REPAIR/REPLACEMENT OF EXISTING LT DISTRIBUTION SYSTEM AT SMQ AREA AND STREET LIGHTS WITH LED LIGHTS, HIGH MAST LIGHTS AND OTHER MISC WORKS AT AIR FORCE STATION SRINAGAR

Amount

Taking down unserviceable light fiting (HPSV/HPMV/HPMH/LED/Aviation lights from Pole/wall or any other location any capacity ,any height, any situation, repairs to the extent by removing connections from the system, checking of unserviceable spare parts and serviceable parts ,replacement of unserviceable parts with new spares and testing complete, tightening the loose connection and made item functional, reassembling the fitting and re-fixing/ re-hanging the same after repair in existing location or other location (as directed) including replacement of three core copper cable of suitable size and tesing complete all as specified and directed by Engineer-in-Charge. Note : (a) Spares required for repair (except connection cable) shall be measured and paid separately as supply only items here-in-after 2 to 13 and the cost of connection cable shall be deemed to be included in the quoted rates.(b) The contractor shall provide all type and safety equipment to electrician (c) In case any accident/injury of any person deputed by contractor, contractor shall be held responsible for setting all claims/compensation. (d) Contractor provide one vehicle and ladder as required site at 24 hours for repair of perimeter light/security light with one electrician and two helpers

Supply only Open construction copper wound ballasts 250 Watts suitable for HPSV/MH fitting etc of existing make and type complete all as specified and directed Engineer-in-Charge.

Supply only Open construction copper wound ballasts 150 Watts suitable for HPSV/MH light fitting etc of existing make and type complete all as specified and directed Engineer-in-Charge.

Supply only 250 watt HPSV/MH Lamps tubular type/double ended type etc of existing make and type complete all as specified and directed Engineer-in-Charge.

Supply only 150 watt HPSV/MH Lamps tubular type/double ended type etc of existing make and type complete all as specified and directed Engineer-in-Charge.

Supply only Ignitor/capacitor suitable for HPSV/MH fittings of capacity 150 to 250 watt etc of existing make and type complete all as specified and directed Engineer-in-Charge.

Supply only porcelain lamp holder thread/pin type suitable for HPSV/MH lamps 150 to 250 watt fittings complete all as specified and directed Engineer-in-Charge. Make: Havells/HPL/C&S

Supply only LED lamp 40 watt suitable B-22/E27 type lument out put 3400 lm color temp 6500K etc complete all as specified and directed Engineer-in-Charge. Make- Crompton/ Philips/Wippro

Supply only LED driver of capcity 15 Watt suitable for 240 volts complete all as specified and directed Engineer-in-Charge. Make- Crompton/ Philips/Wippro

Supply only LED driver of capcity 30 Watt suitable for 240 volts complete all as specified and directed Engineer-in-Charge. Make- Crompton/ Philips/Wippro

Supply only LED driver of capcity 50/60 Watt suitable for 240 volts complete all as specified and directed Engineer-in-Charge. Make- Crompton/ Philips/Wippro

Supply only LED driver of capcity 100 Watt suitable for 240 volts complete all as specified and directed Engineer-in-Charge. Make- Crompton/ Philips/Wippro

Supply only LED driver of capcity 150 Watt suitable for 240 volts complete all as specified and directed Engineer-in-Charge. Make- Crompton/ Philips/Wippro

Supply and fixing in repairs MCB SP 16 Amp 240 V and rupturing capacity 10 KA complete all as specified and directed Engineer-in-Charge. Make-Legrand/Havells/Schinder

S&F SMD LED flood light with pressure die cast aluminium housing complete with all accessores of capacity 60 watt complete all as specified and directed Engineer-in-Charge. Make Wipro Model No LF19-711-060-57-XX or equivalent in performance in Crompton/ Philips as approved by GE

S&F SMD LED flood light with pressure die cast aluminium housing complete with all accessores of capacity 100 watt complete all as specified and directed Engineer-in-Charge. Make Wipro Model No LF20-122-060-57-G2 or equivalent in performance in Crompton/ Philips as approved by GE

