SPECIAL REPAIRS TO BLDG NO IV/2 (PARTLY) AT ASC (SUP) TYPE D P-03/01 AT SOL AND T-05 UNDER GE CHENNAI

Amount

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

M&L for flyash brick work with old size bricks straight or curved on plan exc 6M mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc, and removing unserviceable material outside cantt area, complete all as specified and directed.

M & L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for complete removal of existing treatment of old surfaces of wall and applying plaster of paris putty of 1 mm thickness over newly plastered surface to prepare the surface even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed.

M & L for Complete removal of existing treatment & applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of new plastered surfaces of walls complete all as specified and as directed. Make : APEX of Asian or equivalent of Shalimar / Nerolac/ Berger.

Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of new plastered surfaces of walls complete all as specified and as directed. Make : APEX of Asian or equivalent of Shalimar / Nerolac/ Berger.

M & L for Preparation of new plastered surfaces of wall and applying plaster of paris putty of 1 mm thickness over newly plastered surface to prepare the surface even and smooth and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed.

M & L for 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc 10 mm thick im CM 1:6 and 5 mm thick in CM 1:4 mixed with water proofing compound as per manufacturers instruction & finished the surfaces even and fair without using extra cement, complete all as specified and directed. note : WPC WILL BE MEASURED AND PAID SEPERATELY

Supply only Liquid water proofing compoud

M&L for preparation of old plastered surfaces of wall and applying one coat of weather proof acrylic emulsion paint (exterior grade, Apex ultima) on wall surfaces complete as per manufacturers instructions complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of oil bound distemper on wall surfaces complete all as specified and directed.

M & L for complete removal of existing treatment on wall surfaces and washing, rubbing down and applying two coats of oil bound distemper over a coat of alkali resistant primer and 1 to 1.5 mm thick plaster of paris on old surfaces of wall complete all as specified and as directed.

M & L for applying two coat of synthetic enamel paint over a coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 Cm girth or width complete all as specified and as directed.

M & L for Applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surface based materials of any description , not other wise described over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

M&L for applying two coats of synthetic enamelled paint over a coat of red oxide on steel or iron surface based materials of any description , not other wise described n.exc 10 cm width or girth including preparation of old surfaces complete all as specified and as directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GIbased Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding towel, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Steel work FE-410 in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S&F Mild steel screw bolts 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n. exc 5cm long complete all as specified and as directed.

M&L for Plates (plain or chequered)channels, square cut or notched(ordinary and counter sunk)forming holes, without any attachment confirming to Fe 410 - W (Grade E-250 Quality -A ) complete all as specified and as directed.

Cutting openings, through brick walls built in cement mortor or lime mortor for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaningand stacking bricks, removing surplus serviceable bricks, hard-core,etc.. to store and rubbish not exc. 50m complete all as specified and directed.

M&L for providing cement concrete typeB1 1:2:4 (20mm graded aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each all as specified and as directed by the Engineer-in-Charge.

Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M & L for galvanised powder coated snap grid framework of size 605 x 605mm for false ceiling all as specified including vinyl laminated MPL gypsum panels ( GYPTECH) 9mm thick of size 60 x 60 cm fixing with staples on snap grid by means of GI wires not less than 4mm dia hooks and raw plug etc centre of make. GYPTECH /ARMSTRONG or equivalent complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F Sheet glass 5.5mm thick, plain ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane fixing to aluminium frame work (any thickness, size, quality or description ) from Aluminium section fixed with beads/glazing clips complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener all as per specification complete all as specified and directed.

S&F Factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing and all as directed.

&F Factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & back face, supplying and fixing in frame at site as complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F stainless steel 100 mm butt hinges medium weight ISI marked complete all as specified & directed.

S&F Aluminium anodised barrel tower bolts of extruded section 100mm long all as specified.

S&F Aluminium handles cast type anodised 100 mm size complete all as specified and directed.

S & F in repairs Aluminium (Die cast ) body door closer hydraulically regulated, designation No.2 universal type, suitable for door shutters up to 701mm to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed.

M & L in repairs stainless steel curtain rods with L clamps and with suitable globe brackets and brass screws all as specified

M& L in repairs mortice lock vertical type mild steel size 100 mm 4 levers with stainless steel handle set suitable for right or left, inside or outside opening doors complete all as specified and directed.

M& L in repairs mortice lock vertical type brass size 100 mm 4 levers with stainless steel handle set suitable for right or left, inside or outside opening doors complete all as specified and directed.

S & F in repair 2nd class hardwood Boarding with nails in any situation (except flooring and skirting) fixed in ceiling clean sawn with butt joints complete all as specified and directed.

S&F aluminium powder coated (Minimum thickness of powder coating 50 micron) frame for doors/windows/ventilator/partition, glazing clips with one or more tracks including joining cleats fot fixing complete all as directed by Engr-in-Charge.

