CERTAIN SANCTIONED WORKS UNDER GE (WEST) JABALPUR

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surfaces in cement mortar (1:6) finished even and smooth w/o using extra cement complete all as specified & directed

M&L for rendering 15mm thick on brick work or concrete surfaces in cement mortar (1:4) finished even and smooth w/o using extra cement complete and using WPC by 3% of weight of cement used complete all as specified and directed. Note : WPC will be measured seprately.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for applying two coat of distemper oil emulsion averaging minimum 2mm thick birla white wall care putty over a coat of alkali resistant cement based primer on wall/ceiling surfaces & smoothening the surfaces with sand papers etc., including complete removal of existing treatment of any description (such as OBD/ plastic emulsion/ interior/ exterior emulsion paint etc) before applying OBD on new/old surafaces complete all as specified and directed.

Material & Labour for preparation new/old plastered surfaces and walls including cornices, pilasters etc and applying two coats of cement base paint over a coat of white cement primer complete all as specified and as directed.

Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S & F in repair WPC Door Frame 65x100 mm including all fitting making good after complete all as specified and directed.

S & F in repair WPC double Door Frame 125x65 mm including all fitting making good after complete all as specified and directed.

S & F in repair 35 mm thick WPC Door including making good after complete all as specified and directed.

S & F in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300 mm long complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters,side hung type without sash bars,aluminium sections 0.55kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised alumium snap beading screws,anodised aluminium fittings such as peg stays 150mm long(1No.).hinges type B-21 100mm long2No suitable handle 1No complete all as specified with powder coating of any colour(thickness or powder coating not less than 50 micron)

Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side 1mm prefemlaminated of approved texture ("Celuca ply of Rajshree make or equivalent in "Sintex" as approved by GE ) as in Kitchen cabinet (withshelves and partitions) inas per manuacturer's instructions complete all as specified & directed.

Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side prelaminated of approved texture ("Celuca ply of Rajshree make or equivalent in "Sintex" as approved by GE ) as in cupboard (withshelves and partitions) as per manuacturer's instructions complete all as specified & directed.

S&F in repair stainless steel kitchen basket in various type of basket plain basket height 4'' Thali basket 8" height Cup saucer 4" height and performance cultlury basket 4'' height complete all as specified and directed.

S&F in repair hattich channel for basket sizes 600mm long and 46mm wide complete all as specified and directed.

S&F in repair stainless steel handle for basket size 6'' complete all as specified and directed.

S&F in repair stainless steel auto closing concealed hinges 9.5 crancks for half overlay doors with opening angle 95*(14-32mm) with adjustment 4mm complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and directed.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section. complete all as specified and directed.

Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repair Curtain dropary 25 mm dia PVC Coating mild steel fancy type rod of fancy type including brass and brackets with curtain rings of approved quality etc complete all as specified and directed.

Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and directed.

Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and directed.

M&L for complete removal of existing treatment on wall and applying two coat of oil bound distemper over a coat of alkali resistance primer over a coat of wall care putty (to an average thickness of 2mm )thick including necessary scaffolding arrangement as required at site all as specified and directed.

M&L for preparation of old ceiling surfaces and applying two coat of white wash on ceiling ove complete all as specified and directed.

M&L for complete removal of existing surface of wall and applying two coats of cement base paint, over a coat of white cement primer complete all as specified and directed..

S&F frame work such as grills, grating etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar works conforming to Fe-410-0 complete all as specified and directed.

M & L for PCC 1:2:4 type B1 using 20 mm graded aggregate as in bed block/hold fast blocks, padding, chajjas repair, benching and coping etc with & including necessary form work for fair faces of concrete, complete all as specified and directed

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including jointing with solvent, grinding, rounding to edges and polishing complete all as specified and directed.

M&L for plain Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) in sub basefilling and mass concrete complete all as specified and directed.

M&L for 75 mm thick plinth protection in/Subbase PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, Double tiles charged tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor complete all as specified and directed

ditto- all as per item above but in skirting laid over and including 10 mm thick plaster in CM 1:4 complete all as specified & directed.

M&L plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone agg) as in filling under undulation of roof top/chajja/beam etc with and incl necessary formwork complete all as specified and directed.

Removal of existing detoriated decayed tarfelt or any other treatement incl PCC padding , loose surface and removing the debris to a distance n exc 50 mtr depositing where directed complete all as specified.

M&L Water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete all as specified and directed.

(i) M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete all as specified and directed.

(ii) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm complete all as specified and directed.

(iii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces complete all as specified and directed.

