Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹74.4 LAccepted-AOC | L1 | Accepted-AOC quoted lowest amount | |
| 2 | L2₹79.6 L+₹5.2 L (7.04%)Rejected-AOC 14 453 INDIRA NAGAR LUCKNOW UTTAR PRADESH | BIJNOR | UTTAR PRADESH | 246701 | L2 | Rejected-AOC quoted higher rate than L1 | |
| 3 | Not Admitted-Fee/PreQual/Technical 99 SUSHILA BIHAR BHUD BULANDSHAHAR | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹81.5 L
EMD Value
₹1.6 L
Closing Date
31 Jan 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE Sixth Circle IW Lucknow
Office of SE Sixth Circle IW Lucknow
Renovation of Seemau Inspection house in district unnao
2023_UPIDC_768947_1
13/SE-6/2022-23 (LOT1)
Open Tender
Civil Works - Buildings
Item Rate
180 days
Unnao
as per pre qualification document
4 documents required · 4 mandatory
₹2,354
₹1.6 L
Yes
31 Mar 2023
24 Jan 2023
31 Jan 2023
24 Jan 2023
31 Jan 2023
24 Jan 2023
Amount
Cleaning heavy jungle including uprooting of thorney bushes.
Dismantling old existing plaster of inner ,outer & ceilling plaster of simau I.H. including disposal of refuse as per directed by the Engineer-in-charge with in distance of 60m
Racking out joints of old brick work of simau I.H in cement or lime mortar to a depth of 1cm including disposal of refuse as directed by the Engineer in charge with in a distance of 60 m.
Demolishing B.W. of parapet walls manually/ by mach. Means including stacking of serviceable material and disposal of unserviceable material with in 50 mts lead as per direction by the Engg-in-charge.
Demolishing Lime concrete from top layer of roof of I.H. manually/ by mach. Means including stacking of serviceable material and disposal of unserviceable material with in 50 mts lead as per direction by the Engg-in-charge
Demolishing Cement concrete from floor of rooms ,bath rooms of I.H. 1:3:6 manually/ by mach. Means including stacking of serviceable material and disposal of unserviceable material with in 50 mts lead as per direction by the Engg-in-charge
Removing old door, Window & Ventilator from,rooms, bath Rooms of I.H.
Laying Brick on edge Soling From IH to Gate as per pwd SOR 2020-21 chept-13 item 11.1.1
Brick edging on both side of the C.C. road of Ist class brick 8cm (3") wide and 12cm (4.5") deep laid with mud mortar all labour finished to the required templete and in proper alignment and also including dressing & ramming the excavated earth including all labour T&P sundried required for proper complition of work with material .
Providing and Laying C.C.1:1.5:3(1 cement: 1.5 coarse sand :3 graded stone 40mm nominal size )including supplying of all materials,labour,and T&P etc.required for proper complition of work and curing complete,also form work in floor over old brick soling of I.H. Campus.
Earth Excavation in foundation in ordinary soil including lift 1.5m and lead upto 30m including filling watering and ramming of excavated earth into the trenches or into the space beymeen the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in -charge upto a distance of 30m. frome the foundation trenches.of boundary wall,sockpit & septick tank.
Providing and Laying P.C.C 1:4:8(1cement:4coarse sand:8 graded stone ballast 20mm nominal size)including supply of all materias.labour and T&P etc. Required for -proper completion of work and curing complete.in foundation of boundary wall,septic tank and columns.
Centring and shuttering of boundary wall columns & plinth beam for R.C.C. work including rent of shuttering, material, labour and T&P required proper completion of work for slab and wall etc.
Bending, Binding, Cutting and placing in position reinforcement including cost of labour, and material T&P etc required for proper completion of work in columns & Gate pillers.
R.C.C. Work in coloumns and gate pillers of boundary wall with approved coarse sand and(3/4")guage approved stone ballast in the preparation of M20( 1:1.5:3), excluding supply of reinforcement and its binding with 24 B.W.G.G.I.Binding wire ,moulds and all other materials, labour and T&P etc .Required for proper completion of work .
