REPAIRS TO PVC CHAIN LINK FENCING, GATE, SEWAGE LINE, GULLY TRAP, GREASE TRAP AND OTHER MISC WORK OF AGE B/R (W) UNDER GE (W) COLABA, MUMBAI

Amount

S&F in repairs in oil grease trap, 2 mm thick size 0.80 x0.5x1 metre size complete install in pit with concreate base or as per site requirement Includes all fitting and activities to execute and make draniage line functional all as specified & direction as per Engr-in- charge .

S&F in repairs PVC coated chain link fencing of size 100x100mm wire gauge 4mm including line wires, rail straining bolts etc. all as specified and directed.

Dismantling posts or struts embedded in ground (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground all as specified and directed.

S&F MS angle iron post & strut etc. in fencing including embedding in concrete and screwing etc. including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 GdeE-165 completed all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as directed.

M&L for cement concrete type C2 1:3:6 (40 mm graded aggregate) in foundations, filling and mass concrete or for fixing of RCC/ angle post complette all as specified and directed

S&F MS bolts machine made with hexagonal or square head one end and screwed the other or screwed both ends n.exc 5 cm long 12mm dia all as specified and direceted.

S&F in repair galvanised, 2 strand, steel, barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. all as specified and directed. Note:- each line wire to be measured as one length.

M&L for taking down MS rolling shutters to carryout minor repairs, greasing and errecting the same in the same place complete all as specified and directed. Note:- Ball bearing, Spring, MS laths, gear, safety locks etc. if required shall be measured and paid separately.

S&F in repairs only Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.

S&F in repairs only ball bearing for rolling shutters all as specified and directed.

S&F in repairs only mild steel 1.25mm thick laths for rolling shutters all as specified and directed.

S&F in repairs steel rolling shutters, 1.25mm laths thickness, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, push-pull or manual type all as specified and directed.

All as per item no. 13 above but gear operated type with bevel gear box and crank handle all as specified and directed.

S&F in repairs collapsible steel gate, top hung consisting of channel, pickets, picoted flat bars, top and bottom runners, erection in position and securing runners with hold fast and brackets all as specified and directed.

M&L for framed work as in doors or gates of angle or other section of grade FE 410-0 (Gde E 250) with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing all as specified and directed.

S&F in repairs mild steel, plain, black sheet 1.25mm thick in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles etc. complete all as specified and directed.

S&F in repair concertina coil fencing with punched tape concertina coil 450 mm dia up to 3.0 m height of wall with existing angle iron 'Y' shaped placed 2.4 mm or 3.0 m apart stud tired with G.I barbed wire tied to angle made from High Tensile Spring Steel - High Carbon Wire conforming to IS 4454/ Part -1 /Grade –SM duly Hot dipped galvanized with diameter starting from 2.50 mm , UTS 1670 N/sqmm, Heavy zinc coating with minimum 230 gms per sqm all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid, bedded and pointed in any mortar and removal of rubbish off the site all as specified and directed.

M&L rubber moulded glossy finished 60 mm thickness precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of, M-35 Grade with grey cement and pigment laid over sand cushning including compaction of paver blocks using surface vibrator including 25 mm thick compacted bed of crushed stone sand, filling the joints with fine sand etc. all as specified and directed.

M&L rubber moulded glossy finished 60 mm thickness precast grass concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of, M-35 Grade with grey cement and pigment laid over and including crushed stone sand 30 mm thick compacted and filling the joints with fine sand including compaction of paver blocks using surface vibrator including including providing grass on surface all as specified and directed.

M&L for glazed / matt finish chequred cement concrete coloured tiles of size area exc 0.09 sqm but not exc 0.36 Sqm and 25 mm thick, set, jointed and pointed in neat cement slurry (with gray cement and pigment) after and including 20 mm thick in cement plaster in CM (1:6) for fixing tiles complete all as specified and directed. Make -Somany/Rak/Kajaria or equivalent

M&L for any coloured vitrified heavy duty outdoor anti, skid full, bull -nose finish, self embossed grooves body tiles 10 mm thick (square/rectangular, 600mm x 600mm) polished area of each tile exc 0.09 Sqm and not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 20 mm thick bedding layer in CM (1:4) for fixing tiles all as specified and directed. Make - Somany/Rak/Kajaria(Grandstone Crema series) or equivalent

M&L for any contrat coloured digital matt finished EPDM rubber flooring tiles 20-25 mm thick (Square 500mm x 500 mm) of each tile exc 0.09 Sqm and not exc 0.36 sqm, set and jointed field apply adhesive material SR2 to match the shade of tiles and fixing tiles anywhere on floor all as specified and directed.

