Interior Renovation and Refurbishment works at NRIDA office, NBCC Tower, Bhikaji Cama Palace, New Delhi

Bill of Quantity

S.No DSR-2023 DESCRIPTION UNIT TOTAL Qty RATE

1 SUB HEAD-I :- DISMENTALING AND DEMOLISHING

Demolish Cement concrete manually / by machanical means including disposal of material within 50 mtr lead as

Nominal concrete 1:3:6 or rich mix (incl. equivalent mix)

Demolish RCC work manually / by machanical means including stacking of steel bars and disposal of

unserviceable material within 50 mtr lead as per direction of EIC

Demolish Brick work manually / by machanical means including stacking of serviceable and disposal of

unserviceable material within 50 mtr lead as per direction of EIC

Dismetaling tiles work on floor and roofs laid in cement mortar including stacking material within 50 meters lead.

For thickness of tiles 10mm to 25mm

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of dismantled

material within 50 metres lead, as per direction of Engineer-in-Charge.

Dismantling gypsum board / aluminium partition including removal of boards, aluminium framework, screws, fasteners,

1.6 15.57 stacking of serviceable material and disposal of unserviceable material within 50 metres lead, complete as per direction of sqm 58 ₹ 56.35 ₹ 3,268.30

Engineer-in-Charge.

1.7 15.6 Disposal of building rubbish / malba / similar unserviceable, dismantled or demolished material by mechanical transport cum 20 ₹ 263.95 ₹ 5,279.00

including loading, unloading and stacking, beyond 50 metres initial lead, complete as per direction of Engineer-in-Charge.

1.8 15.52 Dismantling existing flushing cistern (PVC / CI / low level / high level / concealed type) including disconnecting water supply each 20 ₹ 112.05 ₹ 2,241.00

connections, fittings and making good the surface, complete as per direction of Engineer-in-Charge.

2 SUB HEAD-II :- PAINTING AND FINISHING WORK

2.1 13.1 12mm cement plaster of mix :

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound )

2.2 13.83 content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats

wherever required to achieve even shade and colour.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic

Compound ) content.

13.85.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre sqm 2100 ₹ 73.95 ₹ 1,55,295.00

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even

and smooth complete.

3 SUB HEAD-III :- WOOD AND P. V. C. WORK

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of

3.1 9.21 block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with

vertical grains or cross bands and face veneers on both faces of shutters:

Digitally signed by AMIT

S.No DSR-2023 DESCRIPTION UNIT TOTAL Qty RATE

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 10 ₹ 2,392.65 ₹ 23,926.50

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish

3.2 9.127 with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046

Type S, including cost of adhesive of approved quality- 1.0 mm Thick

3.4 9.70 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

3.5 9.82 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. Each 6 ₹ 121.65 ₹ 729.90

PARTITIONS & PANELLING

Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing

and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120

gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm

and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of

12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48

mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of

floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,

including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal

screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by

25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The

boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99

mm width (0.9 mm thick having two flanges of 9.5mm Each) to be provided at the horizontal joints of two boards,

fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with

recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher

and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge

75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board

conforming to IS: 2095: (part I): 2011 (Board with BIS certification marks)

Cladding using 12mm thick HDHMR board on existing frame/ surface.

4 SUB HEAD- IV :- CLADDING WORK

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for

kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade,

4.1 8.2 colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with

white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to

edges to give high gloss finish etc. complete at all levels.

8.2.2 Granite stone slab colour black, Cherry/Ruby red

Digitally signed by AMIT

S.No DSR-2023 DESCRIPTION UNIT TOTAL Qty RATE

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge

to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto

150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity

4.4 8.5 counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including Each 2 ₹ 978.70 ₹ 1,957.40

moulding, rubbing and polishing of cut edges etc. complete.

ACRYLIC SOLID SURFACE FOR COUNTER TOP :

Providing and fixing storage of approved height and depth up to 650 mm with Caracas and Shutters/ Shelves /

Drawers to be made out of 25 mm thick BWP Ply board as approved by Architect/Designer with all surfaces

faced with upto 1.25 mm thick laminate and PVC edge Banding as per the selection of the Architect/Designer.

