Loading
Loading…
Loading…
Tender Value
₹5.1 Cr
EMD Value
₹10.3 L
Closing Date
25 Sept 2026, 3:00 pm2d left
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
TRACK
14 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or V which ever is less ; where V= Advertised value of the tender in crores of Rupees N= Number of yearsprescribed for completion of work for which bids have been invited. The average annual contractual turnovershall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating averageannual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Technical Eligibility criteria: (a)The tenderer must have successfully completed or substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value ofthe tender. (b) (i) In case of composite works (e.g. works involving more than one distinct component, suchas Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure,superstructure etc.), tenderer must have successfully completed or substantially completed anyof the following during last 07 (seven) years, ending last day of month previous to the one in which tender isinvited: Three similar works each costing not less than the amount equal to 30% of advertised value of eachcomponent of tender, or Two similar works each costing not less than the amount equal to 40% of advertisedvalue of each component of tender, or One similar work each costing not less than the amount equal to 60%of advertised value of each component of tender. Note: Separate completed works of minimum requiredvalues shall also be considered for fulfillment of technical eligibility criteria for different components. Workexperience certificate fromprivate individual shall not be considered. However, in addition to work experiencecertificates issued by any Govt. Organisation, work experience certificate issued by Public listed companyhaving average annual turnover of Rs 500 crore and above in last 3 financial years excluding the currentfinancial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered atleast5 years prior to the date of closing of tender, shall also be considered provided the work experiencecertificate has been issued by a person authorized by the Public listed company to issue such certificates. Incase tenderer submits work experience certificate issued by public listed company, the tenderer shall alsosubmit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wisedetails of payment received duly certified by Chartered Accountant, TDS certificates for all paymentsreceived and copyof final/last bill paid by company in support of above work experience certificate.Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of thepresent contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract onContractor's default has been initiated. The credential certificate in this regard should have been issued notprior to 60 days of date of invitation of present tender.
Definition of Similar Work :- Any Railway track work including track maintenance work.
18 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender value is including escalation of (-) 15% (minus Fifteen percent) on CPWD DSR 2023 ratesTenderer should note this before quoting the rates.
The original Bank Guarantee (in lieu of Bid Security) should be delivered in person to the officialnominated (i.e.OS/Tenders/Engg/NED Division) within before closing date for submission of bids.(i.e.,excluding the last date of submission of Bids).
All the instructions furnished in the Technical Compliance/ Commercial Compliance/ Custom/Undertakings/General Instructions/Undertakings are only indicative and not exhaustive. The tenderer shall read the GCC/Tender documents for complete details.
The tenderer shall thoroughly go through the entire tender documents and strictly adhere to theinstructions and directions given therein.
Nanded Division : Proposed safety related track maintenance works and other miscellaneous track works under in SSE/Pway/PAU & SSE/Pway/HNL under ADEN/PAU's jurisdiction
T-202627-3-045~SCR
T-202627-3-045
Open
Works - General
12 Months
Nanded, Maharashtra
₹0
₹10.3 L
2 Sept 2026
2 Sept 2026
11 Sept 2026
73 items across 2 schedules · ₹5,15,16,127.02 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Girth over 30 cm and up to 60 cm | Each | 392.00 | 303.04 | 1,18,791.68 |
| 2 | Girth over 60 cm and up to 1.5m | Each | 49.00 | 836.48 | 40,987.52 |
| 3 | For Casual/Scattered Rail Renewal work | RM | 1225.00 | 32.53 | 39,849.25 |
