WELCOME MAINT SANITARY FITTINGS AND OTHER BR WORK IN OMQ SP AREA OF AGE BR I UNDER GE AF SUBROTO PARK DELHI CANTT 10

Amount

M & L Preparation of old decorative (plastered or unplaster surfaces) and applying one coat of white (lime) wash on wall surface complete complete. all as specified and directed by Engineer-in-Charge.

All as per item No 1 above but on ceiling complete all as specified and directed by Engineer in Charge.

M & L for preparation of old decorated surfaces of walls and applying one coat of oil bound distemper (white/ tinted) on walls complete complete all as specified & directed by Engineer-in-Charge

All as per item No 3 above but on ceilingcomplete all as specified & directed by Engineer-in-Charge

M&L for two coat of hi gloss anti bacterial premium quality interior emulsion lead free with low VOC over a coat of cement base primer applied with mechanical roller to get matt finish on wall surface complete all as specified and directed by Engineer-in-Charge

M&L for grinding existing surfaces complete through electrically operated dust free grinder including preparation of surfaces with the help of dust free mechanical sanding machine complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old surfaces and applying one coats of cement based paint complete all as specified and as directed by Engr-in-Charge.

M&L preparation of old plastered surface of walls/ceiling and applying 1-2 mm thick wall care putty complete all as specified and directed by Engineer-in-Charge

M & L for preparation of old painted wooden/steel/concrete surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in charge.

Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. Raking out joints , hacking for key and scrubbing down with water complete all as specified and as directed by Engr-in-Charge.

M&L for 15 mm thick rendering of cement mortar 1:6, on brick work or concrete surfaces on wall and finished the surface even and smooth all as specified and directed by Engr in Charge.

M&L for 5 mm thick rendering with cement mortar CM 1:3, on concrete surfaces as on ceiling, soffit of stair case, chhajjas facia etc including cement slurry etc finished the surface even and smooth all as specified and directed by Engr in Charge.

M/L for preparation of new plastered surface of walls and applying two coats of OBD over chalk whitening complete all as specified and directed by Engineer-in-Charge

M&L for preparation of newly plastered or unplaster surface and applying two coats of OBD on ceiling complete all as specified and as directed by Engr-in-Charge.

S&F in repairs PVC sheet cover for One pieces EWC soft closing type complete all as specified and as directed by Engr-in charge.

S & F in repair CP mixture for kichen hot and cold water screwed for 15mm bore iron pipe and fixed complete all as specified and as directed by Engr-in-Charge.

S & F in repair CP mixture 2 way for hot and cold water screwed for 15mm bore iron pipe and fixed complete all as specified and as directed by the Engineer in Charge

S & F in repair brass (spindle) for mixture /canceled stop cock for iron pipe 15mm bore fixed complete all as specified and as directed by Engr-in-Charge.

S&F in repair two in one angle valve screwed for 15mm bore iron pipe and fixed complete all as specified and as directed by Engr-in-Charge.

Complete Removal of tree roots from roof top/wall upto 4 story building upto depth 40mm incl make good hole with CM 1:3 and matching painting complete all as specified and as directed by Engr-in-Charge.

M&L for touch-up work area n exc 2.00 Sqm with OBD on wall surfaces in existing matching colour including preparation of surfaces complete all as specified and directed by Engr-in-Charge.

M & L for staining and varnishing wood and wood based surfaces of any description over 10 cm in width or girth and applying thin varnishing including preperation of old treated surfaces complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing the debris out side defence land from the site complete all as specified and directed by Engineer – in – charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and remove the debris outside from MOD land complete all as specified and directed by the Engineer-in-Charge

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls and the like complete all as specified and directed by the Engineer-in-Charge

M&L Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed by the Engineer-in-Charge

Formwork to lintels, cantilevers, shelves including supports, overhangs, etc. etc. Fair finished surfaces of concrete flat complete all as specified and directed

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 5 cm wide & sides of RCC/PCC bands in walls, horizontal or sloping & similar work n exc 5 cm but n exc 10cm wide Roughed finished surface of concrete complete all as specified and directed by the Engineer-in-Charge

M&L 16-18mm th Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 10mm thick screed bed or bedding layer of cement mortar 1:4 complete all as specified and directed by the Engineer-in-Charge

Demolition to brickwork or stone/boulder masonry, built in cement mortar complete all as specified and directed by Engr-in-Charge.