Storage to Comprise of Adjustable shelves / Drawers with Auto close Telescopic channels of Hettich/ Hafele

/Sugastone Make along with Water Dispenser & Dustbin Compartment provided with 150 mm Dia Grommet with

SS 304 Swivel Lid and Flap Shutter. Cost to include Counter Top formed with 25 mm Thk Marine Ply dressed with

12mm Thk Acrylic Solid Surface and fascia up to 50 mm height on all visible sides as designed by

Architect/Designer to make to be flush in level with adjoining surfaces and splash-back up to 100 mm height all

laid/fixed with Adhesive as per the proprietary Acrylic Solid Surface Manufacturer.

Providing and fixing vetrified glazed wall tiles conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as

approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3

(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white

cement mixed with pigment of matching shade complete.

Tiles Size : 600x1200 mm

Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain

lining / cladding with necessary screws, including priming coat on unexposed surface with :

8.28.1 Decorative veneer facings of approved manufacture sqm 35 ₹ 1,946.25 ₹ 68,118.75

TOILET MIRROR PANELLING

P/F Mirror on a backing of Hollow Panelling of up to 75 mm depth and formed with 12 mm thick HDHMR MDF

with provision of light coves and finished with 6mm Mirror of Glass framed in Metal Jamb Frame of PVD finish of

4.8 NSR-17 Approved make to be flush in level with adjoining surfaces. Cost to also include Neutral Silicon Adhesive or sqm 20 ₹ 4,896.00 ₹ 97,920.00

equivalent manufacturer suggested adhesive as per approved Design make and edge polishing. Cost to also

include frosting/de mirroring as per Architect/Designers Design. Make : Saint Gobain / ASI / Modi or Equivalent

Digitally signed by AMIT

S.No DSR-2023 DESCRIPTION UNIT TOTAL Qty RATE

LACQUERED GLASS FINISH

Providing and fixing Lacquered Glass on a backing of Existing Partition and Panelling and faced front side with 6

mm thick MDF and finished with 6mm Lacquered Glass Super White Colour or As Approved by the Architect to

make it flush in level with adjoining surfaces. Cost to also include Neutral Silicon Adhesive or equivalent

manufacturer suggested adhesive as per approved Design make and edge polishing. Item Billing shall be done on

Installed area on site with wastage to be included in the rates.

Providing and fixing factory finished Smart PET panels in thickness up to 12 mm of 0.5 NRC in wave and other 3D

pattern as per design and embossing as per the instructions of the Architect/Designer. Cost to include screen

4.82 NSR-20 printing work and Provision for making Champhered Edges and Grooves in different cuts like fishbone etc as per sqm 20 ₹ 3,685.00 ₹ 73,700.00

the instruction of the Architect/Designer. Installation to be done as per the manufacturers proprietary Specs

according the Design of the Architect/Designer. Shop Drawing of pattern and panel joints to be furnished by

contractor for approval of the Architect.

RIBBED WOODEN WALL PANELS

Providing and fixing of Acoustical wooden wall panelling consisting of base frame treated with anti-termite

chemical of factory make in color & formation as approved by Architect. Panels to be installed as per

specification. The Timber melamine effect acoustic wall panels made out of Fire Rated MDF core material. The

acoustic wall panels shall be in size of 128x2440x18mm (Thk). Wall slats to be Perforated having perforation to

4.83 NSR-21 25/30 mm diameter holes, at 32/35 mm c/c at the back face, and front of the panels to have cut with grooves of sqm 20 ₹ 6,317.00 ₹ 1,26,340.00

3mm at 16mm c/c.The back of timber melamine panels shall be laminated with Soundtex black acoustic tissue to

provide NRC not less than 0.6-0.7. The acoustic timber wall panels shall be with tongue and groove detailing along

the length of panels, with square edges on 2 sides along the width of panels. The wall panels shall be clipped into

aluminium channels and clips Keel and Fastener system at 600mm c.c. Density -800kg /m3, R.H 70, Fire Rated

