º or better, vertical dispersion of the array shall be 60 degrees or better. with OEM Couling plate for array modules

Supply, installation, testing & Commissioning of a single 18" subwoofer. The louspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 29Hz - 300Hz. It should have an ground stack position Sensitivity of > = 98dB (1W/1m) or more delivering a ground position Max. Calculated SPL(peak) of >=133 dB; Nominal impedance of 4ohm or higher and continuous Power Handling of 750W or more. The loudspeaker system shall be comprised of a Baltic birch plywood enclosure with standard array rigging hardware for Cardioid as well as stacked position.

Supply, installation, testing and commissioning of a two-way dual 6.5-inch or better Frequency Range (-10 dB) of 80Hz - 18kHz or better; Nominal Dispersion : 90°H x 60°V or better; Power handling of 800W peak or more; Sensitivity of 90dB or better; Max SPL : 123dB Peak or more with a Nominal impedence of 8 ohms. Standard wall mount brackets shall be included

Supply, installation, testing & Comissioning of passive coaxial two-way point source loudspeaker with a single 8" LF driver or better. Frequency Range (-10dB) of 75Hz - 20kHz or better & Continuous Power Handling of >= 150W or better. The Loudspeaker module shall have a Max. SPL (Peak) of MF/HF>= 128 or better. It should have Horizontal near dispersion pattern of 110º or better, vertical dispersion of the module shall be 60 degrees or better.

Supply, installation, testing and commissioning of 8 channel class D Networkable Power amplifier with a Max Output Power of 8x500W@8 ohms, or bridged mode output power of 4x 1000W @ 8/4 ohms. 20Hz - 20 KHz, SNR of 102dB and THD + N of <0.4% with built in protection such as Limiters, Temperature, DC, Short Circuit, Peak Current Limiters, Turn on delay etc. Built in DSP for Matrix routing, Speaker equalization, Delays, Array EQs etc complete with Ethernet Port for Network Control, programming and monitoring. Shall offer optional Network audio connectivity (Dante or CobraNet) through expansion slot.

Supply, installation, testing and commissioning of Class D configurable amplifier with total 2 x 1000W output power or better across 2 outputs, 4/8ohms, 70/100 Volt or mixed use operation; Frequency Response : 20Hz - 20kHz for LZ mode ;THD <0.04% at rated output

Supply, installation, testing & commissioning of Gooseneck Microphone with connector XLR3M, Impedance < 100 Ohm, Dimensions L 450 mm (17,72"), Frequency response (microphone) 50Hz - 20 kHz, Transducer principle (Microphone) pre polarised condenser microphone, Pick-up pattern cardioid, Equivalent noise level 26 dB (A), Equivalent noise level weighted as per CCIR 468-3 37 dB, Maximum sound pressure level (passiv) 130 dB SPL, Power supply P48, Current consumption 3 mA, ConnectorMic in: XLR-3F, Mic out: XLR-3M Logic: clip contact for logic, Pin assignment: trigger signal at the logic connector: Logic in (external LED control), GND, Logic out (switch signal), Current consumption 3.7 mA with On/Off Switch

Supply, Installation, Testing & Commissioning of active antenna splitter 2× 1:4 or 1× 1: Frequency range: 470 – 870 MHz at –3 dB, 23 dBm typical Impedance 50 Ω Reflection loss 10 dB (all RF outputs) Power consumption : 245 mA Total power consumption Max. 2A (4 receivers & 2 × 2 antenna amplifiers per antenna input) OEM should have authorized service centre in India

Supply, Installation, Testing & Commissioning of directional antenna with Impedance:50 Ohm; Connector: BNC; Pick-up pattern: directional;Frequency range: 450 - 960 MHz ;Antenna gain: 4 dBi ;Opening angle: +- 50 degrees ; OEM should have authorized service centre in India

Supply, Installation, Testing & Commissioning of cardiod pre-polarised condenser microphone with Frequency response of 20 - 20,000 Hz, Sensitivity of 7 mV/Pa;2.3 mV/Pa / 0.7 mV/Pa(with pre-attenuation), Sound pressure level at 1 kHz of 137/147/157 dB SPL(depending on pre-attenuation)Nominal impedance 100 ohm Min. terminating impedance 1 k ohm OEM should have authorized service centre in India

