SPECIAL REPAIR TO JCO/OR MD ACCN AT BLDG NO DM 9/1 DM 9/2 DM-9/3 AND DM 9/4 OF NCC DTE (NER) SHILLONG AND SPECIAL REPAIR TO OFFRS MESS GUEST ROOM BLDG NO P 154 AT NCC DTE NER SHILLONG UNDER GE SHILLONG

Amount

AGE B/R SCHEDULE PART - I Dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specifed and as directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area n exc 1.5 sqm each all as specified.

Taking down chowkats but with shutters (without taking off shutters from frames) exc 1.5 Sqm but n exc 4 Sqm each complete all as specifed and as directed.

Demolition of concrete of any description in any position not otherwise specifically provided for complete all as specifed and as directed.

Demolition and breaking up drain pipes 150mmdia (salt glaged stone ware AC or reinforced concrete pipe set in cm) complete all as specifed and as directed.

S&L ,2nd class soft wood plain soild, stright chowkats and frames, wrought, framed rebated on thesolid, rounded or chamfered, put togeather with glue pinned at joints complete all as specifed and as directed.

M&L for Non Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed.

M&L for Non Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM (1:6). complete all as specified and directed.

M&L for Glazed ceramic colour tiles in vertical surface of size 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour including Screed bed or bedding layer of mortar 10 mm thick for vertical faces in CM (1:4) complete as specified and directed

S&F 30mm thick 2nd class hard wood skelton shutters open rebated and prepare to receive glass, gauze, etc complete all as specified and directed

S&F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm complete all as specifed and as directed.

M&L for 18/19 mm thick Prelaminated particle board,interior grade, prelaminated both sides with decorative choice laminations completed all as specified and directed.

M&L for Tower bolt, brass, of size 75mm complete all as specifed and as directed.

M&L for Bow Handle, brass, of size 100mm complete all as specifed and as directed.

S&F Continuous (Piano) hinges, brass, width of flaps 30 mm (when open) complete all as specifed and as directed.

S&F Magnet catches for cupboard shutter, brass body and striking plate including letting in all as specified and as directed

S&F Vitreous china wash down water closet pan padestal pattern white, excluding fixing bolts, flushing cistern but including flush pipe, seat and cover complete all as specified and as directed.

S & F Vitreous china squatting pan of pattern 'long pan' size 580 mm white with 'P' or 'S' trap front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete all as specifed and as directed.

S&F PVC valveless, 10 ltrs, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified.

S&F PVC (SWR) 110mm bore bends any radius with access door complete all as specifed and as directed.

S&F PVC (SWR) 75mm bore bends any radius with access door complete all as specifed and as directed.

Dismantling water tanks exc 500 ltrs but not exc 1000 ltrs capacity , complete all as specified

Demolition of Brickwork or stone/boulder masonry or precast concrete block walling, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework built in cement mortar complete all as specified.

Supply and fixing rotational moulded HDPE water storage tank ,double layer ,ISI marked (cylendrical vertical type with closed top) of capacity 500 ltrs in position incl float valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed all as specified and directed.

Cutting chases,pining in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing steps, cills, sunshades ,shelves,lintels,etc.; and cutting chases for concealed water tubing or concealed conduit,wiring,etc,and making good cutting not exceeding 10 cm girth in brick walls. complete all as spd

S&F in repair Concealed stop cock, Chromium plated, 15 mm, all as specified and directed

S&F PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specifed and as directed.

S&F 15mm bore Bib taps, cast copper alloy fancy type , screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F Grating doom 100 mm dia of PTMT.(Minimum weight 25 gms) complete all as specifed and as directed.

M & L for complete removal of existing treatment of walls including cornices, pilasters etc and applying two coats of distemper oil emulsion over a coat of 1 mm thick wall care putty and one coat of wall primer and complete all as specified and directed.

M&L for for applying two or more coats (over 1 mm thick plaster of paris wall care putty) of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surface on external surfaces including complete removal of existing treatment over wall and preparation of surfaces even and smooth complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm in width or girth and treated with one coats of synthetic enamel paint complete all as specified and directed.

Taking up or down steel tubing and connections of 15mm/bore complete all as specified and as directed.

All as per item No 34 above but 20mm or bore of pipe complete all as specifed and as directed.

S&F G.I. pipe 15mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors complete all as specified

S&F G.I. pipe 20 mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors complete all as specified

Taking down plastering on lathing (other than wire-netting, without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered) complete all as specifed and as directed.

M&L for Rendering 15mm thick on fair faces of concrete surface of wall in two layer with top 5mm thick mixing with WPC @ 3% by weight of cemet or a backing coat of 10mm in CM (1:4) finished even and smooth without using extra cement all as specified and directed. Note : WPC shall be meaasured and paid seperately as supply only.

M&L for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface even and smooth without using extra cement complete all as specifed and as directed.

M & L for preparation of new walls surface and applying two coats of distemper oil emulsion over a coat of 1 mm thick wall care putty and one coat of wall primer and complete all as specified and directed.

Supply only Integral water proofing compound

M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specifed and as directed.