(iv) Laying 3 mm thick unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction complete all as specified and directed.

(iv) Applying two coats of bituminous base aluminium paint including preparation complete all as specified and directed.

M&L 25mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate finishing cement concrete surface even and rough complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets complete all as specified and directed.

S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed.

S&F Grating doom 100 mm dia of PTMT (min. weight 25 gms) complete all as specified and directed.

S&F in repairs Vireous china wash down water closet pan(pedestal pattern),white(excluding fixing bolts, flushing cistern and flush pipe) with Plastic water closet seat black,closed pattern with flat bottom and, cover and mild steel chromium plated or aluminium hinging device and wash down water closet(pedestal pattern) complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with bead incl Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane complete all as specified and directed.

3 mm thick sheet frosted glass and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane complete all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair bib tap fancy type chromium plated screwed for iron pipe of 15mm bore complete all as specified and directed.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

S&F in repair Angle valves 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs Brass CP shower rose 125mm size complete all as specified and directed.

S&F Aluminium anodised Tubular towel rail 20mm dia, D type, 60cm long between flanges incl bracket etc. fixed in repair complete all as specified and directed.

S & F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M & L Non Skid ceramic Coloured joint free tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar with CM 1:4 complete all as specified and directed.

M&L for glazed ceramic tiles colour 350x250x7mm / 450x350x7mm thick in vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles complete all as specified.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

M & L for 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM in 1:6 finished even and fair without using etra cement.complete all as specified and directed

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) two layer ( 10 mm+5mm) and finished even and smooth without using extra cement. including mixing of water proofing compound.Note :- Water proofing compound shall be measured & paid seperately.complete all as specified and directed

M & L for rendering 5 mm thick in C:M 1:3 on chajja,Ceiling in patches and finishes and smooth complete all as specified and directed

Supply only Integral Water proofing compound.complete all as specified and directed

Complete Removal of existing treatment of old wall surfaces,complete all as specified and directed

Preparing old wall surfaces complete all as specified and directed.

Preparing new wall surfaces complete all as specified and directed.

Priming plastered and other surfaces with alkaliresistant priming paint complete all as specified and directed.

M&L for 1 mm thick wall care putty on wall complete all as specified and directed

M&L for 1 coat Oil emulsion distemper on wall, complete all as specified and directed

M&L for subsequent coat Oil emulsion distemper on wall complete all as specified and directed

M & L preparation of New plastered surfaces of ceilig and applying three coats of white wash complete all as specified and directed.

M & L preparing of old surface of ceilig and applying one coats of white wash complete all as specified and directed.

Material & Labour for preparing surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

Taking down steel tubing and connections including cleaning for refixing or removal form site for 15mm bore pipe complete all as specified and directed.

Taking down steel tubing and connections including cleaning for refixing or removal form site for 20mm bore pipe complete all as specified and directed.

Supply & laying of CPVC pipes 16 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors ,complete all as specified and directed

Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed

S&F in Repair 15 mm bore Brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe and fixed with complete accessories complete all as specified and directed .

M & L for cutting chases, pinning in brick walls/ stone concrete block or slab walls , making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings , steps, cills, sunshades, shelves, lintels etc; and cutting chases for concealed water tubing or cocealed conduit wiring, etc and making good , cutting not exceed 10 cm girth complete all as specified and as directed.

Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

S&F, PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S & F PVC (SWR) bends any radius, 75 mm bore complete all as specified and directed.

PVC (SWR) 110mm bore 'T' equal or unequal complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe with access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 75 mm bore of pipe with access door complete all as specified and directed.

M&L for providing PCC 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary farmwork etc.

M&L for pressed steel door frame size 125 mm x 60 mm and 1.25 mm thick including necessary fixing lugs, hinges, lock strike platee etc., complete, as spd

S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors etc complete.

S & F factory made 35 mm thick plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed.

Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F, Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engr-in-charge

S&F alluminum alloy, anodised, sliding door bolt with hasp & staple (bolt type) and length of 250 mm long etc.

S & F Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 150mm long complete.

S&F framed work such as grills, gratings and holdfasts etc with ends of bars shouldered and or reiverted or forged into spikes, framed guard bars and similar work conferming to Fe- 290-0 Gde-E-165

S&F aluminium powder coated window sliding type (3 track), 1.5mm thickness of frame and shutter with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc and making good the jambs and painting with existing surface matching, complete all as specified and directed by Engr-in-Charge

S&F aluminium powder coated louvered ventilators of 1.50mm thick frame including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching, complete all as specified and directed by Engr-in-Charge

S&F galvanised MS wire cloth, 0.56mm nominal dia of wire average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M & L preparation of Old steel surfaces of any description over 10 cm width or girth & applying one coats of synthetic enamel paint complete all as specified and as directed.