First class brick work in 1:4 cement morter with coarse sand including supply of all material labour ,labour and T&Petc .required for proper complition of work.in boundary wall,parapet wall,&gate pillers,
12.5 mm thick cement plaster 1:3 cement coarse sand including all material labour and T&P etc. in boundary wall, parapets,rooms,varanda,bath & outer sides walls
Antitreatment of existing masonry using chemicalemulsion@one lit /hole at 300mm interval including drilling holes at 45 degree and plugging them with cement mortar1:2(1cement:2 coarse sand ) to the full depth of the hole
Providing and Laying cement concrete M20(1:1.5:3) (1cement:1.5coarse sand:3 graded stone ballast 20 mm nominal size)including supply of all material.labour and T&P etc. required forpropercomplition of work and curing complete on floor of Rooms,bath Rooms & veranda.
Providing laying vetrified tiles in Rooms of size 300x300 mm or more( thickness to be specified by the manufacturer),of Ist quality conforming to IS:15622 of approved make, in all colours,shades,except white, Ivory,grey,fume red broun,laid on 20mm thick cement mortar 1:4(1 cement :4 coarse sand) jointing with grey cement [email protected]/sqm including pointing the joints with white cement and matching pigmente etc complete.
Providing laying Glazed ceramic tiles on bath floor of size 300x300 mm or more( thickness to be specified by the manufacturer),of Ist quality conforming to IS:15622 of approved make, in all colours,shades,except white, Ivory,grey,fume red broun,laid on 20mm thick cement mortar 1:4(1 cement :4 coarse sand) jointing with grey cement [email protected]/sqm including pointing the joints with white cement and matching pigmente etc complete.
Providing laying Glazed ceramic tiles in bath walls of size 300x300 mm or more( thickness to be specified by the manufacturer),of Ist quality conforming to IS:15622 of approved make, in all colours,shades,except white, Ivory,grey,fume red broun,laid on 20mm thick cement mortar 1:4(1 cement :4 coarse sand) jointing with grey cement [email protected]/sqm including pointing the joints with white cement and matching pigmente etc complete.
Providing laying Glazed ceramic tiles in varandah of size 300x300 mm or more( thickness to be specified by the manufacturer),of Ist quality conforming to IS:15622 of approved make, in all colours,shades,except white, Ivory,grey,fume red broun,laid on 20mm thick cement mortar 1:4(1 cement :4 coarse sand) jointing with grey cement [email protected]/sqm including pointing the joints with white cement and matching pigmente etc complete.
Providing, cutting and Laying Murga Jali with all material labour and T&P etc complete . in between C.C.1:2:4 on slab
Providing and Laying cement concrete M20 1:1.5:3(1cement:2coarse sand:4 graded stone ballast 20mm nominal size) over roof including supply of all materias.labour and T&Petc. Required for -proper completion of work and curing complete
Spreading over leaky roof with bitumen paint at 10 1bs. Per 100 sq feet including sweeping, cleaning the 'Roof with brushes , heating of the paint upto the required temperature pouring it on the surface spreading of necessary quality of approved coarse sand at lift. per 100 sft. and including labour and T&P etc. required for proper completion of work. (labour rate only) (Same as item No.15)
Providing and laying white base putty 1mm thick over plaster surface ever and smooth including and T&P etc. complete. (Same as item No. 2)
Interior wall painting with plastic emulson paint of approved brand and manufacture to give an even shed one or more coat on surface (Royal / Silk) Asian / Berger) (Same as item No. 2)
Exterior wall finishing with extarior paint with silicone additives of revured shad on old walls, two or more coat over exist & cement apex altimen weather coat.
Painting on iron work with one coat of ready mixed priming paint with one or more coat of approved paint including supply of all materials, labour and T&P etc required for proper complition of the work.paint to be used should confirm ISI No 103-1950.
Fabrication of mild steel angle iron work in grill,gate ,door and window frames including cutting ,drilling ,welding /riveting and hinges,where necessary and fixing in position including cost of all material labour, and T&Petc.required for proper completion of work .
Fabrication of mild steel/iron work in iron stair. frame including cutting ,drilling ,welding /riveting and hinges,where necessary and fixing in position including cost of all material labour, and T&Petc.required for proper completion of work .
Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory window, all complete with 4.00mm thick glass panes.
Steel work welding built up section/ framed work, including cutting, hoisting, fixing in position and applying a primer coat of approved steel primer using structural steel etc as required in gate, ladder, railing and similar work. (Gate)
Supplying & fixing Teak wood Frame of door, window, clerestory window & other frame and fixed including simple moulding straight works as in chaukhat including supply of all material, labour and T&P ofetc required for proper completion of work.
Providing and fixing panelled & glazed shutters for doors and clerestory window,fixing with butt hinges of required size with necessary screw,excluding panelling which will be paid for seperately,all complete as per direction of engineer- in -charge (note-butt hinges and neccesary screws shall be paid seprately)
Providing and fixing panelled & glazed shutters for window and clerestory window,fixing with butt hinges of required size with necessary screw,excluding panelling which will be paid for seperately,all complete as per direction of engineer- in -charge (note-butt hinges and neccesary screws shall be paid seprately)
Providing and fixing wire gauge shutter using stainless steel wire gauge grade 304 aperture 1.4mm & 0.50mm dia wire for door 35mm thick shutter of required size teak wood.
Providing and fixing wire gauge shutter using stainless steel wire gauge grade 304 aperture 1.4mm & 0.50mm dia wire for windows 35mm thick shutter of required size teak wood.
Providing and fixing wire gauge shutter using stainless steel wire gauge grade 304 aperture 1.4mm & 0.50mm dia wire for ventilation 35mm thick shutter of required size teak wood.
Wax polish on new wood work with approved readymade vax polish or approved french polish after rubbing down with sand paper i/c supply of all L/M &etc. required for proper completion of the work. As per PWD SOR chept. no.-15 item no.-658
P/Fixing Door Closers ISI mark with approved make.
Wiring point for light with 1.5 Sq. mm FRLS PVC insulated single core copper conductor cable in heavy gauge rigid steel conduit pipeconduit in the wall complete with 14SWG copper earth continuity wire, GP box , piano type switch& ceiling rose/angle/batten holder on 3mm thick phenolic laminated backlite sheet etc. complete in all-respect including matching colour wash (complete rate) as per P.W.D. Electrical schedule item no. 131(B)
Wiring point for light with 1.5 Sq. mm FRLS PVC insulated single core copper conductor cable in heavy gauge rigid steel conduit pipeconduit in the wall complete with 14SWG copper earth continuity wire, GP box , piano type switch& ceiling rose/angle/batten holder on 3mm thick phenolic laminated backlite sheet etc. complete in all-respect including matching colour wash (complete rate) as per P.W.D. Electrical schedule item no. 132(B)
Wiring point for fan/fresh air fan (light duty exhaust fan) with1.5 Sq. mm FRLS PVC insulated single core copper conductor cable in heavy gauge rigid steel conduit pipeconduit in the wall complete with 14SWG copper earth continuity wire, GP box , piano type switch& ceiling rose/angle/batten holder on 3mm thick phenolic laminated backlite sheet etc. complete in all-respect including matching colour wash (complete rate) as per P.W.D. Electrical schedule item no. 133(B)
Wiring point for plug with 1.5 Sq. mm FRLS PVC insulated single core copper conductor cable in heavy gauge rigid steel conduit pipeconduit in the wall complete with 14SWG copper earth continuity wire, GP box , piano type switch& ceiling rose/angle/batten holder on 3mm thick phenolic laminated backlite sheet etc. complete in all-respect including matching colour wash (complete rate) as per P.W.D. Electrical schedule item no. 134(B)
Wiring point for call bell with 1.5 Sq. mm FRLS PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipeconduit in the wall complete with 8 SWG GI earth continuity wire, GP box , piano type bell push or two pin socket etc. complete in all-respect including matching colour wash (complete rate) as per P.W.D. Electrical schedule item no. 135(B)
Wiring point for power plug/H-P.M.V/Sodium Vapour lamp with 1.5 Sq. mm FRLS PVC insulated single core copper conductor cable in heavy gauge rigid steel conduit pipeconduit in the wall complete with 14SWG copper earth continuity wire,15A piano type switch etc. complete in all-respect including matching colour wash (complete rate) as per P.W.D. Electrical schedule item no. 136(B)