Supply, Installation, testing and commissioning of cardioid pre-polarized condenser on-table boundary layer microphone with 3-pin XLR and a programmable microphone button for Toggle on/off, PTM, PTT and permanent on features with a bi-color LED ring for status indication and TTL logic connector with logic inputs and outputs, frequency response of 40 Hz - 20,000 Hz or better and sensitivity of 10 mV/Pa or better, nominal impedance at 1 kHz of 200 Ω or better, current consumption of 5.3 mA or better, equivalent noise level of 26 dB(A) or better, dynamic range of 111 dB (A) or better, maximum SPL of 140 dB or better and operating on 48 V phantom power. The logic output voltage shall be high level > 2.4 or better and low level < 0.4 V or better and logic input voltage shall be high level > 2.0 V and low level < 0.8 V.

super-cardioid/interference tube mini shotgun microphone capsule for background noise suppression. a permanently polarized condenser microphone capsule with a hyper cardioid / lobar directivity.with the 15 cm short gooseneck stem, Impedance 50 Ω, Frequency response (Microphone) to be 40 Hz to 20 kHz, Phantom powering P12 to P48, Equivalent noise level 23 dB(A), Equivalent noise level weighted as per CCIR 34 dB(A), Current consumption 250 μA

Supply, Installation, Testing & Commissioning of dynamic cardioid vocal microphone with ON/OFF switch and with frequency response of 40 Hz – 16,000 Hz and the sensitivity of 2.7 mV/Pa at 1 kHz, nominal impedance of 350 Ohm and min. terminating impedance of 1 k Ohm OEM should have authorized service centre in India

Supply, Installation, Testing & Commissioning of 2 core 2.5 sq mm PVC Speaker Cable, high quality twisted pair manufactured with bright annealed PVC Sheathed electrolytic oxygen free grade tinned copper conductors, bunched compactly

Supply, Installation, Testing & Commissioning of 2 core shielded balanced microphone cable.

Supply, Installation, Testing & Commissioning of 32 core shielded balanced microphone snake cable.

Supply, Installation, Testing & Commissioning of Customized XLR Plates

Supply, Installation, Testing & Commissioning of Custom made Audio Plates

Supply, Installation, Testing & Commissioning of UL Listed Audio Connectors

Supply, Installation, Testing & Commissioning of AC Voltage Input Range-180-270 VAC, 50/60Hz Maximum AC Current Rating-16 Amps (Thermal breaker) AC Cord: 1.5mm2x3, 2.5m Long, black, IEC C-19 Female to Schuko CEE 7/7 Male Plug AC Receptacles: Convenience Outlet (Front Panel) 1 IEC C-13 (Unswitched) Rear Panel Outlets: 1 IEC C 13 pair (Unswitched), 3 IEC C13 pairs (Sequenced, each pair is controlled by separate relay) Surge/Under-Overvoltage Protection: AC Surge Protection: Series Multi-Stage Protection (SMP) Spike Protection Mode: Line to neutral, zero ground leakage Response Time: 1 nanosecond Maximum Surge Current: 6,500 Amps Operating Temperature Range: 5C (40F) to 40C (105F) degrees

Mixer 32 Mixing channels : 32 Line Inputs (24 mono and 4 stereo); 4 GROUP Buses + ST Bus; 6 AUX Sends + 2 FX Sends; FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM,PARAMETER control); 48V phantom power per channel; LINE: 24 mono + 4 stereo, CH INSERT: 24 RETURN: 1 stereo; USB Device, iPod / iPhone; +0.5/-1.0dB 20Hz - 20kHz, Nominal output level @1kHz

Supplying and fixing 24 U floor mount rack (Dimension-DxWxH – 800x600x1265 mm) as per specification No. WG-NAS/RAK

Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray anufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware.

Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting mains with 4x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 1) Double the rate of two wire bunch for calculating rate of four wire bunch upto 10 Sq.mm.

SITC of 100W High Quality zoomable LED parcan Light complete with COB Lamp source 3200K CCT Colour temperature, CRI & TLCI Values above 90, DmX 512 dimming with 2 channel control, Beam Angle of 11 to 35 Degree, Black powder coated body. As per direction of authority Including Labour cess and Insurance.