S&F Anodised aluminium door shutters powder coating of any colour (Thickness or powder coating not less than 50 micron), aluminium section weighing 1.23kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified

S&F Anodised aluminium door shutters powder coating of any colour (Thickness or powder coating not less than 50 micron), aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified

S & F aluminium powder coated sliding window 3 track using aluminium section weighing not less than 0.495 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including aluminium anodised snap beads, screws and fixed along with same section in three rolling sliding shutters two for fully glazed with 4mm thick tinted glass fixed with glazing clips, and one for aluminium wire mesh shutters) etc (The rate is inclusive of all fixings of builders hard ware such as wirmesh, hinges, bow handles, locking arrangements etc complete all as specified and as directed.

S&F aluminium powder coated ventilators using alumimium section weighing not less than 0.48 Kg per RM for frame louvers aluminium anodised snap beads, screws and fixed alongwith with 4mm thick frost/pin headed glass fixed with glazing clips, and one for wiremesh shutter fixed on frame etc .The rate is inclusive of all fixings of builders hard ware such as wirmesh, hinges, bow handles, locking arrangements etc complete all as directed by Engr-in-Charge.

S&F aluminium anodised powder coated (minimum thickness of powder coating 50 micron) window security grills DG 104 with frame 6mm thick 75 mm aperture fixed with joining cleats etc complete all as specified and as directed.

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F 5mm thick figured glass, pin head type and fixed to aluminium window in squares exc 0.50 sqm in each pane complete all as specified and as directed.

S & F 12 mm thick Prelaminated Particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to aluminium/ timber frame work complete all as specified and as directed.

S&F 140mm long Floor door stopper of aluminium alloy, body & tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

Roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding(but not backing) and rubbish off the premises complete all as specified and as directed.

M & L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M & L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 Sqm but not exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

All as per item No. 57 above but on skirting/dado including backing coat of 10 mm thick in CM 1:4 complete all as specified and as directed.

M & L for glazed ceramic coloured tiles in vertical surface 300x250x7mm/450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including Rendering 10mm thick in CM 1:4 for receiving wall tiles on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and as directed.

Supply & Laying of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete all pipe fittings and including taking up or down in the existing pipe line completely all as specified for following pipes :- (a) 25mm outer dia bore

(b) 32mm outer dia bore

S&F Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 2000 ltrs including dismantling of existing tank of any description and removing to store and S&F 25 mm ball PTMT Ball valve high pressure with epoxy coated aluminum rod and polyethylene high density float screwed for iron pipe complete all as specified and directed.

M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 32mm dia bore pipes complete all as specified and as directed.

S&F in repairs toilet paper holder with flap recessed type matt chromium plated as per cat No.BA-48 of Make Prayag all as specified and directed.

S&F in repair 15mm dia two way bib cock with flange, chromium plated of make Prayag all as specified and directed

S&F in repairs 15mm dia pillar taps cast fancy type copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed.

S&F in repairs 15mm dia concealed Brass Angle stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and directed.

Supply and fix in repair PVC connections 15 mm size with two brass nuts of length 450 mm complete all as specified and as directed

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S & F in repairs Vitreous china wash down water closet (pedestal pattern ) white (ETWC) and fixed including Plastic seat cover, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device complete all as specified

S&F in repairs PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe, etc.and connected to water closet as per manufacturer's instruction and as directed by the Engineer in charge

S&F vitreous china wash basin white flat back size 550x400mm including cutting for and pinnning in ends of brackets or erecting stand but excluding taps, wastes chain and plug and porcelain stopper but including brackets brackets and 32mm waste coupling and waste pipe fixed in repairs complete all as specified and directed.

S&F in repair 20mm dia Tubular towel rail 600mm long between flanges 'D' type brass chromium plated, fixed to wall with brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repairs glass shelf superior quality matt finished chromium plated (MCH/Colour CP ) of size 600mm long with bracket and fittings of make that shall match with existing fitting i.e., Prayag complete all as specified and directed.

S&F in repairs CP Towel ring of make that shall match with existing fitting i.e., Prayag complete all as specified and directed.

S & F PVC (SWR) pipes 110mm single socketed, in any length with rubber ring joints laid in trenches or in floor complete including dismantling existing pipes along with fittings all as specified and directed.

S & F PVC (SWR) pipes 75mm single socketed, in any length with rubber ring joints laid in trenches or in floor complete including dismantling existing pipes along with fittings all as specified and directed.

S & F PVC (SWR) bends 110 mm bore any radius with oval access door complete all as specified and directed.

S & F PVC (SWR) bends 75 mm bore any radius with oval access door complete all as specified and directed.

S & F (SWR) vent cowl suitable for 110 mm bore pipe complete all as specified and as directed.

M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Cutting holes into or through brick walls but in brick walls superficial area n.exc 150sqcm built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete. and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in sub base finishing surface even and smooth without using extra cement complete all as specified and directed.

Taking down carefully copper/aluminium point wiring light, fan, socket or power complete with fittings such as switches, ceiling roses,regulators sockets etc and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed.

Taking down carefully by unservicable fittings of different size and capacity complete and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified

M&L for point wiring of size 1.5 sqmm with PVC insulated unsheathed multistranded copper conductor cable of 1100V grade drawn through new non metallic rigid PVC conduit including accessories, concealed in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing modular switches,sockets, fan regulators etc., including provision of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly complete for :- (a) one light point controlled by one switch

(b) one fan point controlled by one switch

(c ) one 3 pin socket outlet 5 amps on the same board controlled by one switch.

