COMPREHENSIVE REPAIRS / MAINTENANCE TO WATER SUPPLY MAIN LINE AND CONNECTED WORKS IN ARMY AREA AT UDAIPUR MIL STN

Amount

Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out any type of soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm any type of soil.

Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point

Material and labour for taking out old CI/GI Pipe 100mm dia from trenches and removing from site.

Material and labour for taking out old CI/GI Pipe 80mm dia from trenches and removing from site.

Material and labour for taking out old GI Pipe 50mm dia from trenches and removing from site.

Material and labour for taking out old GI Pipe 40mm dia from trenches and removing from site.

Supply and Laying G I TUBING 100 mm dia socket ends, medium grade including all fittings and accessories , in any length, laid in trenches fixed on ground / pedastal and making good disturbed ground/pedastal.

Supply and Laying G I TUBING 80 mm dia socket ends, medium grade including all fittings and accessories , in any length, laid in trenches fixed on ground / pedastal and making good disturbed ground/pedastal.

Supply and Laying G I TUBING 50 mm dia socket ends, medium grade including all fittings and accessories , in any length, laid in trenches fixed on ground / pedastal and making good disturbed ground/pedastal.

Supply and Laying G I TUBING 40 mm dia socket ends, medium grade including all fittings and accessories , in any length, laid in trenches or fixed on ground / pedastal and making good disturbed ground/pedastal.

Material and labour for taking out in location in existing position U/S Titon joint, including fixing of new Titon joint 150 mm dia complete with both ring and all nut & bolts including rubber geskit.

Material and labour for taking out in location in existing position U/S Titon joint, including fixing of new Titon joint 100 mm dia complete with both ring and all nut & bolts including rubber geskit.

Material and labour for repairs of CI sluice valve 80 mm bore with disconnecting from pipe line, including replacement of spindle and locking nut with GI Nut and bolts of suitable size, greasing and refixing after repair including refacing, regrinding, lathe and machine, threading work & fitted with gasket gland rope & nut bolt of suitable size and testing,complete all as specified and directed by Engineer-in-charge.

Material and labour for repairs of CI sluice valve 100 mm bore with disconnecting from pipe line, including replacement of spindle and locking nut with GI Nut and bolts of suitable size, greasing and refixing after repair including refacing, regrinding, lathe and machine, threading work & fitted with gasket gland rope & nut bolt of suitable size and testing, complete all as specified and directed by Engineer-in-charge.

Material and labour for repairs of CI sluice valve 150 mm bore with disconnecting from pipe line, including replacement of spindle and locking nut with GI Nut and bolts of suitable size, greasing and refixing after repair including refacing, regrinding, lathe and machine, threading work & fitted with gasket gland rope & nut bolt of suitable size and testing, complete all as specified and directed by Engineer-in-charge.

Material and labour for repairs of CI sluice valve 200 mm bore with disconnecting from pipe line, including replacement of spindle and locking nut with GI Nut and bolts of suitable size, greasing and refixing after repair including refacing, regrinding, lathe and machine, threading work & fitted with gasket gland rope & nut bolt of suitable size and testing, complete all as specified and directed by Engineer-in-charge.

Material and labour for repairs of CI sluice valve 250 mm bore with disconnecting from pipe line, including replacement of spindle and locking nut with GI Nut and bolts of suitable size, greasing and refixing after repair including refacing, regrinding, lathe and machine, threading work & fitted with gasket gland rope & nut bolt of suitable size and testing, complete all as specified and directed by Engineer-in-charge.

Supply and replace in existing location / position Non Return vave 80 mm bore both end flanged ISI marked including making new flanged joints with 3 mm thick rubber gasket with necessary bolts, nuts, washer etc of suitable size complete all as specified and directed by Engineer in Charge.

Supply and replace in existing location / position Non Return vave 50 mm bore both end flanged ISI marked including making new flanged joints with 3 mm thick rubber gasket with necessary bolts, nuts, washer etc of suitable size complete all as specified and directed by Engineer in Charge.

Material and labour for painting of LT panel and valve pit chamber with two coats of synthetic enamel paint of approved quality and colour over a coat of red oxide primer incl preparation of old painted steel surfaces as directed by Engineer - in charge.

Taking down or up and repairing to exting GI/CI pipe line where leakage occurred including threading all required fittings e.g. union, socket, nipple, tee,reducer, flange ,rubber gaskit,elbow, titon joint fittings etc. and earth work as site condition/requirement of following sizes.

40mm to 50mm bore pipe

80mm to 100 mm bore pipe

150 mm bore pipe

Material and labour for carring to work shop U/S submersible & monoblock motor (water cooled or oil cooled) & pump including cutting U/S winding , removing insulating material, cleaning and rewinding with PVC insulated 1100 volts grade single core copper conductor as per IS 694 winding wire of appropriate size/gauge as per existing , providing insulting mterial of superior quality , supply & replace thrust bearing , assembling the motor complete , including coupling with multistage pump , jointing & connecting with submersible cable and testing at site for following HP of any make :

2.00 HP to 5 HP

Supply only TCC90A

Supply only Liquid chlorine in 50 liters plastic container.

Supply only Alum

Supply only Blue vitreoul(Copper sulfate)

Material and labour for cleaning of swimming pool size Aprox 5.5 lakh litter capacity and balancing tank, removing complete dust and dust removing scale from wall, floor and desk area tiles with and including requried chemicals etc carefully all as par directed by Engr-in-charge

Material and labour for Buffing and polishing on stainless steel railing , Hand rail, Veritcal & Horizontal bar complete all as par directed by Engr-in-charge and the following staps are should be followed :- Frist step:- Clean and prep the stainless steel Second Step :- Buff the stainless steel Third Step:- Polish the stainless steel

Material and Labour for Testing of water from approved Govt lab samples collected from pump house No-01 at main Gate and Pump House No-02 as per norms of WHO and submission of test reports to the entire satisfaction of Engineer-in-Charge, the test report includes following parameters:- PH value, TDS(mg/l), Hardness (as CaCO3) (mg/l), Fluoride (mg/l), Chloride (mg/l),Turbidity (NTU), E.Coli (cfu), Free residual Chlorine

m/s sharma constructions

RS GREEN INDIA CONSTRUCTION