Wiring point for exhaust fan with1.5 Sq. mm FRLS PVC insulated multistand single core copper conductor cable in heavy gauge rigid steel conduit pipeconduit in the wall complete with 14SWG copper earth continuity wire, GP box ,15A piano type switch& ceiling rose on 3mm thick phenolic laminated backlite sheet etc. complete in all-respect including matching colour wash (complete rate) as per P.W.D. Electrical schedule item no. 137(B)
Wiring point for light and fan with1.5 Sq. mm FRLS PVC insulated multistand single core copper conductor cable in heavy gauge rigid steel conduit pipeconduit in the wall complete with 14SWG copper earth continuity wire, GP box ,15A piano type switch& ceiling rose on 3mm thick phenolic laminated backlite sheet etc. complete in all-respect including matching colour wash (complete rate) as per P.W.D. Electrical schedule item no. 138(B)
Supply and burrying of 600 mm x 600mm x 6.0mm G.I. plate, vertically for earthing with it stop at least 3m below ground level complete with 20mm dia G.I. Pipe and funnel for watering and one earthing lead or one no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe upto switch board (form apron to switch board the cost of G.I.Pipe and G.I. wire will be extra) 30 cm square C.I. frame with hinged cover, masonry housing, alternate layer of charcoal/ coke & salt at least 150 mm thick alround etc. as per direction of engineer-in-charges complete in all respect ( this will apply for earthing for poles also) ( complete rate) as per P.W.D. electrical schedule item No. 702.
S/F of 32Amp. 240V D.P. metal clad rewardable type switch fuse unit on M.D.F.E.G. teak wood board, complete in all respect as per P.W.D. Electrical schedule item No. 305 cat B
S/F of 63 A 415V metal and clad T.P.N. rewardable type switch fuse unit on angle iron bracket frame, complete in all respect as per P.W.D. Electrical schedule item No. 316 cat B
S/F of factory wired H.P.F. box type fluorescent tube light fitting suitable for 1x40 watt fluorescent tube complete including tubes etc. on surface, complete in all respect of Philips/ Bajaj/ G.E.C. or Crompton make
Same as above for 2x40 watt fluorescent tube as per P.W.D. Electrical schedule item No. 454 cat AA (Seg.)
S/F of factory wired H.P.F. street light fluorescent tuble light fitting suitable for 1x40 watt fluorescent tube including tube etc. on G.I. bracket, complete in all respect of Philips/ bajaj/ Crompton or G.E.C. make as per P.W.D. Electrical schedule item No. 467(i) cat AA (Seg.)
S/F of call bell of approved make on polished MDFEG board including making connections etc. complete in all respect as per P.W.D. 1101
S/F of 15Amp. 240V I.C. cut out of approved make on the meter board or polished MDFEG / teak wood board complete in all respects as per P.W.D. 1111.
S/F of fire bucket, round bottom made of G.I. sheet 9-11 liters capacity duly painted as per fire brigade design, supported on hanging bracket, chained and locked, initially filled with fine river sand water as per direction of Engineer-in-charges (Complete rate) as per PWD 1133.
S/F of power plug with 15A/250V flush type switch and 5 pin 15Amp / 250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with phenolic laminated Bakelite sheet cover 3 mm thick fixed with brass machine screws and cup washer (Complete Rate) as per P.W.D. 1139
S/F fixing of fan hook fabricated from M.S. rod for ceiling fans (Complete rate) as per P.W.D.1123.
P/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass treaded fittings including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge internal work exposed on wall 20mm dia
P/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass treaded fittings including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge internal work exposed on wall25 mm dia
P/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass treaded fittings including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge external work. 20 mm dia
P/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass treaded fittings including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge external work. 25mm dia
P/F in gun metal valve with C.I. wheel of approved quality (screwed) 20mm dia
P/F in gun metal valve with C.I. wheel of approved quality (screwed) 25mm dia
P/F C.P. brass angle valve for cistern, wash basin, Gyger etc. 15 mm nominal hole size including cost of all material, labour T&P etc.