Euro Class B and C formerly Class 0 and Class 1 BS476 part 6 and 7 respectively

5 SUB HEAD- V :- FLOORING WORK

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with

water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours

and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry

@3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut

with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of

required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Providing and fixing removable raised/false access flooring with system and its components of approved make

for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor

panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the

architectural drawings, as specified and as directed by Engineer-in-charge consisting of:

Digitally signed by AMIT

S.No DSR-2023 DESCRIPTION UNIT TOTAL Qty RATE

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness

minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm

at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded

stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking

and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor

(base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick

having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring

maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the

floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide

a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all

complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge.

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure

Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed

bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6

mm and bottom 0.70mm fused spot welded together (minimum 64 welds in Each dome and 20 welds along Each

flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and

bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming

compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp

technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to

withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the

panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL)

minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification

and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure

the quality of the product.

11.54.1 300 mm Finished Floor Height (FFH) sqm 15 ₹ 5,623.95 ₹ 84,359.25

Digitally signed by AMIT

S.No DSR-2023 DESCRIPTION UNIT TOTAL Qty RATE

ENGINEERED WOOD FLOORING:Providing and Fixing of Compct ENGINEERED WOODEN FLOORING Panel 12.5x145 x

1820 Total thickness 14 mm Numbers of panels per pack 6 Nested Lengths Max. 1 plank out of 6 m2 per pack 1,583

m2 Kg per pack 11,99 kg Toplayer PEFC controlled sources EN 13489 ± 3 mm Core board PEFC controlled sources

Spruce Backing layer PEFC controlled sources Wood Veneer 2 mm Tongue and groove Length Uniclic Width Uniclic

Multifit Domestic use Conditions in each pack 33 years Uniclic - Multifit connection Lifetime Commercial On request

"Wood for Life" Edge Protect + Provides a warranty on build-up of residue dirt along the edges due to maintenance

over the years 10 years "Wood for Life" Surface & Edge Protect + (lacquered products only) Provides a warranty on

4.3 MR pollution of surface structure and a warranty on build-up residue dirt along the edges due to maintenance over the sqm 80 ₹ 5,600.00 ₹ 4,48,000.00

years 10 years Surface layer Wood species Oak Origin Europe Finishing UV cured Oiled finish 2 layers UV cured

Lacquer Anti-scratch top coat 5 - 7 layers Natural variance Due to nature, visual surface can deviate from samples

Surface treatments cf catalogue/website Nature Marquant Vibrant General aspect of installed EN 13489 Lipping -

difference in height (mm) ≤ 0,20 difference in width (mm) ≤ 0,20 cupping lengthwise % ≤ 0,1 cupping in width % ≤ 0,2

Dimensional stability ISO 24339 Cupping short side max % ≤ 0,30 Changes 30 - 85 % RH Cupping short side min % ≥ -

0,20 Open joints short side (mm) ≤ 0,20 Open joints long side (mm) ≤ 0,30 Underfloor heating Suitable of special

installation instructions.or its equivalent as per direction of Engineer Incharge

6 SUB HEAD- VI :- ROOFING / FALSE CEILING WORK

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive)

as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and

37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long

with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts

& bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running

at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm

with tapered flanges of 26 mm Each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a

direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long

G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm

and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with

25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter

channel with the help of dry wall screws of size 3.5 x 25mm at 230 mm c/c, including jointing and finishing to a

flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes ,

finishing with jointing compound in 3layers covering upto 150 mm on both sides of joint and two coats of primer

suitable for board, all as per manufacturer's specification and also including the cost of making openings for light

fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per

drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS

certification marks)

