Water Proof Treatment on the terrace of Round dining hall building and Renovation of room no 09 10 27 28 30 at NGRI Guest House Hyderabad

Description of Items :

Removing of betumin sheet/ coating and cleaning throughly, burning the surface of the bitumin removed with kerosene burner or butane torch with , cleaning including chipping / hammering/haking by gunhammer and removing of water tank platforms and chipping of cement surface and clean the surface with instant spoll absover for cementing works complete the job, disposal of material Out side NGRI campus as desired by the contractor

Demolishing brick work manually /by meachanical In cement mortar means including stacking of serviceable material and disposal of unserviceable material within along the compound wall as per instructions of Engineer-in-Charge

Providing and applying of bitumen remover on the concrete surface with make of RXSOL-20-1004 Bitumen Tar Remover (Vizag chemicals) to clean concrete surface without any damaging of concrete floor and arrange necessary tools to complete the work as per instructions of Engineer-In-Charge. From Sl.No.1

Chipping/ Roughing of Cement flooring and roofs/skirting/plaster etc laid in cement mortar, without damaging the existing RCC roof including stacking material and disposal of material inside along the Compound wall as per instructions by Engineer-In-Charge from sl.No.1

Extra for providing and mixing water proofing material in cement plaster work including mixing of conplast X421C integral based water proofing compound or equivalent as per manufacturer specifications.

Providing and injecting approved grout in proportion recommended by the manufacturer of fosroc render roc plag /or equalient into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including, arranging required nozzigle points for pumping and cutting of nipples after curing etc. Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC workcomplete as per directions of Engineer-in?Charge

Providing and applying two or more coats of Tapcrete with (1:2) ratio with gry cement and including laying of fibre mesh and applying of tapcrete sides of parapet wall up 300mm to complete the as per Instructions of Engineer-in-charage

Providing and laying of coal rock surkhi in floors mixing with sand, cement with 1:5:10 (1 cement : 5 coarse sand : 10 coal rock surkhi of standard size) including stacking material and Inside along the NGRI compoud wall and neatly dressed and complete the job as per Instructions of Engineer-In-Charge

Repairs to plaster of thickness 12mm to 40mm in patches of area 2.5 sq. metres or more area with 1:4 (1 cement : 4 coarse sand) and top layer 3 mm thick cement plaster 1:3 (1 cement : 3 fine sand) and mixing of water proof compound of Conplast X421 IC,With cement mortar 1:4 (1cement: 4 coarse sand) & 1:3 (1cement: 3 coarse sand) including disposal of rubbish to the dumping ground within inside the along Compound wall as suggested by Engineer-In-Charge.

Grading roof for water proofing treatment with Providing and laying cement concrete 1:2:4 (1 Cement: 2 Coarse Aggregate : 4 graded stone aggreate of 12.50mm nominal size) of 40mm thick with 12.50mm nominal size stone aggregatefor terrace. Item includes mixing of water proofing compound Conplast X421 IC of M/s. Fosroc mixed @ 150ml per bag of cement which is been mixed for concrete. The work includes proper mixing of these items correctly, compacting and finishing the same to required slopes etc under including cutting the patch in proper shape raking out joints and cutting of groove preparing and plastering the surface of the walls and to required slope and treating similarly the adjoining walls upto 150 mm height including rounding of junctions of walls and slabs in all leads and lifts complete all as required and directed by Engineer-In-Charge. (Once the concrete work is completed and the setting time is completed, the surface should be filled with water and kept for observation for 48 hours )

Providing and fixing of on wall face unplasticised - PVC moulded fittings/ reducer 6" to 4" with accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Reducer 150mm to 110mm dia

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 35 in superstructure above plinth level up to floor V level in Cement mortar 1:6 (1 cement : 6 coarse sand) all shapes and sizes in

Providing and applying of fosroc brush bond roof guard three or more coats @0.5 ltrs/sqm on the concrete surface and applying of prime coat of Nitoprime AW@ 1 ltrs@ 8 sqm to complete the work as per instructions of Engineer-In-Charge

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Providing and fixing GI clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, Code including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Dismantling For thickness of tiles 10 mm to 25 mm tile work in floors and roofs/walls/skirting/plaster etc laid in cement mortar including stacking material and disposal of material inside along the Compound wall as per Instructions of Engineer-in-Charge

Demolishing cement concrete 1:3:6 or richer mixmanually /by meachanical means including disposal of material out side the campus as desired by the contactor.

