PERIODICAL SERVICES TO OTM AND Md ACCN,CLEANING OF SEWAGE LINES AT CQA(A) KIRKEE AND REPAIRS TO PERIMETER FENCING OF TRANSFORMER AT PTL AT CQA(A) KIRKEE UNDER GE(I) (P) Fy KIRKEE

Amount

Material & Labour for preparation of old previously treated steel surfaces not otherwise described for over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Material & Labour for preparation of old previously treated wooden surfaces not otherwise described for over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Material & Labour for preparation of old plastered/treated surfaces of ceiling and applying one coat of white wash all as specified and directed.

Material & Labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash all as specified and directed.

Material & Labour for preparation of old plastered/treated surfaces of walls and applying one coat of white wash all as specified and directed.

Material & Labour for preparation of old plastered/treated surfaces of walls and applying one coat of cement paint all as specified and directed.

Material & Labour for preparation of old plastered/treated surfaces of ceilings and applying one coat of cement paint all as specified and directed.

Material & Labour for preparation of old plastered/treated surfaces of walls and applying one coat of oil bound distemper od approved tint all as specified and directed.

Material & Labour for complete removal of existing treatment from surfaces of walls and applying two coat of oil bound distemper of approved tint over a coat of primer including preparation of surfaces all as specified and directed.

Material & Labour for complete removal of existing treatment from interior surfaces of walls and applying two coats of emulsion paint (Tractor Emulsion Suprema or equivalent in approved make listed in p.s.) of approved tint over a coat of primer (applied as per manufacturers instructions) including preparation of surfaces all as specified and directed.

Material & Labour for complete removal of existing treatment from surfaces of walls and applying two coats of exterior emulsion paint(Apex Paint Suprema anti fungal) over a coat of primer (applied as per manufacturers instructions) including preparation of surfaces all as specified and directed.

Taking down cement plaster of any description including raking out joints hacking for key, scrubbing down with water etc from walls/ceilings all as directed.

Material & Labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work/concrete surfaces of walls mixed with integral water proofing compound ISI marked (WPC) (added as per manufacturers instructions) all as specified and directed. NOTE Supply only WPC shall be measured and paid separately.

Material & Labour for 10 mm thick rendering in cement mortar (1:6) on brick/stone masonry even and smooth without using extra cement all as specified and directed.

Supply only integral water proofing compound (ISI marked).

Material & Labour for rendering 5 mm thick in cement mortar (1:3) as in ceiling finished to an even and smooth finish using sagol all as specified and directed

Material & Labour for preparation of new plastered surfaces of walls and applying two coats of cement paint all as specified and directed

Material & Labour for preparation of new plastered surfaces of walls and applying two coat of oil bound distemper of approved tint over a coat of primer all as specified and directed.

Material & Labour for preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint(Anti fungal) over a coat of primer (applied as per manufacturers instructions) including preparation of surfaces all as specified and directed.

Taking down steel window & ventilator with wire mesh/glazed shutter (Without taking of shutter from frame) area not exceeding 1.50 Sqm each including cutting holes in walls for removing holdfasts and making good the dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B1 (using 20mm graded stone aggregates) all as specified and directed

Taking down steel window & ventilator with wire mesh/glazed shutter (Without taking of shutter from frame) area exceeding 1.50 Sqm not exceeding exceeding 4.0 Sqm each including cutting holes in walls for removing holdfasts and making good the dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B1 (using 20mm graded stone aggregates) all as specified and directed

Taking down chowkat with shutter (Without taking of shutter from frame) area exceeding 1.50 sqm and not exceeding 4.0 sqm each including builders hardware and making good the disturbed surfaces all as specified and directed

Taking down chowkat with shutter (Without taking of shutter from frame) area not exceeding 1.50 sqm each including builders hardware and making good the disturbed surfaces all as specified and directed

Taking down shutters of any description exceeding 1 sq.m but not exceeding 2 sq. m each including including builders hardware all as specified and directed

Supply and fix powder coated (minimum thickness of powder coating 50 micron) anodised aluminium sections as in frames and shutters for doors,windows, ventilators any type with one or more rebates including joining cleat for fixing glazing clips, ruber neoprene packing,handles,hinges and other builders hardware,anodised aluminum snap beading screws etc. complete all as specified and directed. NOTE The rate quoted is deemed to be inclusive of all fixtures and fittings but not inclusive of glass and wire cloth which shall be measured and paid separately. However for measurement purpose the `kg' will be worked out as per the weight of aluminium section actually incorporated at site and the element of fittings and fixtures is deemed to be included in the rate quoted per kg.

Material & Labour for providing 4mm thick sheet glass, ordinary quality, ground or obscured or frosted, on one side not.exceeding 0.5 Sqm in each pane fixed with beads, gasket etc. complete as specified and directed.

Supply & Fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete as specified and directed.

Supply & Fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

Supply & Fix particle board 12 mm thick both side prelaminated interior grade as in aluminium partition including necessary joining cleats, glazing clip rubber neopreme packing complete all as specified.

Supply & Fix Floor door stopper of brass body and tongue with hard drawn steel spring,fixed in floor, overall length of cover plate 150mm all as specified and directed

Supply & Fix aluminium (extruded section body) door closer hydraulically regulated, designation No. 2,universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground in natural ground all as directed

Dismantling fencing wire mesh,any type all as directed

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, in soft/loose soil getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm,watering, and removing surplus soil to a distance n exc 50 m and making good surface all as specified and directed

Material & Labour for providing cement concrete type C2 1:3:6 (using 40mm graded stone aggregates) as in foundation filling,mass concrete and the like all as specified and directed

Supply and fix mild steel sections such as angle, flat iron etc of any size as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and directed

Supply and fix mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

Supply and fix mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

Supply only Chain link MS galvanisd fencing, any size or type all as specified and directed. NOTE Fixing only chain link fencing shall be measured and paid separately

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. NOTE Supply only chain link fencing shall be measured and paid separately

Supply and fix Mild steel screw bolts (machine made) ,diameter of neck 5 to 10 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long all as specified and directed

Material & Labour for preparation of new steel surfaces not otherwise described for over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. as in soils all as specified and directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point. as in soils all as specified and directed

Supply, lay,connect and test Reinforced concrete pipes, class NP2, 150 mm bore of pipe in mmlaid and jointed complete with collars all as specified and directed

Material and labour for providing cement Concrete bed (1:4:8) type D2 (using 40mm graded stone aggregates) to drain pipes (bore of pipe 150 mm) including forming cradles all as specified and directed

Material and labour for providing Brickwork with subclass ‘B’ burnt bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) including demolition of old brick masonry built in cement mortar all as specified and directed

Material and labour for providing, cement concrete 1:2:4 type B1 (using 20mm graded stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating and use and watse of steel formwork, all as specified and directed

Material & Labour for rendering 15 mm thick in cement mortar (1:4) on brick work or concrete masonry wall surface finished even and fair mixed with water proofing compound (WPC) all as specified and directed. NOTE Supply only WPC shall be measured and paid separately)

Supply only integral water proofing compound (ISI marked)

Material and labour for providing pre cast reinforced cement concrete 1:2:4 type B1(using 20mm graded stone aggregates) as in landings, cover slabs (for man holes etc) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including steel formwork set in cement mortar (1:6) including taking down old RCC all as specified and directed. NOTE : Reinforcement shall be measured and paid separately.

Supply and fix mild steel TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required

Demolition of concrete in ground floor (unreinforced) of any position not otherwise specifically provided all as directed.

Supply and fix stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof all as specified and directed

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar including concrete bed haunching etc all as directed.

Supply and fix 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes with fittings all as specified and directed

Supply and fix 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old pipes with fittings all as specified and directed

Supply and fix 110mm bore PVC (SWR) bends any radius all as specified and directed

Supply and fix 75mm bore PVC (SWR) bends any radius all as specified and directed

Supply and fix 110mm bore PVC (SWR) junction single,(Single T) equal or unequal all as specified and directed

Supply and fix 75mm bore PVC (SWR) junction single,(Single T) equal or unequal all as specified and directed

Supply and fix Grating doom 100mm dia of PTMT (Minimum weight 25gms) all as specified and directed

M &L for providing plain cement concrete 1:2:4 type B1(using 20mm graded stone aggregates) as in surface channels and drains complete all as specified and directed. NOTE Extra labour in forming channels shall be paid for in addition separately and deduction from the volume of concrete shall be made for the channel opening.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc all as directed.

Supply and fix in repairs vitreous china pedestal pan (EWC) including P or S trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe including providing coloured water closet seat and cover and mild steel chromium plated or aluminised hinging device etc including providing in repair 10 litres capacity PVC valveless syphonic action type flushing cistern (f.c.) low level white with inlet ball valve, float and handle including brackets and flush pipe all as specified and directed NOTE Make Parryware Cat No.C0278(EWC) Cat No.C8071 (seat cover) C-8090 (f.c.) or equivalent in approved makes listed in p.s.

Supply and fix in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests trap (Squatt pattern) complete including provision of cement concrete bedding and providing10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

Supply and fix in repairs 10 litres capacity PVC valveless syphonic action type flushing cistern (f.c.) low level white with inlet ball valve, float and handle including brackets and flush pipe all as specified and directed NOTE Make Parryware C-8090 or equivalent in approved makes listed in p.s.

Supply and fix chromium plated health faucet with stand 1.5m flexible lead including two way brass chromium plated 15mm bore dia of pipe angular stop cock all as specified and directed.

Supply and fix in repairs 15mm bore dia of pipe Bib taps,fancy type, cast copper alloy chromium plated capstan headed, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

Supply and fix in repairs 15mm bore dia of pipe stop valves, fancy type,cast copper alloy chromium plated capstan headed, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

Supply and fix 15mm bore dia of pipe Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed all as specified and directed.

Supply and fix Brass chromium plated shower rose 125mm size with or without swivel joints including fixing to steel pipe or union all as specified and directed.

Material and labour for providing pre poilshed Chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, tiles with grey cement and pigments,set, jointed and pointed in neat cement slurry in floors in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6 all as specified and directed

Material and labour for providing 75mm thick cement concrete 1:4:8 type D2 (using 40mm graded stone aggregates) as in sub base all as specified and directed

Material & Labour for Cleaning of existing sewer line 150mm bore SGSW pipes with fresh water including disposing the sludge /rubbish obtained during cleaning the sewage line to a distance not exc 50 m and spraying bleaching powder complete all as specified and directed all as specified and directed.

Material & Labour for Cleaning of existing sewer line 200/250mm bore RCC pipes with fresh water including disposing the sludge /rubbish obtained during cleaning the sewage line to a distance not exc 50 m and spraying bleaching powder complete all as specified and directed all as specified and directed.

Material & Labour for Cleaning of existing manhole any size and shape and depth n.exc 1.50 m from the ground level and getting out mud, sludge etc and scrapping/ washing the Manhole with fresh water and cleaning the bottom and side walls of Manholes with wire brush including disposing the sludge /rubbish to a distance not exc 50m etc complete all as specified and directed all as specified and directed.

Material & Labour for Cleaning of existing Septic tank/soak well of any size & any shape from the ground level and getting out mud, sludge etc and scrapping/ washing with fresh water and cleaning the bottom and side walls with wire brush including disposing the sludge /rubbish to a distance not exc 50 m etc and spreading bleaching powder on disposed material complete all as specified and directed. NOTE Internal dimensions shall be measured and paid

Material & Labour for providing loose aggregates using broken stone or boulders of size 20mm around transformer DG set and the like all as specified and as directed

Material & Labour for Cleaning and removal of blockage of existing gully trap of any size & any shape and getting out mud, sludge etc including disposing the same to a distance not exc 50 m and refixing the gully trap complete all as specified and directed.

JP ENTERPRISES