Digitally signed by AMIT

S.No DSR-2023 DESCRIPTION UNIT TOTAL Qty RATE

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level,

suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm,

both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size

24x38mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size

24x25 mm made of 0.30mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to

center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of

0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600

mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including,

required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main

"T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with

12.5 mm dia and 50mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size

85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-

sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and

as directed by Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8

a 12.52.1 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically sqm 40 ₹ 1,902.95 ₹ 76,118.00

polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Providing and fixing 100mm x 100mm. decorative open cell ceiling system made of simple geometric construction featuring a

b MR slick 10mm. blade width. Installation to be done as per the manufacturers proprietary Specs according the Ceiling Design of sqm 15 ₹ 4,500.00 ₹ 67,500.00

Providing, fabricating, and fixing window canopies for protection against sun and rain, comprising MS framework made of

RHS/SHS sections, properly welded and fixed with anchor fasteners, finished with one coat of primer and two coats of

synthetic enamel paint, including UV-stabilized polycarbonate sheet (minimum 8 mm thick) fixed with aluminium channels,

EPDM gaskets, nuts, bolts, sealants, waterproofing at wall junctions, scaffolding, and all incidental works, complete in all

respects as per drawings and site conditions.

7 SUB HEAD-VII :- WATER PROOFING WORK

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C.,

kitchen and the like consisting of:

(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645

in recommended proportions including rounding off junction of vertical and horizontal surface.

7.1 22.3 (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in sqm 40 ₹ 769.60 ₹ 30,784.00

recommended proportion including rounding off junction of vertical and horizontal surface.

(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.

(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and

pasted to Each other with bitumen @ 1.7 kg/sqm).

8 SUB HEAD- VIII :- MILL WORKS & JOINERY

Digitally signed by AMIT

S.No DSR-2023 DESCRIPTION UNIT TOTAL Qty RATE

General Notes: Caracas:

Fabricating and fixing built up storage cupboards as per detail. All sides and Top, bottom along with shelves to be

made out of 19mm FR Ply as approved by the Architect. The storage Back to be formed of 25 mm thick FR Ply as

approved by the Architect. All internal and External surfaces to be faced with 1 mm thick laminate of approved

shade. Laminate to be pasted with High Quality fast setting Adhesive of Fevicol HIPER or equivalent Make, Cost to

include all necessary fittings like tension hinges, ball catchers, tower bolts, locks, handles, adjustable shelves etc.

as per directions of Architect. Shelves to

be provided as per Requirement and Drawings provided by the architect. Adjustable Shelves to be provided as per

the requirement and to be and to be supported on SS Brackets. All the door and other exposed edges shall be

Finished with the PVC Edge Banding of approved make and Colour with provision of finger grooves. Drawers

NSR shall be provided as per the requirement and Drawings of the Architect with Hettich /Hafele/Sugastone or

Equivalent Handles and Soft Closing Channel as approved by the Architect .

The storage to have all necessary hardware, locks, handle etc. complete as per detail. All provision of

fixing/hanging the Storage on the Wall shall be done and included in the quoted rates.

Storage to be complete with hardware installed as directed to consist of the following: Shutter to have automatic

spring loaded hinge of approved make installed strictly a per manufacturers guidelines with requisite too /jigs.

Each set of shutters /drawer to be provided with 1no. multi purpose lock as specified, SS Knob/ handles, auto

bolt, etc. or as specified by the Architect. Typical Depth Considered to be up to 450 mm Unless Specified by the

Architect. Sugastone/Hettich/Hafele Tension Hinges/Equivalent as approved to be included in the cost as per the

load bearing capacity for the shutters.

(For Calculation of Rates the Overall front elevation area shall be measured)

TYPICAL LAMINATED SHUTTER STORAGE

8.1 NSR Providing and fixing storage of depth up to 450 mm with Caracas and general Spec as 11.0 as approved by the sqm 10 ₹ 9,500.00 ₹ 95,000.00

Architect and faced with 1.00 mm thick laminate and PVC edge Banding as per the selection of the Architect.

TYPICAL OVER HEAD STORAGE LAMINATED

Providing and fixing storage. up to 1200 mm height and depth up to 400 mm with Caracas and general Spec as

G1.1 as approved by the Architect faced with 1.00 mm thick laminate and PVC edge Banding as per the selection

of the Architect.