M&L for any coloured digital ultra strong / heavy duty outdoor anti skid vitrified tiles 15-18 mm thick (Square / Rectangular, 600mm x 600 mm) polished, area of each tile exc 0.09 Sqm and not exc 0.36 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles laid over and including 20 mm thick in CM (1:4) all as specified and directed. Make -Somany/Rak/Kajaria(Geostone series) or equivalent

M&L 20mm thick Granite (of any type) machine cut laid over floor cement screed bed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing and including rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) all as specified and directed.

M&L 20mm thick Granite (of any type) machine cut, in wall lining, steps, jambs, pillars, window cills, skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing and including rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) all as specified and direceted.

Dismanteling and refixing after preparation of sub base, 25mm thick coloured chequred cement concrete tiles with gray cement and coloured pigment of size 300mm x 300mm/200x200mm set, jointed and pointed with neat cement slurry as in floor including 20mm thick cement mortar screed bed in CM 1:4 all as specified and directed.

Dismanteling and refixing after preparation of sub base, 60mm/80 mm thick coloured interlocking tiles with grey cement and coloured pigment set, jointed and pointed with neat cement slurry with as in floor including 20mm thick cement mortar screed bed in CM 1:4 all as specified and directed.

Dismanteling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, windows, balcony in ground floor, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to FE 290 Gde -E-165 all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to FE 290 Gde -E-165 all as specified and directed.

S&F in repair for steel work in tubular trusses including special shaped washer using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 all as specified and directed.

S&F of mild steel 2mm thick, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, as required complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of epoxy paint over two coat of epoxy primer all as specified and directed. Make : Asian paints PPG / Berger protective coating or equivalent

M&L for providing and fixing stainless, steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts, etc., of required size on the top of floor or the side of waist slab with suitable arrangement all as specified and directed.

Demolition of cement concrete in ground floor and paving not exc. 15cm thick (below or above ground level) and removed from site of work all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition of any description and in any position not otherwise specifically provided for including removing debrise from MoD land all as specified and directed.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided including removing debris outside MoD land all as specified and directed.

M&L 75mm thick PCC 1:3:6, type C2 (using 40mm graded crushed stone aggregate) as in plinth protection and all other similar works, finishing the cement concrete top surfaces even and smooth without using extra cement all as specified and directed.

M&L for forming construction joint 30mm deep X 10mm wide with sealing compound grade A all as specified and directed.

M&L for READY MIXED CEMENT CONCRETE DELIVERED ON BUNKER M-20 grade, (using 20 mm graded crushed stone aggregate) as in flooring and all other similar works all as specified and directed.

M&L hard core of broken stone or boulders of gauge not exc 63mm, deposited, spread & levelled in layers not exc 15cm thick, including watering and ramming to a true surface all as specified and directed. Note:- Volume of hard core after consolidation will be measured and paid.

M&L 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in flooring and all other similar works all as specified and directed.

M&L for providing precast cement concrete 1:2:4, type B1 (using 20 mm graded crushed stone aggregate), set in cement mortar 1:4 in road side kerb stones of size 450 x 300 x 150 mm or similiar with longer facing edges tapered on top and all other similar works all as specified and directed.

M&L for preperation of old / new pre-cast concrete kerb stone surfaces or similiar concrete surfaces and applying two coats of industrial epoxy paint over a coat of primer of any colours and pattern all as specified and directed .

M&L for two coats of epoxy concrete floor coating on surface (consists of hardner and resin ) over one coat of primer for creating a bonding between epoxy and concrete surface, before applying, prepare the surface from any undulation (using wire brush or electric floor scrubber, Etching) and removing all oil and grease stain if any, and brooming the surface clean to remove any settled dust particle, filling the cracks with suitable epoxy grout material and then applying the coating with the help of a roller all as specified and directed.

M&L in repairs precast cement concrete (1:3:6) type C-1, block masonry with solid blocks of size 390x300x200 mm size, exc 10 cm in width and setting in cement mortar 1:4 all as specified & directed

All as per item No 48 above but except blocks. (Serviceable blocks obtained from Item above to be reused.)

S&F in repairs 2-3 mm thick fibre reinforced glass (FRP) plain / floral pattern sheeting fixed with coach screws and washer in mild steel frame as view cutter or others all as specified and directed.

S&F in repairs to 9 feet pulley operated colth drying system, aluminium anodised 20mm dia pipes, channel assembly, locking system to hide rope knot, ropes 4mm dia HDPE double core & fitting material all as specified and directed. Make :- Easy dry or other equivalent make as approved by GE.

