Karnataka

Active

Works

Water supply/sewage lines

Providing and Constructing LWM Unit at Murgod Village in Saundatti Tq

Rural Drinking Water and Sanitation Department

RWSSD Division Office Belagavi | Belagavi, Karnataka

Amount: ₹52.6 LCloses: 9 Jul 2026Due tomorrow

Tender Value

₹52.6 L

EMD Value

₹1.1 L

Closing Date

9 Jul 2026, 10:30 pmDue tomorrow

Tender Inviting Organisation

Name

Rural Drinking Water and Sanitation Department

Work Description

Providing and Constructing LWM Unit at Murgod Village in Saundatti Tq

Tender Information

Tender ID

RWSSD/2026-27/WS/WORK_INDENT10240

Reference Number

RWSSD/2026-27/WS/WORK_INDENT10240

Tender Type

Open

Product Category

Water supply/sewage lines

Location

RWSSD Division Office Belagavi

Source Website

Subscribe to view

Documents Required

10 documents required · 10 mandatory

Technical Bid

RequiredPWD Department The Tenderer should possess valid registration Certificate as mentioned in KW docu

RequiredPAN CARD COPY

RequiredGST REGISTRATION COPY

RequiredWork done certificate details as mentioned in KW docu certified by an officer not below the rank of Executive Engineer

RequiredUnconditional line of credit from Banker of a nationalized Bank Scheduled Bank liquid assets as mentioned in KW docu

RequiredAnnual Turnover Certificate with UDIN NO

Requiredongoing work The Tenderer must submit ongoing work commitments certified by an officer not below the rank of Executive Engineer to compute available tender capacity

Requiredtender capacity Tenderer must have assessed available tender capacity as per formula in KW documents

RequiredAccurate Postal address and Phone /Mobile Number

RequiredQUANTITY WISE WORKDONE certified by an officer not below the rank of Executive Engineer

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

Corrigendums modifications correction if any will be published in the website only.

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Acceptence / Cancellation of the works are reserved by under signed without any reasons for the same..

All the scanned documents pertaining to bidder to be uploaded shall be in original and same originals should be produced to the Executive Engineer (at the time of Technical Bid Opening) who reserves right to verify the orginal documents before approval.

To qualify for award of this contract, each tenderer should give all details and documents as per Technical and Financial bid attached to this tender.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

All the materials to be utilized for the work must be tested in authorised labs and quality control test reports must be enclosed to the bills. All types of pipes and pumping machineries with Accessories and other materials must be tested by third party agencys. Cost of all QU tests must born by contractor

If any date in the tender time table is government holiday, next working date will be considered

Incomplete / conditional tenders will not be accepted.

Tenderer must submit his present accurate postal address and phone / cell phone number

The tender may be cancelled at any stage without assigning any reason

The rates of items are inclusive of cost of materials, labour charges, HOM of machinery, all lead and lifts and all other charges to complete the work successfully as per specifications and as directed by engineer in charge of work

The tenderers must submit the scanned documents in pdf / jpeg form, not in other form.

Any objection regarding the tender must be submitted directly to Executive Engineer , not in inward.

For interpretations of clauses, conditions, spelling mistakes, etc., decision of Executive Engineer, RDW&S, Belgaum is final. and Binding

Bidder should Submit only unconditional Line of Credit in the prescribed format only from the Bank

Third party consults may be engaged for checking quality and quantity of work and to prevent any misuse. proper reporting methods trough these agencies and their comments to be reviewed addressed immediately at district level. quality of work is of most importance.

As per Karnatka State Government order LD/300/LET/2006 Blore dated 01.01.07 and Government letter No.PW/134/BMS/2007 dated 27.07.07, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare Fund. & Royalty on construction materials and other taxes will be deducted as per prevailing Govt Orders

Materials like pipe, CI pipe, cement aggregate sand etc., required for the work shall be procured by the tenderer themselves and shall be of standered quality as per IS specifications and should get tested by the quality control authority before used to the work at his own cost.

The work should be carried out in accordance with the standard specifications specified by the department.

The work should be executed strictly as per the tender specification mentioned. Contractor should arrange for quality check at different stage of work for quality assurance as per direction of Engineer-in-charge during the work in progress and after completion. If any failures found the cost will be recovered from the contractor and will be recommended for black listing immediately.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent

Royalty on construction materials and other taxes will be deducted as per prevailing Govt Orders.

