Creation of 1x63KVA Sub Station at Pallanwala upper Mohalla Palatia under SSY , falling under the jurisdiction of Electric Sub Division Jourian on Turnkey basis

Creation of 1x63 KVA Sub Station at Pallanwala upper Mohalla Palatia under SSY (Providing/Supplying, Erection/Installation, Testing & commissioning comp Job)

11/0.433 KV, 3 Phase 63 KVA, 50 Hz Aluminium wound Distribution Transformer of latest energy efficiency Level 2 new as per latest upto date amendment with externally fitted MCCB with able box and 4x4.

Gapless Surge Arrester, 9 KV, 10 KA, Lightening Arrestor with Polymer housing Station Type

11 KV GO, AB Switch 3 Phase, 3 Pole, 200 amp, vertical type

11 KV Horn Gap Fuse Set 3 Phase, 200 amp

120 mm² Single core cable, 1.1KV Grade, PVC insulated stranded conductor FRLS type

ST Poles 9.0 Mtr long (ST -410 SP 33)

11 KV Polymeric Composite Disc Insulators 12KV, min following load 45 KN, Lightening impulse 75KV positive and 80KV negative, creepage distance 320mm with Fittings

GI Channel/Angle/Flat of sizes including clamps

Galvinized Nuts & Bolts

Earthing of Sub-Station -Excavation of earth pitof diameter 650mm and deapth 3000mm, installation of earthing pipe of 40mm nominal bore and 4mm wall thickness and length 2.5m long as per IS 1239 GI Strip for neutral earthing of size 25mm into 3 mm for connection of transformer body, GO Set and lightening arrestor as per IS 2629/85, GI Nuts & Bolts, refilled with earth enhancement material

11 KV Polymeric composite Pin Insulators 12KV, 5KN,lighting inpulse 75KV positive and 80KV negative, creepage distance 320mm

Galvanized Stay Set with 50X8mm Stay clamp, Guy insulator (2 Nos), anchor plate (200X200X6mm) Nuts & Bolts, 2 nos turn buckles,1.8mm long, 16mm diameter solid GS stay rod and 7/3.15mm dia GI standard wire complete

Wedge connectors/PG Clamps

Danger Plates with Clamps

GI Barbed wire for Anti Climbing

Cement Bottoming 1:2:4 mix as per REC Standards 0.5cum/pole

Painting of Poles Red-Oxide

Painting of Poles Aluminium Paint

Sundry items like Aluminium Lugs, Jumpers, Binding Tape Aluminium Thimbles etc.

Laying of 0.10 km 11KV line on PCC Poles 9.0 Mtr long using ACSR Weasel for Creation of 1x63 KVA Sub Stn. at Pallanwala upper Mohalla Palatia under SSY ( Providing/Supplying, Erection/Installation, Testing & commissioning comp Job)

PCC Poles 9.0 Mtr long (WL:300Kg )

GI Channel X-arm including clamp and braces

ACSR weasel Conductor(30 mm²)

PG Clamps for ACSR Weasel Conductor

11 KV Polymer composite Pin Insulators 12KV,5KN, Lighting impulse 75KV positive and 80KV negative, creepage distance 320mm

11 KV Polymer composite Disc nsulators 12KV, min falling load 45KN, Lighting impulse 75KV positive and 80KV negative, creepage distance 320mm

Galvanized nuts & Bolts

Danger Plates with Clamps

Anti Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20 mm 2.5 mtr long through GI Strip

Stone Pad

Aluminium Jointing sleeves

Galvanized Stay Set with 50X8mm Stay clamp, Guy insulator (2 Nos), anchor plate (200X200X6mm) Nuts & Bolts, 2 nos turn buckles,1.8mm long, 16mm diameter solid GS stay rod and 7/3.15mm dia GI standard wire complete

Laying of LT line on PCC Poles 8.0 Mtr long (WL : 200 Kg) using 120mm sq AB Cable for dispersal of power from newly created 63 KVA Sub station at Pallanwala upper mohalla Palatia under SSY. ( Providing/Supplying, Erection/Installation, Testing & commissioning comp Job)

PCC Poles 8.0 Mtr long (WL: 200 Kg)

120mmsq AB cable

Tension Clamp

Staright through Cable joinkit

Galvanized nuts & Bolts

Danger Plates

Anti Climbing Device with Clamps

Earthing Complete by GI Pipe 40 mm or GI Rod 20 mm 2.5 mtr long through GI Strip

Stone Pad

Insulating Piercing Coonector

PG Clamps

Galvanized Stay Set with 50X8mm Stay clamp, Guy insulator (2 Nos), anchor plate (200X200X6mm) Nuts & Bolts, 2 nos turn buckles,1.8mm long, 16mm diameter solid GS stay rod and 7/3.15mm dia GI standard wire complete

# of occurrences