Constrn store shed two wheeler parkingshed pumproom electrification at Chekkanurani 230KV SS

Amount

Earth work excavation for foundation in hard stiff clay, stiff black cotton hard red earth, shales, muram, gravel, stoney earth and earth mixed with small size boulders with an initial lead, lift, etc, complete.

Earthwork excavation in soft disintegrated rock laterite soft rock or kankar not requring blasting, etc, complete

Earthwork excavation in medium rock and dense medium rock requiring blasting.

Removing hard rock by wedging, chisselling and trimming to proper shape where blasting is prohibited

Supplying and filling of river sand in foundation and basement with well water and consolidation as per specn incliding cost of all materials labour, lead, lift, etc., complete.

PCC 1:4:8 mix using 40mm HBS machine crushed metal for foundation concrete with out formwork including cost of all labour, materials, lead, lift, curing, etc., complete.

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for raft foundation without formwork including cost of all materials, labour lead, litf, etc., complete.

RCC 1: 1.5:3 using 12-20mm HBS metal (machine crushed) metal for Column concrete up to Roof level with centering shuttering form work including cost of all material, labour lead, lift, etc, complete, but excluding cost of steel reinforcement

RCC 1: 1.5:3 using 12-20mm HBS metal (machine crushed) metal for Grade beam with centering shuttering including cost of all material, labour lead, lift, etc, complete, but excluding cost of steel reinforcement

Refilling with excavated earth other than sand in foundation and sides of masonry, consolidation as per std. specn. with water including all, labour, lead , lift, etc., complete.

RCC. 1:1 1/2:3 mix using 12 mm to 20mm HBS metal(machine crushed) for plinth beam with formwork including cost of all labour, materials, lead, lift, etc, complete. But excliding cost fo steel reinforcement (by using mixer machine).

Brickwork in CM 1:5 mix using II class champer bricks of size 9"x 4 3/8"x2"3/4" for super structure including cost of all materials, labour, lead, lift, curing, etc., complete. Basement

Brickwork in CM 1:5 mix using II class champer bricks of size 9"x 4 3/8"x2"3/4" for super structure including cost of all materials, labour, lead, lift, curing, etc., complete. Super structure

RCC 1:1 1/2:3 mix using 12 to 20mm HBS metal (machine crushed) for contineous lintel, tier slab and bed block, cover slab for staircase slab, water tank slab with formwork including cost of all materials, lead, lift, etc., complete.(by using mixer machine).

RCC 1:1 1/2:3 mix using 12 to 20mm hbs metal (machine crushed) for Sun shade 60cm. Projection 80 mm thick at wall end and 50 mm thick at free end and loft, with form work including cost of all materials, labour, leas, lift, etc., complete. (by using mixer machine).

Flooring with PCC 1:3:6 mix using 20mm HBS (machine crushed ) metal for flooring 150mm thick including cost of all materials labour lead, lift, etc., complete.

PCC 1:2:4 mix using 12 to20mm HBS (machine crushed ) metal for flooring concrete including cost of all materials labour lead, lift, etc., complete.

Labour charges for floor finishing with mechine finishing including cost of all materials labour lead, lift, etc., complete.

Plastering with CM.1:5 mix using 12mm thick for inside & outside walls, including cost of all materials, labour, lead, litf, etc, complete.

Plastering with CM. 1:3 mix 12mm thick for fol, bath, RCC pillars, sunshade, loft, etc., including cost of materials, labour, lead, lift, watering, curing, etc., complete.

Providing projected border of 20cm. width for plinth beam in CM. 1:3 20mm thick including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Colour washing two coats with Exterior Emulsion paint (weather shield) over one coat of Emulsion primer for outside wall including cost of all materials, labour, lead, lift, etc., complete.

Colour washing two coats with interior Emulsion paint over one coat of Emulsion primer for inside wall including neceessary wall putty two coats, cost of all materials, labour, lead, lift, etc., complete.

Engraving the month and year of construction in the plinth beam projected border as per drawing and as per the instructions of site engineer (granite stone of size 300 x 200 mm)

Providing antitermite treatment in 4 stages i)immediately after EWE and before laying of foundation conc. ii) after refilling for sides of foundation iii) before laying of flooring conc. & outside of basement upto1 m alround the building using termit 250ml for 5 liters of water

M&F of steel door using 40x40x6 mm for outer frame 25x25x6mm for shutter frame with msflat 25x6mm 3 nos for panels with 12mm thick twoside laminated MDF duratuff exterior quality with bolts, bitumin washers, hinges locking etc., including cost of all materials labour lead lifts etc complete. Steel door (double leaf) as per drawing Size 1.00 x 2.00m

M&F in position of steel ornamantal windows partailly glazed using MS angle 35x35x5mm and 35x5mm "T" angle for frame & 25x25x3mm for shutter frame with 3mm thick pin top glass & oneside laminated exterior MDF duratuff board for bottom, ornamental MS grill, with hook, locking cost of materials etc., complete. As per drawing steel window of size 1.35 x 1.10m (3 leaves 6 shutters)

Supplying and filling Red gravel in the basement and stacking them to departmental gauge, labour for filling and compaction including cost of all materials lead lift labour etc complete

Supplying and erection of 1 1/4" (32mm) outer dia 25mm inner dia PVC Pipe 10 kg / sq.cm Suction and delivery including cost of pipe confirming for IS 4985/1968 and 4984/1978 including bend labour for cutting threading fixing and tightening necessary excavation etc., complete.

Supplying and fixing in position of 25mm dia pvc pipe of 10 kg/sq.cm pressure from the approved manufacturer appolo, chemplast, avanplast, valamarthi, usha, vimal etc., confirming to IS 4985 of 1968, 4984 of 1970 including cost of all special fixtures labour lead, lift, etc., complete.

Supplying and fixing of 15mm high quality brass screw down bib cock such as leader, zeolite and zenith of any other approved quality cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete. 25 mm dia GM Gate valve / Ball valve

Removing the excess earth to the nearby bund or low laying area instructed by field engineer including all lead, lift, labour etc., complete.

Wiring with 2x1.50 Sq.mm PVC unsheathed copper multistand cable of 1100 V grade in suitable pvc rigid pipe in wall or ceiling with pvc accessories with TW switch box in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with contineous earthwire connection of 14 SWG TC wire for light and Fan points (SD 23)

Supply and run of 2x1.5 sq.mm (22/0.3) PVC insulated Multistrand unsheathed copper conductor of 1100 V grade. (SD 67)

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point.(SD38)

Supply and fixing of 20 W LED lamp fitting 'INDURA' complete with supension pipe fom the ceiling or wall with PVC unsheathed copper leads from the terminals to the fitting with LED lamp with approved make ( Philips / crompton)

Wiring with 2x4 sq.mm Pvc unsheathed copper multistand cable of 1100 V grade in suitable pvc rigid pipe in wall or ceiling with pvc accessories with 150mm x 100mm x 75mm T.W switch box in flush with wall covered with 3mm tk. Hylum sheet for 15 amps 3pin flush type non interlocking C.S plug including pin top with painting of suitable colour with contineous earthwire connection of 14 SWG T.C. wire for plug point. (SD 13)

Earthing as per standard specification complete with necessary masonry work. Sd(221)

Supplying and fixing of 23 cm angular holder with EI fancy shade glass with 8 W LED bulb. (sd 81)

Supplying and fixing of water tight Bulk head fitting with guard (philips, bajaj, k-lite, cromption greaves) suitable for incondescent lamp with guard and 8W LED bulb.

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make). (SD 173)

Supplying and fixing of RCCB safe trip of appd LEGRAND, ISI make, 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification.

Fabrication supply and erection of roofing trusses as per standard specification and as directed by the Engineer at site using pre painted with anticorrsive paint Coloumn post ISMB 200x100 with base plate, for truss 60.30 medium pipe 3.65mm thick for top & bottom, 33.7 heavy pipe 4.05mm thick for cross bracing and Roof purline 100 x 50mm including cost of all materials labour lead lifts & painting two coats etc complete.

Supply and Fixing in position of colour coated roofing sheets with lining enamel with standard thickness 0.50mm and required sizes over the fabricated and erected truss with the provision of hook arrangements, including cost of all materials, transporting, labour charges, welding charges, cutting charges, drilling holes with provision of GI bolt, nut and washers of required sizes for holding sheet all leads and lifts etc., complete and placing in position as per the specification and drawings and as directed by Engineer.

Supplying and fixing godrej 6 leaver lock including cost of material, labour lead, lift, etc, complete

Dismantaling clearing away the brick work materials from the work site to out side the SS area including transporting chargse, all labour lead lifts etc complete.

Dismantaling clearing away the Stone masonry work materials from the work site to out side the SS area including excavation and refilling charges, transporting chargse, all labour lead lifts etc complete.

Dismantaling clearing away the Door and window from the work site and devoluted to the store including transporting chargse, all labour lead lifts etc complete.

Dismantaling clearing away the RCC plinth beam concrete materials from the work site to out side the SS area and scrab MS/RTS rod devolutd to the store including transporting chargse, all labour lead lifts etc complete.

Dismantaling clearing away the RCC lintal and sun shade and Roof concrete materials from the work site to out side the SS area and scrab MS/RTS rod devolutd to the store including transporting chargse, all labour lead lifts etc complete.

SGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

J.S.NAGARAJAN

S.RADHAKRISHNAN

J SETHURAMALINGAM

ALAGAPPA CONSTRUCTIONS

Murugan

HARISH CONSTRUCTION