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge

M & L for 75 mm thick PCC (Plain Cement concrete) type D- 2, 1:4:8 (40mm graded aggregate) as in sub-base of floors and paving complete all as specified and directed by Engineer-in-Charge.

M&L for vitrified double charge ceramic tiles 9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/ Skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc omplete all as specified and directed by Engineer-in-Charge ,

M&L for PCC 1:2:4 type B-1(20mm graded aggregate), 25mm thick as in sub base to the tile flooring complete all as specified and directed by Engineer-in-Charge

M&L Glazed printed/ coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by Engineer-in-Charge

S&F anti skid printed and coloured ceramic tiles area of each tiles exceeding 0.06sqm but not exceeding 0.11 Sqm and 7mm thick as in floor set & jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and as directed by Engineer in Charge.

M & L 15 mm thick screed bed or bedding layer of cement mortar (1:6), for laying of floor finishes complete all as specified and as directed by Engr-in-Charge.

M&L for rendering 10 mm thick in cement mortar 1:4 on fair face of brick work or concrete for rough finish complete all as specified and directed by Engineer-in-Charge

S&F in repair 18mm thick PVC foam board (WPC) of density 600kg/cum one side prelam and other side plain for kitchen cabinet shutter including fixing of 0.8mm thick acrylic laminates as edge banding in matching colour over all exposed edge Complete all as specified and directed by Engineer-in-Charge

S&F in repair 18mm thick PVC foam board (WPC) of density 600kg/cum both side plain for kitchen cabinet shutter including fixing of 0.8mm thick acrylic laminates as edge banding in matching colour over all exposed edge Complete all as specified and directed by Engr-in-Charge.

S&F in repair 5mm thick PVC foam board of density 600kg/cum both side plain for kitchen cabinet shutter Complete all as specified and directed. Make Rajshri/ Sintax

S&F 100 mm size Stainless Steel handle, complete all as specified and as directed

S&F 38mm size Stainless Steel Piano hinges complete all as specified and as directed by engr-in-charge.

M &L for ABS body magnetic latches of size 30mm

S&F Stainless Steel telescopic channel 500mm long, complete all as specified and as directed

Taking down frame or Chowkhats (w/o taking off shutter from the frame ) of any description exc. 1.50 Sqm and not exc. 4.00 Sqm each complete all as specified and directed

Taking down frame or Chowkhats (w/o taking off shutter from the frame ) of any description not exc. 1.50 Sqm each complete all as specified and directed

Taking down Door shutter of any description exc. 1.0 Sqm but n exc 2.0 Sqm each complete all as specified and directed by the Engineer-In- Charge.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., size 105x60mm incl frame backfilling with PCC 1:3:6 complete all as specified and directed by Engineer-in-Charge.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., , size 165x60mm incl frame backfilling with PCC 1:3:6 complete all as specified and directed by Engineer-in-Charge.

S&F 35 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class HW glazed and Skeleton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass. Gauze etc complete all as specified and directed by Engineer-in-Charge.

S&F galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperture 18mm complete all as specified and as directed by Engineer-in-Charge.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood surface complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete as per manufacturer’s specification & drawing complete all as specified and directed by Engr-in-charge.

S & F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottoms rails MS frame shall be covered with heat moulded plain colour PVC C Chennel having a PVC sheet strip of 20 MM width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail in either side and as gep insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded and sealed to the styles and rail with suitable PVC sheet beading and joint together with solvent cement, complete as specified and as directed by Engineer-in-Charge.

S&F Butt hinges, medium wt, cold rolled, mild steel of size 100mm complete all as specified and as directed by Engineer-in-Charge.

S&F 125 mm length aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed by Engineer-in-Charge.

S&F 150 mm size aluminium handle, cast type anodized complete all as specified and as directed by Engineer-in-Charge.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engineer-in-Charge.

