Karnataka

Active

Works

Buildings

Construction of New Anganawadi building (31) and Upgreadtion of Old anganawadi buildings (41) in Holalkere Taluk. Chitradurga Dist.

Rural Development and Panchayat Raj Department

RDPR Division Office Chitradurga | chitradrga, Karnataka

Amount: ₹6.1 CrCloses: 7 Aug 2026

Timeline

Published24 Jul 2026
Pre-Bid Meeting1 Aug 2026
Closes7 Aug 2026
Bid Opening10 Aug 2026

Tender Value

₹6.1 Cr

EMD Value

₹9.1 L

Closing Date

7 Aug 2026, 9:30 pm

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

Mohamed Rafiq.

Mobile Number

9972891068

Work Description

Construction of New Anganawadi building (31) and Upgreadtion of Old anganawadi buildings (41) in Holalkere Taluk. Chitradurga Dist.

Tender Information

Tender ID

RDPR/2025-26/BD/WORK_INDENT25353/CALL-3

Reference Number

RDPR/2025-26/BD/WORK_INDENT25353/CALL-3

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

RDPR Division Office Chitradurga

Source Website

Subscribe to view

Documents Required

13 documents required · 13 mandatory

Technical Bid

RequiredDetails of Name and address with contact no.

RequiredEMD Details.

Required2.1.P.W.D Registration Certificate Class I.

RequiredA.Tenderer must submit ongoing works commitments

RequiredInformation on works for which tenders have been submitted and works which yet to be completed.

Required3.6.Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under Assessed available tender capacity AxNx1.5- B.

Required3.3.b.Liquid assets and or availability of credit facilities of not less than Rs. 165.75 Lakhs Credit lines/ letter of credit/ certificates from banks without any conditions for meeting the fund requirement etc.

Required3.2.b.Satisfactory completed as prime contractor at least one similar work such has Building work of Value not less Rs. 303.88 lakhs in the last years Period 20221-2022,2022-23,2023-24,2024-25 and 2025-26 duly signed by not below the rank of Executive Engineer.

Required3.2.a.To qualify for award of this contract, each Tenderer in its name should have in the last five years Period 2021-2022,2022-23,2023-24,2024-25 and 2025-26 a.achieved in at least 2 financial years a minimum financial turnover of in all cases of civil engineering construction works only Rs. 1215.50 Lakhs Usually Not less than two times the Estimated annual payments under this contract Certified by Charted account with P & L Account.

Required3.2.c.Executed in any One Year in the last Five year the following minimum quantities of work 1.Earthwork/Embankment 2091.69Cum 2.PCC/RCC 1315.75 Cum 3.CC Solid Blocks/SSM/BBM 1137.48 Cum 4.Steel 71.30 MT 5.Flooring 2214.38 Sqm 6.Plastering 10209.00 Sqm

Required3.3.Each Tenderer should Availability by required following key and critical equipment and remaining can be deployed on lease or hire the relevant documents are to be furnished. List of machineries on own 1.Tipper 3 No. 2.Water tanker-02 No. 3.Needle Vibrator-02 4.Hydraulic Excavatator 03 No. 5.Concrete Transit Mixer 03 No. 6.Batch mix plant 10cum/hour 1No Lease or Hire or Own 1.Tipper 3No. 2.Water tanker-02 No. 3.Needle Vibrator-02, 4.Hydraulic Excavatator 03 No. 5.Concrete Transit Mixer 03 No.

RequiredThe Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works for an amount not less than Rs 16.97 Lakhs in any one year along with Electrical License/Registration copy.

RequiredThe Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works for an amount not less than Rs.7.25 Lakhs in any one year along with Plumbing License/Registration copy.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The tenderer should be a PWD registered and above Contractor

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

To qualify for award of this contract, each tenderer should furnish qualification information as per clause-3 and section- 3 of Standard Tender Document attached to this tender and all the Formats prescribed in the bid documents shall be filled by the tenderer in full and complete manner.