S&F SMD LED flood light with pressure die cast aluminium housing complete with all accessores of capacity 150 watt complete all as specified and directed Engineer-in-Charge. Make Wipro Model No LF20-192-060-57-G2 or equivalent in performance in Crompton/ Philips as approved by GE

S&F powder coated pressure die cast aluminium SMD LED street light with heat resistance tounghned glass with lens and dimming driver (1V-10V DC indput control voltage for 10% to 100% dimming of capacity 70 watt etc complete all as specified and directed Engineer-in-Charge. Make Wipro Model No LR02-781-XXX-57-G2 or equivalent in performance in Crompton/ Philips as approved by GE

S&F powder coated pressure die cast aluminium SMD LED street light with heat resistance tounghned glass with lens and dimming driver (1V-10V DC indput control voltage for 10% to 100% dimming of capacity 100 watt etc complete all as specified and directed Engineer-in-Charge. Make Wipro Model No LR02-112-XXX-57-G2 or equivalent in performance in Crompton/ Philips as approved by GE

S&F decorative post top lantern 60Watt for 360 C indirect light resistant to impact and corrosion, Glare free and better uniformity IP-65 protection miliky version with all accessories complete all as specified and directed Engineer-in-Charge. Make Wipro Model No LP07-671-XXX-57-CL or equivalent in performance in Crompton/ Philips as approved by GE

Excavation in trenches n.exc 1.5 M wide and n.exc 1.5 M depth and getting out for laying of cable etc in any type of soil complete all as specified and directed Engineer-in-Charge.

Returning, filling in, including spreading, leveling watering and well ramming in layers n.exc 25 cm thick in any type of soil complete all as specified and directed by Engineer-in-Charge.

Removing of excavated soil to a distance n.exc 50 mtr and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed Engineer-in-Charge.

M&L for sand cushioning in trenches spreading and consolidation 8 cm thick before laying the cable and 15 cm of the sand after laying the cable but will be measured 18 cm after punning etc complete as specified and directed.

M&L for laying of bricks well burnt sub class B (old pattern) laid flat for cable protection width equal to the length of bricks complete all as specified and directed

Supply, laying, jointing, testing in repair XLPE insulated PVC sheathed with stranded aluminium conductor heavy duty, conforming to IS 1554 Part I / ISI marked, including cable glands , cable lugs etc as suitable to the cable size, cables to be laid in trenches, fixed along the poles bare or through GI pipe laid under floors road etc fixed concealed in walls encased in GI pipe etc complete of following sizes OF Make : NICCO/HAVELLS/PLAZA/KALINGA :-

16 sqmm 4 core

25 sqmm 4 core

35 sqmm 3.5 core

Supply and fixing in repair galvanised iron tube ` light grade' for protection of copper strip at wall and duct/road/trench for 32 mm dia of pipe complete all as specified and directed Engineer-in-Charge. Make: JINDAL/BST/PRAKASH SURYA

Supply and fixing in repairs Junction box factory made of mild steel 1.6 mm thick of size 300 mm x 250 x 200 mm including 04 Nos alunimum bus bar of 3 mm thick duly fitted on the suitable insulator with fixing arrangement and including SP MCB 6 Amps clamped with pole/fixed on wall and taking out old unserviceable boxes complete all as specified and directed by the Engineer-In-Charge. Make: L&T/HPL/Sintex/Havells/Hensal

Supply and fixing in repairs repairs for two run single core zero halogen flame retardant insulated cable 2.5 Sqmm with unilay copper conductor and drawn through pole from junction box to street light connection, complete all as specified and directed by Engr-in-Charge. Make: HAVELLS/FINOLEX/GLOSTER/PLAZA

Supply and fixing in repairs 10 sqmm twin core insulated screened PVC bedded un armoured service wire with aluminium conductor complete all as per specified and directed by Engr-in-charge. Make: HAVELLS/FINOLEX/GLOSTER/PLAZA