S&F door stopper of aluminium , alloy body and tongue with hard drawn steel spring fixed in floors of 140 mm overall length of cover plate complete all as specified and directed by Engr -in - Charge.

S& F Aluminium door cill strip Approx length 1m; colour black, shape rectangular, brush type polypropylene, water resistant to seal the gap between door and floor fixed with screw/nail, complete all as specified and directed by Engr -in - Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/Steel/Aluminium frames glazed with putty or fixed with bead. (Old bead to be reused to fix glass) complete all as specified ans directed by engineer in- charge.

S&F 4mm thick frosted float glass and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.

S&F Stainless steel 304 grade wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.

Supply and fixing in reapair windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed shutter with 4.0mm thick glass, mesh shutter with 32 gauge stainless steel mesh, 6mmx12mm flat iron with 10mm square bar M.S. grill and all fitting, fixtures accessories complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(4000 series).complete all as specified and as directed. Note : (i) Glazed shutter with 4.00mm thick glass, Mesh shutter with 32 gauge stainless mesh and M.S. grill as per No. 10,11 and 13 of above mentioned drawing deemed to be inclusive in the rate quoted for unit. (ii) Glass, stainless steel mesh will be fixed to window by authorised rep of manufacture of window only.

M & L for dismantling un serviceable water tanks any description exc 500 but not exc 1000 Liters complete all as specified and as directed by the Engineer-in-Charge

All as per item No 70 above but 250 but not exc 500 Liters complete all as specified and directed by Engr-in-Charge.

S&F for 1000 Litres capacity rotational moulded polyethylene water storage tanks, triple layer (white color) (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed by Engr-in-Charge.

All as per item No 72 above but 500 Liters capacity complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of 20mm dia. complete all as specified and as directed by Engineer-in-Charge.

S&F PTMT valve high pressure with ploythenic float and fly nut complete screwed for iron pipe or brass ferrule 20 mm dia. complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc, complete all as specified and as directed by Engineer-in-Charge.

S&F PVC (SWR) bend any radius of 110 mm dia complete all as specified and as directed by Engr-in-Charge.

S&F in repair bib tap standard or PTMT colour high pressure screwed for iron pipe and fixed (min wt 15mm-90 gms/20mm-125 gms) make prayag complete allas specified and as directed by Engr-in-Charge.

S&F in repairs PVC flushing cistern , 10 Ltrs Capacity low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes complete

S & F in repairs 15 mm bore Stop valves (concealed type) cast copper alloy screwed down high pre-ssure with crutch or but terfly handle screwed both ends for iron pipe or for unions and fixed but fancy type chromium plated with long shank and cup complete all as specified and as directedby Engineer in Charge.

S&F Stop valves 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed by Engineer-in-Charge

S&F in repairs CP Bib taps 15 mm bore long body, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 5mm thick looking mirror with aluminium frame alround and 6 mm thick AC building board at back side with provision of adequate hanging system size appx 450x600 mm sqm or as directed by Engr-in-Charge.

S&F in repair CP shower rose 125 mm square size with arms 15 mm dia 195 mm long with bends 45 mm degree with flange of brass complete all as specified and as directed by Engr-in-Charge.

S&F in repairs CP health faucet including tube 1.2 mtr long complete all as specified and as directed by Engr-in charge Make : Jaquar/Marc/prayag

S&F in repairs fancy type CP pillar tap single leaver basin mixer without popup waste system with 450 mm long braided hoses cat No DRC-37011B make Jaquar or equivalent of any colour for basin 15 mm dia screwed down high pressure with long screwed shank sand fly nuts screwed for iron pipe fixed as in repairs. All as directed by Engineer-in-Charge.

S&F in repairs Fancy type single leaver wall mixer with provision of hand shower, but without hand shower cat No DRC-37119 make Jaquar or equivalent of any colour, 15mm chromium plated screwed down for iron pipes or brass ferrule all as specified in repairs Make Jaquar/Prayag or equivalent as directed by Engineer-in-Charge.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified as directed by engineer-in-charge..