All scanned documents to be uploaded shall be in original and legible. At the time of opening of technical bid all the original documents should be produced for verification without fail to the Executive Engineer, Superintending Engineer, Chief Engineer. Otherwise the tender will be rejected. During the time of evaluation of bids, if the employer finds any certification / information furnished is false, such tender will be rejected.

Work done certificate should be issued by competent authority not below the rank of Executive Engineer with work indent number is compulsory.

The Financial Bids will be open on the dates mentioned or after approval of the technical bids from the competent authority.

The employer is not responsible for any delay in accessing e - Procurement Portal and the employer is not responsible for non production of uploaded documents in e-Procurement Portal. The tenderer has to ensure that all the documents required are uploaded correctly.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents applicable KWs and further orders thereon. The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit(FDR) for an amount equivalent to 5% of the Contract price.

Additional security for unbalanced tenders amount put to tender and quoted amount should be in FDR for 365 day in favour of EE,PRED,Chitradurga. Contractor should be produced before the work order.

The tender of any tenderer who does not accept the conditions contained in the tender document and conditional tenders will not be accepted.

The cost of tender fee shall not be refundable. No interest will be paid by the Government on the Earnest money deposit.

The rates quoted shall be through rates for finished items of work inclusive of all lead and lifts, loading and unloading charges, all incidental charges and all taxes Local or General, Royalty etc., complete payable to the Government or Local bodies in the Region.

The rates quoted shall be inclusive of providing barricading fittings of danger lights, Jungle clearance near work spot / watchman etc., complete and maintained till completion of work and removing on completion as directed by the Engineer-in-charge of work. Rates quoted should includes clearance of site prior to commencement of work and its closure in all respects and holds good for all works under all conditions of site, moisture and weather.

A Cess of the total approved amount of contract will be deducted from the work bill towards the Building and other construction workers welfare in accordance with the Govt. Order No. LD 300 LET 2006 Bangalore dated 18-1-2007. Royalty on construction materials and other taxes will be deducted as per prevailing Government orders. Contractor should follow strictly the prevailing rules of labour act.

All the materials required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost. All quantity and gradation of metal collected for the works should be got approved by the competent authority before use.

Contractor should execute the project with least impact to the environment. The Contractor should maintain the work during defective liability period as per contract conditions.

Omission and Typographical errors which is in the opinion of the Executive Engineer, will not be a ground for claims of extra payment. If any of the dates mentioned happens to be a general holiday, the next working day will holds good.

Liquid assets and/or availabity of Credit facilities of not less than 30% of amount put to tender (credit lines/ letter credit/ certificates from banks without condition.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, P.R.E.Division, Chitradurga during office hours on all working days.

All tenders are accepted or rejected by the Executive Engineer,PRED.Division, Chitradurga is reserved.

Profit and loss acccounts and turnovers must be signed by CA with UDIN number.

Condition mentioned in Bid document KW-4 is accepted.

Item rates are excluding GST. GST amount will be paid seperately as per prevailling rules.

Technical Criteria

Capabilities of Vendor

Details of Name and address with contact no

Others -- Details of Name and address

EMD Details.

Others -- EMD Details.

2.1 P.W.D Registration Certificate Class I.

PWD Registration Certificate (Class I/II/III/IV)

3.3(b) Liquid assets and /or availability of credit facilities of not less than Rs. 165.75 Lakhs (Credit lines/ letter of credit/ certificates from banks without any conditions for meeting the fund requirement etc.

Others -- LOC

3.2(b) Satisfactory completed as prime contractor at least one similar work such has Building work of Value not less Rs. 303.88 lakhs in the last years Period (2021-2022,2022-23,2023-24,2024-25 and 2025-26) duly signed by not below the rank of Executive Engineer.

