Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹29.2 LAccepted-AOC | ₹29.2 L Quoted ₹29.4 L | L-1 | Accepted-AOC L-1 |
| 2 | L-2₹30.7 LRejected-Finance | ₹30.7 L | L-2 | Rejected-Finance L-2 |
| 3 | L-3₹32.0 LRejected-Finance | ₹32.0 L | L-3 | Rejected-Finance L-3 |
| 4 | L-4₹37.0 LRejected-Finance | ₹37.0 L | L-4 | Rejected-Finance L-4 |
| Sl No | Description | Qty | Unit | MAA VAISHNO INDUSTRIES L3 | laxmi enterprises L1 | RRR CONSTRUCTIONS L2 | M/S MAA LAXMI CONSTRUCTION L4 |
|---|---|---|---|---|---|---|---|
| 1.00NOTE FOR ALL PAINITNG AND WATER PROOFING ITEMS :- The following precautionary measures shall be ensured by the contractor before and during execution of the work :- (i) All the painting works shall be got executed through original material manufacturing company or their authorised applicators as approved by GE and contractor should submit MOU with the manufacturing company and their authorised applicator alongwith performence guarentee otherwise recovary of Rs. @ 2000 per week will be made from contractor's dues from the date of commencement of work .Entire work shall be executed with the approved firm. All the material of smart periodical is to be precured only from approved firm and as mentioned against each item and application of materials to wall / ceiling surfaces to be done through smart automatic machines only and as mentioned against item No 1 to 16 . (ii) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (iii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iv) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery. (v) Recovary @ cost of material shall be done from contractor if any material found lying on site after completion of work as per manufacturer's instruction and quality satisfaction of Engineer-In-Charge. (vi) The work shall be executed upto 15mtr height and cost of suitable scaffolding shall be deemed to be included in quoted rates by the tenderer. (vii) Smart periodical work to be executed in sequential stages and all the stages to be got approved from GE / Engineer-In-Charge. Stage passing register duly signed to be kept in record. (viii ) The work will be carried out in following steps as appended below :- | |||||||
| 2.00 | Material & labour for complete removal of old existing treatment of wall (External / internal) and ceiling finishes using mechanical dry wall sander machine (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 320 Grit or above to completely remove old existing treatment for wall and ceiling surface and ready to take new surface finishes complete all as specified and directed | 4,200 | Sqm | 10 ₹42,000 | 20 ₹84,000 | 10 ₹42,000 | 15 ₹63,000 |
| 3.00 | Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and directed | 1,425 | Sqm | 10 ₹14,250 | 5 ₹7,125 | 10 ₹14,250 | 10 ₹14,250 |
| 4.00 | M&L for rendering, 15 mm thick, in cement mortar 1:6, over brick or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed | 225 | Sqm | 135 ₹30,375 | 90 ₹20,250 | 120 ₹27,000 | 190 ₹42,750 |
| 5.00 | M&L for rendering,15 mm thick, in cement mortar 1:4 over brick or concrete surfaces, finished fair and even without using extra cement, mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed
Note:-Integral water proofing compound shall be measured and paid separately | 1,175 | Sqm | 135 ₹1,58,625 | 90 ₹1,05,750 | 120 ₹1,41,000 | 195 ₹2,29,125 |
| 6.00 | M&L 10 mm thick rendering in ceilings in CM(1:3) finished even & smooth without using extra cement complete all as specified and directed | 50 | Sqm | 150 ₹7,500 | 90 ₹4,500 | 120 ₹6,000 | 200 ₹10,000 |
| 7.00 | Supply only integral water proofing compound conforming to IS-2645-1975 complete all as specified and directed | 89.46 | Kg | 30 ₹2,683.8 | 50 ₹4,473 | 40 ₹3,578.4 | 20 ₹1,789.2 |
| 8.00 | Material & labour for applying waterproof cement based putty @ 0.5 Kg(undiluted) per sq mtr. of average thickness 1.5mm in two coats on prepared wall (External / internal ) and ceiling surfaces as per sr item No 2 above in following steps:-
Step-1) Filling cracks in wall using crack seal compound Asian smart care crack seal or equivalent
Step 2) Mix the putty powder @ 0.5 kg/sqm by adding 35 to 40% water by volume or as per approved manufacturer's instructions and mix it with electric putty mixer with the mixing capacity of min 2.5 kg putty per minute upto 5 to 10minutes .
Step 3) Apply the first coat of the prepared mix with the help of fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent of putty application having flow speed of max 2.04 ltrs per minutes with a maximum pressure 3300 PSI with bottom to top configuration.
Step 4) Allow 6-8 hrs to dry putty surface.
Step-5) Apply the second coat of the prepared mix with the help of fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent of putty application having flow speed of max 2.04 ltrs per minutes with a maximum pressure 3300 PSI with horizontal configuration.
Step-6) Allow 6-8 hrs to dry putty surface then prepare the surface by electronic wall sander machine to apply subsequent coats of primer complete all as specified and directed.