S&F in repair 5mm thick glass sheet shelf 12 mm wide with CP bracket guard and railing 45 cm long complete all as specified and directed by engineer-in-charge.

S&F in repair 5 mm thick glass corner with 12" dia with steel railing and fixed with CP screw & cup washer on wall complete all as specified and directed by engineer-in-charge.

S&F in repairs CP towel rail 600 mm long complete all as specified and as directed by Engr-in charge

S&F in repairs PVC cabinet mirror complete all as specified and as directed by Engr-in charge

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover incl mild steel chromium plated hinging device complete all as specified and as directed by engineer-in-charge.

S&F in repair brass chromium plated waste coupling 32mm bore WHB complete all as specified and as directed by engineer-in-charge.

S&F in repairs 32mm bore and 75cm long PVC flexible waste pipe for WHB complete all as specified and as directed by Engr-in-Charge.

S & F in repair wash hand basins, vitreous china flat back of size 630 mm X 450 mm including cutting for and pinning in ends of brackets or erecting stand including brackets duly painted, etc complete all as specified and as directed by engineer-in-charge.

S&F in repairs Vitreous china wash down water closet pan(pedestal pattern) including connection to drain (or outgoing pipe) and to flushing pipe antisphonage pipe incl all joints complete all as specified and directed by engineer-in-charge.

S&F in repair vitreous china squatting pan “Orissa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, PVC ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by engineer-in-charge.

S&F in repairs sinks made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-charge.

S&F in repairs stainless steel rack for kitchen utensil made out of 22 gauge sheet & overall size 900mm x 750mm fixed to wall with screws complete all as specified and directed by engineer-in-charge.

S & F in repair 25mm dia MS powder coated drapery rod including all necessary fixing arrangement like clamps, end brackets, end to end bracket complete all as directed and specified and as directed by Engineer-in-charge.

Complete Removal of old APP membrane from brick tile/ concrete surface & preparation of surface to received primer/Plaster complete all as specified and as directed by Engr-in-Charge.

M & L for APP based modified pre fabricated five layer, minimum 3 mm thick and weighing not less than 3.60 Kg per Sqm water proofing membrane reinforced with non woven polyester mat 160 gm per Sqm black finished over Bitumen solvent primer @ 0.4 Ltr Sqm conforming to IS-3488, membrane laid by torch application method side overlap of 75 mm and end over lap of 100 mm wide, joint / overlap sealed with torch applications for parapets etc the membrane taken up to 30 Cm than inserted inside the parapet after making necessary groove and making good the damage wall as required after necessary preparation of the surface complete as per manufacture’s instructions and all as specified and directed by Engineer-in-Charge.

M&L 2 coat of aluminum paint incl preparation of newly or previously untreated surfaces of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed by Engr-in-Charge.

M & L for cement concrete 1 : 2 : 4 type B-0 (using 12.5 mm graded stone aggregate) laid as in padding base for tank over roof slabs for providing proper slope including finishing surface even and fair all as specified and directed.

M&L for rendering 10 mm thick in cm 1:4 on fair face of brick work or concrete mixed with water proofing compound complete all as specified and as directed by Engr-in-Charge.

Supply only integral water proofing compound complete all as specified and as directed

Taking down carefully the existing point wiring of any size/capacity and type by disconnecting from the terminals complete including fittings and fixtures such as switches, sockets,ceiling rose, regulators and light fittings etc by unscrewing and removing from site complete all as specified and directed by engg-in-charge. Note :cost of unserviceable materials will be charged from the contractor against schedule of credit complete all as specified and as directed by Engineer-in-Charge.

M & L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated un sheathed multi stranded copper conductor,FRLS 1100 Volts grade, with non metalic rigid PVC medium grade duty conduit/casing capping on wall/roof for surfacing wiring but not less than 20mm dia with accessories such as junction boxes, bends, tees etc. of suitable size including sunk cast iron or pressed steel terminal box for mounting switches, sockets fan regulators etc with 3 mm thick plastic laminated sheet top cover Make : Hylem / Anchor including continuous earth wire PVC insulated 1.50 Sq mm multi stranded copper conductor, FRLS 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for One light /bell/fan point controlled by one 1 way switch complete all as specified and directed by engg-in-charge.

All as per Item No 109 herien before but One three pin switch socket 5 Amps plug point on independent boardcomplete all as specified and directed by engg-in-charge.

All as per Item No 109 herien before but One three pin switch socket 5 Amps plug point on same board complete all as specified and directed by engg-in-charge.

All as per Item No 109 herien before but One bell/buzzer point controlled by one bell push on independent board complete all as specified and directed by engg-in-charge.

All as per Item No 109 herien before but One light point controlled by two 2-way switches, with cables 1.5 sq. mm size including continuous earth wire PVC insulated 1.5 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and directed by engg-in-charge.

All as per item No 109 herein before but point wiring with 2.5 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps Switch including continuous earth wire PVC insulated 2.5 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and directed by engg-in-charge.

M&L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC sheathed FRLS cable, 1100 volts grade IS-694 marked, with multi strandad copper conductors and earth continuity wire with similar 1.5 sqmm cable (incl connecting to earth dolly) concealed in wall including PVC conduit size of not less than 20mm and fittings/accessories all fixed to the surface of walls/ceiling, and also incl sunk type pressed steel terminal box and 3 mm thick plastic laminated sheet top covers for the following :- (Note : Cost of for cutting chesing and making good to disturbed surface all as to match with existing surface are deemed to be included in quoted rate.) One light /bell/fan point controlled by one 1 way switch complete all as specified and directed by engg-in-charge.

All as per item No 115 herein before but One socket out let 5 Amps 5 pin on independent board complete all as specified and directed by engg-in-charge.

All as per item No 115 herein before but One socket outlet 5 Amps 5 Pin on same board with other switches complete all as specified and directed by engg-in-charge.

All as per item No 115 herein before but One bell/buzzer point controlled by one bell push on independent board complete all as specified and directed by engg-in-charge.

All as per item No 115 herein before but point wiring with 2.5 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps Switch including continuous earth wire PVC insulated 2.5 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and directed by engg-in-charge.

Supply and fix in replacement Switch Piano, Flush Button, Single Pole, One Way, 6 Amps, 230 Volts complete all as specified and as directed. Make: Havells/ Anchor/Cona

S&F in replacement of switch piano, flush type, 15 amps, single pole, one way suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge. Make: Havells/ Anchor/Cona

S&F in replacement of socket outlet 2in1, 3 pin 5 Amps flush type suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge. Make: Havells/ Anchor/Cona

S&F in replacement of socket outlet 2in1, 3 pin 15/5 Amps flush type suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge. Make: Havells/ Anchor/Cona

Supply and fix in replacement ceiling rose surface type bakelite 65 x 50 mm with three terminals with ISI mark. MAKE:-ANCHAR,LISHA,Havells

Supply and fix in replacement lamp holder PVC/Poly Carbonate type suitable for batten fittings with ISI mark. MAKE:-ANCHAR,LISHA,Havells.

S&F in replacement Bell push flush type 5 Amps. Make:- ANCHAR,LISHA,Havells

S&F in repairs modular white cover plate with frame 3 module Make Roma/MK/Legrand

S&F in repairs modular white cover plate with frame 4 module Make Roma/MK/Legrand

S&F in repairs modular white cover plate with frame 8 module Make Roma/MK/Legrand

S&F in repairs modular metal flush box frame 1/2 module Make Roma/MK/Legrand

S&F in repairs modular metal flush box frame 3 module Make Roma/MK/Legrand

S&F in repairs modular metal flush box frame 4 module Make Roma/MK/Legrand

S&F in repairs modular metal flush box frame 8 module Make Roma/MK/Legrand

S&F in repairs fan regulator 120W,-1/2 module modular type Make Roma/MK/Legrand

S&F in replacement modular Switch, 5/6 Amps , 1 module,complete all as specified and directed. Make : Crabtree/Legrand/Havells

S&F in replacement modular Switch, 5/6 Amps , 1 module,two way complete all as specified and directed. Make : Crabtree/Legrand/Havells

S&F in replacement modular socket outlet , 6 Amp, 2/3 pin combined, 2 module complete all as specified and directed. Make : Crabtree/Legrand/Havells

S&F in replacement modular Switch, 16 Amps , 1 module,complete all as specified and directed. Make : Crabtree/Legrand/Havells

S&F in replacement modular socket outlet , 6/16 Amp, 2/3 pin combined, 2 module complete all as specified and directed. Make : Crabtree/Legrand/Havells

S&F in replacement steped type electronic fan regulator heavy duty flush type socket size on th existing phenolic laminated sheet complete Make:-ANCHAR,LISHA,Havells

S&F in replacement of call bell, Ding dong type, suitable for 240V AC Complete all as specified and directed by Engineer-in-Charge. Make :ANCHAR,LISHA,Havells

Supply and fixing wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge. Make: Halonix Cat No -HLB-03-20-CW-AL/Philips/Crompton

Supply and fixing wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,10 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round blocks and testing complete all as specified and directed by the Engineer-In- Charge. Make: Halonix Cat No -HLB-03-10-CW-AL / Philips/Crompton.

Supply and fixing MOD ROUND-SURFACE mounting LED ultra slim round down lighter made of PDC AL with high efficient LEDs & Glare free opal diffuser IP20, 9 watt, 6500/3000 K ,230 volt, LED ceiling fitting, complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: Halonix Cat No-HLDLS-R06-12-CW/Philips/Crompton.

Supply and fixing wall mounted LED bulk head fittings, 10 watt, 2700/6000K,, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge. Make: Halonix Cat No- HLBH-02-10-CW/Philips/Crompton Greaves.

Supply and fix in replacement of Name plate light with 9/10 watt recessed mounted reflacted outdoor type with PDC aluminium body heat dessipation and high transmittance diffuser 3000/6000K including fixing in wall/pillar for suitable of LED light fitting and make good complete all as specified and directed by engineer-in-charge. Make :- Havells/Philips/CG.

Supply and fix in replacement of ceiling light with 18 watt recessed mounted round LED Downlights with PDC aluminium body heat dessipation and high transmittance diffuser 3000/6000K including fixing in ceiling/POP for suitable of LED light fitting and make good complete all as specified and directed by engineer-in-charge. Make :- Polycab Cat No LD00125037 or its equivalent in Philips/CG.

S&F in replacement fan capacitor 2.5 Mfd Make :- Epcos/Usha/Asian/Havells

Supply & fix in replacement metal clad socket single pole and neutral sheet metal enclosure with and 20A earth plug and socket complete with one single pole MCB 20 amp 240 Volts all as specified and directed. Make : Leagrand / Havells / Anchor / L&T.

M & L in replacement sheet metal enclosure with double door category of protection type IP-42 factory made with tinned copper 200 Amps rated bus bar suitable for MCB SPN 240 Volts, 2 way concealed in wall such as front cover shall be seen flush with the wall surface all as specified and directed. Make : Havells/L&T/Legrand

All as per item No 151 herein before but 4 way

M & L in replacement sheet metal enclosure with double door category of protection type IP-42 factory made with tinned copper 200 Amps rated bus bar suitable for MCB TPN 415 Volts, 4 way concealed in wall such as front cover shall be seen flush with the wall surface all as specified and directed. Make : Havells/L&T/Legrand

All as per item No 153 herein before but 8 way

S&F in repairs MCB Triple pole and neutral 63/100 Amps working on 415 volts 50 Hz AC supply,10 KA C series. Make : Havells/L&T/C&S/Legrand

S&F in repairs MCB single pole and neutral 32/40 Amps working on 240 volts 50 Hz AC supply,10 KA C series including taking out old one. Make : Havells/L&T/C&S/Legrand

S&F in repairs MCB single pole 6 to 32 Amps working on 240 volts 50 Hz AC supply,10 KA C series. Make : Havells/L&T/C&S/Legrand

S& F in replacement sub main wiring with two single core PVC insulated unsheathed cable 1100 volts FRLS grade with multi strand copper conductor and drawn through and including PVC conduit along with continuous earthing wire but in green colour complete on surface/concealed and connected to common earth dolly of the following size. Note : Three run of PVC cable and one run of PVC conduit shall be measured as one unit length.

(a) 4 Sqmm ( 2 single run of 4 Sqmm and one run of 4 Sqmm as earth wire)

(b) 10 Sq.mm ( 2 single run of 10 Sqmm and one run of 10 Sqmm as earth wire)

Taking down and disconnecting of old unserviceable sub main wiring of any type and size from various side and removing to store for taking credit (credit for above items should be made as per conditioned separately) Complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement LED Bulb 07/09 watt thread type 3000k/6500k . Make SYSKA /Havells/Wipro

Supply and fix in replacement LED Bulb 07/09 watt pin type warm white Make SYSKA /Havells/Wipro

Supply and fixing wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,20 watt LED fitting with tri colour 3000 K (warm white), 100 lumen/watt, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge. Make: Halonix/Havells/Crompton or equevalent

Supply and fixing in replacement PVC gang box suitable for one switch 5 Amps with screw and necessary arrangement complete all as specified and as directed by Engineer in Charge.

All as per srl item No. 163 above but for one 15 amps switch socket outlet complete all as specified and as directed by Engr-in-Charge.

M & L for rigid non metalic PVC medium grade conduit in repairs including junction boxes, tee, bends, elbows, reducers bell mouth tube ends,fixing accessories such as couplers, lock Nuts, saddle pipe hook etc for 25 mm dia.ISI Marked complete all as specified and as directed by Engineer-in-charge.

M & L for PVC casing caping medium grade including, tee, bends, elbows, ends,fixing all accessories etc for 20 mm . ISI Marked complete all as specified and as directed by Engineer-in-charge.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in deep for foundation of pole/stay/cable etc and getting in soft/loose soil complete all as specified and as directed by Engineer-in-charge

Returning refiling including spreading, leveling, watering and well raming in layers each not exceeding 25 cm thickness complete all as specified and as directed by Engineer-in-charge.

Removing surplus spoil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge.

Sand cushioning for under ground cables provided with a layer of sand 8 cm deep before laying the cable and 15 cm depth after punning down and stretching the cable all as specified and directed by engineer-in-charge.

Supply and lay well burnt as class ‘B’ bricks as mechanical protection to under ground cables laying with length of the bricks equal to the width of the trench all as specified and directed by engineer-in-charge.

Supply and laying GI tubing light grade of size 40 mm dia with all fitting for protecting the cables in tranches,floors,on poles,in walls complete all as specified and as directed.

Supply,laying, jointing,testing LT cable 1100 volts grade, PVC insulated armoured and PVC sheathed with stranded aluminium conductor heavy duty, including cable glands, cable lugs etc. to suit the cable size, laid in trenches, fixed along the poles bare or through G.I. Pipe laid under floors road etc; fixed concealed in walls encased in G.I. Pipe etc. complete of following sizes:-

LT Cable 10 Sq mm, 2 core

LT Cable 25 Sq mm, 4 core

LT Cable 35 Sq mm, 3.5 core

LT Cable 70 Sq mm, 3.5 core

Taking down and disconnecting of old unserviceable LT U/G cable of any type and size from various side and removing to store for taking credit (credit for above items should be made as per conditioned separately) Complete all as specified and directed by Engineer-in-Charge.

Taking down and disconnecting of old unserviceable street/flood/post top/garden/bollard light fittings of any type and size from various side and removing to store for taking credit (credit for above items should be made as per conditioned separately) Complete all as specified and directed by Engineer-in-Charge.

Supply & Fix in replacement of LED Street Light 45 watt, LUMOS-SUPER Highly LED street light made of pressure dia cast aluminium housing with high power LEDs, lens & toughened glass, IP66, light distribution Efficacy>110Lm/W. 5700K. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V . Make Halonix Cat No-HLSLD-15-45-CWL-R/Halonix/Philips/CG

Supply & Fix in replacement of LED Post Top Lantern 25 watt with die cast aluminium spigot, spun aluminium powder coated top cover, Aluminium PDC heat sink, opal PC diffuser and clear arcylic. IP65, Optics: PC lenses with Toughened Glass, electronic driver with input voltage range of 170 to 280V. Make Halonix Cat No- HLPT-04-25-CW/Philips/Bajaj.

