CONSTRUCTION OF ROAD FROM RAJWAL TANDA TO RAJWAL IN HUNASAGI TQ. DIST. YADGIR.

CONSTRUCTION OF ROAD FROM RAJWAL TANDA TO RAJWAL IN HUNASAGI TQ. DIST. YADGIR.

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disp...

Construction of unlined surface drains of average crosssectional area 0.40 m2 in soil to specified lines, grades,levels and dimensions. Excavated material to be used in embankment (average lead 25 m)...

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Compacting original ground supporting embankment: -Loosening, leveling and Compacting original ground supporting

embankment to facilitate placement of first layer of embankment, scarified to a depth o...

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction, with all lead, li...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads,

transporting to site, spreading, grading to required slope and compacted to mee...

Construction of Granular Sub-Base by Mix in Place Method by providing well graded Gravel, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavato...

Water Bound Macadam Mechanical means Using Screening Crushable type such as Moorum or Gravel, Grading-I (63 mm to 45 mm):- Providing, laying, spreading and compacting stone aggregates of specific siz...

Water Bound Macadam Mechanical means Using Screening Type B (11.2mm agg), Gravel,Grading-II (53 mm to 22.4 mm):- Providing, laying, spreading and compacting stone aggregates of specific sizes to water...

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including

cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanica...

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface, with all lead, lifts, loading & unloading charges, cos...

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen VG-30 to required line, grade and level...

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B seal coats with bituminous binder VG-30, Case - II : Type B Pr...

Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including

painting and printing etc, Ordinary kilometer stone (precast), with all lead, lif...

Reinforced cement concrete M15grade 200 m stone of standard design as per IRC:8-1980, fixing in position including

painting and printing etc, 200 m stone (precast), with all lead, lifts, loading & unl...

Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including

finishing and lettering but excluding painting, Boundary pillar / Guard Stone, with...

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made

of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vi...

Providing and erecting direction and place identification retroreflectorised sign as per IRC:67:2022 made of high intensity

grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick ...

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2

area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC...

Providing and fixing of typical 'Citizen Information Board A" as per specifications and drawing. Two ACP Sheet of 4mm

thick having minimum 0.25mm thick aluminum skin both sides and fixed over a back s...

Construction of Granular Sub-Base by Mix in Place Method by providing well graded Gravel, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavato...

Water Bound Macadam Mechanical means Using Screening Crushable type such as Moorum or Gravel, Grading-I (63 mm to 45 mm):- Providing, laying, spreading and compacting stone aggregates of specific siz...

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared

sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding -8% Culverts (Head walls)

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding -8% Culverts (Head walls)

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation,...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification, with all lead, lifts, loading & unloading charges, cost and conveyance...

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification, with all lead,...

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe

of embankment complete as per drawing and Technical specifications, Stone/Boul...

A toe wall for toe protection can either be in dry rubble masonry in case of dry rubble pitching or pitching with stones in wire crates or it can be in PCC M15 nominal mix if cement concert block have...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding -8% Culverts (Head walls)

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding -8% Culverts (Head walls)

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding -8% Culverts (Head walls)

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation,...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification, with all lead, lifts, loading & unloading charges, cost and conveyance...

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification, with all lead,...

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe

of embankment complete as per drawing and Technical specifications, Stone/Boul...

A toe wall for toe protection can either be in dry rubble masonry in case of dry rubble pitching or pitching with stones in wire crates or it can be in PCC M15 nominal mix if cement concert block have...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding -8% Culverts (Head walls)

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding -8% Culverts (Head walls)

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding -8% Culverts (Head walls)

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation,...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification, with all lead, lifts, loading & unloading charges, cost and conveyance...

Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification, with all lead,...

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe

of embankment complete as per drawing and Technical specifications, Stone/Boul...

A toe wall for toe protection can either be in dry rubble masonry in case of dry rubble pitching or pitching with stones in wire crates or it can be in PCC M15 nominal mix if cement concert block have...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding -8% Culverts (Head walls)

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding -8% Culverts (Head walls)

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding -8% Culverts (Head walls)

Laying Cement Concrete Pipe NP3 (burried conduits) of 500mm dia on first class bedding of granular material including fixing collar with cement sand mortar 1:2 but excluding excavation, protection wor...

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification, with all lead, lifts, loading & unloading charges, cost and conveyance...