Supply & fixing in replacement GI brackets made of 40 mm nominal bore GI pipe medium grade of required length not less than 1.5 M long, mounting brackets made out of Mild steel FI 40x6 mm of required shape ( two Nos) duly fitted with Mild steel nuts, bolts and washers and painting with two coats of synthetic enamelled paint over one coat of red oxide Zinc chrome primer and fixed to pole / walls etc complete all as specified. Make of pipe: JINDAL/BST/PRAKASH SURYA

S&F sheet metal enclosure for DB SPN 2 ways, 240 V complete fixed properly on pole/wall with suitable size MS flat iron with nut bolts washer etc complete as specified and directed. Make : Legrand /Schiender/Seimens

M&L for painting of steel tubular poles approximately 7/7.50 meter above GL in height including cross arms and bracings with two coat of aluminium paint painting with black & white alternate strips of 30cm each externally from ground level up to 1.5 mtr with synthetic enamel paint including numbering of the pole in yellow and black paint in circle of 10cm dia complete all as specified and directed.

Lowering the high mast light from height of 16 to 25 mtr and repairs to the extent by removing connections from the system, checking of unserviceable spare parts and serviceable parts ,replacement of unserviceable parts with new spares and testing complete, tightening the loose connection and made item functional, reassembling the fitting and re-fixing/ re-hanging the same after repair in existing location and tesing complete all as specified and directed by Engineer-in-Charge. Note : (a) Spares required for repair shall be measured and paid separately as supply only items(b) The contractor shall provide all type and safety equipment & other tools required at site to electrician for maintenance of light (c) In case any accident/injury of any person deputed by contractor shall be held responsible for setting all claims/compensation. (d) all other item also included in the works which not catered in items

Supply only gear box as per existing size, capacity and make

Supply only motor as per existing size,capacity and make

Supply only controll switch as per existing size, capacity and make

Note for srl item no.34to 37 : High mast light should only be got repaired from the authorised rep of company and spares shall be of the same make and model as per existing.

Periodical checking, adjustment tuning, calibration & testing of various equipment in main receieving station '90B OMQ, MLH' for following complete all as specified and directed.: (a) Microprocessor based over current & earth fault relay (b) Integrated power & Trivector (c) Breaker control switch (d) Local remote switch (e) Closing coil/Triping coil (g) Electronic bell (h) Indicator lamp (j) Electronic buzzer (j) MCB SP/SPN (n) Ratchet assembly butterfly (o) Spring charging motor assembly (q) Auxiliary spering (r) Auxiliaray switch (s) Master trip relay 86 (t) DC fail relay 80 (u) Vacuum interrupter (v) other accessories

Note:Repairing and replacement of VCB shall only be carried out by company dealer in srinagr and periodic cheking of VCB shall be carried out on required basis. The test reports of the equipments in proper formate to be submitted monthly by the contractor to the department

Periodical checking, adjustment tuning, calibration,Replacement of spare parts & testing of 11000V AVR in 90B grid complete all as specified and directed.. a) Carbon Roller Assy. b) Tag & Tail Assy. c) PCB Relay (1003) d) Flip Flop e) Time Delay Relay f) Limit Switch (B4C) g) Motor 40 kg h) Power Contactor i) Aux Contactor 7NO+1NC 71W, 230V AC j)Aux Contactor 4NO+4NC 44W, 230V AC k) Aux Contactor 6NO+2NC 62W, 110V AC 62W, 110V AC

Note: Repairing and replacement of AVR shall only be carried out by company dealer in srinagr and periodic cheking of AVR shall be carried out on required basis and The test reports of the equipments in proper formate to be submitted monthly by the contractor to the department

Connecting of HT fuse in any location any height, north side and south side of runway complete all as specified and directed.

Restreching LT OH/Lines ACSR conductor of any type and size including disconnecting binding wire on insulator, rebinding properly to avoid tension, complete all as specified and directed by Engineer-in-Charge

Tightening of Nut bolts of Transformer and pouring of Transformer oil in Transformer and AVR any place complete all as specified and directed.