M&L earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm, burried vertically in ground ( earth pit not less than 2.25 m deep below normal ground level) with top edge of plate vertically to a depth not less than 1.5m below ground level, connected to galvanised steel earth lead wire 4.00 mm dia ( 8 SWG) of any length as reqd at site, by means of bolts, nuts, check nuts and washers of galvanised steel, earth lead wire encased in and including 15mm bore G.I. light grade pipe from earth plate upto pole, upto 2.40 M height from GL by means of and including 25 x 3 mm M.S.F.I. Clamps, bolts, nuts and washers etc. and GI Earth lead wire poles/feeders, gang operated air break switches etc. with provision of charcoaldust and common salt packed all around the earth plate, including necessary excavation and earth work in any typeof soil/strata and testing complete all as specified and directed and shown on electrical plate No. 5 of SSR Part I (1991). Note:- GI Wire more than 7.5 m will be measured separately.

Supply and fixing in replacement MCCB four Pole 250 Amps, 415 volt thermal release bearing adjestable type breaking cap 36 KA, comlete all as specified and as directed by Engineer-in-Charge. Make - Havells/L&T/Legrand.

Supply and fixing in replacement MCCB four Pole 125 Amps, 415 volt thermal release bearing cap 25 KA suitable for the MCB DB above comlete all as specified and as directed by Engineer-in-Charge. Make - Havells/L&T/Legrand.

S&F MCB TPN, 100 Amps, 10 KA 440 volt 50 Hz all as specified ans directed by engineer in- charge. Make: Havells/C&S/Standard

Supply & fix in replacement PVC FRLS Flexible cable copper conductor, unsheathed , 1100 volts grade confirming to IS:694/1990 of size 1.5 sqmm. Make: Finolex /Plaza/Polycab.

Supply & fix in replacement PVC FRLS Flexible cable copper conductor, unsheathed , 1100 volts grade confirming to IS:694/1990 of size 2.5 sqmm. Make: Finolex /Plaza/Polycab.

Supply & fix in replacement PVC Flexible cable copper conductor, twin core, 1100 volts grade confirming to IS:694/1990 of size 0.75/1.0 sqmm. Make: Finolex /Plaza/Polycab.

Supply & fix in replacement PVC insulated Aluminium conductor twin core service cable ISI marked of size 6 Sqmm. Make: Finolex /Plaza/Polycab.

Supply and fix straight joint heatshrinkable type of LT cable for size 25 Sq mm to 35 Sq mm 3.5 core 1100 volts complete all as specified and directed by engineer-in-charge.

All as per srl item No. 187 above but size 120 Sq mm to 185 Sq mm all as specified and directed by engineer-in-charge.

S&F in replacement of exhaust fan heavy duty 300 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make - Havells or in equivalent to Crompton/Bajaj.

S&F in replacement of ceiling fan heavy duty 1200 mm sweep including necessary fixing arrangement for proper fixing/hanging as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make - Havells or in equivalent to Crompton /Bajaj.

S&F in replacement of exhaust/ventilating fan heavy duty plastic body 250 mm sweep including necessary fixing arrangement for proper fixing in wall and making hole as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make - Model Havells or equivalent of Crompton / Bajaj

S&F in replacement of wall mounting fan heavy duty 450 mm sweep including necessary fixing arrangement for proper fixing on wall as per site requirement complete all as specified and as directed by Engineer-in-Charge. Make - Havells or equivalent of Crompton / Bajaj

Cutting of existing surface/wall for making hole suitable for fixing of exaust fan of required size including 04 Nos mild steel hold fastner and making good the disturbed surface all as specified and as directed by Engineer-in-Charge.

JAIPAL AND BROTHERS

M/S PRADEEP ENTERPRISES

CHAUHAN ENTERPRISES

shiva enterprises