Balance work of Construction of Barracks for BTC Home Guard Sharbo in District Kinnaur (HP) (SH- Building portion, including brick work, flooring and painting work, wood work and WS and SI

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains, including dressing of sides and ramming of bottoms,with in all lead and lift including getting out the excavated soil and disposal of surplus excavated soils as directed, All kind of soil , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers in Super-structure for all floors in all heights, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level, 1:5:10 (one cement : five coarse sand): 10 graded stone aggregate 40 mm (fourty millimeter nominal size) , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (one Cement : four coarse sand) : eight graded stone aggregate 40 mm ( forty millimeter nominal size)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Stone soling tightly hand Packed under floors ,including watering ,ramming and consolidating complete and carriage of materials,labour tool and plants through all modes of transportation withn in all leads and lifts including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (One cement : one point five coarse sand) : three graded stone aggregate 20 mm (twenty milimeter nominal size), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : cement mortar 1:4(one cement : four coarse sand) : including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 -0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 18 mm (Eighteen millimeter)thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm( twenty millimetre)thick base cement mortar 1:4 (1 one cement : 4 four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour and shade:Area of slab over 0.50 sqm. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately)(Second class teak wood35 mm thick shutters. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing commerical ply wood ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be Paid for separetly )6mm six millimeter thick ,including carriage of material through all modes of transporation with in all leads and lifts as per PWD specfication and as per direction of the Engineer-in charge

Providing and fixing cup board shutters 25 mm (Twenty five millimeter)thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-charge including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.Double strip (horizontal type)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm(thirty five millimeter) thick shutterswith ISI marked M.S. pressed butt hinges bright finished of required size 9.27.1.1.1 Second class teak wood. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :25 mm dia including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than gradeAC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc.complete300x16 mm :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

300x16 mm(Three hundred into sixteen millimeter)

250x16 mm(Two hundred fifty into Sixteen millimeter)

Providing and fixing bright finished brass hard drawn hooks and eyes :250 mm (Two hundred fifty millimetre)including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :150x10 mm (one hundred fifty into ten millimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

100mm (Hundred millimeter)

75 mm(Seventy five millimeter)

Kota stone slab flooring over 20 mm (Twenty millimeter)(average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) :25 mm (twenty five millimetre)thick. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Kota stone slabs 20 mm (Twenty millimeter)thick in risers of steps, skirting, dado and pillars laid on 12 mm(Twelve millimeter) (average) thick cement mortar 1:3 ( one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 1000x1000 mm ncluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge..including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified bythe manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (Twelve millimeter)thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder,railings, brackets, gates and similar works .including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing hand rail of approved size by nwelding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.M.S. tube .including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (one cement: six coarse sand).including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat withcement primer.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Applying priming coat:With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood).including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and applying plaster of paris putty of 2 mm (two millimeter) thickness over plastered surface to prepare the surface even and smooth complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Making plinth protection 50mm thick of cement concrete 1:3:6 ( one cement : three coarse sand (zone - III) : six graded stone aggregate 20 mm (twenty millimetre) nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal (forty millimeter)size, well rammed and consolidated and grouted with fine sand, including necessary excavation levelling & dressing & finishing the top smooth.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Constructing Course rubble hammer dressed U shape open surface drain with side wall .15x22cm fifteen into twenty two centimetre) in cement in cement mortar 1:6(one cement :six sand ) and inside plastring with cement plaster 1:3(One cement : three sand) including earth work and laying 10 cm (ten centimetre )cement concret in 1:5:10( one cement :five sand :ten graded stone aggregate ) of 40 mm (forty millimetre) nominal size ) and 7.5cm (seven point five centimetre) cement concrete 1:2:4 ( one Cement : two sand : four graded stone aggregate of 20 mm (twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design. including carriage of materials within all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm(Twenty centimeter) in depth,including consolidating each deposited layer by ramming, watering, etc. and disposing of plusexcavated soil as directed, within a lead of 50m(fifty meter)Pipes, cables etc, not exceeding 80 mm dia. :.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. span of size 580x440 mm with integral type foot rests:.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), on forming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm (five hundred fifty into four hundred)with a 15 mm (fifteen millimeter)CP Brass single hole basin mixer. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm (five hundred ten into one thousand forty)bowl depth 225 including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 8 mm (eight millimeter)dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. panincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing water closet squatting pan (Indian approved quality & make and as per the direction of Engineer-in-charge.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.15 (fifteen millimetermm nominal diaincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32 mm (thirty two millimeter)dia. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing 100 mm (Hundred millimeter)Ssand cast Iron grating for gully floor or Nahni trap. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing water closet squatting pan (Indian superior glass (of approved quality) complete with 6 mm(six millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing toilet paper holder :C.P. brass.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PVC soil, waste and vent pipes including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

100 mm dia (hundred mm diameter) PVC Pipe

75mm dia (seventy five millimeter diameter) PVC Pipe

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm(twenty millimeter nominal size) and cost of cutting holes and making good the walls etc. :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge

75 mm dia pipe(seventy five millimeter diameter).