Dismantling wall and ceilling bords of any description including cover fillets complete all as specifed and as directed.

M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws as in ceiling complete, complete all as specified and directed.

S&F Anodised Aluminium frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mm c/c using GI hangers of 6mm dia GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

Dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof covering complete all as specified and as directed .

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Dismantling boarding any description fixed in any position with nails complete all as specified and directed

S&F 2nd class HW boarding 20mm thick fixed with nails in eaves board plained one side with butt joint complete all as directed.

Dismantling of timber scantling 40 sqcm over in section in any position (unframed work) complete all as specified and as directed .

M&L 2nd class hard wood in scantling clean sawn timber fixed all as specified.

Dismantling wrought Iron or mild steel work of any description not other wise described complete all as specified and directed.

S&F Mild steel joist channel or angle or tee section,ms tube and fixed with ms flat iron cut into shape drilled and fixed with screw conforming fe 410 complete all as specified and as directed .

M&L 100mm thick cement concrete using (40mm graded aggregate) type D-2 (1:4:8) as in sub base complete all as specified and as directed .

M&L for chequered cement concrete tiles 300mm x 300mm x 25mm thick, set, jointed and pointed in neat cement slurry with gray cement and pigment in floors over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes incl bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460 mm bowl size 410mmx360mmx160 mm complete all as specified and as directed .

S&F (20mm curtain rail) harrison rails, aluminium anodised alloy, with fixing brackets, stops, rollars etc 20mm dia complete all as specified and as directed

S& F of brackets decorative (Latto) for 20 mm dia curtain rails complete all as specified and as directed .

Dismantling of plain or corrugated steel sheeting any guage thickness including nainital or similar pattern roof covering all as specified.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below/above ground level) all as directed.

Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.

Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each all as specified

Demolition and breaking up drain pipes 100 mmdia (salt glaged ware AC or reinforced concrete) set in cement mortar complete all as specified and as directed .

M&L plain fillets square rectangular or triangular in section bullnosed,splayed, chamfered or rounded on one edge or face secured with nails or brads (2nd class hard wood) sectional area exc 13 sqm n exc 25 sqcm all as specified.

M&L 6mm thick plywood, grade BWR type BB fixed to timber frame work with nails complete all as specified and as specified.

M&L 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face on one side fixed with screws to timber frame work on wall all as specified and as directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed .

S&F Continuous (Piano) hinges, brass, width of flaps 40 mm (when open) complete all as specified and as directed .

S&F Extruded brass handles, 100 mm size, fabricated type, polished all as specified and as directed

M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and as directed

M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 complete all as specified and as directed

M & L Granite (of any type) work 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as spefied.

M&L for PCC 1:3:6 type C-2(using 20 mm graded cr. stone aggr),75mm thick as in plinth protection finished even and smooth without using extra cement layed in bays not exc. 2.00m and joints filled with bitumen sand mastic with ratio (1:3 ) complete all as specified and as directed .

M&L for 25 mm thick cement concrete 1:2:4, Type B-0 (12.5mm graded aggregate) as in floor for tiles and pcc padding all as specified.

S&F PVC gutter , half round, 180mm size complete all as specified and directed.

S&F End cup support brackets for PVC pipes (half round) complete all as specified and directed.

S&F PVC Tee, 180mm complete all as specified and directed.

S&F PVC Reducer, 180mmx110mm complete all as specified and directed.

M&L for preparation of new or previously untreated surface of steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.

M & L for PCC 1:3:6 C2 (40 mm graded aggregate) as in surface channels and drains all as specified & directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms,moulds,mitred/ stop ends

M&L for Use and waste of Formwork to faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter , all as specified.

M&L Precast cement concrete block masonry with solid block exc 10 Cm in width with PCC, type C1 (1:3:6) using 20mm graded stone aggregate) and setting in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L Precast cement concrete block masonry with solid block 10 Cm thick with PCC, type C1 (1:3:6, using 20mm graded stone aggregate) (with plain or interlocking joints and setting in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 15mm thick on fair faces of concrete surface of wall in CM (1:4) finished even and smooth without using extra cement all as specified and directed

M&L Rendering 10mm thick on concrete surface of wall in CM (1:6) and finished the surface fair & even without using extra cement , complete all as specified and as directed

M&L for preparing surfaces plastered or unplastered, applying two or more coats (over 1 mm thick plaster of paris wall care putty) of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surface on new or previously untreated surfaces all as specified and directed.

M&L for Complete removal of existing treatment, preparing surfaces plastered or unplastered, providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and Distempering two or more coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.

S&F 2nd class hard wood plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.

S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed .

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted without and mitred beads for securing glass or gauge etc all as specified in SSR Pt 1sec-8.24(a) all as specified.

M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed .

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforcement with M.S square tube, supplying & fixing in openings complete all as specified and as directed .

S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm complete all as specified and as directed .

S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 75mm complete all as specified and as directed .

S&F Extruded Aluminium, anodised, bow handles of size 150mm complete all as specified and as directed .

S&F aluminium anodised barrel bolts and fixed of 200 mm length complete all as specified and as directed .

