SPECIAL REPAIR TO SEWERAGE LINE BEHIND BLDG NO P 1001 1002 1003 1079 1080 1082 1509 1510 1511 1085 1086 JCOS OR MD ACCN AT AJMER LINE OF 12 CSR AND SPECIAL REPAIR TO TOILET BLOCK AND PROVN OF SHED FOR CASED under ARO of BR I GE (A) Central Jodhpur

Amount

Excavation in trenches n.exc 1.5 mtr wide and n. exc 1.5 mtr depth for foundation, forshafts, wells,cesspits, manholes, Pierholes etc n. exc 10 sqm on plan and n. exc 1.5 mtr in depth and getting out in any type of soil , complete all as directed.

Ditto--All same as item No. 01 above but exc 1.5 mtr and n.exc 3.0 mtr deep.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 150mm bore of pipe , complete all as directed.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 200mm bore of pipe , complete all as directed.

Demolition and breaking up RCC/Salt glazed stoneware drain pipe set & jointed in cement mortar laid in trenches 250mm bore of pipe , complete all as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for remaval of debirs to a distance n exc 50mtrs and depositing where directed complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster on stone walls including raking out joints, hacking for key, scrubbing down with water etc , complete all as directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone agg as in surface channel or benching including finishing the top of benching even and smooth using extra cement (Forming fair finished channel shall be measured separately) , ,complete all as specified and as directed.

Material an labour for RCC pipe NP-2 150mm bore laid in trenches over existing bed and jointed complete with coller fixed and jointed in cement mortar and tested ,complete all as specified and as directed.

Material an labour for RCC pipe NP-2 200mm bore laid in trenches over existing bed and jointed complete with coller fixed and jointed in cement mortar and tested ,complete all as specified and as directed.

Material an labour for RCC pipe NP-2 250 mm bore laid in trenches over existing bed and jointed complete with coller fixed and jointed in cement mortar and tested ,complete all as specified and as directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregates) as in foundation filling in mass conc,complete all as specified and as directed.

M&L for plain cement concrete 1:3:6 C2 (using 40 mm graded crushed stone aggregates) as in foundations filling and mass concrete,complete all as specified and as directed.

Demolition of stone masonry built in cement mortar ,complete all as specified and as directed.

M&L for squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6 ,complete all as specified and as directed.

All as per item No 15 above but except stone in CM 1:6,complete all as specified and as directed.

Extra over stone walling for hammer dressing to face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints,complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on stone masonry surface (Internally) of walls mixed with WPC, as per manufacturer’s direction and finished the surface even and smooth without using extra cement,complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on stone masonry surface (externally) of walls mixed with WPC, as per manufacturer’s direction and finished the surface even and smooth without using extra cement,complete all as specified and as directed.

Material and labour for plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone agg as in coping of manhole including necessary form work ,complete all as specified and as directed.

Supply only waterproofing compound.(ISI Marked)

Returning , filling in soft/disintegrated Rock (any type) incl spreading levelling, watering and well ramming in layers not exceeding 25 Cm thick ,complete all as specified and as directed.

Removing surplus excavated material exc250m but n.exc 500m where directed at a level not exceeding 1.5 Mtr above the starting point ,complete all as specified and as directed.

Supply and Fix cast iron foot steps, n. exc 5 Kg each in manholes,complete all as specified and as directed.

S&F 75mm thick Jodhpur type stone slab not exc 2m in length dressed all face & along exposed edged size faced both sided as in drain cover,complete all as specified and as directed.

Cutting in to existing manhole for connecting new drains and making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-1 smooth finish and reforming benching as askedof following size/dia. 150 mm dia

ditto as per srl item No. 26 but 200 mm dia

Dismantling of sand cast,cast iron or RCC drain pipe jointed in cement mortar of size 100mm bore,complete all as directed.

S&F sand cast,Cast Iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors 100mm complete all as specified and directed.

S&F CI bends any radius 100mm all as specified and directed.

M &L for cutting to Bituminious road for laying of RCC hume pipe & making good as per road specification as per direction of Engr-in-Charge.

Cutting and grubbing of bushes grass and tree surrounding sewage line and levelling of ground around the sewage line, finish the surface and removing the waste material to distance exc. 50m and n exc. 250m and clearing the site,complete all as directed.

M&L for PCC (1:4:8) type D-2 as in foundation filling or mass concrete using 40 mm graded aggregates,complete all as specified and as directed.

M&L 40 MM thick PCC 1 :2 :4 (using12.5 mm graded crushed stone agreegates) as in DPC.

M&L bitumen blown any grade , applied hot , two coats,to concrete surface at the rate of 1.5 kg per sq m per coat.

M&L for roughly squared stone lintels hammer dressed on face and soffits hoisted set and pointed in CM (1:6) complete n,exc 3 Cm in length,complete all as specified and as directed.

M&L for 5 cm thick sand stone slabs as in chajjas n.exc 2m in length punched dressed on face and along exposed edges ,self faced on other side and set and pointed in cm 1:4 ,complete all as specified and as directed.

M & L RCC nominal Mix using 20 mm graded stone aggregate as in beam, roof beam, cantilevers, lintel beam, etc. ,complete all as specified and as directed.

M&L Form work to side and soffit of floor or roof beam etc,complete all as specified and as directed.

M&L mild steel TMT bar 10 mm dia and over cut to length bend to shape required cranking bending spirely for hooking ends and binding with and including mild steel wire (annealed ) not less than .90 mm dia or securing with clip,complete all as specified and as directed.

M&L mild steel TMT bar 5 mm dia and over up to and including 10 mm dia in stirrups spaces and binders cut to length bend to shape required cranking bending spirely for hooking ends and binding with and including mild steel wire (annealed ) not less than .90 mm dia or securing with clip,complete all as specified and as directed.

M&L Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’,complete all as specified and as directed.

100 mm thick cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggegrates) as in floor finishing surface rough to receiving the topping layer ,complete all as specified and as directed.

Plain Cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as in floor topping, 40mm thick, surfaces finished even and smooth without using extra cement,complete all as specified and as directed.

M&L Hard core of broken stone or boulders gauge n exc 63 mm , deposited , spread and levelled in layers n.exc 15 cm thick , watered and rammed to a true surface,complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) 50 mm thick as in plinth protection,complete all as specified and as directed.

S/F of 35mm thick 2nd class Hard wood paneled door shutter factory made (two panel) with lock rail andpanel of 9mm thick BWP commercial ply wood, the size of rail and stile is as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated,complete all as specified and as directed.

S&F 100 mm thick Medium weight , cold rolled mild steel butt hinges.

S&F of aluminium anodized,tower bolt 200 mm long.

S&F aluminium anodised handle cast type of size 150mm long

S&F of aluminium alloy anodised sliding door bolt woth hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long complete

S&F floor door stopper of aluminium alloy body and tounge anodised with hard drawn steel spring 140 mm long in repairs.

M&L for two coat of enamel paint over a coat of pink primer on new wooden surface including preparation of surface, over 10Cm width or girth ,complete all as specified and as directed.

M&L for two coat of enamel paint over a coat of red oxide primer on steel surface including preparation of surface over 10Cm width or girth ,complete all as specified and as directed.

M&L for 20mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregate) complete all as specified and as directed.

M & L applying two coats of oil bound distemper on prepared wall putty surfaces complete.

M/L two coat of colour wash on newly plastered/ unplastered surfaces over one coat of white wash on wall & including preparation ,complete all as specified and as directed.

S&F machine made precast cement concrete blocks (interlocking paves) rubberired finished coloured of 60mm thick with 6mm top layers of anti abrasive material laid over 25mm thick sand cushion . The interlocking joints shall be filled with fine sand . The compressive strength of layer shall not be less than 350 Kg/Cm2 complete all as specified and directed.

M&L pre painted galvalume aluminium zink coating GI based corrugated sheet 0.50 mm thick of lour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screws as spacified.

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

S&F steel work in tubular trusses, column including special shaped washers etc complete using ERW induction butt welded tubes confirming to IS 1161-1979 Gde St-240,complete all as specified and as directed.

Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

Demolition pcc flooring (un reinforeced) of any description and any position as in flooring plinth protection etc ,complete all as specified and as directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:4 floor finished even & rough to recievr tiling/floor finish,complete all as specified and as directed.

M&L non skid / mat finish ceramic colour tiles of size 300 mm x 300 mm and 7 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on stone masonry RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water,complete all as specified and as directed.

M&L for 10mm thick rendering in CM 1:3 over stone masonary surfaces incl finishing the surface fair & rough to receive tiling etc ,complete all as specified and as directed.

M&L Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth ,complete all as specified and as directed.

M&L for glazed colour ceramic tiles of size 250x350x7mm/250x375x7mm laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles,,complete all as specified and as directed.

Demolition of stone slabs laid dry jointed & pointed as in shelves etc sunshades

M&L Green marble slab, 16-18mm thick machine cut as cooking platform or in any position, set and bedded in gray cement slurry over & including 15mm thick screed in cement mortar (1:4) and pointed in white cement with admixture of pigment to match the shade including cutting, polishing (mirror type) complete all as specified.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 ,complete all as specified and as directed.