100 mm dia pipe (Hundred millimeter ).

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge

100 mm dia pipe (Hundred millimeter ).

100 mm dia pipe (Hundred millimeter ).

Providing and fixing PVC plain bend of required degree:including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge

100 mm dia pipe (Hundred millimeter ).

75 mm dia pipe(seventy five millimeter diameter).

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3mm (three millimeter)thick bolts and nuts complete including fixing with approved adhesive etc. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

75 x75x75mm (Seventy five into seventy five into seventy five millimeter) diameter

110x100x100 mm (One hundred ten into one hundred ten into one hundred millimeter) diameter .

Providing and fixing PVC collars .including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

100 mm(Hundred millimeter) in dia Sand cast iron

75 mm(Seventy five millimeter) dia Sand cast iron

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

100 mm (hundred millimeter)inlet and 100 mm(hundred millimeter) outlet S

100 mm(hundred millimeter) inlet and 75 mm (seventy five millimeter)outlet

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with ement concrete 1:3:6 ( one cement : three coarse sand :six graded stone aggregate 12.5 mm (Twelve point five millimeter)nominal size), including necessary plaster and pointing in cement mortar 1:4 (one cement : four coarse sand) :.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

75 mm dia(seventy five millimeter)diameter

For 100 mm dia (hundred millimeter) diameter

Providing and fixing PTMT liquid soap container 109 mm (one hundred nine millimeter)wide, 125mm (One hundred twenty five millimeter) high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.:.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm (two hundred fifteen millimeter )long, 200 mm(two hundred millimeter) wide with minimum distances of 37 mm (Thirty seven millimeter)from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms:.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm (four hundred fifty millimeter)long towel rail with total length of 495 mm(Four hundred ninety five millimeter),78 mm (Seventy eight millimeter)wide and effective height of 88 mm(Eighty eight millimeter), weighing not less than 170 gms(One hundred seventy grams):.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PTMT shelf 440 mm(Four hundred forty millimeter) long, 124 mm (One hundred twenty four millimeter)width and 36 mm (Thirty six millimeter)height of approved quality and colour,weighing not less than 300 (Three hundred)ms.:.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PTMT 15 mm (Fifteen millimeter)Urinal spreader size95x69x100 mm(Ninety five into sixty nine into hundred millimeter) with 1/2" BSP thread and shapes,weighing not less than 60 gms.:.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PTMT urinal cock of approved quality and colour.15 mm nominal bore, 80 mm l(Eighty millimeter)ong, 42 mm(Forty two) high and 30mm wide with BSP female threads weighing not less than 48 gms:.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

15 mm dia(Fifteen millimeter) diameter

20 mm dia (twenty millimeter )diameter

Providing and fixing gun metal gate valve with C.I. wheelof approved quality20 mm (Twenty millimeter)nominal bore (screwed end) ::.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm (Forty five centimetre)length15 mm(Fifteen millimeter) nominal bore:.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing C.P. brass shower rose with 15 or 20 mm (Fifteen or Twenty millimeter)inlet :150 mmone hundred fifty millimeter) diameterincluding carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

15mm dia(Fifteen millimeter )diameter

20mm dia(Twenty millimeter )diameter

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm(Fifteen millimeter) nominal bore.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm (Fifteen millimeter)nominal bore.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Providing and fixing PTMT soap Dish Holder havinglength of 138mm, breadth 102mm, height of 75mm(Seventy five millimeter) withconcealed fitting arrangements, weighing not less than106 gms..including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

Constructing brick masonry manhole in cement mortar1:4 ( 1 one cement : 4 four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 one cement : 1.5 one point five coarse sand (zone- III) : 3 three graded stone aggregate 20 mm( twenty millimeter nominal size), foundation oncrete 1:4:8 mix (1 one cement : 4 four coarse sand (zone- III) : 8 eight graded stone aggregate 40 mm (Forty millimeter) nominal size), inside plastering 12 mm(Twelve millimeter) thick with cement mortar 1:3 (1one cement : 3 three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 one cement : 2 two coarse sand : four graded stone aggregate 20 mm (Twenty millimetere) nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80(Ninety into Eighty )cm and 45cm( Forty five )deep including C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten millimeter )internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation .5:.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.

PARTAP CHAND CONT.