M&L ready mix plaster for internal / external wall rendering 15 mm thick in two coats of 10 mm base coat and 5 mm finishing coat on brick wall or concrete surfaces including taking down off old cement plaster and cement mortar and making groove of appropriate size and finishing sand faced finished using sponge, using 200 gm per 40 kg bag water proofing compound including use of scaffolding and removing debris outside MoD land all as specified and as directed. Name of Manufacturer: M/s Premier Floor to Roof Materials pvt. ltd/ M/s Walplast Products pvt. ltd/ M/s Ultratech Cement Ltd/M/s Sound buildcare pvt. Ltd/ or other approved equivalent make.

Supply only intergral water proofing compound powder confirming to IS- 2045 all as specified and directed.

M&L in repairs for providing precast cement concrete (1:2:4) type BO (using 12.5 mm graded crushed stone aggregate) as in jallies, 40 mm thickness (measured solid) including all mouldings and frame set in cement mortar (1:4) all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete and like all as specified and direcetd.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in coping , bed concrete and all other similar works including necessary formwork all as specified and directed.

M&L RCC 1:2:4 type B-1 (Nominal mix) (using 20mm graded crushed stone aggregate) as in precast cover slab perforated fixed in position , tie between two brick walls and all other similar works set in CM 1:4 including necessary form work all as specified and directed.

M&L for Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to IS all as specified and directed.

S&F in repairs cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, ralling, frames, manhole covers, fire and shoot doors, balusters and similar articals exc 5 kg each by weight all as specified and directed.

S&F MS plate (Chequered) 5mm and over as in manhole cover fixed to angle iron frame with three Nos of hinges and 150 mm handle all as specified and directed.

Cleaning of open drains completely removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land for width of drains exc. 30 cm but n.exc. 60 cm all as specified and directed, .

Cleaning of open drains completely by removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land for width of drains exc. 60 cm but n.exc. 75 cm all as specified and directed,

Cleaning of drains/culverts including removing & re-covering of RCC/CI/Steel covers by completely removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land for width of drains n. exc. 30 cm all as specified and directed.

Cleaning of drains/culverts including removing & re-covering of RCC/CI/Steel covers by completely removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land for width of drains exc. 30 cm but n.exc. 60 cm all as specified and directed.

Cleaning of drains/culverts including removing & re-covering of RCC/CI/Steel covers by completely removing silt, soil, mud sludge, vegetation growth etc. and removing the same to out side MoD land for width of drains exc. 60 cm but n.exc. 75 cm all as specified and directed.

Taking down rain water pipes/PVC pipes/cemented pipe (any size or pattern) including all fittings, heads, shoes, bends, swan necks, etc.at any height, any location, any floor including all necessary scaffolding complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) pipes, type B, single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls to pipe difference 100 mm including stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays including all steel scaffloding arrangments all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes, type B, single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls to pipe difference 100 mm including stack clamps out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays including all steel scaffloding arrangments complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height including necessary scaffolding all as specified and as directed.

S&F 75mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location/height including necessary scaffolding all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick all as specified & as directed.

M&L RCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, and all other similar works all as specified & directed.

M&L for PCC (1:3:6) type C1 (using 40 mm graded crushed stone aggregate) as in surface channels and drains, finished surfaces even and smooth all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forming moulds, mitered/stopped ends all as specified & as directed.

M&L for preparing new surfaces of walls/ceilings by and applying two coats of weather proof acrylic exterior paint (100% Acrylic Asian Apex Ultima Protek Duralife or equivalent) over a coat of primer (Ultima Protek Duralife Basecoat) or equivalent) and scaffolding where ever required at any height for external painting all as specifed and directed

M&L for preparing old surfaces of walls/ceilings by scrapping/rubbing and applying two coat of weather proof acrylic exterior paint (100% Acrylic Asian Apex Ultima Protek Duralife or equivalent) including necessary scafolding of any height for external painting all as specifed and directed.

Removing and refixing of MS / Steel drain cover with steel frame after peaparation of base/edegs of menhole/drain all as specified & directed.

S&F in repairs of fancy design SS garde 304 street LED bollard having minimum weight of 11.30 Kg, diameter of 100mm length of 1.00m at top and bottom diameter of 180mm using 100 mm polycarbonate glass milky white with 12 watts LED module light of philips/fulham driver having adequates number of connectors and one power supply kit as per manufacture requirement and provide both side hook for fixing chain link necessary provision for fixing on road all as specified and as directed. Note- Item rate quoted shall be deemed to be inclusive of taking connection to main electric supply from near by electric sources.

S&F in repairs of cross section dia of 10mm stainless steel 316 grade medium link chain between bollards, having outside width of 38mm, inside length (pitch) 41mm, well polished all as specified and directed.

