CE/CW/11/2025-26(Parking Shed)

Amount

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to beused or auctioned up to lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm thickness.

Excavation in Marshy Soil (Excavation for roadway in marshy soil with hydraulic excavator 0.9 cum bucket capacity including cutting and loading in tippers and disposal with in all lifts and lead upto 1000 metres, trimming of bottom and side slopes in accordance with requirements of lines, grades and cross sections.)

Removal of Unserviceable Soll with Disposal upto 1000 metres (Removal of unserviceable soil including excavation, loading and disposal upto 1000 metres lead but excluding replacement by suitable soil which shall be paid separately as per clause 305.)

Sand Filling in Foundation Trenches as per Drawing & Technical specification

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (ii)for grading II material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness,hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. Using stone screening Type-B 11.2mm for Gr.III

Providing and laying interlocking concrete block pavement with M40 grade of concrete blocks having thickness 80mm as per technical specification clause 1504 complete including carriage. a) Including carriage.(b)Excluding Edge block/Edge restraint

Providing and laying M-40 grade cement concrete Edge block/ edge restraints complete at per Technication Specification clause 1504

Concertina wire (each bundle contains 2.5m length) as directed by the department.

R.B.T wire (each bundle contains 25.00m length) as directed by the department.

Y shaped hinges of size (600mmx600mmx1300mm) Equal angle bar (one Y shaped hinge weighs 9.50kg) as directed by the department.

Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto1.5m and lead upto 50m as perTechnical Specification Clause302.3(Manual method should be adopted where machines can not be deployed due to site condition

Construction of dry rubble flooring at cross drainage works

PCC 1:3:6 in Foundation (Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days,)

Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204, With crushed stone, RCC Grade M20 For height upto 5m

Supplying, fitting and placing TMT IS:1786 (Fe 500) bar reinforcement in sub-structure complete as per 6 drawing and technical specifications. TMT-IS 1786 (Fe-1500 D) Primary Producer (TATA/SAIL/Esser Steel/Jindal panther steel/Shyam steel or equivalent)

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification.

Dismantling of Flexible Pavements (Dismantling of flexible pavements and disposal of dismantled 2.5 materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately) A. Bituminous Courses

Plain/Reinforced cement concrete, in sub structure complete as per drawing and tecnnical specification and steel shuttering formwork C) PCC Grade M25 (a) Ht up to 5.00 M Using concrete Mixer Base

Cement Plaster (In coarse Sand)

Providing, fitting and fixing of iron cover of size 750mm x 1000mm made of MS flate 45mm x 6 mm at 50mun c/c across the drain and MS flate 50 x 8 mm at 150mm c/c along the drain including providing of rectangular hollow section of size 150mm x 75mm x 6mm at 1500mm interval with welding etc complete as directed by the department

Applying primary coat over new steel and other metal surtace over 100m in width or girth after preparing the surface by throughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. (a)with ready mixed "red-lead/red oxide"primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of 7/ approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (1) Surtaces over 100mm in width or girth. b).High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Convex Mirrer Supplying fitting & fixing of Aluminium Backed Flexible Prismatic of 3M make as per technical specifications as directed by the department.

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H's fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance

Providing Sparkle Solar Road Studs, manufactured by Tata B.P. Solar India Ltd. Of size (125mm x 125mm), 90mm height (from bottom of shank to the top of stud) with detachable battery, m6LEDs-three on each side for Bi-directional studs/3 LEDs on one side for unidirectional studs, ultra bright LED in amber and red colour, weight per stud 700+25 gms, flash rate of 50-65 times per minute completely water resistant and each weather proof with replacement warranty and free maintenance fro one year from the date of installation of stud on road-(installation should be made using adhesives and procedures recommended by manufacturer under the supervision of their competent technician). a) Bi-directional Stud-

Retro reflectorised Traffic sign: Providing and erecting of Retro-Reflectrorised cautionary, mandatory & informatory sign as per IRC: 67 made of high intensity encapsulated lens type reflective sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick fixed on an angle iron of 25x25x4mm supported on a mild steel angle iron post 75mm x 75mm x 6mm firmly fixed to the ground by means of properly 60cm circular

Repairing of Cattle Bridge at State Guest House No. 1 Approach Providing, fitting and fixing of M.S. channels R.S. joists cattle bridge over the Cross Drain as Approach Slab including welding the channel of size 125x65x5.30mm placed over the R.S. joists of size 150 x75x 5mm @1.00m apart on the prepared beam on the drain wall etc. including all labour and transportation etc. as per drawing and technical specification.

Excavation for Structures (Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of ahoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. watering and ramming etc. and removal of surplus earth with all lead and lifts as (a) directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. a) In ordinary soil

Providing brick soling in earthen shoulder with stone/best quality jhama brick, sand packed and laid to true line and level and in panel after preparing the subgrade including earthwork in excavation as directed including all labour and materials and if necessary dewatering, complete. Bricks on flat soling

Supplying, fitting and placing TMT IS:1786 (Fe 500) bar reinforcement in sub-structure complete as per 6 drawing and technical specifications. TMT-IS 1786 (Fe-1500 D) Primary Producer (TATA/SAIL/Esser Steel/Jindal panther steel/Shyam steel or equivalent) For footing: 10 mm dia 125 c/c

Plain/Reinforced cement concrete, in sub structure ads complete as per drawing and technical specification and steel shuttering formwork RCC Grade M25 Height upto 5m

Steel work welded in built up sections/framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a primin coat of approved steel primer all complete.

Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or 3 with G.I. limpet washers filled with white lead, including a coat of

Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and technical specifications

Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80litrs/10 sqm complete including cost of Priming coat.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of

A B L CONSTRUCTION (BID ID -271756)