S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed by Engr-in-charge.

S & Fin repair for Stop valves, cast copper alloy, screwed down, high pre-ssure, with butterfly handle, screwed both ends for iron pipe or for unions and fixed , 15 mm fixed complete all as specified and directed.

S & F in repair for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed , 20 mm fixed complete all as specified and directed.

S & F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 300gms) fixed complete all as specified and directed.

S & F in repair for Soap dish, any type, fixed to plugs with chromium plated brass screws fixed complete all as specified and directed.

S & F for PVC connections 15 mm size with PTMT nuts of length 600mm fixed complete all as specified.

S & F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) fixed in repairs complete all as specified and directed.

S&F in rep Vitreous china WHB 550x400mm on exsting brackets , fixing flat back or angle back type with PVC (hdpe) 32 mm dia waste pipe, brass coupling 32 mm CP etc complete all as specified and directed.

S&F PVC low level flushing cistern of capacity 10 litres complete with siphon handle lever float valve and PVC bend including connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed.

Removing old tar felt, all loose dirt,old roof tiles,cleaning the concrete surface including removal & cleaning of vegetation, fungus,moss small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work and applying neat cement slurry @ 1.5Kg/Sqm complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in CM 1:3 mixed with water proofing compound @ 2 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.(Note-WPC will be measurd and paid seprately)

Applying evenly a coat of blown type bitumen at the rate of 0.30 kg per square metre complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.

Applying two coats of aluminum paint on top of membrane @ 0.20Kg/Sqm complete all as specified and directed.

M & L for Providing and injecting chemical emulsion for Post Constructional Anti Termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per q. M of the vertical surface of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc complete all as specified and directed.

M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L Hardcore of gauge exc. 63 mm but n exc.100 mm of broken bricks, deposited spreaded and levelled in layer n exc. 15 cm thick water and rolled to a true completed as specified as directed

Material and labour for 100 mm thickcement concrete type C-2 1:3:6 (40 mm graded stone aggregate) as in subbase etc complete all as specified and directed.

M&L 75 mm thick as in sub base in CM 1:2:4 type B2(using 40 mm graded stone aggregate) complete all as specified and directed.

M & L providing, cement concrete type B1 1:2:4 (20 mm graded aggregatet)t in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

M&L 100 mm thick as in sub base in CM 1:4:8 type D2(using 20 mm graded stone aggregate) complete all as specified and directed.

M&L for 50 mm thick Sand cushion under floors complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment, confirming to IS 15658-2006of 60mm thickness M 35 Grade complete all as specified and as directed.

Dismantling water tanks capacity exc 250 Ltr and n exc 500 Ltr and removing from site complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out,sof/loose soil complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 150 mm internal dia of pipe complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L, 150 mm dia Sail-glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

M&L for 150 mm dia,Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embeded in concrete complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil complete all as specified and directed.

M&L Mild steel works as in posts and struts,truss,purlin,wind tie,plate , fencing post , Railing,Hollow pipe, flat iron cutting tops to shape as directed, drilling holes, all necessary drilling, bolting or riveting, etc; including embeding in concrete and screwing etc. and similar work conforming to Fe-290 Gde E-165

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for plain cement concrete type B2,1:2:4 (40 mm graded stone aggregates) as in post holes complete all as specified and directed.

S&F in repair 18mm thick, PVC sheet one side pre-laminated of approved texture ("Celuca Ply of Rajshree make or equavalent as approved by GE) as in Kitchen cabinet (with shelves and partitions) including necessary fittings & fixtures as per manufacturer's instruction complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specically provided for complete all as specified and as directed.

M&L for RCC (Nominal mix) 1:2:4 type B1 using 20mm graded aggregate as in column etc complete all as specified and as directed.

S&F plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes without any attachment Fe-290 Gde E-165 complete all as specified and as directed.

Mild steel screw bolts (machine made) with hexagonal or square heads at one and screwed the other, or screwed both ends, each screwed end to be fitted with washer and one hexagonal of square nut exceeding 10 cm but n exe 15 cm long and 11 to 15mm dia of shank complete all as specified and as directed.

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, driling holes, notching for wire and flat iron fillets for securing wire mesh etc including all necessary driling, bolting or riveling etc and similar work confirming Fe 410-0 or fe 310-0 complete all as specified and as directed.