| 4 | Locations other than Ballasted Deck Bridge | Each | 980.00 | 407.84 | 3,99,683.2 |
| 5 | For 1.00m long fishplates | Joint | 1470.00 | 112.94 | 1,66,021.8 |
| 6 | For 610 mm long fish plates. | Joint | 490.00 | 79.49 | 38,950.1 |
| 7 | Opening and refixing of Joggled fish plates provided to weld joints/rail of any rail section under traffic to enable examination of weld/rail by departmental official nominated by Engineer In charge and lubrication of fishplates by applying departmental Grease graphite grade 'O' (IS:408) to fishing planes and bolts by departmental black oil as per procedure laid down in latest version of IRPWM, including all tools required and as directed by Engineer-in-charge. Note: 1. Grease Graphite, black oil, fish bolts, K.Oil, wire brush, required for work shall be given by department and issued at concerned SSE/PW Stores. 2.Jammed fish bolts shall be cut using chisel and hammer and replaced with new bolt. | Set | 2450.00 | 45.12 | 1,10,544 |
| 8 | Lubrication of Elastic Rail Clips on PSC sleepers as per procedure prescribed in latest edition of IRPWM with Railway's grease. | ERC | 489831.00 | 1.95 | 9,55,170.45 |
| 9 | Removing seized ERC from SGCI inserts of existing track by using suitable approved chemicals and re-fixing after greasing of insert eye and ERC with Contractor's grease of specified quality as per provisions of IRPWM, as directed by Engineer in-charge. Note: 1.List of Seized ERC along with location shall be prepared after inspection of SSE/P.Way and marked prior to execution of this item. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if SGCI insert is broken or sleeper gets cracked in the process. | ERC | 4899.00 | 44.66 | 2,18,789.34 |
| 10 | By using Railway's Grease graphite | Each | 29390.00 | 26.99 | 7,93,236.1 |
| 11 | Sleepers up to 2.85 m length | Each | 490.00 | 524.03 | 2,56,774.7 |
| 12 | Sleepers of length more than 2.85 m and up to 4.20 m | Each | 368.00 | 721.59 | 2,65,545.12 |
| 13 | Sleepers of more than 4.20 m length | Each | 172.00 | 1,136.71 | 1,95,514.12 |
| 14 | 1 in 8½ Turnout | Set | 49.00 | 3,306.98 | 1,62,042.02 |
| 15 | 1 in 12 Turnout | Set | 98.00 | 3,618.15 | 3,54,578.7 |
| 16 | 1 in 8½ Switch Assembly | Set | 49.00 | 11,659.06 | 5,71,293.94 |
| 17 | 1 in 12 Switch Assembly | Set | 74.00 | 12,977.73 | 9,60,352.02 |
| 18 | 1 in 8.5 Turnouts | Set | 98.00 | 2,556.3 | 2,50,517.4 |
| 19 | 1 in 12 Turnout | Set | 133.00 | 4,119.29 | 5,47,865.57 |
| 20 | For 1 in 12 Turnouts | Set | 133.00 | 6,457.78 | 8,58,884.74 |
| 21 | For 1 in 8.5 Turnouts | Set | 98.00 | 5,166.22 | 5,06,289.56 |
| 22 | For 1 in 12 Turnouts (Sleeper No 1 to 25 and 5 approach sleepers) | Set | 133.00 | 1,543.31 | 2,05,260.23 |
| 23 | For 1 in 8.5 Turnouts & Derailing switches (Sleeper No 1 to 22 and 5 approach sleepers) | Set | 98.00 | 1,234.65 | 1,20,995.7 |
| 24 | For 1 in 12 Turnouts (Sleeper No 65 to 73 ) | Set | 133.00 | 1,148.17 | 1,52,706.61 |
| 25 | For 1 in 8.5 Turnouts (Sleeper No 43 to 48) | Set | 98.00 | 918.54 | 90,016.92 |
| 26 | Renewal of corroded slide chairs duly removing the old slide chairs by heating using contractors gas and equipments or by any approved methods and inserting Railways new slide chairs and plate screws including crossing of tracks, leading all required materials to site, stacking all released materials, with all contractor's tools, consumables, labour, lead, lift and incidental charges etc complete as directed by the Engineer in charge. Note: 1. All the fittings will be supplied at nearest SSE/Stores. 2. In case of damage of PSC sleeper, penalty at the rate of 25% of the current cost of sleeper shall be levied. | Each | 392.00 | 302.15 | 1,18,442.8 |
| 27 | Turnout sleepers of length up to 2.85 m | Each | 1470.00 | 118.86 | 1,74,724.2 |
| 28 | Sleepers of length more than 2.85 m and up to 4.20 m | Each | 1225.00 | 142.63 | 1,74,721.75 |
| 29 | Sleepers of length more than 4.20 m | Each | 980.00 | 154.52 | 1,51,429.6 |
| 30 | Boxing and profiling of ballast as per procedure prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by Engineer-In charge. | TRM | 323289.00 | 22.66 | 73,25,728.74 |
| 31 | Under Traffic Block Conditions: | cum | 40000.00 | 45.35 | 18,14,000 |