M&L for Flush pointing to square rubble masonry Jodhpur type regular course in CM 1:3 ,complete all as specified and as directed.

M&L preperartion of newly plastered surfaces of wall and applying two coat of wall putty for even and smooth surfce and applying two coat of oil bound distemper ,complete all as specified and as directed.

M&L preperartion of newly plastered surfaces of ceilling and applying three coat of white wash ,complete all as specified and as directed.

M&L for one coat of white wash old wall surfaces incl preparation,complete all as specified and as directed.

All as per Item No. 76 above but on ceiling,complete all as specified and as directed.

Taking down steel window/ventilator,complete all as directed.

Taking down of chowkats or frames w/o taking down shutters nexc 1.50 Sqm,complete all as directed.

All as per item No 79 but area exc 1.5Sqm but not exc 4.00 sqm

S/F of 35mm thick factory made partly glazed and partly panelled shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc,complete all as specified and as directed.

S/F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail paneling of plain colour PVC sheet to be fitted the MS Frame/sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, ,complete all as specified and as directed.

M/L for solid PVC door frame of size 50x47mm made out of 5mm thick pvc sheet reinforced with MS square tube ,complete all as specified and as directed.

Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified (with or without cooler opening as directed by engr-in-charge)

Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified .(with or without cooler opening as directed by engr-in-charge)

Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified

Factory made box type steel ventilator without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified

S&F Flush shutters 40 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specifid and directed by engr-in-charge.

S &F of stainless steel butt hinges 100 mm size.

S&F 100mm size single action door spring hinge complete

S&F of 4mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden cleats (Min weight 300 gms) Make Polytuff

S&F soap dish of PTMT fixed with screws Make Polytuff

Stainless steel sink ,1.00mm thick for kitchen or laboratory with plug ,washers waste pipe , cast iron cantilever brackets connecting union overall size 495mmx420mm with bowl size 410mm x 330mmx160mm as in repair.Make Nirali/Bluestar/Jayana

S&F as in repairs of vitreous china clay water closet squatting pan ORISSA Pattern size 580x 440 mm white with integral foot rest incl 'P' or 'S' traps, flush pipe of 32mm dia HDPEpipe etc all as specified. Make: Cera/Parryware/Hiundware

M&L Vitrous china wash basin , white flat back size 550x400 mm mm including 15 mm CP fancy type pillar tap , waste pipe, MS brackets and PVC connection complete all as specified fixed in repai. Make: Cera/Parryware/Hiundware

M&L Vitrous china wash basin , white flat back size 550x400 mm mm including 15 mm CP fancy type pillar tap , waste pipe, MS brackets and PVC connection complete all as specified fixed in repai. Make: Cera/Parryware/Hiundware

S&F PVC SWR pipes single socketd in any length with rubber rings joints laid in trenches or in floors 110mm ,complete all as specified and as directed.

All as per item No .100 above but fixed in wall.

All as per item No .100 above but 75mm dia laid in trenches

All as per item No 100 above but fixed in wall

S&F PVC (SWR) branch pieces single socketed Y equal or unequal 110mm,complete all as specified and as directed.

S&F PVC (SWR) beds any radius 110mm

All as per item No. 106 above but 75mm dia with oval acess door

S&F PVC SWR vent cowl 110mm

S&F PVC SWR vent cowl 75mm

S&F of PVC SWR floor trap plain grating including jointing with solvent cement 75mm dia

M&L (SWR) guly trap 125/110mm setting and jointing with solvent cement

Taking down or up steel tubing and connection including cleaning for refixing or removal to store ,complete all as specified and as directed. (a) 25 mm dia

ditto as per sir item No. 111 but 20 mm dia

ditto as per sir item No. 111 but 15 mm dia

S/F of GI tubing, medium grade, galvanized, with all fittings fixed to wall ,complete all as specified and as directed. (a) 25 mm dia,

ditto as per srl item No 114 but 20 mm dia

ditto as per srl item No 114 but15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

S/F of chromium plated shower rose 125mm dia with or with out swivel joints, any size, including fixing to steel pipe all as specified.

S/F as in repairs of stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia all as specified specified.

S&F as in repairs of angular stop cock with chromium plated long thread with flange ,complete all as specified and as directed.

S&F 15mm dia chromium plated stop cock with flange ,complete all as specified and as directed.

S&F 15mm dia chromium plated bib cock with flange ,complete all as specified and as directed.