Demolishing 1:4:8 or leaner mix or richer mixmanually /by meachanical means including disposal of material out side the campus as desired by the contactor.

Dismantling G.I. pipes 15 mm to 40 mm nominal bore (external work / Internal ) including excavation and refilling trenches after taking out the pipes,manually/bymechanical means including stacking of pipes and disposed of unserviceable material out side the campus as desired by contractor and G.I. pipes ans fittings are hand over the Pump house section/store.

Providing and laying in position 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) cement concrete of specified grade excluding the cost of centring and shuttering - All works upto plinth level.

Providing and fixing on 75 mm diameter wall/column face/floor unplasticised PVC Prince SWR , Type-B Class. Fittings (working pressure 4 Kg.per sqcm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. (i) Single socketed pipes ii) double socketed joints

Providing and fixing on 110 mm diameter wall/column face/floor unplasticised PVC Prince SWR , Type-B Class. Fittings (working pressure 4 Kg.per sqcm) rain water pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. (i) Single socketed pipes ii) double socketed joints

Providing and fixing on 75 mm Coupler wall/column face/floor unplasticised-PVC moulded Prince SWR , Type-B Class fittings/accessories for unplasticised-PVC rain water pipes con- forming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. i/c testings

Providing and fixing on 75mm pushfit couplers wall/column face/floor unplasticised-PVC moulded Prince SWR , Type-B Class fittings/accessories for unplasticised-PVC rain water pipes con- forming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. i/c testings

Providing and fixing on 75 mm bend Bend 87.5 degree/ less or more push pit couplers wall/column face/floor unplasticised-PVC moulded Prince SWR , Type-B Class fittings/accessories for unplasticised-PVC rain water pipes con- forming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. i/c testings

Providing and fixing on 110 mm bend Bend 87.5 degree/ less or more push pit couplers wall/column face/floor unplasticised-PVC moulded Prince SWR , Type-B Class fittings/accessories for unplasticised-PVC rain water pipes con- forming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. i/c testings

Providing and fixing on 75 mm door bend Bend 87.5 degree/ less or more push pit couplers wall/column face/floor unplasticised-PVC moulded Prince SWR , Type-B Class fittings/accessories for unplasticised-PVC rain water pipes con- forming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. i/c testings

Providing and fixing on 110 mm door bend Bend 87.5 degree/ less or more push pit couplers wall/column face/floor unplasticised-PVC moulded Prince SWR , Type-B Class fittings/accessories for unplasticised-PVC rain water pipes con- forming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. i/c testings

Removing & refixing the existing door shutter Of area 3 sq. metres and below including cutting/repairing to required size or the same may be handed over to Stores Section as directed by Engineer-In-Charge.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacture) of approved make in all for the sizes of 12"x 24" , with high light colours,shades except burgundy,bottle green,black, of any size as approved by Eningeer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Removing dry or oil bound distemper by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Applying two coats of Water thinnable cement primer of approved brand and manufacture on wall surface: to complete the job as per Instructions of Engineer-In-Charge

Providing and applying of Birla wall care putty of two (or) more coats to the Walls & Ceiling over the plastered surface to make the surface even and smooth without undulations in all leads and lifts complete all as required and directed by the Engineer-In-Charge.

Wall painting with plastic emulsion paint of approved Asian premium 1st quality and manufacture to give an even shade: to complete the job as per instructions of Engineer-In-Charge

Two or more coats on new work over an under coat of of wood primer approved brand Painting with synthetic enamel paint of approved Asian Apcolite brand and manufacture of required colour to give an even shade: to complete the job as per instructions of Engineer-In-Charge

French spirit polishing: Two or more coats on new works including a coat of wood filler and approved brand

Providing and fixing Chlorinated CPVC Brass 20mm pipe Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and make of Ashriwad and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

Providing and fixing white vitreous china pedestal type water closet (European type) W.C. pan with ISI marked white solid plastic seat and lid with seat and lid, S- Type with make of Hindu ware or equilent and C.P. brass hinges and rubber buffers, 10 litres low level white vitreous china flushing cistem & C P flush bend with fittings & CI/MS brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required:

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: make of parry ware 475x340x145mm including 15mm piller taps (G3164A1) , including painting of fittings and brackets, cutting and making good the walls wherever required: as approved by Engineer

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete

Providing and fixing PTMT Waste Copling for wash basin and sink, of approved quality and colour Waste coupling 38 mm of 83mm length and 77mm breadth weighing not less thant 60gms.

Providing and fixing Semi rigid pipe 32mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Providing and fixing 15 mm nominal bore C.P angle stop cock of standard design and of approved make conforming to IS:8931 with make of Seiko make to arrange the all necessary requiements to complete the job as per instructions of engineer In-Charge

Providing and fixing wall mixer of standard design and of approved make conforming to IS:8931 with make of JAQUAR Wall Mixer 3 in 1 System - Florentine (FLR 5281) or equalent make to arrange the all necessary requiements to complete the job as per instructions of engineer In-Charge

Providing and fixing 15mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make of Seiko conforming to IS:8931.

Providing and fixing 15 mm nominal bore C.P. Short body two in one bib cock of approved quality conforming to IS standards and weighing not less than 620 gms. with make of Seiko or equilent to arrange the all necessary requiements to complete the job as per instructions of engineer In-Charge

Providing and fixing 100 mm diameter SS shower rose with 15 or 20 mm inlet with shower arm five flow over head massage shower (F160012) make of Seiko or equilent to arrange the all necessary requiements to complete the job as per instructions of engineer In-Charge

Providing and fixing of 100mm SS jalies to arrange the all necessary requiements to complete the job as per instructions of engineer In-Charge

Providing and fixing SS soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing UPVC nahini trap\ floor trap including laying of cement concrete of 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of nominal size).

Providing and fixing 15mm nominal bore C.P Health Faucet with 1 meter flexible pipe make of CERA or Equielent and wall hook approved make. The fixing include drilling & installation of with C.P. brass screw with making the wall good with finishes as per instruction of Engg. In charge etc. complete

Providing and fixing Rectangular shape Cera mode 500x 700 mm mirror of superior glass (of approved quality) and of required shape and size with wooden beeding frame of approved make and shade with 5 mm thick glass mirror with double coat for protection and longevity and silver plating on the back for better reflection and arrange necessary requirements to complete the job as per Instructions of Engineer-In-Charge

Providing and laying Vitrified tiles Size of Tile 600x600 mm in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, joints including grouting the joint with white cement & matching pigments etc. complete.

Providing and laying Vitrified tiles Size of Tile 600x600 mm in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, joints including grouting the joint with white cement & matching pigments etc. complete. dark colour

Providing and fixing of WPC door shutters with make of Austins or equalient with thickness of 18mm , required colour shade and design approved and arranging 3 nos 3" ss hinges , to complete the work as per instructions of Engineer-In-Charge

Providing and fixing SS tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete

Providing and fixing 125 mm SS handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing 250x16 mm SS sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

Providing precast 40mm thick cement concrete 40mm thick 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and fixing with brackets etc, texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding, opening of slabs and polishing to edges to give high gloss finish etc. Granite of any colour and shade ,Area of slab upto 0.50 sqm washbasin area complete at all levels to complete the job as per Instructions of Engineer-In-Charge

Providing and laying Decorative sand stone wall iles in different sizes in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based)..