S&F gavnished 2 stand steel barbed wire 2.24mm dia barbed with 2mm dia barbed at 75mm spacings and striling and finishing to any type of standerd solls staining bolts, including recuring security laying at craining with and provision of galvanished milds complete all as specified and as directed.

Supply, laying and fixing of galvanised punched tape concerina coil complete having galvanised spring and core wire 2.5mm dia with 500mm dia cold drawn steel, galvanised punched of low carbon steel having series of sharp barbed unifomily punched along its length 550nos, barbs on properly per revaolution crimped on steel spring core wire weight 9.2 kg each coil complete all as specified and as directed

Taking down carefully any type point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and directed.

Taking down carefully Main switch and Distribution boards any make and size .

Taking down the ceiling fan/exhaust fan in situ and refixing after cleaning complete all as specified and directed.

Taking down carefully Old unserviceable any type sub main wiring with wooden batten/PVC surface conduit of any size and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and directed.

M/L for Sub Main Wiring two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 6.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :-Two Nos of 6.0 Sqmm Wire and one No of 6.0 Sqmm Earth wire in One RM length Measured as one unit length.

M/L for Sub Main Wiring with two single core PVC insulated cable of size 4.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 20mm dia with all conduit fitting,fixing accessories and 4.00 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :- Two Nos of 4.00 Sqmm Wire and One No of 4.00 Sqmm Earth wire in One RM length Measured as one unit length.

M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor FRLSH cable 1100 volts grade drawn into and including concealed/open PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge.

(a) One light point/Bell point controlled by one switch.

(b) One fan point controlled by one switch.

(c) One socket point controlled by one switch on same board.

(d) One socket point controlled by one switch on Independent board.

Description all as per item No 169 here in befor but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 2.5 Sqmm solid copper conductor PVC for 3 pin switch socket outlet15 Amp independent board complete all as specified and directed.

S & F in repair for bell ding dong AC 230 volts single pole one way complete all as specified and directed.

S & F in repair for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed.

S & F in repair for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed.

S & F in repair for switch socket combination 3 pin 5 and 16 Amps AC 230 volts flush type complete all as specified and directed.

S & F in repair for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed.

S & F in repair fan regulator Step type of polycarbonate complete all as specified and directed.

Supply and fixing in repair of LED lamp rotary type/holder type of 9 watt complete all as specified and directed.

Supply and fixing in replacement of decorative wall light fitting WITH LAMPS 12 WATT made up of Polycarbonate , City-1 , Cylindrical shape , with LED lamp 9 Watt complete with fixing arrangements on wall complete all as specified and directed.

Supply & Fixing Smart bright Batten Series, LED luminaire using LED 22 watt 110 Lumens/watt with diffuser which ensures uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminium housing, Energy efficient, Flicker free start Inbuilt driver unit, Suitable for wall and ceiling mounting using brackets with and including the luminaire testing on completion as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl),

S & F in repair of LED Decorative /mirror light fitting 10watt along with fixture Surface mounted suitable for indoor aplication , connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge.

S&F in repair Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size & length complete all as specified & directed.

Supply & fix in replacement of LED Security Light Luminaire 25 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.

Supply & fix in replacement of LED Security Light Luminaire 35 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.

S & F in repair Sheet metal enclosure DBs Tripple Pole and Neutral 4- way with 200 Amps rated bus bar 415 volts single pole and neutral complete double door complete all as specified and directed.

S & F in repair MCB TPN 415 volts 63 Amps, C Series complete all as specified and directed.

S & F in repair Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed.

Supply and fixing in replacement MCB single pole and neutral 240 volts 40 Amps, B Series complete all as specified and directed.

Supply and fixing in replacement MCB/Isolators single pole 240 volts upto 40 Amps, B Series complete all as specified and directed.

Supply & Fixing in repair modular AC box (earth plug socket) complete with 01 number single pole MCB 20 Amps complete all as specified & directed.

Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.

S & F in repair for bell push piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed.

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.

Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, PVC body complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.

Supply and fix Geyser 25 ltr with fitting arrangements complete all as specified and directed.

Supply and install electric chimney max 1000cum complete all as specified and directed.

Supply , laying and testing in repairs XLPE insulated cable , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cable ( Heavy duty ) 1100 volts grade with stranded aluminium conductor cable of size 2 core 16 Sqmm complete all as specified and as directed .

Supply and lay DWC pipe 38mm ID 63m OD complete all as spcified and as directed.

Please Enable Macros to View BoQ information