Work Done Certificate

3.2(a) To qualify for award of this contract, each Tenderer in its name should have in the last five years Period (2021-2022,2022-23,2023-24,2024-25 and 2025-26) (a) achieved in at least 2 financial years a minimum financial turnover of (in all cases of civil engineering construction works only) Rs. 1215.50 Lakhs (Usually Not less than two times the Estimated annual payments under this contract (Certified by Charted account with P & L Account).

Audited CA Certificate of Annual Turnover

3.2(c) executed in any One Year in the last Five year the following minimum quantities of work 1) Earthwork/Embankment 2091.69Cum 2) PCC/RCC 1315.75 Cum 3)CC Solid Blocks/SSM/BBM 1137.48 Cum 4) Steel 71.30 MT 5) Flooring: 2214.38 Sqm 6) Plastering 10209.00 Sqm

Others -- Qty. wise work done

3.3.Each Tenderer should further demonstrate Availability by owning required following key and critical equipment and remaining can be deployed on lease or hire the relevant documents are to be furnished. List of machineries on own 1.Tipper 3 No. 2.Water tanker-02 No. 3.Needle Vibrator-02 4.Hydraulic Excavatator 03 No. 5.Concrete Transit Mixer 03 No. 6.Batch mix plant (10cum/hour) 1No Lease or Hire or Own 1.Tipper 3No. 2.Water tanker-02 No. 3.Needle Vibrator-02, 4.Hydraulic Excavatator 03 No. 5.Concrete Transit Mixer 03 No.

Others -- Vehicle documents

A.Tenderer must submit ongoing works commitments

Others -- Ongoing works

Information on works for which tenders have been submitted and works which yet to be completed.

Others -- tenders have been submitted

3.6Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity ( AxNx1.5 B ) A Maximum value of civil engineering works executed in any one year during the last five years (Updated 2026-27 price level ) taking into account the completed as well as works in progress N Number of years prescribed for completion of the works for which Tenders are invited 1/12years. B Value, price level, of existing commitments and on-going works to be completed during the next. 11/12 years from the probable date of award of this contract.

Others -- tender capacity

The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works and should have executed similar electrical works for an amount not less than Rs 16.97 Lakhs (in any one year) along with Electrical License/Registration copy.

Others -- Electrical License/Registration copy.

The Tenderer or his identified sub-contractor should possess valid license for executing water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works for an amount not less than Rs.7.25 Lakhs (in any one year) along with Plumbing License/Registration copy.

Others -- Plumbing License/Registration copy.

Details of Name and address with contact no

Others -- ADDRESS

Details of Name and address with contact no.

Others -- ADDRESS

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹9.1 L

Important Dates

Last Activity

24 Jul 2026

Published

24 Jul 2026

Bid Opening

10 Aug 2026

Download Ends

6 Aug 2026

Pre-Bid Meeting

1 Aug 2026

BOQ Preview

•

Construction of New Anganawadi building (31) and Upgreadtion of Old anganawadi buildings (41) in Holalkere Taluk. Chitradurga Dist.

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and t...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical Specifications, including setting out, shoring, strutting, barricading, caution ...

•

Providing and laying in position Cement Concrete for leveling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes ...

•

Providing and M25 Design Mix Using 20mm laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregat...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) PWD SR 2023-24, Vol-II, P. No. 9, I. No. 5.4 with all lead, lift, loading, unloadi...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. Th...

•

Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjace...

•

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse s...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:4 (1 cement :4 coarse sand) inc...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ov...

•

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 type A, including jointing with seal ring conforming to IS 5382, leaving 10mm gap for thermal expansio...

•

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off co...

•

Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corn...

•

Providing Colour washing such as green, blue or buff to give an even shade :New work (two coats) with a base coat of white washing with lime with colour of approved quality, after thoroughly brooming ...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth c...

•

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle gr...

•

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 Percent and conforming to I.S. 15622, of approved make, in all...

•

Providing and laying flooring and steps fine dressed granite stone slabs 40 mm thick on cement mortar bed 1:6, 25 mm thick, and pointed with cement mortar 1:3 over existing cement concrete bed , inclu...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever req...

•

Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete ...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...

•

Providing and fixing in position fully panelled Matti Nandi wood shutters for doors with stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...

•

Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...

•

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 100 58 1.90mm PWD CSR 2023-24, Vol-II, P. No. 107, I. No. 12.74.2 with all lead, lift, l...

•

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 125mm PWD CSR 2023-24, Vol-II, P. No. 107, I. No. 12.73.1 with all lead, lift, loading, ...

•

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 150x10mm PWD CSR 2023-24, Vol-II, P. No. 107, I. No. 12.76.3 with all lead, lift, loading, unlo...

•

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.PWD CSR 2023-24, Vol-II, P. No. 105, I. No. 12.58 with all lead, lift, loading, unloadin...

•

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms PWD CSR 2023-24, Vol-II, P. No. 105, I. No. 12.64 with all lead, lift, load...

•

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. compl...

•

Providing & fixing of louvered ventilator made out of multi chambered PVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fre...

•

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elasto...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

•

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standar...

•

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, la...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including ...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

•

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm ap...

•

Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofi...

•

Art Painting on Walls Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt,...

•

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even ...

•

SUMP TANK: Providing and laying water proofing treatment to the Water tanks &Liquid Retaining structures with two component acrylic polymermodified cementitious waterproofing membrane with minimum elo...

•

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structura...

•

SOAKPIT: Supplying & errection of RCC rings for well steining of 0.3 Mtr Depth using M-20 grade concrete using clean graded granite or trap or jelly of approved quality 20mm and down size well compact...

•

ELECTRIFICATION: Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running befor...

•

Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the ...

•

Supplying and fixing PVC/metal conduit Deep junction box (PWD CSR for Electrical Works for the Year 2021-22, Part-1) 19/20mm Deep Junction Box with all lead, lift, loading, unloading, labour, fuel, ...

•

Supplying and fixing PVC/metal conduit Deep junction box (PWD CSR for Electrical Works for the Year 2021-22, Part-1) 25mm Deep Junction Box with all lead, lift, loading, unloading, labour, fuel, hir...

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12 mm thick wood, after due groove cutting, finishing with necessary cement plastering complete. (PWD CSR for El...

•

Supplying And Fixing Metal Fan Box with Round Hook.(PWD CSR for Electrical Works for the Year 2021-22, Part-1) with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equip...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to I...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.(PWD CSR for Electrical Works for the Year 2021-22, Part-1) 6Amps one way wit...

•

Supplying 4mm thick plastic sheet with necessary nitches for fixing switches, regulators etc, and fixing on existing wooden or metal box using N.F. screws.(PWD CSR for Electrical Works for the Year 20...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

•

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolts nuts, GI Strips and washers complete Minimum Weight of GI Pipe: 7.3 Kgs (BESCOM CSR for the Year 2021-22, Part-II) with a...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975(BESCOM C...

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff(BESCOM CSR for the Year 2021-22, Part-IV) LT Cable: 2.5 to 25 Sq...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

•

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.(PWD CSR for Electrical Works for the Year 2021-22, Part-1) 12 Sweep (300mm) with a...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...

•

Supplying of .feet - PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70Percent lumen maintenance with CRI 80. Power Input: 220-240V @ 50/60Hz & Pow...

•

Supply of round square recess surface mounted rolling type LED Down light with .W GU 10 LED Lamp Rib Fabricated from Die cast aluminium with white powder coated prewired to mains connector has swiveli...

•

Supplying Fixing of 70 150 Watts lamp holder 2 Pin (PWD CSR for Electrical Works for the Year 2021-22, Part-1) with all lead, lift, loading, unloading, labour, fuel, hire charges of machineries, equip...

•

Fixing all types and all capacities of fluorescent false ceiling spot light CFL LED fittings indoor on the wall ceiling rafters girders using 23 0.0076 twin twisted PVC insulated wires, required N...