Supply only low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and includign pvc connection complete

Dismantling water tanks of capacity exc 250 ltrs but.nexc 500 ltrs and removing to store all as specified.

S&F rotational moulded polythene water storage tanks triple layer (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I capacity of tank 500 ltrs including tank led cover complete with fixing arrangement. Make: Sintex/Rotex/Star

S&F white moulded polythylene water storage tank of 1000 Ltr capacity (cylindrical vertical with closed tap) hoisted and fixed in position including taking down old tank all as specified and directed.Make: Sintex/Rotex/Star

Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms 20mm-210gms /25mm-455gms/40mm-690gms ,complete all as specified and as directed.

M&L PCC (1:2:4) for water tank plinth all as specified 50 mm thick (using 20mm graded crushed stone aggregates),complete all as specified and as directed.

Writing letters or figures (Black Roman, Italic or Indian n. exc 30cm high with thick paint complete all as specified

S & F as in repairs vitreous china wash down water closet with seat & cover as in rerpairs complete incl fixing of flush pipe & flushing cistern, etc complete.

Taking down existing old tar-felt from RCC roof, stone and other treatment (brick bat coba) etc. careully including cleaning roof surface by wire or coir brush and removing all grits ,stone,fungus,moss and finnaly washing down with water to the entire satisfaction of E in charge and removing debrish and rubbish out of the premises to a distance exc. 1.0 km but not exc 2.5 Km complete all as specified and directed.

M&L for carrying out water proofing treatment to roofs in the following stages (i) M&L for rendering 10mm thick in 1:4 mixed with integral water proofing compound all as per mfr inst over conc surfaces finished even and smooth w/o using extra cement. (II) First coat of bitumen primer confirming to IS 3384 @0.40 Kg/Sqm over plastered surafces (III) Second coat of binding material using blown type bitumen confirming to IS -702 Grade 85/[email protected] kg per Sqm (IV) Third layer of APP modified polymeric membrane centre core of 20 micron HMHDPE , other film 20 micron each thickness 2 mm having weight 2.25 Kg/sqm (V) Final coat of binding material using blown type bitumen confirming to IS 702 of Grade 85/25@ 1.2 Kg/Sqm (vi) Material and labour for 40 mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate padding over roof laid in slope grooves 6 mm wide and 10 mm deep at 1.2 m interval in both ways or part thereof and filled with mastic bitumen (1:1) proportion complete all as specified and as directed

Supply only Integral water proofing compund (ISI Marked)

Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc complete

M & L for Point wiring complete with 1.5 sqmm, single core, multi stranded, copper conductor, PVC (FRLS), insulated, unsheathed cable, confirming to IS-694, 1100 volts grade, ISI marked (class V conductor), in and including PVC concealed conduit (MMS), ISI marked not less than 20mm, with accessories etc and including sunken pressed steel terminal boxes in wall but including 3mm thick plastic laminated sheet top cover (ISI marked hylem sheet Make Anchor and 1.50 sqmm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for One light point controlled by one, one way switch

ditto as per srl item No. 134 but One fan /Exhaust fan, point controlled by one way switch.

ditto as per srl item No. 134 but One socket outlet 3 pin 6 Amps on same board

ditto as per srl item No. 134 but One socket outlet 3 pin 6 Amp on independent board

All as per item No 2 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .

S&F switch flush type single pole one way 6 Amp ISI Marked

S&F switch flush type single pole one way 16 Amp ISI Marked.

S&F socket out let , 5 pin , 6 Amp piano type.

S&F socket out let , 3 pin ,16 Amp piano type.

S & F Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body

S&F LED tube light fitting three colour, 20 watt,4000 lumens, complete with all accessories etc internally pre-wired , including LED lamp-1No made of connectiong up with , multistranded copper conductor of size 1.00 sq mm flexible cable Make of branded:Syska/Phillips/Havells complete all as specified.

S&F insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings including 7 watt LED Lamps ISI Marked.

S&F Prewired distribution board in sheet metal Prewired when MCB to be used with 200 Amps rated copper bus bar Confirming to relevant IS SPN 8 way,-Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

S&F MCB Single pole 5 to 30 Amp, 10 kA, ISI Marked.

S&F MCB SPN 63 Amp, 10 kA, ISI Marked.

Supply and fixing 10 sq mm1100 volts grade heavy duty cable PVC insulated aluminium conductor,served with inner sheathing of PVC sheathed in service connetion complete all as specified and directed.

M/s Chawariya Enterprises

BEYLIM INFRA

M/S KAUTILYA GARG

Nikhat nirman