S&F in repairs for LED curb stone of size 500x150x200 mm made out of 5 foundation rods ensuring complete protection against theft and having a LED strip of lenght 470 mm with 22 nos LED which is plastic coated and having adequate number of connectors and one power supply kit as per manufacture requirement all as specified and as directed. Note- Item rate quoted includes connection to main electric supply from near by electric sources. Make Hydrose LED Curb stone or equivalent as approved by GE

M&L for removing plants including roots by dismantling of brickwork/PCC including necessary scaffolding of any type and in any position or location i.e roof, parapet walls near pipes etc and applying acid after removing roots for preventing the re-growth & making good of disturbed portion using PCC 1:2:4 type B0 & 10mm thick cement plaster in CM(1:3), for size of disturbed portion not execeeding 150mm X150mm X 200mm all as specified and directed.

S&F in repairs reinforced concrete pipes, class NP2, 200 mm dia laid and jointed with collars all as specifed and directed.

S&F in repairs reinforced concrete pipes, class NP2, 100 mm dia laid and jointed with collers all as specifed and directed.

S&F for providing, lowering and laying HDPE DWCPE (SN-8) pipes as per IS : 16098 of 2013, 150 mm ID, laid and jointed with and including elastomeric sealing 'O' rings as per manufacturer's instructions including dismantling complete all as per specified and directed. Note - The rate quoted includes for laying pipes level or to falls in trenches, etc. on concrete bed or directly on hard ground as indicated and making joints and testing as specified.The rate quoted also includes for all necessary extra joints, waste, and cutting, etc.)

S&F for providing, lowering and laying HDPE DWCPE (SN-8) pipes as per IS : 16098 of 2013, 200 mm ID, laid and jointed with and including elastomeric sealing 'O' ring as per manufacturer's instructions including dismantling complete all as per specified and directed. Note - The rates includes for laying pipes level or to falls in trenches, etc. on concrete bed or directly on hard ground as indicated and making joints and testing as specified. The rates include for all necessary extra joints, waste, and cutting etc.)

M&L PCC 1:3:6 type C-2, (using 40 mm graded crushed stone aggregate) for concrete bed to drain pipes including packing under and hauching & benching against the sides of pipes after they are laid and tested for dia of pipe 150 mm all as specified and directed. Note :- (i) Thickness of bed below the barrel of pipes: 15cm for pipes 200mm dia and over. (ii) Width of bed: Outer diameter of drain pipes (not of sockets/collars) plus 30 cm (iii) The rates include for any necessary shuttering and supports to concrete and for laying beds to falls.

M&L PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) for concrete bed to drain pipes including packing under and hauching & benching against the sides of pipes after they are laid and tested for dia of pipe 150 mm all as specified and directed. Note :- (i) Thickness of bed below the barrel of pipes: 15cm for pipes 200mm dia and over. (ii) Width of bed: Outer diameter of drain pipes (not of sockets/collars) plus 30 cm (iii) The rates include for any necessary shuttering and supports to concrete and for laying beds to falls.

M&L PCC 1:2:4 type B1 ( using 20 mm graded crushed stone aggregate) as in copings & in drains etc including necessary formwork & moulds all as specified and directed

S&F in repair 900mm x 600mm FRP manhole cover of 12.50 ton loading capacity with frame over manhole coping concrete all as specified and directed. Make : Everlast or equivalent

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1, smooth finished, and reforming benching as required, internal dia of pipe 150mm all as specified and directed.

S&F RCC M-30 Grade approved Design Precast concrete post of size 150mm x 150mm x 2100 mm height , having two grooves of size 55 x 28 mm so as to receive 7 Nos of panels having size of 1500 mm x 300 mm x 50 mm thickness (1 Panel at bottom + 4 Design Panel bottom to top +1 Jafari type panel at top as approved by Engr-in Charge/GE). The post shall be reinforced with 4 Nos of 8 mm dia bars with 4 mm dia stirrups @ 150 mm C/C, panels shall be reinforced with 4 Nos of longitudinal bars of 6mm dia plain steel & 6mm plain MS stirrups @ 150 C/C all welded. The post shall be fixed to the ground by digging a hole of 300mm x 300mm x 600 mm and filled with PCC 1:3:6 after the post should be aligned in these holes, including removal of excavated earthwork outside MoD land. The post will be erected @1.615m C/C. Height of the pillar shall be 2700mm (600mm below the ground and 2100 mm above the GL) with any approved design by Engr-In-Charge all as specified & directed .

David Construction Co.

SRI SAIRAM COUNSTRUCTION

Angrahit Services Trading Co

Unitech Enterprises

Nilesh Construction

SHREE JAGDISH FURNITURE CO.

Bidder Name

Unitech Enterprises

Frends Enterprises

Nilesh Construction

SRI SAIRAM COUNSTRUCTION

David Construction Co.

SHREE JAGDISH FURNITURE CO.

Angrahit Services Trading Co