ADDN/ALTN TO BLDG NO P - 162 AT PRATAP ENCLAVE AT JAIPUR MIL STN UNDER GE (SOUTH) JAIPUR

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 m depth and getting out in soft /loose soil etc complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L Brick work using old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removal all rubbish material outside of MD Land complete all as specified and directed.

Use and waste form work to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof and sides of bands in walls, horizontal or sloping and similar work for rough finished concrete surface exc 10 cm but not exc 20 cm wide complete all as specified and directed.

Use and waste form work to sides and soffits of floor or roof beam, beam hauchings, girders, bressummers, lintels, cantilevers, shelves, for flat rough finished concrete surfaces complete all as specified and directed.

Use and waste form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams etc and similar work, vertical or to batter for rough finished flat concrete surfaces complete all as specified and directed.

Use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) for rough finished flat surface of concrete complete all as specified and directed

Use and waste form work to sides of pillars, posts, struts, piers, columns and stanchions for square, rectangular or polygonal rough finished concrete surface complete all as specified and directed

M&L for RCC (design mix) M-25 using 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed . Note - Reinforcement and form work shall be measured and paid separately.

M&L for RCC (design mix) M-25 using 20 mm graded stone aggregates as in columns, pillars, piers, posts and struts and similar work complete all as specified and directed. Note - Reinforcement and form work shall be measured and paid separately.

M&L for RCC (design mix) M-25 using 20 mm graded stone aggregates as in beam, cantilevers, bressummers, lintels over 1.5 m span and similar work complete all as specified and directed. Note - Reinforcement and form work shall be measured and paid separately.

M&L for RCC (design mix) M-25 using 20 mm graded stone aggregates as in slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work complete all as specified and directed. Note - Reinforcement and form work shall be measured and paid separately.

M&L for rendering 15mm thick on other than fair face of brick works in CM 1:6 and finished even and smooth complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15 mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and directed

M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface and finished even and smooth with out using extra cement complete all as specified and directed .

Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil etc complete all as specified and directed.

Removal of excavated materials (soils) not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed.

M&L for Mild Steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild Steel TMT bar 5 mm dia and over up to and including 10 mm dia as in stirrups, spacers & binders cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed.

S&F 4 mm thick plain sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolts of extruded section 200 mm long complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel 100 mm long complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated type anodised of 150 mm size complete all as specified and directed.

M&L for 75 mm thick Cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed.

M&L for non skid joint free ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 600 x 300 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior acrylic emulsion paint by mechanical means over a coat of primer and over 1 mm thick wall care putty complete all as specified and directed. Note : The surface should be even and smooth after applying the wall care putty as per direction of Engr-in-Charge.

M&L for preparing newly plastered surfaces and applying two coats of distemper oil emulsion white or tinted by mechanical means over a coat of primer over a coat of 1mm thick wall care putty to make smooth the undulated surfaces complete all as specified and directed. Note : The surface should be even and smooth after applying the wall care putty irrespective of number of coating applied and as per direction of Engr in charge/GE

M&L for preparation of newly plastered surfaces of ceilings and applying two coats of distemper oil emulsion white or tinted by mechanical means over a coat of primer over a coat of 1mm thick wall care putty to make smooth the undulated surfaces complete all as specified and directed. Note : The surface should be even and smooth after applying the wall care putty as per direction of Engr-in-Charge.

M&L for preparation of old plastered surfaces of ceilings and applying two coats of distemper oil emulsion white or tinted by mechanical means over a coat of primer over a coat of 1mm thick wall care putty to make smooth the undulated surfaces complete all as specified and directed. Note : The surface should be even and smooth after applying the wall care putty as per direction of Engr-in-Charge.

M&L for preparing old plastered surfaces and applying two coats of distemper oil emulsion white or tinted by mechanical means over a coat of primer over a coat of 1mm thick wall care putty to make smooth the undulated surfaces complete all as specified and directed. Note : The surface should be even and smooth after applying the wall care putty as per direction of Engr-in-Charge.

S&F 8mm thick glass partition including CP fixing accessories all as specified and directed. Make : Jaquar / Grohe / Kohler.

Supply and fixed vitreous china wash hand basin with Modular BWR Plywood Vanity Washbasin Cabinet (45cmx60cmx83cm) including 32mm dia brass chromium plated waste coupling and fixing of CP bottle trap and mirror with LED arrangements incl all accessories complete all as specified and directed. Make of wash basin : Jaquar / Kohler / Grohe. Note. CP bottle trap shall be measured and paid seperately as supply only.

Supply only brass CP bottle trap 32mm complete all as specified and directed. Make : Kohler / Grohe / Jaguar.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal complete all as specified and directed

Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Taking up or down 25 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.

S&F 25 mm bore steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.

S&F GI tubes medium grade with all fittings fixed to walls and ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade with all fittings fixed to walls and ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed.

S&F bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fancy type chromium plated of 15 mm bore dia of pipe complete all as specified and directed.

S&F bib taps 15mm bore 2-in-1 cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.

S&F WHB mixer 15mm bore swan neck cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.

S&F Single Piece-WC with soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, including P/S trap complete all as specified and directed.Make : Jaquar / Kohler / Grohe.

S&F brass CP health faucet 1.2m chain complete all as specified and directed.

S&F brass CP toilet paper holder with flap complete all as specified and directed.

S&F 600 mm long brass CP towel rack made by square/round pipes complete all as specified and directed.

S&F CP hand shower with 1.25m long flexible chain and holding stand including accessories complete all as specified and directed.

S&F 5-6 inches overhead Brass chromium plated shower rose incl shower arm of 24 inches with 15mm bore with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S & F 15 mm dia Angle/stop valve, cast copper alloy chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as specified and directed.

S & F PTMT alloy bathroom cabinet with mirror of overall size 300 x 450mm complete all as specified and directed.

M&L 15 mm thick Granite work (table rubbed & polished) in cooking plat forms,window cill & edges, steps, jamps, pillars and like in single piece in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S & F kitchen sinks made of stainless steel sheet 1mm thick of grade SS-304 incl washer, brass sink coupling, waste pipe, bowl size 495 x 420 x160 mm fixed in kitchen granite top incl cutting granite/ marble of cooking platform complete all as specified and directed.

S&F vitrous china squatting pan of size 580 x 440 mm (Orrisa pattern), white with integral foot rest (excluding flushing cistern & flush pipe) including anti-syphonage pipe complete all as specified and directed.

S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed .

S&F SS towel ring square including Chromium plated brass screws & plastic rawl plug complete all as specified and directed.

S & F 15mm bore Wall Mixer with Provision For Overhead Shower and hand shower, Connecting Legs & Wall Flanges ,screwed the ends for iron pipe and plugging complete all as specified and directed.

S&F Soap dish, stainless steel of good quality complete all as specified and directed.

M&L for SGSW gully trap 150 x 150 mm square or round mouthed type 'P' complete all as specified and directed.

M&L Broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40 mm graded stone aggregate, 75 mm thick in plinth protection laid in panels and finished even and fair including necessary form work complete all as specified and directed. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in quoted rate for concrete in plinth protection.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

M&L PVC (SWR) floor trap of diameter of outlet 75 mm, plain with grating including jointing with solvent cement complete all as specified and directed

S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

M&L for fibre reinforced, UV resistant elastomeric liquid applied water proofing coating over cementitious surfaces, highly elastic and hairline crack bridging capacity (elongation 250-350%), non toxic, VOC compliant water based coated in three layers, first being priming coat, forming complete thickness as mentioned by OEM complete all as specified and directed. Make : Asian / Berger / Sika.

S&F Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm bore dia of pipe complete all as specified and directed.

S&F steel windows factory made of MS hollow section 79mmx39mmx1.6mm thick frame with double shutter welding and tennon riveting dobby hinges shall be provided to both shutters, Locking arrangements as per sample approval by GE provided with knob, 10mm MS square bars in grill, Z section handle 100mm size and 150mm long hook welded to frame and shutter, four Nos lugs welded to frame including necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fast and making good in PCC 1:2:4 type B-0 complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured & paid separately under respective items.

M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed

S&F PVC (SWR) 50mm bore pipe single socketed in any length with rubber ring joints fix to wall complete all as specified and directed.

Taking down existing water proofing roof treatment of any description complete all as specified and directed.

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0,( 1.2.4) using 12.5 mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope with and including WPC @ 3% weight of cement complete all as specified and directed.

M&L rendering 10mm thick in cement mortar (1:3) on concrete surfaces to receive water proofing treatment finished even and smooth complete all as specified and directed.

M & L for Terrazzo tiles 20cm x 20cm x 20mm thick, with size of chips upto 12 mm; set,with grey cement and pigment jointed and pointed in neat cement slurry in floors, and cut and polished including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Taking down cement plaster any description, on brick or stone walls, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish outside MoD land complete all as specified and directed.

Dismantling of cement concrete tiles,glazed tiles, terrazo tiles in floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish outside MoD land complete all as specified and directed.