•

Fixing a ceiling Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rosnecessary length o...

•

Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...

•

Fixing all types and all capacities of 1x4 / 2x2 LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 23/0.0076” twin twisted PVC insulated w...

•

Sanitary & Plumbing: Providing and fixing brass bib cock of approved quality PWD SR 2023-24, Vol-II, P. No. 117, I. No. 13.2.2 20mm NB Brass Bib Cock with all lead, lift, loading, unloading, labour, f...

•

Providing and fixing unplasticised PVC connection pipe with brass unions - 45 cm length, 20 mm nominal bore PWD SR 2023-24, Vol-II, P. No. 118, I. No. 13.8.2.2 with all lead, lift, loading, unloading,...

•

Providing and fixing Chlorinated Polyvinyl Chloride(CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings,including fixing the pipe wi...

•

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying tr...

•

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, pla...

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, ...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.PWD SR 2023-24, Vol-II, P. No. 133, I. No. 14.8 Pedestal for W...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

•

DISMANTLING DEMOLITION: Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area. In ceme...

•

Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of En...

•

Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured - In cement mortar PWD SR 2023-24, Vol-II, P. No. 188, I. No. 19.11.2 with...

•

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking to the appropriate disposal area as per direction of Engineer-in-charge. - Of area 3 m² and below PWD SR 2...

•

Demolishing R.C.C. work manually by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area with all lead, lift, loading, unloading, l...

•

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge. - Asbestos Sheet work PWD SR 2...

•

Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking to the appropriate disposal area as per direction of Engineer-in-charge.PWD SR 2023-24, Vol-...

•

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inc...

•

Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:6 including cutting the patches in proper shape and replastering the surface of the wall includi...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08Percent and conforming to IS: 15622, of approved make, in all colours and shade...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufacture includ...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 Percent) total coated thickness with zinc coating...

•

Upgradation Anganawadi: Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cem...

•

Providing and Applying high elastic & resilient Acrylic polymer Waterproofing coating which is single component, cold applied, water based acrylic and UV resistant water proofing treatment to the Exis...

•

Providing and fixing in position fully panelled Matti Nandi wood shutters for doors with stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as ...

•

Providing and fixing Chlorinated Polyvinyl Chloride CPVC pipes having thermal stability for hot cold water supply including all CPVC plain brass threaded fittings including fixing the pipe with clamps...

•

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 20 mm nominal bore ((PWD SR for Buildings VOL II for the year 2023-24. I. No. 13.12 P.No. 120) with all lead, lift,...

•

SOAK PIT, Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils,...

•

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (P.No.4 I.No.5.2 Volume-2 PWD SR 2025-26) with all lead, lift...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS 13592 Type A inncluding jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansi...

•

Providing and fixing unplasticised P.V.C connection with PTMT Nuts coller and bush of approved quality and colour 15mm nominal bore with 450mm length. SR 2023 24 Vol 02 Page No.121, Item No. 13.27.2. ...

•

Providing Thermo Mechanically Treated bars of grade Fe 550D or more Steel reinforcement for R.C.C. work including straightening cutting bending placing in position binding and anchoring to adjacent me...

•

Providing and fixing glass wool slab 12mm thick resin bonded slab with density 48kg/m3 for insulation of cavity wall, fixed using GI wire 200 SWG, GI chicken mesh 12.50mm x 24 SWG including necessary ...

•

Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.. (SR 2023-24 Vol 02 Page No.188 , Item...

•

Addendum I Additionalities for Formwork, Centering & Scaffolding for Chajja 45% (PWD CSR VOL I for the year 2023-24. Sl. No. 19 , P.No. 111) with all lead, lift, loading, unloading, labour, fuel, hire...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thick- ness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,...

•

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material to the appropriate disposal area as per direction of Engineer-in-charge. Asbestos cement sheet (PWD CS...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW-4 Anganawadi HLK 25353 CE Final corrected CALL3.doc

Tender Document • 3.67 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].