Identification of 11000 volts fault (HT) and rectification of 11000 volt fault jointing of 11000 volt cable any type and any size up to 240 sqmm including excavation and returning filling (jointing kit will be measured and paid saperately)

Note:-(a) Spare required for repairing (except connection of cable) shall measured and paid separatly as supply only itemshere in after and the cost of connection cable shall be deemed to be included in the quoted rates (b) The contractor shall provide all types of tools and equipment to electricians, Safety tools,ladder any type and also convance to electricians for early rectification of fault. (c) Contractor shall deploy (1 electrician and 2 helper for North side of runway and 1 electrician and 2 helper for south side of the runway) 24 hours every day (d ) In case of any accident/injury of any person deputed by contractor shall be held responsible for setting all claims/compensation. (e) If The Fault not rectified by the contractor with in four hours 500 ruppes panalty paid by contractor to department per fault.

Supply only items for 11000V Panel Board (Make-EASUN REYROLLE)

(a) Supply only Microprocessor based over current & earth fault relay with highset element event recording & current scanning /display feature make-EASUN REYROLLE type MIT103 (51RNB 2 O/C E/F relay) A suitable for 30 V to 110 V AC/DC

(b) Supply only Integrated power & Trivector port ser no-RS232 meter with communication port suitable for 11000 volts breaker panels make EASUN REYROLLE.

(c) Supply only Breaker control switch for 11000V breakers (T/N/C switch) Make Kaycee

(d) Supply only Local remote switch for 11000V breakers Make Kaycee

(e) Supply only Closing coil for 11000V VCB make EASUN REYROLLE

(f) Supply only Trippling coil for 11000V VCB make-EASUN REYROLLE

(g) Supply only electronic bell Model no-B50 as per sample

(h) Supply indicator lamp as per sample (red,yellow,blue,green,white)

(j) Supply only electronic buzzer as per sample

(j) Supply only MCB SP/SPN as per sample D2,D4,C-16,C6

(k) Supply only connector as per sample

(l) Supply only ammeter (0-750) with CTs (750/350/5A) as per sample

(m) Supply only motor belt as per sample

(n) Supply only ratchet assembly butterfly as per sample

(o) Supply only spring charging motor assembly as per sample

(q) Supply only auxiliary spering set as per sample

(r) Supply only auxiliaray switch as per sample

(s) Supply only Master trip relay 86

(t) Supply only DC fail relay 80

(u) Supply only Vacuum interrupter type WL3379M3+ Make- CG DISPNOS-65459

(V) Supply and Fixing1000V current transformer suitable for megawin VCB of Ratio 400/200/5A mach with as per existing CT 9Job including programming the VCB with MAKE EASUN REYROLLE Relay all ready fitted in panel.

Supply only items for 11000V panel board (Make - Megawin switch gear)

(a) Supply only Microprocessor based over current & earth fault relay with highset element event recording & current scanning /display feature make-seimens ( O/C E/F relay ) 75SR 1205-2JA77.ICAO/FF suitable for 30 V to 110 V AC/DC

(b) Supply only Closing coil for 11000V VCB

(c) Supply only Trippling coil for 11000V VCB

Supply and fixing11000V current transformer suitable for megawin VCB of Ratio 400/200/5A mach with as per existing CT 9Job including programming the VCB with SEIMENS MAKE Relay all ready fitted in panel.

Supply only following items for 11000V AVR ANDREW YULE KOLKATTA

(a) Carbon Roller Assy.

(b)Tag & Tail Assy

(c)PCB Relay (1003)

(d)Flip Flop

(e) Time Delay Relay

(f) Limit Switch (B4C)

(g) Motor 40 kg

(h)Power Contactor

(i) Aux Contactor 7NO+1NC 71W, 230V AC.

(j) Aux Contactor 4NO+4NC 44W, 230V AC.