P/F 15 mm Nominal hole size C.P. stop cocks
P/F 15 mm Nominal hole size C.P. brass pillar each cocks.
Providing and fixing PVC waste pipe for sink and wash basin including complete fitting
P/F in position C.P. brass towel rail complete with brackets including making chases in walls and repairing the same in 1:3 CM complete. 750x20 mm
Fixing C.P. brass soap dish with C.P. brass brackets fixed to wooden plugs, plastic sleeves with C.P. brass screws.
P/F C.P. brass Toilet paper holder including cost of all material, labour T&P etc.
P/F C.P. Jali for Nahani trap 100 mm dia including cost of all materials.
P/F C.P. brass waste pipe for wash basin 32 mm dia complete cost of all material, labour T&P etc.
P/F chromium plated copper pipe connection for, wash basin, cistern Gyger etc. with two nos C.P.nuts. 450mm Length
P/F Indian type white glazed earthen ware 1st quality ISI marked W.C. pan size 580 mm Indian make of approved quality including cost of all material. Same as above but Orrisa pan
P/F Indian type white glazed earthen ware 1st quality ISI marked W.C. pan size 580 mm Indian make of approved quality including cost of all material. Same as above but Europian Type
P/F 8mm dia C.P./ S.S jet with flexible tube up to 1m long with SS triangular plate to Europian type W.C. of quality and make as approved by Engineer in charge
Providing and fixing PVC low level flushing cistern with manually controlled device conforming to IS 7231 with all fittings and fixtures complete
P/F wash basin with C.I. bracket 15m C.P.brass piller taps 32mm C.P. waste of standard pattern including painting of fitting and brackets, cutting and making good the wall wherever required 630x 450 mm 630x450mm
P/F white vitreous china clay flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm size resp with automatic flushing cistern with standard size flush pipe and C.P. brass spreaders with brass union and G.I. clamps complete including pailing of fitting sand brackets, cutting and making good the wall and floors where ever required (one urinal basin)
P/F stainless steel A ISI 304 (18/8) kitchen sink as per including 13963 with C.I. Brackets and stainless steel plug 40mm, including painting of fitting and brackets cutting and making good the walls wherever required.
Proving and fixing soil, waste and vent pipes 100 mm dia
P/F square mouth S.W. gully trapclass SP-1 complete with C.I. grating brick masonary chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg/ standard design 100x100 mm size p type
P/F mirror of following size of approval make with teak wood moulded frame and 6mm thick hardboard backing including cost of all material, labour T&Petc 600 x 450 mm
Supplying and fixing C.I. cover without frame for manholes 500 mm dia C.I. cover (medium duty) the weight of the cover to be not less than 58 kg
Over head PVC Water storage tank 500 L
Shocket 50mm Dia
Shocket 75mm Dia
Elbow band 50 mm Dia
Elbow band 75 mm Dia
T-Shocket
P/F chromium plated shower rose with 15 mm 20mm inlet and 100 mmdia
P/F lead chauled joint to cast iron soil wast & ventilation pipe and fittings of pipe of 75 mm dia nominal size including testing of joints
P/F sand cast iron spigot & shocket, soil waste drainage and ventilation pipe of the 100 mm dia
P/F cast iron floor trap of self cleanig design with sand and cast iron screwed down as hinged grating without vent arm complete including cost of cutting and making good the wall &floor
P/F stay,s and clamps for sand cast iron pipe of 100 mm dia meters
P/F S.W.gully trap ,Is 651 (grade-A) complete with C.I.grading brick masonry chamber and water tight C.I. cover frame 30x30x cm size (inside) the weight of cover to be not less than 2.72 kg as per standard design including excavation etc.complete.
