CERTAIN REPAIRS TO JCOs/ORs MD ACCN AT TAWI AND JHANGAD ENCLAVES UNDER AGE B/R-II OF GE SATWARI

Amount

Note:- Work will be carried out upto 4th storey of bldgs and quoted rates of items shall be deemed to include the cost of necessary formwok and scaffolding required as per site conditions.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazo dado from wall surface (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing surface with neat cement slurry with 3.0 kg of cement per sq.metre and removing unserviceable material outside defence land complete all as specified and directed

Dismantling of stone slabs and tiles of any description or thickness in floors, laid dry or pointed in any mortar complete all as specified and directed.

Demolition of cement concrete (un-reinforced) ground floor and pavings n. exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site out side defence premises complete all as specified and directed.

Demolition of brick work or stone/boulder masonry , built in cement mortar or cement lime mortar including all quoins, arches & pillars etc of any description and in any position and removing unserviceable material from work site to outside defence premises complete all as specified and directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed.

Taking down shutter exc 1.0 sqm and n. exc 2.0 sqm each and removing from site complete all as specified and directed.

Taking down shutter exc 1.0 sqm and n. exc 2.0 sqm each and refixing in the same opening complete all as specified and directed.

M&L for 25 mm thick cement concrete 1:2:4, type B-0, (using 12.5 mm graded crushed stone aggregate) as in floors, finished even and fair complete all as specified and directed.

M&L for 75 mm thick plain cement concrete 1:4:8, type D2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed.

M&L for 7 to 8mm thick non skid coloured ceramic tiles (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and poined in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement motar 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles,300x450x7 mm thick, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for 7 to 8mm thick non skid coloured ceramic joint less tiles (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and poined in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement motar 1:6 complete all as specified and directed.

M&L for 7 to 8mm thick non skid coloured ceramic joint less tiles (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm,as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F machine cut kota stone slab in flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,cutting and mirror polishing over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

S&F machine cut kota stone slab in vertical surfaces, risers of steps (one piece including rounding/mouldings of edges of risers), 18-20 mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing cutting and mirror polishing over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for 15 to 18 mm thick black granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nose edging complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 , type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection, laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. surfaces finished even and fair including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .

M&L for providing and laying 60 mm thick factory made charmfered edge cement concrete paver block of M-35 grade of approved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc of required strength , thickness & size/ shape made by table vibratory method using PU mould, laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for plain cement concrete 1:2:4 ,type B1(using 12.5mm graded crushed stone aggregates)as in lintels upto 1.5m clear span, window or door cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings,side posts of precast jallies etc. including slightly rounded or chamfered angles including necessary formwork complete all as specified and directed.

M&L for Chequered cement concrete tiles 30cmx30cmx25mm thick, with grey cement and pigment, set ,jointed and pointed in neat cement slurry as in floors, laid over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, using old size bricks, straight or curved on plan exceeding 6m mean radius , built in cement mortar 1:6 complete all as specified and directed.

All as per Srl item No -26 here-in-before but except bricks complete all as specified and directed.

M&L for brick work with old size sub-class 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed .

M&L for rendering 15mm thick in cement mortar 1:6 on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all s specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 including mixing of water proofing compound on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all s specified and directed. Note : Water proofing compound shall be measured and paid separately as supply only.

M&L for rendering 5 mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for capillary rise treatment of walls with following specification:- Base coat: Berger HS Latex plus or equivalent in make specified in PS Consumption base coat: 0.3 kg/m2 Second and Third coat: Latex sheild 2K or equivalent in make specified in PS Consumption top coat: 3 kg/m2 System requirements: density: 2.00 kg/ltr compressive strength: 0.5 N/mm2.

Complete removal of existing water proofing roof treatment of any description including under layer, taking down of cement plaster,concrete and mud pushka of any thickness and removal of debris from site to a place outside defence land and clean the surface of roof with water and remove dust complete all as specified and directed.

M&L for cleaning of the exposed concrete slab & like and repairing the surface irregularities like cracks, potholes with HS Latex Plus(or equivalent) & cement in mixing ratio of 1:4 as per manufacturers method statement by Berger HS Rapairo (or equivalent) including 15mm thick rendering in cement mortar 1:3 complete all as specified and directed .