Dismantling of 75mm bore PVC soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed

Dismantling of 110mm bore PVC soil/ waste pipe alongwith fittings and accessories jointed in cement mortar and taking out from walls, floors or from trenches, if required complete all as specified and directed

S&F in repair 500 litres, rotational moulded polyethylene three layered water storage tank (Cylindrical vertical with closed top), hoisted and fixed in position including 20mm bore ball brass and making connection complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

S & F 35mm thick flush shutters solid core construction with block board and plywood face panels commercial type on both side complete all as specified and directed.

M&L for decorative laminate type 1, 0.9mm thick of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionas in door shutters complete all as specified and directed.

S & F 35mm thick second class hardwood glazed and skeleton door shutters open rebated and prepared to receive glass/gauge etc divided into square , with plain, chamfered or rounded, mitred and rebated sash bars any numbers , fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 complete all as specified and directed. Note :- S&F Glass/gauge shall be measured and paid for separately.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed to wodden door shutters complete all as specified and directed.

S&F aluminium anodised sliding door bolt 250mm long with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolt of extruded section complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set jointed & pointed in neat cement slurry in floors with grey cement & pigment over and including 20mm thick screed bed in cm 1:6 complete all as specified and directed.

S & F 15 mm dia stop cock ( concealed type) , cast copper alloy chromium plated , fancy type screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as specified and directed.

S &F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings;sheds, door frame ,framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in concealed PVC conduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box for mounting fitting like switches, sockets fan regulators modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor FRLS cable 1100 V grade as continuous earth wire and connected to earth dolly for followings complete all as specified and directed.

One light/fan/ bell point controlled by one, one way switch complete all as specified and directed.

One 3 pin 5 Amp socket outlet on same board with other switches complete all as specified and directed.

One 3 pin 5 Amp socket outlet on independent board with other switches complete all as specified and directed.

All as per Item No 100 above but with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 4 Sqmm copper cable continuous earth wire and connecting to common earth dolly.

S&F for Modular switch 1 way 6A 230 Volt 1 module

S&F for Modular switch 1 way 16A 230 Volt 1 module

S&F for Modular Socket 06 Amp 2/3 pin combined 2 Module AC 230 volt.

S&F for Modular Socket 16 Amp 2/3 pin combined 2 Module AC 230 volt.

M&L for ceiling rose surface bakelite 65x50mm, three terminals complete all as specified and directed.

Supply & fix Exhaust fan steel body AC single phase 230 V of size 300mm sweep heavy duty with blades and frame and louvers complete all as specified and directed

Supply & fix LED retrofit lamp ( size-4 feet), 18 watt Regal Batten for LED tube, universal batten for T5 lamps surface/wall mounting IP 20 with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply & fixing Mirror surface mounted LED fitting 14 W (2 Feet)provided with a high output PMMA diffuser for glare free light , IP 20 with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F in repair factory made, sheet metal distribution boards, SPN 12 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, having minimum 200 amps, copper bus bar complete all as specified and directed.

S&Fin repair MCB 10 KA rupturing capacity of the under mentioned type and rating complete all as specified and directed :-

SP 5 to 32 amps

SPN 40 amps.

M&L for sub main wiring complete with 2 runs of 6 Sqmm single core FRLS PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn through and including PVC rigid conduit not less than 25 mm dia and conduit accessories fixed on surface of wall / celing etc including provision of 1 run of 6 sqmm FRLS PVC insulated unsheathed cable with multistranded copper conductor as earth continuity complete all as specified and directed. Note : 2 run of 6 sqmm + 01 Run of 6 sqmm earth wire and 1 RM conduit will be measured as one unit.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 meter below normal ground level , connected to and including galvanised earth strip 25 X 4 mm by means of galvanised iron bolts , nut and washers and connected to other end to main panel board duly protected by galvanised iron pipe 32 mm dia " light grade " earth plate surrounded by packed layer of coal dust and common salt 15 cm thick all around bottom and top watering pipe 20 mm bore of galvanised iron " medium grade " with funnel all as shown on electrical plate No 3 of SSR part -I and connecting to earthing testing on completion including cast iron cover frame and PCC 1:3:6 type C-1 using 20 mm grade stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc complete all as specified and directed. Note : PCC Chammer shall be constructed atleast 1.5 meter away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner).

Supply and fixing of single pole and neutral enclosure with a two pin and a earth plug and socket complete with one single pole MCB of 20 Amps 240 volt complete all as specified and directed.

Supply and fixing of electric weater heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre BEE 5 Star rate complete with all accessories such as safety valve thermostat NRV connection pipe etc complete all as specified and directed.

MSR INFRATECH (BID ID -3137393)

M/S ROHIT CONSTRUCTION (BID ID -3137040)

Chaudhary Constructions (BID ID -3137403)

M/S Anil Enterprises (BID ID -3137568)

UNIVERSAL INFRAPROJECT PVT LTD (BID ID -3133518)