8.3 NSR FULL HEIGHT OPEN SHELVE LAMINATED LIBRARY & AWARD STORAGE sqm 5 ₹ 15,000.00 ₹ 75,000.00

HIGH COUNTER BAR STYLE

Supply and installing counter as per the Design and Detail provided by the Architect. Formed on Existing Walls Or

Window along with Provision of landscape features and Foot Rest. Overall Depth of 500 mm and Height of 1050

Providing, supplying and fixing wash basin vanity cabinet made of BWP (Boiling Water Proof) plywood / PVC / WPC board,

finished with laminate / PU finish, including shutters, internal shelves, soft-close hinges, handles, all necessary hardware and

accessories, cut-outs for plumbing, complete in all respects as per approved design, drawings and direction of Engineer-in-

9 SUB HEAD- IX :- CURTAINS & BLINDS

Digitally signed by AMIT

S.No DSR-2023 DESCRIPTION UNIT TOTAL Qty RATE

Notes: As per the following or equivalent specifications based on the standard Manufacturers Product: Top Tube:

Made of extruded aluminium 38mm dia. with wall thickness of 1.2mm with spline adoptable to accommodate

clutch as manufacturer's approved make. Clutch Mechanism: Moulded plastic having antifriction additive with

high strength Glass fibre reinforcement polyester and should have a minimum lifting capacity of 8 lbs. Clutch

mechanism shall be crash proof, prevent slippage and shall raise and lower smoothly to any desired height.

Operating Chain: #10 plastic/steel ball chain (or as per manufacturer's standard) adoptable to the clutch pitch for

smooth, quiet lifting & lowering of blind.

Locking Member: #12 steel stop locks for limit setting adoptable to the steel chain or as per manufacturer's

standard. Bottom Bar /Weight: Aluminium extruded circular section with powder coated finish matching the roller

fabric -Min weight to be 365 gms / RMTS for a perfect fall of fabric to avoid warpage / floating. Installation to be

9.1 NSR - 39 insert type with end caps to give a neat look. Fabric shade: As approved sqm 20 ₹ 1,434.88 ₹ 28,697.60

Fabric: Openness factor/Light Transmission : As Approved

Fire rating of the fabric : Class - A, NFPA - 701 TM

Width : 180-250cm as per manufacturer standard

Dimensional stability: Warp: <1 Weft : <1

Colour fastness to Light.......ISO 105 B02 : 5/6

Shade Orientation: Regular roll, shade cloth fall at window side of roller.

Configuration: Single band

Providing and Fixing of Roller Blinds 5% Openness , Fabric Composition: Fabric Composition: 30% Polyester, 70%

Vinyl on Polyester

10 SUB HEAD-X: DESIGN AND DRAWING

Preparation of complete set of shop drawings including finishing, MEP services, details, design calcualtions etc. and any

10.1 MR other details as and when desired by Engineer In charge /client. A qualified professsional for the purpose shall be appointed LS 1 ₹ 49,912.40 ₹ 49,912.40

after due appproval from Engineer In Charge.

Total Civil Work ₹ 32,19,748.50

A Sanitary Fixture & CP Fittings

1 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low

level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend,

overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design

complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever

17.3.1 W.C. pan with ISI marked white soild plastic seat and lid Each 8 ₹ 8,006.60 ₹ 64,052.80

2 17.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm

and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass

spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and

making good the walls and floors wherever required :

Digitally signed by AMIT

S.No DSR-2023 DESCRIPTION UNIT TOTAL Qty RATE

17.4.1 One urinal basin with 5 litre white P.V.C. automatic flush­ing cistern Each 4 ₹ 6,285.75 ₹ 25,143.00

3 17.7A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved

quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-

(a) White Vitreous China Wash basin size 550x400 mm with a

15 mm CP Brass single hole basin mixer Each

4 17.70 Providing and fixing PTMT Bottle Trap for Wash basin and sink.