M&L for HomeSheild PU Roofkoat(or equivalent) is a one component liquid ,solvent free , cold applied , water-proofing membrane that is highly elastic and UV resistant with 10 years warranty .ASTM D 6083-97 a Waterproofing and heat reflecting system having following key performance properties:- a) UV resistant ,prevent yellowing and weathering b) Highly elastic upto 350% and crack bridging c) Excellent adhesion on porous and non-porous substrates d) Tensile Strength >10 N/mm2 with GeoTextile fleece e) Soler Reflective Index (SRI) more then 109-111 ASTM E1980-11 System: First coat:Providing and applying primer over the prepared surface with HS PU roofkoat Primer(or equivalent) Coverage: 0.2kg/sqm(with 50% dilution of water) Reinforcement: Geotextile 40 gsm Second coat:Home sheildroofkoat(or equivalent) Consumption: 0.5 kg/sqm. Third coat: HS PU roofkoat(or equivalent) Consumption : 0.8 kg/sqm. System buildup-1.5kg/sqm with geotextile of 40gsm

M&L for plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in padding, laid to required slope over roof finishing complete all as specified and directed.

M&L for glass fibre reinforced modified cementitious coating system before the final coat of Latex Shield 2K (or equivalent). Base coat: Berger HS Latex plus (or equivalent) both on wall (upto 1 mtr min height) and floor. Consumption base coat: 0.3 kg/sqm Reinforcement: Glass fiber Second and Third coat: Latex sheild 2K (or equivalent) both on wall (upto 1 mtr min height) and floor. Consumption top coat: 3 kg/sqm System requirements: density: 2.00 kg/ltr compressive strength: 0.5 N/mm². • Wall penetration through the RCC slab must be sealed using Berger HS RepirO(or equivalent). • Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus(or equivalent) modified mortar with a bonding coat of Berger HS Latexplus(or equivalent) modified cement slurry upto 5ft. • All depressions, unevenness, surface honeycombing shall be repaired using Berger HS Latex plus (or equivalent) modified polymer mortar with a bonding coat of Berger HS latex plus(or equivalent)modified cement slurry including cleaning of RCC surface to remove dust, loose particles, etc with compressed air or any other suitable technique depending on site conditions, grinding any sharp edges, etc and applying an avg 75 mm thick PCC 1:1.5:3 (nominal mix) (using 12.5 mm graded crushed stone aggregate) mixed with water proofing compound with proper slope shall be laid to a slope of 1:40 towards spout on RCC slab complete all as specified and directed .

M&L for rendering 10mm thick in cement mortar 1:4 mixed with water proofing compound on roof surfaces , surface finished even and smooth without using extra cement complete all as specified and directed. Note:- water proofing compound will be measured and paid separately

Supply only liquid water proofing compound.

S&F 32 mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in as spout to pour out residual water out from the treated area complete all as specified and directed .

M&L for hard core of gauge not exceeding 63mm using broken stone or boulders, deposited, spread and leveled in layers not exc 15cm thick, watered and rolled/rammed to a true surfaces complete all as specified and directed .

S&F pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weight (04 Nos) and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type B-1 including PCC 1:3:6 type C1 as in back fill to chowkats complete all as specified and directed.

S&F pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick MS sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weight (08 Nos) and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type B-1 including PCC 1:3:6 type C1 as in back fill to chowkats complete all as specified and directed.

S&F 35 mm thick factory made 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of 9mm thick BWP commercial plywood .The size of rail and stiles as per IS: 1003(Part-1), kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed.

M&L for 35mm thick factory made flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F factory made 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifications and drawing including making good to distributed surface of walls complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification.

S&F stainless steel designer handle (heavy type) 200 mm size, fixed in drawers or shutters of cupboards complete all as specified and directed.

S&F in repair continuous (piano) hinges,30mm width, heavy duty, mild steel ,bright finish or electrogalvanised suitable for 19mm thick shutter complete all as specified and directed.

M&L for Ball catches with 8mm dia steel ball and brass body and striking plate including letting in as fixed complete all as specified and directed.

M&L for factory made box type steel windows, double shutter,outer frame made out ERW TUBE 'P section (65x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) openable shutters side hung including pintle hinges with two nos MS tower bolts 150mm size on each shutter, steel handle and stopper of 'Z' section as specified complete with sash bars dovetailed or welded ready for glass fixing and wire gauzed fixing with suitable fittings/opening for cooler/AC where required .Steel windows will be double shutter (external glazed and internal wire gauzed) complete all as specified in Drg No CEPZ/C-TD/27/13 of sheet No 1/4 to 4/4 complete all as specified and directed. Note: - The quoted rate shall be deemed to include :- (i) Provn of one coat of coal tar on the ends of steel frame in contact with brick/conc surface (ii) 04 Nos MS steel lugs of MS flat 20 x 5mm & 20 cm long over all welded to frames (iii) PCC block for embedding lugs. .(iv) Provn of 12 mm square bar as guard bar, spacing 100 mm c/c all as per drg and including 4 mm thick flat iron for fixing of guard bars all around .

M&L for aluminium ventilator, fixed type, including figured glass at bottom and stainless steel wire mesh at top complete all as specified and directed .

M&L for 4 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with any type of beads in squares n. exc 0.5 sqm each pane complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&Fin repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 150 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed .

S&F 100mm long mild steel butt hinges, medium weight , cold rolled fixed with screws complete all as specified and directed

S&F aluminium anodised barrel tower bolts, 150mm long of extruded section, fixed to doors with screws complete all as specified and directed.

S&F aluminium anodised barrel tower bolts, 200mm long of extruded section, fixed to doors with screws complete all as specified and directed.

S&F aluminium anodised , cast type handle 125mm size complete all as spcified and directed.

S&F in repair 200 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate including fixing to pressed steel frames with flat iron 40x3mm with necessary welding work complete all as speciied and directed

S&F aluminum alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminum alloy and fixed complete all as specified and directed.

S&F in repair Rotational moulded polyethlene water storage tanks of 1000 litres capacity (cylindrical vertical with closed top) with plastic lid cover, hoisted and fixed in position including ball brass valves, high pressure, with polythene float and fly nut screwed for 20mm bore iron pipe complete all as specified and directed ..

S&F in repair Rotational moulded polyethlene water storage tanks of 500 litres capacity (cylindrical vertical with closed top) with plastic lid cover, hoisted and fixed in position including ball brass valves, high pressure, with polythene float and fly nut screwed for 20mm bore iron pipe complete all as specified and directed ..

S&F 20 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F 25 mm bore ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F CPVC pipes having outer dia 20mm,SDR11, including all necessary fittings, fixed to walls/ceiling with clamps or laying in floors including taking down or up GI tubing with fittings & cutting chases where required complete all as specified and directed.

S&F Galvanised steel tubing, 15mm bore, medium grade with all fittings, fixed to wall/ceiling and laid in floors including taking down existing GI tubing complete all as specified and directed

S&F Galvanised steel tubing, 20mm bore, medium grade with all fittings, fixed to wall/ceiling and laid in floors including taking down existing GI tubing complete all as specified and directed

S&F in repair 25mm outer dia stainless steel decorative drapery rod of thickness 20 gauge with stainless steel brackets near to ends with stainless steel finials at both ends and necessary fittings complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including stainless steel brackets, brass chromium plated waste coupling 32mm bore, waste pipe HDPE 32mm bore including 15mm dia chromium plated pillar tap swan neck, 450 mm long PVC connection complete all as specified and directed

S&F vitreous china corner wash hand basin of suitable size & any design including 15mm dia pillar tap, swan neck, fancy, chromium plated, HDPE PVC connection 450 mm long, 32mm bore HDPE waste down pipe,750 mm long and stainless steel brackets complete all as specified and directed.

S&F in repair vitreous china white wash hand basin of size 55X45X20cm with full pedestal of height 82cm completeincluding 15mm dia pillar tap, swan neck, fancy, chromium plated, chromium plated waste coupling ,waste pipe complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.

S&F in repair PVC waste pipe 32mm bore for sink /WHB of required length complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm of dia with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed.

S&F in repair pillar taps, swan neck, chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe of 15mm bore complete all as specified and directed.

S&F in repair 15mm bore Bib taps long body, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F two way angle cock with flange, chromium plated, fancy type, cast copper alloy ,screwed down, screwed for 15 mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair chromium plated toilet paper roll holder complete all as specified and directed .

S&F in repair PVC connection 15 mm x 450 mm including PVC check nut at both ends complete all as specified and direced.

S&F in repair chromium plated soap dish of size 160x160x90mm, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F chromium plated tubular towel ring of 150mm dia, fixed to plugs with chromium plated brass screw including wooden/plastic beads complete all as specified and directed..

S&F in repair chromium plated stainless steel towel hanger with 06 hooks fixed to wall complete all as specified and directed.

S&F in repair fancy type sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass, shelf 12 cm wide with chromium plated bracket guard and railing 45 cm long complete all as specified and directed.

S&F in repair corner glass shelf 5.5mm thick of size 30cm with chromium plated bracket guard and railing fixed with and including screws and wooden/plastic cleats complete all as specified and directed .

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .

S&F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .

S&F in repair 15mm dia stop cock, cast copper alloy, fancy type,chromium plated, concealed type with long shank with crutch or butterfly handle, screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed .

S&F in repair angle valve ,cast copper alloy , fancy type, chromium plated, screwed down for high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and dircted.

S&F in repair vitreous china squatting pan, Orissa pattern, size 580 x 440mm white with integral foot rest, cast iron 'P' or 'S' trap of size 100mm, including provision of plain cement concrete bedding and connection to trap and to flushing pipe, anti syphonage pipe etc and making good the floors complete all a specified and directed

S&F in repair vitreous china wash down water closet pan (pedestal pattern) of size 520x360x390mm of approved colour including connection pipe to union of flushing cistern, inlet and overflow pipes, connecting only to flushing cistern, anti-syphonage pipe with PVC flush pipe of 32mm dia including plastic seat with cover, white in colour with mild steel chromium plated hinging and 'P' or 'S' trap device,SS jet with pipe complete all as specified and directed

S&F in repair 10 litres PVC, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float 32mm PVC 'L' bend and handle including brackets complete all as specified and directed

S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connectios and fixed in position complete all as specified and directed.

S&F in repair PVC (SWR) floor trap plain with grating having diameter of outlet 75 mm including jointing with solvent cement to waste pipe, laid in cement concrete 1:2:4 type B-1 complete all as specified and directed.

S&F in repair PVC (SWR) type B pipes, 75 mm bore, single socketed, in any length with rubber ring joints laid in treanches/floor or fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed.

S&F in repair PVC (SWR) type B pipes, 110 mm bore, single socketed, in any length with rubber ring joints laid in treanches/floor or fixed to walls with nail at spacing of 1m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed.

S&F PVC (SWR) bends of any radius, 110 mm bore complete all as specified and directed

S&F PVC (SWR) bends of any radius, 75 mm bore complete all as specified and directed

S&F PVC (SWR) bends with access door any radius, 100 mm bore complete all as specified and directed

S&F PVC (SWR) bends with access door any radius, 75 mm bore complete all as specified and directed

S&F PVC (SWR), junction single, (single 'T') with access door equal or unequal for 110 mm bore complete all as specified and directed

S&F PVC (SWR), junction single, (single 'T') with access door equal or unequal for 75 mm bore complete all as specified and directed

S&F UPVC (SWR) vent cowl 75 mm dia complete all as specified

S&F UPVC (SWR) vent cowl 110 mm dia complete all as specified

S&F in repair sinks , made of 1mm thick stainless steel,overall size of sink 590mm x 460mm with bowl size 540mm x 410mm x 230mm, plugs, washers, waste pipe , union, CP waste coupling and cantilever brackets embedded in cement and sand mortar in wall complete all as specified and directed

S&F plate rack made of 1.0mm thick stainless steel of size 90x80x25 cm fixed with steel fastners or steel screws including taking down wooden plate rack complete all as specified and directed

M&L for framed work such as grills , gratings etc with ends of bars shouldered and /or riveted or forged into spikes , framed guard bars, barred iron doors, ladders, framed balusters: walk ways , railings frame work of water tanks and similar work confirming to Fe290, Gde E-165 complete all as specified and directed

M&L for cutting (in stone,concrete block or slab,walls) chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, Iintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting exc 10cm but n.exc 20cm grith complete all as specified and driected.

Dismantling concrete from RCC members by chiseling , exposing the reinforcement without disturbing ,get the reinforcement free from rust by sand blasting/using rust removal chemical , providing additional reinforcement at places ( if required) duly welded with existing reinforcement , binding the concrete with 10mm gauge 50 mmx50 mm welded wire mesh & tack , securing with clips / blinding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control ,neccssary form work & scaffolding up to four storey and including height of head room complete surface of guniting to be finished fair with 10 mm thick cement plaster with chicken wire mesh in cement mortar 1:4 with water proofing compound @3% by weight of cement and recron 3 S as per manufacturer instructions, cleaning & removing of waste meterial etc as appply two coats of Dr fixit /pidilite/sika/Fosroc new coat ezee at interval of 8 hours cure for the surfaces complete all as specified and driected.

M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over a coat of waterproof cement based putty @ 1 Kg(undiluted) per sqm. of average thickness 1 mm over the new plastered surface complete all as specified and directed .

Complete removal of existing treatment including washing, rubbing down with sand paper and stopping of painted surfaces including preparation of old plastered surfaces of walls, chajjas, fascia, face of columns, beams etc. and applying two coat of weather proof exterior emulsion including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over a coat of waterproof cement based putty @ 1 Kg(undiluted) per sqm. of average thickness 1 mm complete all as specified and directed .

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over one coat of wall care putty 1 to 2 mm thick complete all as specified and directed..

M&L for complete removal of existing treatment on wall surfaces, including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of oil bound distemper over two coats of wall care putty 1 mm thick each complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for complete removal of existing treatment on ceiling surfaces, including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of white wash complete all as specified and directed.

M/S VED PAUL MAHAJAN (BID ID -3317354)

M/s Hansi Builders and Consultants (BID ID -3324849)

M/S Shesh Paul Gupta (BID ID -3317043)

THAKUR BUILDERS AND CO (BID ID -3317696)

NARESH KUMAR AND COMPANY (BID ID -3325275)