P/fixing of submersieble pump with broring borewell,lowering pipe ,and comlete fitting of submersible pump(1.5 H.P.crompton greaves) with all labour,material, T&P etc complete
Supply and fixing R.C.C Precast Boundary wall with poll 150mmx150mm, 7 no. 3mmm high tension PC wire including earth work & fixing in posistion( 450 mmx450 mmx600 mm) in 1:1.5:3 with stone gritt(all work done as per direction of engineer- in-charge) including cost of all material , labour & T& P etc
Finishing walls water proofing cement paint of required shade New work (Two or more coats applied @ 3.84kg/10sqm)
Dismantling old existing plaster of kitchen & Store room of Mohan I.H.campus including disposal of refuse as per directed by the Engineer-in-charge with in distance of 60m
Racking out joints of old brick work of kitchen & store room of in cement or lime mortar to a depth of 1cm including disposal of refuse as directed by the Engineer in charge with in a distance of 60 m.
Demolishing B.W. of parapet walls manually/ by mach. Means including stacking of serviceable material and disposal of unserviceable material with in 50 mts lead as per direction by the Engg-in-charge.
Demolishing Lime concrete from top layer of roof of Kitchen & store of IH manually/ by mach. Means including stacking of serviceable material and disposal of unserviceable material with in 50 mts lead as per direction by the Engg-in-charge
Demolishing Cement concrete from floor of kitchen & store room of I.H. 1:3:6 manually/ by mach. Means including stacking of serviceable material and disposal of unserviceable material with in 50 mts lead as per direction by the Engg-in-charge
Removing old door, Window & Ventilator of kitchen & store room of I.H. campus
first class brick work in 1:4 cement morter with coarse sand including supplyiy of all material labour ,labour and T&Petc .required for proper complition of work in parapet wall.
12.5 mm thick cement plaster 1:3 cement coarse sand including all cost of labour,material and T&P etc. in parapets,kitchen, store rooms,varanda & outer sides of wall.
Antitermite treatment of existing masonry using chemicalemulsion@one lit /hole at 300mm interval including drilling holes at 45 degree and plugging them with cement mortar1:2(1cement:2 coarse sand ) to the full depth of the hole
Providing and Laying cement concrete 1:1.5:3(1cement:1.5coarse sand:3 graded stone ballast 20 mm nominal size )including supply of all material.labour and T&Petc. Required for -proper complition of work and curing complete.on floor of kitchen ,store room & varanda.
Providing laying vetrified tiles in Kitchen rooms size 600x600 mm or more( thickness to be specified by the manufacturer),of Ist quality conforming to IS:15622 of approved make, in all colours,shades,except white, Ivory,grey,fume red broun,laid on 20mm thick cement mortar 1:4(1 cement :4 coarse sand) jointing with grey cement [email protected]/sqm including pointing the joints with white cement and matching pigmente etc complete.
Providing laying vetrified tiles in varanda of size 600x600 mm or more ( thickness to be specified) by the manufacturer),of Ist quality conforming to IS:15622 of approved make, in all colours,shades,except white, Ivory,grey,fume red broun,laid on 20mm thick cement mortar 1:4(1 cement :4 coarse sand) jointing with grey cement [email protected]/sqm including pointing the joints with white cement and matching pigmente etc complete.
providing, cutting and Laying Murga Jali with all material labour and T&P etc complete . in between C.C.1:1.5:3 on slab
Providing and Laying cement concrete 1:1.5:3(1cement:2coarse sand:4 graded stone ballast 20mm nominal size) over roof including supply of all materias.labour and T&Petc. Required for -propercomplition of work and curing complete on top of varanda,kitchen,& store room.
Spreading over leaky roofs with bitumen paint at 10 1bs. Per 100 sq feet including sweeping, cleaning the 'Roof with brushes , heating of the paint upto the required temperature pouring it on the surface spreading of necessary quality of approved coarse sand at lift. per 100 sft. and including labour and T&P etc. required for proper completion of work. over top of roof
Providing and laying white base putty 1mm thick over plaster surface ever and smooth including and T&P etc. complete.kitchen & store outer and inner surface
Interior wall painting with plastic emulson paint of approved brand and manufacture to give an even shed one or more coat on surface (Royal / Silk) Asian / Berger) (Same as item No. 2
Extirior wall finishing with extarior paint with silicone additives of revured shad on old walls, two or more coat over exist & cement apex altimen weather coat. (Same as item no. 1)
Painting on iron work with one coat of ready mixed priming paint with one or more coat of approved paint inc supply of all materials, labour and T&P etc reqd for proper complition of the work, paint to be used should confirm ISI No 103-1950
Fabrication of mild steel angle iron work in grill,gate ,door and window frames including cutting ,drilling ,welding /riveting and hinges,where necessary and fixing in position including cost of all material labour, and T&Petc.required for proper completion of work .
Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory window, all complete with 4.00mm thick glass panes.
S/F Teak wood Frame and fixed simple moulding straight works as in chaukhat including supply of all material, labour and T&P ofetc required for proper completion of work.
Providing and fixing panelled & glazed shutters for doors and clerestory window,fixing with butt hinges of required size with necessary screw,excluding panelling which will be paid for seperately,all complete as per direction of engineer- in -charge (note-butt hinges and neccesary screws shall be paid seprately)
Providing and fixing panelled & glazed shutters for window and clerestory window,fixing with butt hinges of required size with necessary screw,excluding panelling which will be paid for seperately,all complete as per direction of engineer- in -charge (note-butt hinges and neccesary screws shall be paid seprately)
Providing and fixing wire gauge shutter using stainless steel wire gauge grade 304 aperture 1.4mm & 0.50mm dia wire for door 35mm thich shutter of required size teak wood.
Providing and fixing wire gauge shutter using stainless steel wire gauge grade 304 aperture 1.4mm & 0.50mm dia wire for , windows 35mm thich shutter of required size teak wood.
Providing and fixing wire gauge shutter using stainless steel wire gauge grade 304 aperture 1.4mm & 0.50mm dia wire for , ventilation 35mm thich shutter of required size teak wood.
wax polish on new wood work with approved readymade vax polish or approved french polish after rubbing down with sand paper i/c supply of all L/M &etc. required for proper completion work As per PWD SOR chept. no.-15 item no.-658
P/Fixing Door Closers ISI make with approved make.
Wiring point for light with 1.5 Sq. mm PVC insulated single core alumnium cable in PVC conduit pipe concealed in the wall complete with 8 SWG , G.I. earth continuity wire and piano type switch etc. complete in all-respect (complete rate) as per P.W.D. Electrical schedule item no. 131Abut FR PVC insulated multistrand copper conductor cable or earth wire drawn inside the conduit as per P.W.D. Electrical schedule item no. 131 B
Wiring point for fan/fresh air fan (light duty exhaust fan) with 1.5 Sq. mm FRLS PVC insulated mutistranded single core copper conductor cable in heavey gauge rigid steel conduit pipe concealed in the wall complete with 14 SWG copper earth continuity wire, GP Box, piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic laminated backlite sheet etc complete in all respect as directed inc matching color wash as per PWD electrical schedule item no 133 B
Wiring point for light with 1.5 Sq. mm FRLS PVC insulated mutistranded single core copper conductor cable in heavey gauge rigid steel conduit pipe concealed in the wall complete with 14 SWG copper earth continuity wire, GP Box, piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic laminated backlite sheet etc complete in all respect as directed inc matching color wash as per PWD electrical schedule item no 133 B
Wiring point for exhaust fan with 1.5 Sq. mm FRLS PVC insulated mutistranded single core copper conductor cable in heavey gauge rigid steel conduit pipe concealed in the wall complete with 14 SWG copper earth continuity wire, GP Box, piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic laminated backlite sheet etc complete in all respect as directed inc matching color wash as per PWD electrical schedule item no 137 B
Wiring point for light and fan with 1.5 Sq. mm FRLS PVC insulated mutistranded single core copper conductor cable in heavey gauge rigid steel conduit pipe concealed in the wall complete with 14 SWG copper earth continuity wire, GP Box, piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic laminated backlite sheet etc complete in all respect as directed inc matching color wash as per PWD electrical schedule item no 138 B
S/F of 32Amp. 240V D.P. metal clad rewirable type switch fuse unit on M.D.F.E.G. teak wood board, complete in all respect as per P.W.D. Electrical scheducle item No. 305 cat B