Providing and fixing 18 mm thick (for cupboard) including ISI marked required SS hinges for each side of shutter (3Nos) IS : 3818 marked with necessary screws ISI marked flush door shutters make of raveela or equivalent conforming to IS : 2202 (Part I) decorative type laminated venier or equaleint , core of block board construction with frame of 1st class hard wood and well matched designed sunmica matt/glaze finish with varying colours , use 1mm thick outside sunmica and 0.8mm thick inside with vertical grains or cross bands and face veneers on both faces of shutters.

Providing and fixing chromium plated 125 mm SS handles with necessary screws etc. to complete job as per Instructions of Engineer-In-Charge

P/F fixing of rectanglur 5mm thick 2'x4' mirror glass with superior quality with wooden beeding to complete the job with necessary requirements to complete the job as per instructions of engineer-in-Charge

Half brick masonry with common Cement mortar 1:4 (1 cement :4 coarse sand)burnt clay F.P.S. (non modular) bricks of class designation 35 in superstructure above plinth level up to floor V level

SITC of a 1.5 TR inverter AC ( Make Mitsubhishi, O general) with suitable recessed MS enclosure along with suitable MCB

SITC of 2x6 sq. mm Copper Conductor ( Red and Black)+1x2.5 sq. mm copper conductor (Green) for earth for incoming supply Finolex Make

SITC of Calling Bells

SITC of 2 Modular Bell Push (Legrand Make)

Supply and Installation of 2x4 sq. mm (Black and Red Colour)+1x2.5 sq. mm green colour earth wire for A.C (Finolex Make)

Supply and Installation of a recessed MS box type 18 Modular box along with its plate and cover (Legrand Make)

Supply and Installation of suitable recessed 1.5 sq. mm copper conductor wiring for 1 Fan, 2 Light points, Four numbers of three point 5A sockets, Four numbers of 5A switches, one fan regulator, one number of fan point, one number of 16 A switch and 16 A sockets (Finolex make) with

Supply and installation of suitable recessed two way wiring for board circuit of one foot lamp, one fan and one tube light) and one way wiring for two 5A sockets (Finolex make)

SITC of one geyser (15 Litre Capacity) with suitable recessed 4 sq. mm copper conductor wiring (Havells, Crompton Grieves)

Supply and installation of suitable recessed copper conductor wiring for the geyser with 2x4 sq. mm Black and Red colour copper cable with 1x2.5 sq. mm green colour wire for earthing, 20 A switch control and light point inside bathroom (Finolex make)

Supply and installation of a recessed MS box type 3 modular box along with covering for a one number of 5A switch controlled 5A socket (Legrand Make)

Heavy duty 9" Exhaust Fan (Crompton)

Supply and installations of 5A sockets (Legrand mylink model)

Supply and installations of 1 way 5A switches (Legrand Mylinc)

Supply and installations of 2 way 5A switches (Legrand Mylinc)

Supply and installation of 20 A switches with indicator (Legrand Mylinc model)

Supply and Installation of 20/10 A Sockets (Legrand Mylinc model)

Supply and installation of foot lamps (Philips make)

Supply and installation of 48" ceiling fans (Crompton make)

Supply and installation of 36 W LED tube lights (Philips make)

Supply and installation of 20W LED tube lights (Philips make)

Supply and installation of LED bulb (Philips Make)

supply and installation of 125 A double door Legrand VTPN without MCCB

Supply and Installations of 10 A MCB's(Legrand Make) to be fitted in VTPN enclosure

Supply and Installations of 32 A MCB's(Legrand make) to be fitted in VTPN enclosure

supply and installation of 160 A 4 pole MCCB with suitable metal enclosure (Legrand)

Supply and installation of angle holders

ROYAL ENTERPRISES

GANGI SURENDER

BODASU CHANDRASHEKAR

Y RAJA SHARMA

Tadem Reliable Services LLP