17.70.1 Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the

centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. 7 ₹ 367.10 ₹ 2,569.70

5 17.10 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless

steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required

6 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

17.28.2 Flexible pipe

7 17.31 Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6

mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers comelete. 8 ₹ 1,607.95 ₹ 12,863.60

8 18.21 Providing and fixing uplasticised PVC connection pipe with brass ions :

18.21.2 45 cm length

9 18.50 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing

not less than 810 gms.

10 18.53 Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS :

11 MR Providing, supplying and fixing urinal partition panels made of 12 mm thick compact laminate (phenolic board), fixed with SS-

304 brackets, clamps and fasteners, complete in all respects, as per approved design, drawings and direction of Engineer-in- 3 ₹ 8,000.00 ₹ 24,000.00

Providing, supplying & fixing compact laminate toilet cubicle / WC partition system complete with aluminium anodized

framework & SS-304 fittings — (12 mm Compact Laminate phenolic panels, adjustable legs, SS hinges, locks with indicator,

coat hooks, stop collars, U & F channels, screws, inserts & sealants), as per approved make and drawings. Each

Digitally signed by AMIT

S.No DSR-2023 DESCRIPTION UNIT TOTAL Qty RATE

16 N.S. Providing, fixing, testing and commissioning infra-red sensor controlled battery operated operated mixer with

suitable extension peice for wash basin comprising light sensing device and solenoid valve of approved make

including hot and cold water mixer unit, interconnecting control cabling between sensor & solenoid valve 5 ₹ 9,500.00 ₹ 47,500.00

including cutting and making good the walls and floors as required, all complete

17 N.S. Providing, fixing and commissioning hand drier with infra red controlled automatic on/off arrangement ( No

Touch) including cutting and making good the walls complete with all necessary fittings to make it operational as

required,of the following make and type:(or equal approved) - for handicapped toilet

18 N.S. Providing and fixing stainless steel finish toilet paper holder including cutting and making good the walls complete

of following make and type: (or equal approved) Each

19 Providing and fixing liquid automatic soap dispenser including cutting and making good the walls complete of

following make and type: (or equal approved) Each

20 Providing and fixing wall mounted auto aerosol dispenser with digital display fixed with brackets and rowl plug

complete in all respects Each

21 Providing and fixing stainless steel coat hooks including cutting and making good the walls complete of following

make and type: (or equal approved) Each

B Soil, Waste, Vent & Rain Water pipe

1 17.35 Providing and fixing soil, waste and vent pipes.

17.35.1.2 Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 Metre 30 ₹ 1,180.75 ₹ 35,422.50

17.35.2 75 mm diameter

17.35.2.2 Centrifugally cast (spun) iron socketed pipe as per IS: 3989 Metre 30 ₹ 1,186.00 ₹ 35,580.00

2 17.37 Providing and fixing M.S. holder bat clamps of approved design to sand cast iron/cast iron (spun) pipe embedded

in and including cement concrete blocks 10 x 10 x 10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20mm nominal size) including cost of cutting holes and making good the walls etc.

3 Minor Plumbing items LS 1 ₹ 20,000.00 ₹ 20,000.00

C Internal Water Supply

1 18.7 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water

supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per

direction of Engineer in Charge.

Digitally signed by AMIT

S.No DSR-2023 DESCRIPTION UNIT TOTAL Qty RATE

Internal work - Exposed on wall (For Water supply D/N in shaft & terrace & riser in terrace level)

18.7.1 15 mm nominal outer dia Pipes Metre 7 ₹ 286.80 ₹ 2,007.60

18.7.2 20 mm nominal outer dia Pipes Metre 15 ₹ 335.00 ₹ 5,025.00

18.7.3 25 mm nominal outer dia Pipes Metre 20 ₹ 401.55 ₹ 8,031.00

18.7.4 32 mm nominal outer dia Pipes Metre 5 ₹ 518.75 ₹ 2,593.75

18.7.5 40 mm nominal outer dia Pipes Metre 2 ₹ 702.95 ₹ 1,405.90

2 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water

supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per

direction of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.

18.8.1 15mm nominal outer dia pipes Metre 20 ₹ 497.80 ₹ 9,956.00

18.8.2 20mm nominal outer dia pipes Metre 10 ₹ 537.60 ₹ 5,376.00

3 18.18 Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete with hard chrome plated ball inside PTFE (Teflon) seat & ring with chrome

plated centre handle with female BSP threads complete:in all respects (PN 1.6). Tested to 25 kg/cm hyd.

4 N.S. Providing and fixing thermal insulation tubing for hot water pipes (exposed/chases/burried locations), over pipes

of following nominal bores and thickness including all required accessories, protection as per manufacturer's

recommendations, complete in al respect.

Concealed Piping in Toilet.

a) 15mm dia (6 mm thick insulation) Metre 8 ₹ 71.00 ₹ 568.00

b) 20mm dia (6 mm thick insulation) Metre 1 ₹ 125.00 ₹ 125.00

5 N.S Providing, fixing, testing & commisioning of cast iron slim type butterfly PN 1.6 valve complete corresponding

flanges, bolts, nuts 1.5 mm thick EPDM rubber gasket. (IS: 13095)

6 N.S Providing and fixing electric water storage heater (geyser) of following capacities including making inlet / outlet

connections, of approved makes.

a) Capacity : 15 litre Each 1 ₹ 7,900.00 ₹ 7,900.00

Capacity : 25 litre Each 3 ₹ 11,500.00 ₹ 34,500.00

Total Plumbing Work ₹ 7,96,348.45

Electrical Works

Digitally signed by AMIT

S.No DSR-2023 DESCRIPTION UNIT TOTAL Qty RATE

I SUB HEAD (I) :- INTERNAL WIRING

1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate,

suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc

2 1.55 Wiring for group controlled (looped) light point/ fan point/call bell point (without independent switch etc.) with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed PVC conduit, and earthing

the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

3 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess

1.21 including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed

conduit as required.

4 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including

connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 100 ₹ 156.00 ₹ 15,600.00

1.24.5 6 pin 15/16 amp socket outlet Each 40 ₹ 197.00 ₹ 7,880.00

5 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as

6 Supplying and fixing following size/module, GI box along with Modular base & cover plate on existing modular

metal boxes etc. as required.

V ERECTION OF LIGHTING FIXTURES AND FANS

7 1.50 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing,

commissioning etc. as required

Digitally signed by AMIT

S.No DSR-2023 DESCRIPTION UNIT TOTAL Qty RATE

Hot Dipped Galvanized Iron Cable Tray

8 DSR 4.6 Supplying and installing following size of perforated GI cable trays with perforation not more than 17.5%, in

convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts &

nuts, painting suspenders etc as required.

DSR 4.6.2 150 mm width x 50 mm depth x 1.6 mm thickness Metre 30 ₹ 716.00 ₹ 21,480.00

Total Electrical Works ₹ 2,33,500.00

4 LAN NETWORKING

Dismantling, removing, and safely stacking of existing electrical, data, and communication cables in the server room,

including all associated cable trays, conduits, supports, and accessories. After completion of the required work (e.g., raised

flooring installation), reinstallation and routing of the removed cables as per original or revised layout, including

termination, testing, labeling, and ensuring full functional connectivity. All work shall be carried out as per applicable

standards and manufacturer recommendations, making good all disturbed surfaces.

Total Lan Networking Works ₹ 1,50,000.00

5 SECTION 'A' : LOW SIDE HVAC WORKS FOR OFFICE SPACES

1 2.6 LINEAR SUPPLY AIR GRILLES WITH COLLAR DAMPER

Supply, Installation , Testing and Balancing of one way blow linear supply cum return air grilles complete with

fixed core as per approved shop drawings and specifications. The grilles shall be of approved colour &

Powder coated aluminium grilles of extruded sections with integral flanges on both sides & ends as required

complete with corner pieces.

2 2.6.1 LINEAR RETURN AIR GRILLES WITHOUT COLLAR DAMPER

Supply, Installation , Testing and Balancing of one way blow linear supply cum return air grilles complete with

fixed core as per approved shop drawings and specifications. The grilles shall be of approved colour &

Powder coated aluminium grilles of extruded sections with integral flanges on both sides & ends as required

complete with corner pieces.