S/F of factory wired H.P.F. box type fluorescent tube light fitting suitable for 1x40 watt fluorescent tube complete including tubes etc. on surface, complete in all respect of Philips/ Bajaj/ G.E.C. or Crompton make as per P.W.D. Electrical schedule item No. 453 cat AA (Seg)
S/F of 15Amp. 240V I.C. cut out of approved make on the meter board or polished MDFEG /teak wood board complete in all respects. As per P.W.D.1111
S/F of power plug with 15A/250V flush type switch and 5 pin 15Amp / 250V flush type universal socket in suitable M.S. box of 175mm x 100mm x 50mm size with pheoolic laminated bakelite sheet cover 3 mm thick fixed with brass machine screws and cup washer (Complete Rate) as per P.W.D. 1139
S/F dixing of fan hook fabricated from MS Rod for ceiling fans (complete)
P/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass treaded fittings including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge internal work exposed on wall20mm dia
P/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass treaded fittings including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge internal work exposed on wall 25 mm dia
P/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass treaded fittings including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge external work. 20 mm dia
P/F chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain brass treaded fittings including fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge external work. 25 mm dia
P/F in gun metal valve with C.I. wheel of approved quality (screwed) 20mm dia
P/F in gun metal valve with C.I. wheel of approved quality (screwed)25mm dia
P/F C.P. brass angle valve for cistern, wash basin, Gyger etc. 15 mm nominal hole size including cost of all material, labour T&P etc.
P/F 15 mm Norminal hole size C.P. stope cocks
P/F 15 mm Nominal hole size C.P. brass pillar each cocks.
Providing and fixing PVC waste pipe for sink and wash basin including complete fitting
P/F in position C.P. brass towel rail complete with brackets including making chases in walls and repairing the same in 1:3 CM complete. 750x20 mm
Fixing C.P. brass soap dish with C.P. brass brackets fixed to wooden plugs, plastic sleeves with C.P. brass screws.
P/F C.P. Jali for Nahani trap 100 mm dia including cost of all materials.
P/F C.P. brass waste pipe for sink and wash basin 32 mm dia complete cost of all material, labour T&P etc.
PVC pipe connection for sink, wash, basin, cistren. Gyger etc. with two nos. C.P. nuts 450 mm long
P/F wash basin with C.I. bracket 15m C.P.brass piller taps 32 mm CP waste of stranded pattern inc painting of fitting and brackets cutting hole & making good the same but excluding fitting. 630x450mm
P/F stainless steel A ISI 304 (18/8) kitchen sink as per including 13963 with C.I. Brackets and stainless steel plug 40mm, including painting of fitting and brackets cutting and making good the walls wherever required.
Proving and fixing soil, waste and vent pipes 100 mm dia
P/F square mouth S.W. gully trapclass SP-1 complete with C.I. grating brick masonary chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg/ standard design 100x100 mm size p type
P/F mirror of following size of approved make with teak wood moulded frame and 6mm thick hardboard backing including cost of all material, labour T&P etc. 600x350mm
Fixing S.W. gully trap grade "A" complete with C.I. grating, brick masonry chamber and water tight C.I. cover with frame of 300x300mm size (inside) square mouth traps or "P or "S traps.
PVC Water storag tank 500 lit capacity .
shocket 50mm Dia
shocket 75nn Dia
Elbow band 15mm Dia
Elbow band 20 mm Dia
T-Shocket
P/F sand cast iron spigot & shocket, soil waste drainage pipe of the 100 mm dia
P/F cast iron floor trap of self cleanig design with sand and cast iron screwed down as hinged grating without vent arm complete including cost of cutting and making good the wall &floor
P/F stay,s and clamps for sand cast iron pipe of 100 mm dia meters
P/F S.W.gully trap ,Is 651 (grade-A) complete with C.I.grading brick masonry chamber and water tight C.I. cover frame 30x30x cm size (inside) the weight of cover to be not less than 2.72 kg as per standard design including excavation etc.complete.
CHANDRA SEN
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .