Construction of 10 Nos of new MS Prefab Hut Structures at Aranyak Campsite, Collem.

Amount

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 80X80X3.2mm Rectangular hollow tube Weight @7.51kg/meter 50X25X2mm Rectangular hollow tube in walls Walls Horizontal sides Walls Vertical Front and Back Walls Horizontal Front and Back Balcony Harizontal Support Vertical Poles Balcony Roofing Vertical support Weight as per @2.15kg/meter 40 x 40 x 2.6mm square hollow tube Balcony Roofing Vertical support Weight as per @2.92kg/meter

Providing and fixing Colouron Plus galvulium roofing Sheets of 0.5mm thick double ribbed trapezoidal profile coated 1080mm with cover width of 1020mm including all the accessories (JSW or equivalent make) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge. (Double Insulated)

Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge.

M.F. wall linging which includes 9.5/12.5 mm thick Gypsum board (conforming to IS : 2095 –1982) screw fixed to the ceiling section (0.55mm thick having a knurled web of 51.5 mm (double side wall ) Deduction Door Deduction W1 Deduction W2

Providing and Fixing WPC wall panelling of approved design and colour

Single Colour Foam Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wood styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) . The core of shutter will be filled as specified (Expanded Polystyrene Foam / Polyurethane Foam (EPS/PU) Foam). The shutter to be of single colour & water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factory. Accessories:i) S.S. Hinges 4" - 3 Nos ii) S.S. Latch - 1 No iii) Tower Bolt 5” - 2 Nos iv) Handle 5” - 2 Nos Shutter Thickness : b) 35mm

Providing & fixing Single or multi shutter turn windows Yashashri make or equivalent, made out of upvc multi- cavity frames Sections of 60mm x 60mm x 2.5mm reinforced with G.I channel and double multi-shutters Division are made by using shash mullion having 50mm x 64mm x 2.5mm multi- cavity upvc section, reinforced with G.I. channel and shutters are made out of 50mm x 64mm x 2.5mm upvc section, Reinforced and welded in corners with EPDM Gaskets and using suitable glass bead with perfect hardware like hinges, handles, stays & 4mm clear Glass. Some portion of windows can be made fixed glass. The average weight of Turn window is 11.5 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods.

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete. Plinth

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Deduction Door Deduction W1 Deduction W2

Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus for foundation

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. Floor

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : a All works upto plinth level Floor Surface

Laterite masonry in neatly dressed stones of sizeas specified in cement mortar 1: 5 (1 cement : 5coarse sand) in foundation and basement

20mm cement plaster 1: 3 (1 cement : 3 fine sand) platform top

Providing and and laying scratch resistant floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete 600 x 600 mm light Shades

Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria )conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete. C) Wall Ceramic Glazed Tiles : 300 x 600

Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required. a Flat back wash basin size 630 x 450mm with a p Flat back wash basin size 550 x 400mm with a single 15 mm C.P. brass pillar taps.

Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid, C.P. brass hinges and rubber buffers 10 lts. High level P.V.C.. flushing cistern (of approved make ) with fittings, rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls ad floors where required. a W.C. pan with white plastic seat and lid.

Providing and fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) and wall hook of approved quality confirming to IS standards.

Providing and fixing NICKEL chrome plated copper alloy Fancy Two Way Bib Cock with single knob and wall flange conforming to IS 8931:1993 15mm nominal bore.

Fancy wall mixer with 3 IN 1 SYSTEM WITH 115MM long bend pipe for connection to over head shower Jaguar make or equivalent.

Fancy wall mixer NON TELEPHONIC SHOWER SYSTEM Jaguar make or equivalent.

Single Towel Rail - Jaquar make 300mm long

Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw

Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door :

Providing & fixing bevelled edge mirror of superior glass (5mm thk) of approved Quality, shape & size complete with CP brass screws and washers, Cleats, CP studs etc Complete.

Beds for the cottage King size

Cupboard

Study Table

Plastic Chairs

Bed side table

matress king Size

Electrical Fittings

Philips Wall Light Fittings with 9 watt LED bulb Indoor (4 Nos) Philips Wall Light Fittings with 9 watt LED bulb outdoor (2 Nos) Swich board (2 Nos) Ceiling Fan (1 Nos) Exaust Fan (1 Nos)

SAGLANI FURNITURE (BID ID -48342)