Note:- Primer shall be measured and paid saperately under relevant item. | 5,050 | Sqm | 40 ₹2,02,000 | 25 ₹1,26,250 | 50 ₹2,52,500 | 60 ₹3,03,000 |
| 9.00 | Material & labour for applying one coat of acrylic water based interior grade primer @ 0.7 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) or as per approved manufacturer's instructions to be applied with fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent of paint application with a flow speed of min 2.0 ltr per minute having a pressure of 3300 PSI on prepared and wall (External ) surfaces as per sr item No 2 & 3 above Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. | 1,350 | Sqm | 25 ₹33,750 | 30 ₹40,500 | 50 ₹67,500 | 60 ₹81,000 |
| 10.00 | Material & labour for applying one coat of acrylic water based Exterior grade primer @ 0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) as per approved manufacturer's instructions to be applied with fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent of paint application with a flow speed of min 2.0 ltr per minute having a pressure of 3300 PSI on prepared and wall (External ) surfaces as per sr item No 1.1 & 1.2 above Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. | 3,700 | Sqm | 45 ₹1,66,500 | 80 ₹2,96,000 | 50 ₹1,85,000 | 60 ₹2,22,000 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
11 Jun 2026, 6:00 pmClosed
GE (AF) FARIDABAD
GE (AF) FARIDABAD
PERIODICAL SERVICES, REPAIR TO LEAKAGE, SEEPAGE, OVERHEAD TANKS, ROOFING, FALSE CEILING AND OTHER MISC ITEMS AT AF STN FARIDABAD UNDER AOR OF GE (AF) FARIDABAD
2026_MES_766833_1
GE (FBD)/AF-T-02/2026-2027
Open Tender
Civil Works
180 days
Faridabad
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) FARIDABAD
₹90,000
Yes
3 Jul 2026
21 May 2026
13 Jun 2026
21 May 2026
11 Jun 2026
28 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 2 | Material & labour for complete removal of old existing treatment of wall (External / internal) and ceiling finishes using mechanical dry wall sander machine (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 320 Grit or above to completely remove old existing treatment for wall and ceiling surface and ready to take new surface finishes complete all as specified and directed | 4,200 | Sqm | - | - |
| 3 | Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and directed | 1,425 | Sqm | - | - |
| 4 | M&L for rendering, 15 mm thick, in cement mortar 1:6, over brick or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed | 225 | Sqm | - | - |
| 5 | M&L for rendering,15 mm thick, in cement mortar 1:4 over brick or concrete surfaces, finished fair and even without using extra cement, mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed
Note:-Integral water proofing compound shall be measured and paid separately | 1,175 | Sqm | - | - |
| 6 | M&L 10 mm thick rendering in ceilings in CM(1:3) finished even & smooth without using extra cement complete all as specified and directed | 50 | Sqm | - | - |
| 7 | Supply only integral water proofing compound conforming to IS-2645-1975 complete all as specified and directed | 89.46 | Kg | - | - |
| 8 | Material & labour for applying waterproof cement based putty @ 0.5 Kg(undiluted) per sq mtr. of average thickness 1.5mm in two coats on prepared wall (External / internal ) and ceiling surfaces as per sr item No 2 above in following steps:-
Step-1) Filling cracks in wall using crack seal compound Asian smart care crack seal or equivalent
Step 2) Mix the putty powder @ 0.5 kg/sqm by adding 35 to 40% water by volume or as per approved manufacturer's instructions and mix it with electric putty mixer with the mixing capacity of min 2.5 kg putty per minute upto 5 to 10minutes .
Step 3) Apply the first coat of the prepared mix with the help of fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent of putty application having flow speed of max 2.04 ltrs per minutes with a maximum pressure 3300 PSI with bottom to top configuration.
Step 4) Allow 6-8 hrs to dry putty surface.
Step-5) Apply the second coat of the prepared mix with the help of fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent of putty application having flow speed of max 2.04 ltrs per minutes with a maximum pressure 3300 PSI with horizontal configuration.
Step-6) Allow 6-8 hrs to dry putty surface then prepare the surface by electronic wall sander machine to apply subsequent coats of primer complete all as specified and directed.
Note:- Primer shall be measured and paid saperately under relevant item. | 5,050 | Sqm | - | - |
| 9 | Material & labour for applying one coat of acrylic water based interior grade primer @ 0.7 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) or as per approved manufacturer's instructions to be applied with fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent of paint application with a flow speed of min 2.0 ltr per minute having a pressure of 3300 PSI on prepared and wall (External ) surfaces as per sr item No 2 & 3 above Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. | 1,350 | Sqm | - | - |
| 10 | Material & labour for applying one coat of acrylic water based Exterior grade primer @ 0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) as per approved manufacturer's instructions to be applied with fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent of paint application with a flow speed of min 2.0 ltr per minute having a pressure of 3300 PSI on prepared and wall (External ) surfaces as per sr item No 1.1 & 1.2 above Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. | 3,700 | Sqm | - | - |
| 11 | Material & labour for applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint @ 0.2 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio (Minimum) of approved tint as per approved manufacturer's instruction over prepared and primed surface of external wall with fully automatic airless spray machine TruCare Graco Ultramax II 490 PC Pro or equivalent of paint application with a flow speed of min 2.0 ltr per minute having a pressure of 3300 PSI as per sr item No 2 to 3 above .Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed. | 3,700 | Sqm | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
BOQ_858804.xls
BOQ • 0.58 MB
Tenderdocu02.pdf
Tender Documents • 1.07 MB
Download all tender documents and submit your bid