| 32 | 25mm gap 'in-situ' welding during traffic block using Railway's welding portion & Welder and finishing of weld to meet the prescribed tolerances and pass all stipulated tests with all required labour, materials, consumables, tools, equipments etc. to complete the work in all respect as per IR's "Manual for Fusion Welding of Rails by Alumino - Thermic Process" with latest correction slips, including marking of welded joint, painting weld collar with anticorrosive paint, restoration of track near weld joint to original position and fixing of joggled fish plate at new weld, to be removed after passing of weld in USFD test as directed by Engineer in charge. Note: 1. Only welding portion and related accessories as per Annexure - I and Welder shall be supplied by Railways. 2. Hydraulic Weld trimmer shall be used for chipping and profile Grinder for finishing. 3. Required nos. of Joggled fish plates shall be supplied by Railway at nearest P. Way Stores and the same shall be returned at nearest P. Way Store or at other location as per direction of Engineer-in- Charge after release from track. | Each | 980.00 | 1,443.86 | 14,14,982.8 |
| 33 | For PSC Sleeper | TRM | 19104.00 | 77.12 | 14,73,300.48 |
| 34 | Packing of isolated loose PSC sleepers on plain track below the bottom of the sleepers and surrounding through out its length duly opening two galas on either side of the renewed sleepers and packing the sleeper to bring the track to normal speed including gauging, aligning, squaring of sleepers and sectioning of ballast to the required profile with all contractor's labour, tools and plant etc. including all lead and lift and crossing of tracks where ever necessary complete and as directed by the Engineer-in-charge. | Sleeper | 19594.00 | 69.89 | 13,69,424.66 |
| 35 | For PSC sleeper Track with Sleeper Density of 1540 sleepers/Km or more | TRM | 7348.00 | 153.29 | 11,26,374.92 |
| 36 | With Clamps | Set | 490.00 | 135.75 | 66,517.5 |
| 37 | Replacing existing glued joint rail with cut rails or with glued joint rail or insertion of glued joint by cutting existing track under traffic condition by cutting rails, refixing with all rail sleeper fastenings and providing required gaps for carrying out welding as an alternative to drilling holes or joining rails with fish plates duly drilling holes as required including stacking of released material and as directed by engineer in-charge. Note: (1) Drilling holes & rail cutting will be paid separately. (2) Transportation of materials to the site of work from supply points, if more than 250m, shall be paid separately. | Each | 368.00 | 1,567.39 | 5,76,799.52 |
| 38 | With Contractor's hard wood block. | Each | 294.00 | 2,239.07 | 6,58,286.58 |
| 39 | Cleaning of side drains along the track including disposing of muck beyond Railway boundary as per instructions of Engineer in- charge to keep drains clean and clear in cuttings etc. | RM | 19594.00 | 27.86 | 5,45,888.84 |
| 40 | Removing weeds & bushes in ballast section and cess up to 3.95m from centre line of track in mid section & station yard, as specified by Engineer in-charge including disposal of branches, bushes outside cess/yard. | TRM | 215526.00 | 12.82 | 27,63,043.32 |
| 41 | Kilometre & Gradient post | Each | 245.00 | 85.27 | 20,891.15 |
| 42 | Level Crossing Post | Each | 196.00 | 169.17 | 33,157.32 |
| 43 | Curve Post | Each | 196.00 | 90.22 | 17,683.12 |
| 44 | Bridge Board | Each | 30.00 | 150.25 | 4,507.5 |
| 45 | Bridge Tablet | Each | 637.00 | 42.99 | 27,384.63 |
| 46 | Miscellaneous General Boards, Jurisdiction Boards, Structures etc. | Sqm | 480.00 | 116.55 | 55,944 |
| 47 | For day time block working | TRM | 215526.00 | 16.42 | 35,38,936.92 |
| 48 | For night time block working | TRM | 117560.00 | 18.4 | 21,63,104 |
| 49 | Removing and refixing of guard Rails over slab bridges during machine packing with all contractor's men and materials duly removing fittings, leading guard rails to bridge approaches, lifting, dragging, positioning and crossing of track etc, and as directed by Engineer In charge. | TRM | 1960.00 | 91.01 | 1,78,379.6 |
| 50 | 1 in 8½ Turnouts (Under Traffic Block Conditions) | Set | 95.00 | 8,057.73 | 7,65,484.35 |
| 51 | 1 in 12 Turnouts (Under Traffic Block Conditions) | Set | 133.00 | 9,376.4 | 12,47,061.2 |
| 52 | BCM/FRM/UNIMAT (7.5 KVA generator and 12x500 W) | Night | 588.00 | 3,524.13 | 20,72,188.44 |
| 53 | 60 Kg - 110/90 UTS - On Running Line | Each | 980.00 | 270.31 | 2,64,903.8 |
| 54 | 52 Kg - 90 UTS- On Running Line | Each | 392.00 | 219.15 | 85,906.8 |
| 55 | Outside Track | Each | 1960.00 | 50.55 | 99,078 |
| 56 | Sleeper Spacing, Re-spacing / Squaring of sleeper by Hydraulic Sleeper Spacer with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in-charge. Hydraulic Sleeper Spacer shall be as per RDSO's Specification No. TM/SM/17, dated 31.03.1992. | Each | 12246.00 | 61.17 | 7,49,087.82 |
| 57 | Level crossings with asphalted road surface | Sqm | 1470.00 | 491.79 | 7,22,931.3 |
| 58 | Level crossings with any other type of road surface | Sqm | 1470.00 | 402.22 | 5,91,263.4 |
| 59 | Fixing check rails to running rails on level crossings with MS brackets, MS packing plates, bolts & nuts, spring washers etc. including lubrication as per approved drawing & specifications, as directed. Rails, MS brackets, packing plates, bolts & nuts, spring washers will be supplied by Railways. Note: One set consists two check Rails. | Set | 40.00 | 4,341.61 | 1,73,664.4 |
| 60 | Clearing waterway of major & minor bridges by removing weeds / shrubs / bushes, removing silt deposit, filling scours, if any up to 10 metre from centre of bridge on either side including disposing waste and silt away from waterway. Note: Rate is for a single line and per metre of bridge span. | Metre | 9797.00 | 184.57 | 18,08,232.29 |
| 61 | For erection | Each | 980.00 | 220.96 | 2,16,540.8 |
| 62 | For removal | Each | 980.00 | 179.15 | 1,75,567 |
| 63 | For Fixing / Re-erecting | Each | 490.00 | 199.8 | 97,902 |
| 64 | Fixing vertically the unserviceable PSC sleepers at locations of tress-passing, railway boundary or to make temporary store by excavating trench, fixing PSC sleeper in trench and filling back open trench. | Each | 2450.00 | 129.83 | 3,18,083.5 |
| 65 | Providing and fixing Trolley Refuge of size 3.0m x3.0m on cess, placing with released unserviceable PSC sleepers and keeping them at all four sides of refuge and also placing as matting inside the refuge by keeping them in upside down position with a minimum of 14 sleepers including levelling with earth, excavation, all lead and lift, crossing of tracks, leading the sleepers with in a free lead and lift, handling etc., with all contractor's men material complete and as directed by the Engineer-in-charge. Note: Earth-work will to be paid separately under relevant item. | Each | 100.00 | 3,471.5 | 3,47,150 |
| 66 | Supplying and spraying in specified proportion Weedicide Chemical, capable to kill entire weed on track / cess / embankment with all labour, material, tools & plants etc. complete job in all respect. Scientific name of the chemical is Isopropylamine Salt of Glyphosate, in which active ingredient is Glyphosate (41%), colour is light amber to brownish, very low in toxicity and has favourable environmental characteristics. It will be ensured that no weed growth occurs up to six months period, otherwise re- spraying shall be done by the contractor free of cost. | Sqm | 734746.00 | 0.58 | 4,26,152.68 |
| 67 | JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity | Hour | 4300.00 | 870.14 | 37,41,602 |
| 68 | Hydra or similar tyre mounted Pick-n-Carry crane of 12T capacity for misc. works of handling of material | Hour | 2450.00 | 836.21 | 20,48,714.5 |
| 69 | Tractor with Trolley for local transportation or other misc. works. | Hour | 2450.00 | 200.69 | 4,91,690.5 |
| 70 | Manufacture and supply of Precast Kilometer Posts of size 1.15 x 0.50 x 0.075 m in RCC 1:2:4 mix, engraving letters and leading to work spot, fixing in position with CC 1:3:6 concrete duly making pits of size as required, painting the post, writing the letters on both sides of the post with 2 coats of enamel paint of approved quality to the Railways drawings/IRPWM with contractor's materials, cement, steel, labour, tools, plant, with all lead and lifts etc., complete as per specifications and as directed by the Engineer-in-charge. Note: Excavation, Concrete and steel work will be paid under relevant items. | Each | 150.00 | 375.65 | 56,347.5 |
| Schedule total | ₹5,06,73,867.02 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderBookletNEDNEW1.pdf
ATTACHMENT
TenderBookletNEDNEW2.pdf
ATTACHMENT
ACS1to6.pdf
ATTACHMENT
AdvanceCorrectioSlip7-10forGCC.pdf
ATTACHMENT
ACS11.pdf
ATTACHMENT
PVC condition
ATTACHMENT
InstructiontoMSE.pdf
ATTACHMENT
RevisedApprovedBrandlist-SCR.pdf
ATTACHMENT
ADENPAUSafetyQty.pdf
ATTACHMENT
PVC-forthevalueoftheworkdoneincludingvariationinquantities._1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .