176/2025-26

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50mtr lead

Dismantling roofs with care including stacking of serviceable material and disposal of unserviceable material with in 50 Mtr. lead for :Lime terrace.

Dismantling of flooring with care including stacking of serviceble material and disposal of unserviceble material with in 50 mtsfor cement concrete flooring

Taking out doors, windows and clearstory windows shutters (steel or wood) including stacking within 50 meter lead Of area 3 Square meter and below.

Of area exceeding 3 square meter.

Removing mortar from stones and cleaning stones and concrete articles including stacking (net quantity of stacks of cleaned materials will be measured).In Lime mortar.

Removal and refixing stone chhajja 50 to 75 mm thick including finishing, complete in all respects.

Repair to stone masonary in cement sand mortar 1:6 with old and new stone.20 mm thick

Random Rubble stone masonary for superstructure above plinth level one storey height above 30 Cm. thick walls in :Cement Mortar 1:6 (1-Cement:6-Sand).

Plaster on new surface on waill in cement sand mortar 1:4 including raking of joints etc complete fine finish 20mm thick

Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

Providing and laying in position cement concrete including curing compaction etc. complete in specified grade excluding the cost of centering and shuttering- All work up to plinth level 1:4:8 (1 Cement: 4 Coarse Sand: 8 graded stone aggregate 40mm nominal size crusher broken)

Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150 mm distance.

Providing and fixing Square bars or other flat welded to window, ventilators etc

Providing and fixing G.I. sheet single leaf door shutter in angle iron frame 35 x 35 x 5mm suitability diagonally braced with 25 x 3mm flat iron above and below lock rail of size 50 x 5mm beading extra including all fittings as per direction of Engg. Incharge but excluding cost of chowkhats including two coat of anit-corrasite red oxide primer paint G.I. Sheet 20 S.W.G.

Add extra for Double leaf Shutter 20%

Cement concrete flooring grade 1:2:4(1-Cement: 2 Course sand: 4-graded stone agg.) rounding off edges etc. but excluding the cost of steps etc. Compete IS 2571-1970. 50mm thick with 20mm thick nominal size agg.

Add extra if finished with a floating coat of neat cement including cement slurry making of lines or grooves etc. complete.

Pointing on stone masonary in cement sand mortar 1:3 (1-Cement:3-Sand) :

Flush or ruled pointing.

White washing with lime to give an even shade including all scaffolding For new work three or more coat

.Distempering with dry distemper of approved brand and manufacture shade on old work to give an even shade including all scaffolding and scrapping and necessary repairs complete.Colour Change

Finishing walls with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding (New work – Three or more coats)

Applying priming coat with ready mix zink chromate yellow primer of approved brand & manufacture on steel galvanized iron steel wire

Painting with ready mix paint of approved brand and manufacture in all shades to give an even shades new steel work (three or more coats)

P&F squatting Pan (Indian type) white glazed vitreous china 1st quality W.C. Pan (IS: 2556 Mark) with 100mm vitreous china P or S trap including cutting and making good the wall and floor (excluding the pair of foot rest.) size 510mm

P& F WVC foot rest (IS 2556 mark) including cutting & making good the floor Size 250X 130X 30 mm

P&F WVC wash basin (1st quality, IS: 2556 Mark) of approved make with C.I. brackets duly painted, 1 No. 15mm C.P. pillar cock (IS: 8934 Mark) & 32mm C.P. brass waste coupling of approved make, 25mm G.I. waste pipe complete including cutting & making the wall size 510mm x 440mm

Providing laying and jointing glazed S.W. pipes grade ‘A’ (IS: 651 marked) of approved make with spun yarn and stiff mixture of cement mortar 1:1 excavation and refilling of earth in all types of soil up to 1.2 m depth, S.W. fitting, including testing of joints etc. complete 150 mm dia

Construction of soakage well in all type of soil 300mm thick dry masonry, top & bottom 300mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40mm thick M-15 grade C.C. flooring, earth work complete as per approved drawing including disposal of earth within a lead of 50 meter: 300 CM dai outside & 300 Cm depth

Construction of manhole in all type of soil inner size 90x60 CM thick masonry in CM 1:6, 10 CM thick cement concrete 1:5 10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels. 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, 25 Kg. CI cover with frame of 450mm dia, earth work etc complete as per design including disposal of surplus earth within 50 M lead. Depth up to 0.5 M