Tenderers must have valid PWD registration and must submit PWD registration copy Class III & above

Achieved in at least two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs.105.28 Lakhs(The Consolidated Annual Financial turnover certificate for the relevant financial years certified by an ICAI registered Chartered Accountant along with UDIN number (also the audited financial statements for each of the financial years to be submitted). The certificate should be affixed with the seal of the office of the Chartered Accountant with the registration number and duly notarized by Notary Public.).

Satisfactorilycompleted(at least 90% of the contract value), asPrimeContractor atleastone Similar nature of work (UGD/Canal)ofvaluenotlessthanRs.26.32Lakhsnot less than 50% of estimated value of contractcertified by an officer not below the rank of Executive Engineer

The Tenderer should submit the Unconditional line of credit from Banker of a nationalized Bank / Scheduled Bank / liquid assets i.e. of Rs.15.79 Lakhs

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Past Experience

Executedatleast any three of the following minimum quantities of works: Pipeline work CI/MS/DI/ PVC/HDPE/GI of atleast 14.88Mtr lengthnot less than 80% of estimated length as per DPR.Earthwork excavation of atleast 1535.84Cum not less than 80% of estimated volume as per DPR. Concrete work of atleast 202.75Cum not less than 80% of estimated volume as per DPR TMT FE550/550D of atleast 12177.36 KG 80% of estimated volume as per DPR

Work Done Certificate

Satisfactorilycompleted(at least 90% of the contract value), asPrimeContractor ,atleastone Similar nature of work (UGD/Canal)ofvaluenotlessthanRs.26.32Lakhsnot less than 50% of estimated value of contractcertified by an officer not below the rank of Executive Engineer

Work Done Certificate

Capabilities of Vendor

Tenderer must have assessed available tender capacity as per formula in KW documents

Others -- TENDER CAPACITY

GST Registration copy

GST Registration

PAN Card copy

ITR Filed Copy (Mentioning PAN)

The Tenderer should possess valid registration of appropriate Class with PWD Department of Class III and Above

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

Achieved in at least two financial yearsa minimum financial turnover (in all classes of civil engineering construction works only) of Rs.105.28Lakhs.(usually not less than two times the estimated annual payments under this contract The Consolidated Annual Financial turnover certificate for the relevant financial years certified by an ICAI registered Chartered Accountant along with UDIN number (also the audited financial statements for each of the financial years to be submitted). The certificate should be affixed with the seal of the office of the Chartered Accountant with the registration number and duly notarized by Notary Public.

Audited CA Certificate of Annual Turnover

Liquid assets and/or availability of credit facilities of not less than Rs.15.79Lakhsthe equivalent of the estimated cash flow for three months in the peak construction period through submission of unconditional Credit line/letter of creditcertificates from banks for meeting the fund requirement etc.

Line of Credit

Others

Accurate Postal address and phone / Mobile Number

Others -- Accurate Postal address and phone / Mobile Number

The Tenderer must submit ongoing work commitments (certified by an officer not below the rank of Executive Engineer) to compute available tender capacity

Others -- ongoing works

Fee & Financial Details

Tender Fee Amount

₹1,320

EMD Fee Amount

₹1.1 L

Important Dates

Last Activity

30 Jun 2026

Published

30 Jun 2026

Bid Opening

10 Jul 2026

Download Ends

9 Jul 2026

BOQ Preview

•

Inline Treatment- Outflow Point-01

•

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Cement Concrete for all Sub structures ofbuilding, Irrigation works, Sub structure works of bridges, Drain works &other parallel works from 0.50m to 3.50 m height. The...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

Galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equip...

•

Supplying UNPLASTICISED PVC pipes conforming to IS 16098:2013with latest amendments ended with integral sockets with ISI mark andconveying to worksite, rolling and lowering into trenches, laying true ...

•

Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications. stone pitch...

•

Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...

•

40mm downsize aggregate with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for...

•

20mm downsize aggregate with all lead, lifts, loading & unloading charges including cost and conveyance of all materials, labour, equipments, HOM of machinary and other incidental charges required for...

•

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

•

Providing and fixing of typical Logo board as per specifications and drawing. Two ACP Sheet of 3mm thick, top and Bottom plate duly welded/bolted with MS Square angle 25mm x25mmx 5mm size on back and ...

•

Inline Treatment- Outflow Point-02

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Noti3.pdf

Others - NOTIFICATION • 1.69 MB

Murgod 10240 KW3 GEN.docx

Tender Document • 0.41 MB

Ready to Participate?

Download all tender documents and submit your bid