(k) Aux Contactor 6NO+2NC 62W , 110V AC.

Supply only LT insulation tape of size 25mmx25mtr make- steel greep,

supply only HT insulation tape 15mmx100mtr suitable for 11000V

Supply only aluminum thimble of size 10sqmm

Supply only aluminum thimble of size 16sqmm

Supply only aluminum thimble of size 25sqmm

Supply only aluminum thimble of size 35sqmm

Supply only aluminum thimble of size 50sqmm

Supply only aluminum thimble of size 70sqmm

Supply only aluminum thimble of size 95sqmm

Supply only aluminum thimble of size 120sqmm

Supply only aluminum thimble of size 150sqmm

Supply only aluminum thimble of size 185sqmm

Supply only aluminum thimble of size 240sqmm

Supply only aluminum thimble of size 300sqmm Note: srl item no 48 to 61 shall be atken on charge after physical verification GE/Engineer-in-charge against proper receipt voucher

Supply,laying,jointing and testing of XLPE insulated PVC sheathed armoured under ground cable heavy duty with aluminium conductor LT 1100 V grade cross sectional area 120 Sqmm, 3.0 core, complete all as specified and directed by Engineer-in-Charge. Make:Havells/Polycab/NICCO/Plaza

Material & Labour for Replacement of Gang operated air break switch 11 KV , 3 Pole type, 4 insulator per phase, TP, outdoor type suitable for horizontal or vertical mounting, mechanical operated mounted on insulators and MS frame with operating mechanism worked from ground level for current rating 200 amps and comprising of :- (i) operating mechanism with 20 mm dia Galvanised mild steel medium grade pipe 5 to 6 M long operating handle with locking arrangement and with pad lock (ii) Channel base for mounting post insulator (iii) Easy replacement type MS arcing horn (iv) Multi built type contact for incoming / outgoing ACSR conductor non-ferrous post shall be electroplated and ferrous post shall be hot dipper (v) Drop out expulsion outdoor type fuse link suitable for 11 KV laid galvanised iron channel based with post type insulator and fuse element. Make:Jaipuria Bros/BHEL/ABB/Andrew Yule

Material & Labour Mild steel cross arms, bracings, supports, clamps, and back plates fabricated from structural steel sections including nuts, bolts, washers , welding, bending, cold or hot , drilling holes for bolts , in any shape or size as indicated or directed and inclusive of one primer coat with red oxide Zn Chrome and two coats of aluminium paint complete all as specified and directed by Engineer-in-Charge.

Material & Labour for Cable jointing kit for 11KV (Earthed grade cable for indoor trermination heat shrink type joint complete with jointing material and accessories suitable for 3 core 95 sqmm complete all as specified and directed by Engineer-in-Charge. Make: Denson/MSeal/Raychem/Jaipuria

Material & Labour for Cable jointing kit for 11KV (Earthed grade cable for indoor trermination heat shrink type joint complete with jointing material and accessories suitable for 3 core 120 sqmm complete all as specified and directed by Engineer-in-Charge. Make: Denson/MSeal/Raychem/Jaipuria

Material & Labour for Cable jointing kit for 11KV (Earthed grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core 95 sqmm complete all as specified and directed by Engineer-in-Charge. Make: Denson/MSeal/Raychem/Jaipuria

Material & Labour for Cable jointing kit for 11KV (Earthed grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core 120 sqmm complete all as specified and directed by Engineer-in-Charge. Make: Denson/MSeal/Raychem/Jaipuria

Supply and connect battery for battery bank 12 volts 180 Ah maintinance free battery complete all as specified and directed by Engineer-in-Charge. Make:Exide/Amaron/Bosch

Note for all items: (i) All repair work shall be carried out only by authorised person qualified in the relevant trade (ii) Make of components replacement if not specifically mentioned in the relevant item/List Of Make same shall be of the existing make.

M/S GHULAM HASSAN KUCHAY

M/S Sky Engineers

M/s Jaipal Associates