PROVN OF DRAIN ALONGSIDE BOUNDARY WALL AT CABS, PROVN OF GRILLS IN P-76 AT NOFRA, PROVN OF STORM WATER DRAIN AND ALLIED WORKS AT NAD TROMBAY AND ADDN/ALTN AND SPL REP TO FIRE FIGHTING SYS AND FIRE ALARM AND HEAT DETECTION SYS WITH VISUAL INDICATION I

Amount

Excavation in trenches in soft/ loose soil not exceeding 1.5 m wide n.exc 1.5m depth for fdn etc for shaft, wells, cesspits, man holes, pier holes etc. n.exc 10sqm on plan and n.exc 1.5m depth and getting out in average soil complete all as specified and directed.

All as per item 1.00 above but depth exc 1.5 Mtr and n exc 3 Mtr in Hard/Dense soil.

Excavation over area n. exc 1.5m deep and getting out in any type of soil for foundation etc, and getting out, complete all specified and directed.

All as per item 3.00 above but depth exc 1.5 Mtr and n exc 3 Mtr in Hard/Dense soil complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, as in wall etc complete all as specified and directed. Note: PCC bond stone and face work shall be measured and paid separately

Extra over stone walling for hammer dressing to face stones with maximum depression on fair face from straight edge held against the dressed surface not exceeding 20 mm for granite or trap stone of face beds & joints as specified of random rubble walling uncoursed or brought upto course complete all as specified and directed.

M&L 15mm thick rendering in cement mortar (1:6) on brick/stone masonry/concrete surfaces of walls, finished even & smooth surfaces without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B2(20mm graded aggregate) as in surface channels and drains complete all as specified & directed.

Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in soft/loose soil complete all as specified and as directed.

Removing excavated material/soil to a distance exc 1.5 Km but n.exc 5.0 Km and depositing where directed at a level not exceeding 1.5metre above the starting point , complete all as specified and directed.

Demolition of brick work or stone/ boulder mansonry built in cement mortar and removing debris out side MD land complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L formwork to edge of conceret flate,treat break in floors,window cills, conceret railling, opening in conceret wall ,floor and roof nexc 20cm wide and side of RCC bands in walls, horzintoal or sloping and similar work exc10cm and n exc 20cm wide fair finished surfaces. and complete all as specified and directed

M&L for TMT steel bars 10mm dia and over, cut ot lenth,bent to shape required,including cranking bending spirally for hooping for columns,hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per Item No 14.00 but 5mm dia and over upto including 10mm dia in stirrups, spacers and binders

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M & L two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of previously untreated steel surfaces of steel and iron exc 10 cm width or girth complete all as specified and as directed.

M&L powder coated aluminium door/window/ventilators shutters and frame any type including all fittings,cleats,handles,door stopper,locking arrangement and arrangement to receive glass/wire mesh etc with beading,glazing cleats screws, rubber gasket fixing of glass /gauge/particle board complete all as specified and directed. Note: weight of fittings and fixturs shall not be measured separately while measuring weight of frame & shutter and rate quoted shall be deemed to inclusive of these element

S & F aluminium anodised grills of approved design for window/ventilators/balcony and fixing with F/U channel for window, ventilators, balcony opening in architectural or rectangualr type design in existing building, including drilling as required in RCC sections/ any type of masonary, complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling, and mass concrete, paving etc complete all as specified and directed.

M&L for precast cement concrete block masonry with solid block of grade (C-5) having block density not less than 1800 Kg/cum, exc. 10cm in width and setting in CM 1:4, complete all as specified and directed.

M&L for preparing of wall plastered / unplastered surfaces and applying three coats of white wash, complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-1, using 20 mm graded stone aggregate as in coping, bands, plinth courses etc, weathering slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.

M & L for Reinforced Concrete Pipe, class NP 3, 450mm bore with and including collars, laid in trenches and jointed with cement etc, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) as in encasing for RCC Hume Pipes including necessary formwork etc, complete all as specified and directed.

Removing excavated material/earth to a distance exceeding 250 metre and not exceeding 500 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and directed.

M & L for providing precast cement concrete type A1 1:1.5:3 (using 20mm graded stone aggregate) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30 cm -ditto-

M&L for re-inforced cement concrete type B1 1:2:4 (using 20mm graded aggregate) for beams, lintels over 1.5m span complete all as specified and directed.

M&L 20 mm thick rendering in cement mortar (1:6) on stone masonry/concrete surface of walls, finished even & smooth surface without using extra cement complete all as specified and directed.

M & L for sand cushioning by spreading in trenches fine dry river sand by gently by punning down manually as in cable protection complete all as specified and directed.

Supply and laying un-reinforced precast concrete cable cover class LV, type-I, flat size 250mm x 150mm x 40mm laid in trenches complete all as specified and directed.

M & L for PCC 1:3:6, type C-2, (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Dismantling of old UNSV/rusted steel tubular poles 9 mtr long necessary disconnecting cables/over head condcutor and removing unserviceable pole from site complete all as specified and directed.

Supply and erection of steel tubular swaged pole 9.00 metres long designation 410-SP-31 complete with cast iron base plate, finial taper plug, bolts, nuts and screws etc including and numbering of poles with white paint on black paint base and stripping with black paint (100 mm each stripe) 3 Nos at equal distance from bottom (above PCC coping) upto a height of 1200 mm complete all as specified and directed. Note : Earth work and concrete foundation shall be measured and paid seperately under relevant items.

Supply and Laying or fixing or passing through pipe, XLPE/PVC insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 10 Sqmm 4 core including necessary connection and providing cable lugs as required including disconnection/taking down of unserviceable existing cablecomplete all as specified and directed.

Supply, laying or fixing 40 mm bore galvanised iron tubing, light grade with all fittings for passing of cables laying in trenches including all fixing accessories complete all as specified and as directed.

S&F street light bracket made out of 50 mm dia GI light grade tubing not less than 1.2 mtr long bend to shape including pole clamps made out of 50 x 6 FI and nut, bolts and washers including taking down old rusted complete all as specified and directed.

Supply & fix in repair 3 core 1.5 Sqmm size multistranded FRLS copper conductor PVC unsheathed 650 / 1100 Volt cable for interconnection of cable looping box to Street Light Fitting complete all as specified and directed.

S & F PVC termination box of size 20cm x 15cm x 10cm with front openable shutter and locking arrangement with one 1 Amps MCB and three Nos 63 Amps rated aluminium bus bar strips fixed on porcelain insulator and fixed to pole with MS flat iron clamp 40mm x 4mm size with nuts and bolts washers, etc. complete including taking down unserviceable one all as specified and directed. Note : A sum of Rs 1,500.00 towards sch of credit shall be deducted to arrive the contract sum

Parmatma Enterprises

ARCHANA ENTERPRISES