SITC of 200W LED Profile Spot 19 Degree Light complete with 3200K CCT Colour Temperature, CRI & TLCI above 90, DmX 512 dimming with 1 or 3 Channel modes, Black finish housing, IP20 protection having Lux @ 2 Mtrs above 27,000 suitable to illuminate the key presentor or talent on stage.As per direction of authority Including Labour cess and Insurance.

SITC of 400W LED Blinder Light 30 Degree complete with 3200K CCT Lamp source, DmX 512 dimming with 4 or 8 Channel modes, Black finish housing, IP20 protection having Strobe option and smooth dimming, illuminate Stage with uniform light levels. As per direction of authority Including Labour cess and Insurance.

SITC of 54 x 3W LED Par Light 3 in 1 Beam Angle 25° complete with RGBW 3W Lamp source x 54 Pcs, DmX 512 dimming with 8 Channel , Powder coated Black finish housing, IP20 protection having Sound Control & Master Slave Auto Run Mode. Illuminate the Indoor stage with unlimited colour effects. As per direction of authority Including Labour cess and Insurance.

SITC of 54x3W LED 3200K Par Light Beam Angle 25° complete with 3200K 3W Lamp source x 54 Pcs, Having CRI TLCI Values above 95, Flicker Free for high FPS, Smooth fade in and Fade out, High precision steady color, No heat, DmX 512 dimming with 2 Channel, 0 ~ 100%, Powder coated Black finish housing, IP20 protection.As per direction of authority Including Labour cess and Insurance.

SITC of Light fixture mouting clamp customized for suspending on fixed bars on stage made up of Aluminium or MS material complete with black powder coating matt black finish. As per direction of authority Including Labour cess and Insurance.

SITC of Light Fixture dual safety chain made up of GI wire rope bundled and twisted together having load bearing capacity above 200 Kgs, sleve on the rope.As per direction of authority Including Labour cess and Insurance.

SITC of C Profile MS Hot rolled strips 3mm thick with extra U bend used either to create basic supports for various auditorium stage rigs, duly powder coated with matt black texture finish paint. As per direction of authority Including Labour cess and Insurance.

SITC of Suspender cum clamps designed as per site conidition made out of MS material of size 50x 50x 6mm with black powder coated finish and threaded rod of minimum 12mm suitable to hold Basic grid and light bar.As per direction of authority Including Labour cess and Insurance.

SITC of 15 Mtr FOH Fixed Lighting Bar Straight as per the design made out of 40NB 48 OD Mild steel pipe dual barrel, dual construction connected with MS Flat duly powder coated with matt black texture finish.As per direction of authority Including Labour cess and Insurance.

SITC of Power Controller having rack mount / wall mount, separate incomer control for Motor control panel supply, RYB Phase indicators internally wired using IS certified wires and cables, provided with ivery connectors for the internal terminations and external outgoing connecting points custom built as per specification and project requirement. As per direction of authority Including Labour cess and Insurance. as per OEM

SITC of High quality power junction box 4 way made up of MS Sheet metal fabricated housing black powder coated, fibre glands of suitable size fitted with Powercon or IEC connector Box 10A. As per direction of authority Including Labour cess and Insurance.

SITC of High quality Dimming In junction box 1 way made up of MS Sheet metal fabricated housing black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Female socket.As per direction of authority Including Labour cess and Insurance.

SITC of High quality Dimming Out junction box 1 way made up of MS Sheet metal fabricated housing black powder coated, fibre glands of suitable size fitted with 5 Pin DmX XLR Male socket. As per direction of authority Including Labour cess and Insurance.

SITC of Internal Earthing System with copper bare conductors all along the cable trays, metal parts and Installation Hardwares. As per direction of authority Including Labour cess and Insurance.

SITC of Black Powder coated cable trays made out of MS Sheet fabricated for a size of 75mm with perforation for heat dessipation provided with lid.As per direction of authority Including Labour cess and Insurance.

SITC of Motor Control Panel cum remote control 4 Way providing power input for curtain motors internally neatly wired with contactors having individual motor control with required Push button, Emergency trip, RYB indicators, Supply Indictor and necessary meters. Motor control panel duly powder coated with ash grey paint texture finish with all required safety features. As per direction of authority Including Labour cess and Insurance.