Total HVAC Works ₹ 75,075.00

Digitally signed by AMIT

S.No DSR-2023 DESCRIPTION UNIT TOTAL Qty RATE

Sqaure shape Pendant luminaire Alcove with LED (Light Emitting Diode), system power 24W (6W Up,

18W Down), luminous flux of luminaire 2400lm , direct - indirect light emission, CRI>90, SDCM<3 , R9>50 ,

, THD<10% colour temperature of 4000K, Neutral white, 230V constant current driver, 70% of luminous

flux after 50,000 operating hours, energy-efficient LEDs, luminaire profile in aluminium, Polyester powder

Black / white / grey coloured coat applied over a 5- stage pre-treatment,high-efficiency glare-free deep

1 MR recessed snap-fit micro-prismatic diffuser for homogeneous light distribution, UGR <19 , ZHLS (Zero Nos. 20 ₹ 6,690.00 ₹ 1,33,800.00

Halogen Low Smoke) internal wiring, Electronic control gear, adjustable suspender

Protection class I, IP 20

L = 1148mm X 1148 mm X 1148mm X 1148mm, B = 75 mm, H = 90 mm, PL (max) = 1500 mm. (Square

Recessed downlight Blair with HPE (High-Performance Efficiency) with LED (Light Emitting Diode),

system power: 15 W, Luminous flux of luminaire 1500 lm, Colour temperature 4000K,CRI > 90,SDCM<3 ,

R9>50 , THD <10% 230 V constant current driver, 70% of luminous flux after 50,000 operating hours;

energy-efficient LEDs, direct light emission, housing in die-cast aluminium, Polyester powder white

2 MR coloured coat applied over a 5-stage pre-treatment trim, prismatic diffuser for homogenous light Nos. 15 ₹ 2,250.00 ₹ 33,750.00

distribution, ZHLS (ZERO HALOGEN LOW SMOKE) wiring, electronic control gear,

Protection class II, IP 40,

Total Lightning Work ₹ 1,67,550.00

1 Café table for Mini cafe area

Supplying, and placing in position of cafe table as per image/drawing. Table top made out of 25mm thk

prelaminated particle board with 2mm thk pvc edge banding with ms powder coated "C" shape legsof size 50 x

50mm. Comprising of metal powder coated cross connectors of size 40mm X 40mm. The working edges shall be

MR provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The

product should be from the manufacture which have BIFMA Compliance Certification, GREENPRO/FSC

Certification,AIOTA Certification. The product should be as per above given specification under the guidance of

project architect & Engineer in charge.

2 Café Chair for Mini café area nos 40 ₹ 3,460.00 ₹ 1,38,400.00

Digitally signed by AMIT

S.No DSR-2023 DESCRIPTION UNIT TOTAL Qty RATE

Supplying, and placing in position of cafe chair as per image. size: (l)381mm x (d)419mm x (h)839mm.The seat

and back in pvc moulded chair with ss 202 grade frame round pipe. The chair comes in various colours - green,

MR black, red,yellow, blue, brown, orange, white. The product should be from the manufacture which have BIFMA

Compliance Certification, GREENPRO/FSC Certification,AIOTA Certification. The product should be as per above

given specification under the guidance of project architect & Engineer in charge.

3 Sofa For Chairperson

1 Seater Sofa in size of 1000 mm W x 1000 mm D x 880 mm H. The structure of the sofa shall be made up of solid

wood finished with melamine and the wood shall be extended upto the arms & visible outside the armrest padding. The

foam used in making this sofa shall be of density 32 and 40. Roll poly filling should be used with this pu foam for giving

extra comfort and softness to sofa. high quality nevar belts & good quality stapler pins to be used. The legs shall be

made up of wood with melamine finish. The seat & back shall be upholstered with high quality leatherite. The OEM shall

have ISO 9001, ISO 14001, BIFMA Level-2 and GreenGuard Certification.

Total Furniture Work ₹ 3,51,131.45

Digitally signed by AMIT