Loading…
Loading…
Tender Value
₹48.3 L
EMD Value
₹96,600
Closing Date
9 Jul 2026, 6:00 pm
Similar tender results from the same govt authority in the past 3 years.
Lt Col Sanjay Siwach, GE
GE 970 EWS C/o 56 APO PIN-913970
REPLACEMENT OF EXISTING LT OH CONDUCTOR TO UG LT XLPE CABLE, LT PANEL FEEDER PILLAR WITH CONNECTED ITEMS IN BLDG. NO P-7 TO P-11, P-18 TO P-21, P-59, P-60, P-61 TO P-72, P-222, P-447 AND STP MD ACCN AT JAK LI RC SRINAGAR UNDER GE 970 EWS
2026_MES_772982_1
GE 970 EWS-61(T)/2026-27
Open Tender
Civil Works
180 days
JAK LI RC SRINAGAR
As per tender documents
8 documents required · 8 mandatory
₹500
GE 970 EWS
₹96,600
Yes
19 Jun 2026
19 Jun 2026
11 Jul 2026
19 Jun 2026
9 Jul 2026
4 Jul 2026
19 Jun 2026 - 9 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling of MS channel or Angle iron or flat iron sections from LT poles complete all as directed by Engineer-in-Charge. | 1.33 | Qtl | - | - |
| 2 | Dismantling of insulators of any type and any size from LT poles complete all as directed by Engineer-in-Charge.. | 240 | Each | - | - |
| 3 | Dismantling of ACSR Conductorany size from LT poles complete all as directed by Engineer-in-Charge. | 4.1 | Qtl | - | - |
| 4 | Dismantling & Removing carefully Old unserviceble LT cables/ Service cable of size 16 sqmm to 35 sqmm from LT Pole to Bldg MCB DB complete all as directed by Engineer-in-Charge. | 880 | RM | - | - |
| 5 | S&F in Replacement of LT Panel compartmentalised cubical Outdoor type Floor mounted suitable for , 415 volts 3 phase, 4 wire,50 HZ AC supply system having bus bar chamber with insulated aluminium bus bar of rating 1200 Amp installed on proceline/ SMC insulator. The panel should be dust and vermin proof IP -65 class protection and made of 3.15 mm CRCA MS sheet and 50X50X6 mm thick MS angle iron frame work, powder coated finesh over one coat of red oxide on out side surface and painted in side with two coated of red oxide primer and rear opening type with apran for cable entry, closing locking arrangement including internal wiring with PVC insulated solid copper conductor FRLS cable IS 694 marked , 1100 volts grade of appropriate size and comprising of the following including necessary PCC platform of suitable size. (Loc :- JCO/ORs TRF No 1)
INCOMING:-
(i) ACB drawn-out type with adjustable microprocessor release confirm to IS/IEC:60947-2, 4 pole , LT 415 Volts, 50 Hz AC grade of 800 Amps rating 50 KA rupturing capacity with suitable for adjustable over load current and short circuit and earth fault protection - 01 No.
(ii) Digital Voltmeter 0-500 volts, square, 96 mm,flush pattern with 3 way selector switch - 01 No
(iii) Digital Ammeter 96mm x 96 mm, flush pattern with 3 way selector switch - 01 No.
(iv) 3 Nos of CTs of ratio 800/5 copper wound, Class 1.0, 10 VA – 1 Set
(iv) Indicating lamps R,Y and B Phase : 01 set of three
OUTGOING
(i) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 315 Amps rating 36 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases, - 01 Nos. (ii) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 250 Amps rating 36 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases, - 02 Nos, (iii) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 100 Amps rating 25 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases, - 02 Nos, (iii) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 63 Amps rating 25 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases, - 02 Nos, | 1 | Each | - | - |
| 6 | All as per item No 05 but bus bar of rating 1500 Amp. (Loc :-JCO/ORs TRF No 2)
INCOMING:-
(i) ACB drawn-out type with adjustable microprocessor release confirm to IS/IEC:60947-2, 4 pole , LT 415 Volts, 50 Hz AC grade of 1000 Amps rating 50 KA rupturing capacity with suitable for adjustable over load current and short circuit and earth fault protection - 01 No.
(ii) Digital Voltmeter 0-500 volts, square, 96 mm,flush pattern with 3 way selector switch - 01 No
(iii) Digital Ammeter 96mm x 96 mm, flush pattern with 3 way selector switch - 01 No.