SITC of Cable Connecting Circuit Boxes for the termination of cables from Electrical panel to the grid level point made out of MS Sheet metal fabricated housing duly powder coated with matt black texture finish paint, fitted with required channels and ivery connectors, necessary glands etc.. As per direction of authority Including Labour cess and Insurance.

SITC of DmX Male Female Connectors 5 Pin having rubber sheeth protection for Cross connecting DmX wiring connections. As per direction of authority Including Labour cess and Insurance.

SITC of DmX Male Termination Connector 5 Pin soldered with required capacity of resistor for signal deframing. As per direction of authority Including Labour cess and Insurance.

SITC of Opto isolated RDM enabled DmX splitter unit complete with Power In and safety fuse, 8 Output channels 5 Pin XLR in and out supporting DMX operation as per DmX 512 protocol. As per direction of authority Including Labour cess and Insurance.

SITC of DmX Controller 24 Faders to control atleast 96 channels with master control fader, scene saving option, LCD display, smooth movement faders, easy access key pads, DmX 512 protocol, optional chase & multifunction keys. As per direction of authority Including Labour cess and Insurance.

SITC of FRLS Copper unarmoured Flexible cable having 7 Core each of 1.5 Sq mm size.As per direction of authority Including Labour cess and Insurance.

SITC of 5 Core DmX Cable with Sheathed housing on the cable, well designed insulation, low noise suitable to transmet DmX signal.As per direction of authority Including Labour cess and Insurance.

Supply installation and commissioning of Laser Projector , 5000 lumens WXGA : size of effective display area- 0.76” (19.3 mm) x 3 BrightEra LCD Panel, Aspect ratio: 16:10, Number of pixels- 3,072,000 (1280 x 800 x 3) pixels, Zoom – Ratio: Approx. x 1.45, Throw ratio- 1.28:1 to 1.88:1, Lens shift Range Vertical +20% to +55%, Lens shift Range Horizontal - +/- 10%, Light source Type- Laser diode, Filter cleaning / replacement cycle (Max.)- 20,000 H , Screen size- Screen size- 40" to 300" (1.02 m to 7.62 m), Light output- 5,000 lm, Contrast ratio - 500,000:1, Speaker- 16 W Display resolution- 1920 x 1200 dots , Video signal input- NTSC, PAL, SECAM, 480/60p, 576/50i, 720/60p, 720/50p, 1080/60i, 1080/50i The following items are available for HDMI input only; 1080/60p, 1080/50p, 1080/24p , Keystone correction Horizontal- +/- 30 degrees, Vertical- +/- 20 degrees, INPUT OUTPUT -RGB / Y PB PR input connector:Mini D-sub 15 pin , Audio input connector: Stereo mini jack, INPUT B- HDMI input connector: HDMI 19-pin, HDCP support, Audio input connector: HDMI audio support, INPUT C- HDMI input connector: HDMI 19-pin, HDCP support, Audio input connector: HDMI audio support, INPUT D- HDBaseT interface connector: RJ45, 4 play (Video, Audio, LAN, Control), VIDEO IN- Video input connector: BNC, Audio input connector: Shared with INPUT A, OUTPUT- Audio output connector: Stereo mini jack, LAN- RJ45, 100BASE-TX , USB- TYPE-A, TYPE-B

Supplying erecting of Projector Ceiling / Wall mounting kit

Supply of imported motorised projector screen electrically operated 220 V AC 50Hz single phase. Motor mounted in side roller tube 3-wire instantly reversible type with brake. Equipped with internal thermal overload projection. Preset limit switch setting automatically stops the screen in UP and DOWN position. 3 position control switch or radio-remote control stops or reverses screen direction at any point in the operating cycle. Robust square or hexagonal case in powder coated metal casing. Wall or ceiling mounted. Size 6 x8 Ft./8x10 ft

Supplying and erecting 25m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete. (1-8-29)

Supplying and erecting 3m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying & erecting HDMI Extender Over RJ45 Ethernet Cable Cat 6, 60m/200ft complete..(1-8-28)

Supplying and erecting 15m Audio Video cord low voltage grade as per specification with required 3RCA x 3RCA connector complete. (1-10-26)

Supplying and erecting modular pop up Box 8 module erected with provided AV/ HDMI , RJ 45,6 A electrical sockets and switch on provided table. (1-6-58)

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 40 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Eagle Infra India Ltd