Jambai TP General Fund

Amount

REarth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc. complete. complying with std. specifications.TNDSS NO 20 B

Plain Cement Concrete 1:4:8 Mix (one part cement,Four part M.sand and Eight part of aggrigate) using 40mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. TNDSS NO: 28V, VI (S2) V, VI (S5A) VII

Supplying and erecting centering for sides and soffits including supports and without srtutting upto 3.29m height for plane surfaces in all floors with cross bracings using miled steel sheets of size 30cm x 60cm and 10 gauge stiffened welded with miled steel sheets of size 25mm x 25mm x 3mm for boarding and laid over silver oak (country wood).Joists of size 10cm x 6.5cm dia spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced 75cm centre to centre etc., complete complying with standard specification ans as directed for the following items as per (For Drain,Deck slab & Retainingwall)TNDSS NO: 30 & 86 With out Shuttering

Plain Cement concrete of mix 1:2:4 (one part of cement, Two part of sand ,and Four part of coarse aggregate) using hard broken granite stone jelly of 20 mm gauge for foundation levelling course, including shuttering, dewatering wherever necessary and laid I layers of not more than 15cm thick complete complying with standard specifications and drawings and as directed by the departmental Engineers including all cost & conveyance of materials laying curing etc., complete as per TNDSS No 28 V,VI, (S2) (S5A)VII

RCC non pressure spun pipe with socket and spigot ends as per IS 458/2003 manufactured with sulphate resistant cement with 12 mm HI -alumina lining with rubber ring joints NP3 600mm Dia

Moorthy (BID ID -1175862)