(iv) 3 Nos of CTs of ratio 1000/5 copper wound, Class 1.0, 10 VA – 1 Set
(iv) Indicating lamps R,Y and B Phase : 01 set of three
OUTGOING
(i) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 315 Amps rating 36 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases, - 02 Nos. (ii) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 250 Amps rating 25 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases, - 01 Nos, (iii) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 100 Amps rating 25 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases, - 02 Nos, (iv) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 63 Amps rating 25 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases, - 02 Nos, | 1 | Each | - | - |
| 7 | S&F of LT feeder pillar compartmentalised cubical outdoor type Floor mounted suitable for , 415 volts 3 phase, 4 wire,50 HZ AC supply system having bus bar chamber with insulated aluminium bus bar of rating 400 Amp installed on proceline/ SMC insulator. The panel should be dust and vermin proof IP -65 class protection and made of 3.15 mm CRCA MS sheet and 50X50X6 mm thick MS angle iron frame work, powder coated finesh over one coat of red oxide on out side surface and painted in side with two coated of red oxide primer and rear opening type with apran for cable entry, closing locking arrangement including internal wiring with PVC insulated solid copper conductor FRLS cable IS 694 marked , 1100 volts grade of appropriate size and comprising of the following including necessary PCC platform of suitable size.(Loc :- Near STP)
INCOMING:-
(i) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 250 Amps rating 36 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases - 01 No.
(ii) Digital Voltmeter 0-500 volts, square, 96 mm,flush pattern with 3 way selector switch - 01 No
(iii) Digital Ammeter 96mm x 96 mm, flush pattern with 3 way selector switch - 01 No.
(iv) 3 Nos of CTs of ratio 250/5 copper wound, Class 1.0, 10 VA – 1 Set
(iv) Indicating lamps R,Y and B Phase : 01 set of three
OUTGOING
(i) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 100 Amps rating 25 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases, - 02 Nos.
(ii) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 63 Amps rating 25 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases, - 02 Nos.
(ii) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 40 Amps rating 25 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases, - 02 Nos. | 1 | Each | - | - |
| 8 | S&F of LT feeder pillar compartmentalised cubical outdoor type Floor mounted suitable for , 415 volts 3 phase, 4 wire,50 HZ AC supply system having bus bar chamber with insulated aluminium bus bar of rating 400 Amp installed on proceline/ SMC insulator. The panel should be dust and vermin proof IP -65 class protection and made of 3.15 mm CRCA MS sheet and 50X50X6 mm thick MS angle iron frame work, powder coated finesh over one coat of red oxide on out side surface and painted in side with two coated of red oxide primer and rear opening type with apran for cable entry, closing locking arrangement including internal wiring with PVC insulated solid copper conductor FRLS cable IS 694 marked , 1100 volts grade of appropriate size and comprising of the following including necessary PCC platform of suitable size.(Loc :- Near P-9)
INCOMING:-
(i) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 250 Amps rating 36 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases - 01 No.
(ii) Digital Voltmeter 0-500 volts, square, 96 mm,flush pattern with 3 way selector switch - 01 No
(iii) Digital Ammeter 96mm x 96 mm, flush pattern with 3 way selector switch - 01 No.
(iv) 3 Nos of CTs of ratio 250/5 copper wound, Class 1.0, 10 VA – 1 Set
(iv) Indicating lamps R,Y and B Phase : 01 set of three
OUTGOING
(i) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 63 Amps rating 25 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases, - 06 Nos.
(ii) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 40 Amps rating 25 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases, - 01 Nos. | 1 | Each | - | - |
| 9 | All as per item No 07 but bus bar of rating 500 Amp. (Loc :- Near P 67,P-69 & P-70 )
INCOMING:-
(i) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 315 Amps rating 36 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases - 01 No.
(ii) Digital Voltmeter 0-500 volts, square, 96 mm,flush pattern with 3 way selector switch - 01 No
(iii) Digital Ammeter 96mm x 96 mm, flush pattern with 3 way selector switch - 01 No.
(iv) 3 Nos of CTs of ratio 315/5 copper wound, Class 1.0, 10 VA – 1 Set
(iv) Indicating lamps R,Y and B Phase : 01 set of three
OUTGOING
(i) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 63 Amps rating 25 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases, - 08 Nos.
(ii) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 40 Amps rating 25 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases, - 01 Nos. | 3 | Each | - | - |
| 10 | All as per item No 07 but bus bar of rating 200 Amp.(Loc :- Near Childerns School)
INCOMING:-
(i) MCCB 4 pole , LT 415 Volts, 50 Hz AC grade of 100 Amps rating 25 KA rupturing capacitiy with adjustable Themal and Meganetic setting releases - 01 No.
(ii) Digital Voltmeter 0-500 volts, square, 96 mm,flush pattern with 3 way selector switch - 01 No
(iii) Digital Ammeter 96mm x 96 mm, flush pattern with 3 way selector switch - 01 No.
(iv) 3 Nos of CTs of ratio 160/5 copper wound, Class 1.0, 10 VA – 1 Set
(iv) Indicating lamps R,Y and B Phase : 01 set of three
OUTGOING
(i) MCB 4 pole , LT 415 Volts, 50 Hz AC grade of 40 Amps rating 10 KA - 06 Nos.
. | 1 | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.43 MB
TENDER61T_merged.pdf
Tender Documents • 2.18 MB
BOQ_865568.xls
BOQ • 7.41 MB
Download all tender documents and submit your bid