(d) one 3 pin socket outlet 5 amps on independent board controlled by one switch.

(e ) one bell/buzzer point controlled by one bell push

All as per item No 87 above for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed.

All as per item No 87 above for one 3 pin socket outlet , 15 amps control by one switch independent board with cable 4.0 sqmm size complete all as specified and directed.

M&L for point wiring of size 1.5 sqmm (two run) with PVC insulated unsheathed multistranded copper conductor cable of 1100V grade drawn through non metallic rigid Existing PVC conduit , in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing modular switches,sockets, fan regulators etc., including provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly complete for :- (a) one light point controlled by one switch

(b) one fan point controlled by one switch

(c )one 3 pin socket outlet 5 amps on the same board controlled by one switch.

(d) one 3 pin socket outlet 5 amps on independent board controlled by one switch.

All as per item No 90 above but for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed.

S & F for modular cover plate with frame 3 module complete all as specified and directed by Engr-in-Charge

S & F for modular cover plate with frame 4 module complete all as specified and directed by Engr-in-Charge

S & F for modular cover plate with frame 6 module complete all as specified and directed by Engr-in-Charge

S&F modular switches suitable for type AC 240V, 6 amps 1 module complete all as specified and directed by Engr-in-Charge

S&F modular sockets suitable for type AC 240V, 6 amps 2 module complete all as specified and directed by Engr-in-Charge

S&F modular switches suitable for type AC 240V, 16 amps 1 module complete all as specified and directed by Engr-in-Charge

S&F modular power sockets suitable for type AC 240V, 16 amps 2 module complete all as specified and directed by Engr-in-Charge

S&F modular fan regulator suitable for type AC 240V, 2 module complete all as specified and directed by Engr-in-Charge

S&F modular bell switch suitable for type AC 240V, 16 amps complete all as specified and directed by Engr-in-Charge

S&F call bell buzzer of ding dong type A/C 230 volts complete all as specified and directed by Engr-in Charge

S&F ceiling rose , polycarbonate, isolated body with 2 to 3 terminals complete all as specified and directed by Engr-in Charge

Taking down ceiling fan and exhaust fans of any size and any description including connected accessories and deposited in AGE E/M store complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator( 2 Modular) and accessories, 230 V, 1200 mm sweep, Five star rated with brushless direct current motor, complete all as specified and directed

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m, 5 star complete all as specified and directed

S & F 20 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete all as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSNEOBS20WLED865SPCSSIND or techno commercial equivalent Philips/Bajaj.

S & F 36 Watts 2x2 ceiling COOL LIGHT a versatile 2X2 surface mounted luminaries and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed. Make Havells Cat No. PLANOSUR2X2PLS36WLED865G2S or equivalent in Philips/Bajaj.

S & F 36 Watts 2x2 ceiling COOL LIGHT a versatile 2X2 recess mounted luminaires which suits various ceiling types with option to add mounting kits for POP ceiling & suspension clamp for pendant mounting from true ceiling, complete all as specified and as directed by the Engr-in-Charge. Make Havells Cat No. VENUSNEO2X2PLR36WLED865G2 or equivalent to Philips/Bajaj.

Taking down sub main wiring any type and any size complete after taking proper disconneting of electric supply properly and making surface good complete all as specifided and directed

S&F sub main wiring complete with two runs of 6 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metalic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceiling with one run of 6 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor all as specified and directed by Engr-in-Charge. Note:- Two runs of PVC insulated cable 6 sqmm + one run 6 sqmm of earth wire and one run of conduit including accessories shall be measured as one length.

S&F sub main wiring complete with four runs of 16 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metalic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceiling with one run of 16 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor all as specified and directed by Engr-in-Charge. Note:- Four runs of PVC insulated cable 16 sqmm + one run 16 sqmm of earth wire and one run of conduit including accessories shall be measured as one length.

S&F sub main wiring complete with two runs of 4 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metalic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceiling with one run of 4 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor all as specified and directed by Engr-in-Charge. Note:- Two runs of PVC insulated cable 4 sqmm + one run 4 sqmm of earth wire and one run of conduit including accessories shall be measured as one length.

S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volt 6 way MCB DB, TPN with 200 Amp rated bus bar conforming to IP 38 protection including taking down old ones complete all as specified and directed.

S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 415 volt 8 way MCB DB, SPN with 200 Amp rated bus bar conforming to IP 38 protection including taking down old ones complete all as specified and directed.

S&F MCB of rating 415 Volts, TPN 100 Amps complete all as specified and directed by Engr-in Charge including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F MCB of rating 240 Volts, SPN 40 Amps including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

S&F MCB of Single pole of rating 6 to 32 Amps 240 Volts including taking down complete after taking proper disconnecting of electric supply properly and making good surface complete all as specified and directed.

G.L.THIRUMALAI NAIDU AND COMPANY (BID ID -3347000)

NAVEEN ENTERPRIESES (BID ID -3355506)