Repair/ replacement of worn out parts of 5cusec x 10m head pump of unit-3 along with allied works at LIS Rathua.

Repair/replacement of worn out parts of 5cusec x 10m head pump of unit-3 along with allied works at LIS Rathua.

Decoupling of 05 cusec x 10m head Horizontal casing pump of unit no.3 at LIS Rathua from the motor assembly and dismantling the pump from the base frame. Carriage of the dismantled 05 Cusec Horizontal casing pump set, to the nearest roadside, using manual labour, head load to nearest tractor road , loading in tractor trolley by manual labour again unloading and loading in the transport vehicle at main road near Gho Manhasan and carriage to the workshop for repairs. Repair to 5cusec x 10m head horizontal casing pump set at workshop by way of dismantling and extraction of damaged internal parts. Repair to the pump shaft by way of remetalling of the shaft, turning, polishing, aligning, threading at ends and making of new keyways and straightening of the same to proper size. Job includes repairs to impeller by way of remetalling, machining, brazing, turning and finishing to accurate size including making of new key way of the same specifications. Providing and fitting of new bushes 2no.s, new gland rings, new bearings as per sample, new studs/bolts on it, applying sufficient amount of grease to avoid excessive wear and tear, gland packing as per requirement, complete assembling of pump set after carrying out necessary repairs. Shifting back to the LIS Rathua after carrying out necessary repairs at workshop and then fitting/reinstallation at the base frame, coupling with the motor by making proper alignment and testing on partial/full load. Complete job including cost of material and labour charges etc. Repairs/servicing to the LT control panel for 3x40HP Motors of LIS Rathua. The job involves disconnecting the incoming and outgoing cables of L.T. control Panel. Repairing by way of complete dismantling of the damaged cables, removing carbon from the burnt places of the LT control panel and then cleaning with recommended chemicals. Servicing of main incomer 630 Amp and 2No.s outgoing 200Amp. MCCBs of LT control panel by cleaning/servicing by recommended chemicals making them free from carbon. Providing/fitting of 1no. outgoing 200Amp MCCB and 2no.s 185mm2 aluminium thimbles in place of damaged ones. Insulation of the bus bars wherever required. Complete job includes cost of material and labour charges for skilled and semiskilled labour, hire charges of tools and tackles to be employed at site for execution of job including the out station charges etc. Complete Job

Rebate on Old Parts

Vaibhav Engineers and Technocrates

GEETA ENGINEERING MECH WORKS

Vaibhav Engineers and Technocrates