P&F PVC storage tank (IS: 12701 marked indicating the BIS license no.), of approved make with cover, 25mm dia 1 M long G.I. over-flow pipe & 25 Cm long wash out pipe with plug & socket, including making connection etc. complete of approved design 1000 litres capacity

P&F G.I. pipes (Internal work) with G.I. fittings (IS: 1239 Mark) & MS clamps including cutting and making good the walls and floors: 15mm dia nominal bore ‘B’ type

P&F G.I. pipes (Internal work) with G.I. fittings (IS: 1239 Mark) & MS clamps including cutting and making good the walls and floors: 25mm dia nominal bore ‘B’ type

P&F G.I. pipes (External Work) with G.I. fittings (IS: 1239 Mark) including trenching & refilling earth etc) 15mm dia nominal bore ‘B’ Class

P&F Pillar cocks (IS: 8934 Mark) of superior quality and approved make: C.P. Pillar Cocks, 15mm dia nominal bore

P&F stop cock (IS: 8931 Mark) superior quality & of approved make): C.P. brass 15mm nominal bore

P&F Flush Cock/ Flush Valve (IS: 9758 Mark) for WC of approved quality make Half turn exposed 25mm nominal bore

P&F Full way Valve (IS: 778 Mark) or wheel valve of approved make: Gun metal 15mm nominal size

P&F Full way Valve (IS: 778 Mark) or wheel valve of approved make: 20mm nominal size

P & L C.C 1:5:10 (Stone aggregate 40mm nominal size) all round S.W. pipe including 15 cm thick bed concrete as per Rajasthan P.W.D. specification: (Width W= Diameter of pipe in Cm + 40 Cm) (Excluding cost of pipe) 100mm dia S.W. Pipe

Wiring of light point / fan point / exhaust fan point / call bell point with 1.5 sq. mm. nominal size FR PVC insulated unsheathed 1.1kV grade flexible copper conductor and 1.5 sq. mm nominal size FR PVC insulated copper earth conductor (IS:694) of approved make in double lock/ ISI marked single lock pvc casing capping & it's accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & falce ceiling point, 6 A switch 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers , making connections, testing etc. as required.

Short point (up to 3 mtr.)

Medium point (up to 6 mtr.)

Long point (up to 10 mtr..)

Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed 1.1 kV grade flexible copper conductor and 1.5 sq.mm nominal size FR PVC insulated unsheathed 1.1 kV grade copper earth conductor (IS:694) of approved make double lock/ ISI marked single lock pvc casing capping & it's accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & falce ceiling point, 6 A switch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.

On board

Short point (up to 3 mtr.)

Medium point (up to 6 mtr.)

Long point (up to 10 mtr..)

P&F following size double lock / ISI marked single lock PVC casing capping & it's accessories like coupler, inner, outer, elbow , square box, tee etc. with screws, PVC expansion fasteners as required.

20 mm x 12 mm

25 mm x 12 mm

Wiring of light point / fan point / exhaust fan point/ call bell point with 1.5 sq. mm nominal size PVC insulated stranded/ solid aluminium conductor 1.1 kV grade and 2.5 sq.mm nominal size PVC insulated aluminium earth conductor (IS:694) of approved make double lock/ ISI marked single lock pvc casing capping & it's accessories, 18 swg M.S.box with earth terminal, 6 A switch, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.

Short point (up to 3 mtr.)

Medium point (up to 6 mtr.)

P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.

Single pole MCB

6 A to 32 A rating

Pipe Earthing as per IS:3043 with perforated 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300 mm and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance as required.

P & F of M.S. J- hook of standard design made out of 16 mm dia. M.S. round bar and fixed with cement concrete mortar with required support as required.

P & F double ball bearing capacitor start ceiling fan of approved make complete with regulator and other accessories as required. (for estimation purpose only)

900 mm sweep Orient make

P & F surface/recessed type 10 mm thick Teak wood board duly antitermite treated, varnished and fixed by using gutties/ PVC fasteners of following size as required.

150 mm x 75 mm

100 mm x 100 mm

100 mm x 175 mm

200 mm x 250 mm