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width aperture 1.40 mm and fixed with stainless steel wire staples

S&F Aluminium alloy, anodised sliding door bolts(300mm long) with hasp,staples ( bolt type) and fixing clip of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified.

M&L Aluminium anodized frame Powder Coated (minimum thickness of powder coating 50 micron) for doors , windows , ventilators with one or more rebates incl joing cleat for fixing etc complete all as specified

S&F Anodised aluminium window and ventilator shutters, Powder Coated (minimum thickness of powder coating 50 micron) side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S&F anodised door shutters , Powder Coated (minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified

S&F Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beadingcomplete all as specified and directed

M&L 12mm thick prelaminated particle board, interior grade prelaminated both side with decorative choice laminations ,fixed with screw etc complete all as specified.

S&F in repair Aluminium extruded section door closer hydraulially regulated, designation No 3, universal type suitable for door shutter of 851 to 1000mm width and of weight of between 61 to 80 kg and fixed all as specified (ISI Marked)

S&F in repairs brass mortice lock, vertical type size 100mm 2 levers complete all as specified and as directed .

S&F in replacement of rotational moulded polyepolyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs incl taking down old unservicable tank of any capacity all as specified and directed

S&F in repair float valve of size 20mm, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe all as specified and directed

S&F 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified

S&F 20mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete.

S&F in repairs Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for following bore of pipe including taking down old existing unserviceable gate valve of dia 20 mm complete all as specified and directed by Engr-in-Charge

S&F PVC (SWR) Pipes single socketed in any length with rubber ring joints, 110 mm bore fixed to walls complete as directed

M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete

S&F PVC (SWR) bends 110mm dia complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia complete all as specified and as directed

S&F PVC(SWR) 75mm dia vent cowls

M&L for vitrified coloured external paving tiles of size 30cm x 30cmx 9/10mm thick set, jointed & pointed in neat cement slurry with grey cement and matching coloured pigment in floor over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates including distance pieces, cleats, plates, welding/rivets/bolts etc complete all as specified.

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof.

S&F in repairs of Venetian blinds of wooden finished material width of 50 mm and thickness of 5 mm and size as per direction of Engr-in-charge

S & F in repairs Vitreous China EWC including seat cover closed pattern single piece size 755x365x655 complete of make Jaguar Cat Part No :- LYS-WHT-38851PSM or equivalent in make cera, parryware or Hindware

S&F in repairs vitreous China clay table top WHB of make Jaguar Cat Part No:-ARS-WHT-39601 of size 635x430x190 mm incl waste coupling Cat Part No:-ALD-727 complete or equivalent in Hindware/Cera/Parryware

S&F in repairs Brass CP 2-in-1 Bibcock with flange of make Jaguar Cat Part No:-ORP-10041PM OR equivalent in Marc/Cera/Parryware

S&F in repair fancy type tall body with 155 mm extension body fixed spout without popup waste system with 600 mm long braided hoses of make Jaquar Cat Part No:- KUP-35005BPM or equivalent in Marc/Parryware/Prayag

S&Fin repairs 15 mm bore CP health Foucet cock with Flexible pipe 1 m long of make Jaguar Cat Part No:ALD-565 or equivalent in Marc/Parryware/Prayag

S&F in repairs Soap dish holder of make Jaguar Cat Part No:-AKP-35731P or equivalent in Marc/Parryware/Prayag

S&F in repairs Toilet roll holder with stainless steel flap of Make Jaguar Cat Part No:- AKP-35753PS OR EQUIVALENT IN Marc/Parryware/Prayag

S&Fin repairs Towel ring sqare shape stainless steel of Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag

S&F in repairs corner glass shelf with bracket of make Jaguar Cat Part No:CAN-1173 or equivalent in Marc/Parryware/Prayag

S&F in repairs Brass CP angular stop cock fancy type with Capstan heads of make Jaguar/Marc/Parryware

S&F in repairs Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap and fixed complete all as specified and as directed .

AGE E/M SCHEDULE PART - II Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . PVC Conduit confirming to IS 9537 part I & III Note (All chases will be cut by chase cutter only) AMke of Cable - KEI/ Havells / Kalinga

Description all as per Srl item No. 137 above but for one bell point controled by one bell push .

Description all as per Srl item No.137 above but for socket outlet point 5 Amp on same board.

Description all as per Srl item No.137 above but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No 137 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fixing modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor, Vinay

Supply and fixing modular switch 1 way 16 A module 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor .

Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. ake : Cona , Plaza, Anchor, Vinay

Supply and fixing modular bell push 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. Make : Cona , Plaza, Anchor .

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type, warm white / white type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old one complete all spcified and directed.

S & F LED fancy Picture Mirror Light fitting warm white /white type 12 Watt complete with necessary connection complete all as specified and as directed .

S & F LED down lighter warm white /white type 12 Watt complete with necessary connection complete all as specified and as directed .

S & F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and making good disturbed surface of wall and outer wooden box for fan fix on wall including taking down old one complete all as specified and as directed .Make Bajaj/Havell's/CG.

Supply and fixing LED security Building light LED 25 Watt , pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light including taking down and old one complete all as specified and as directed .Make:- Bajaj Cat part No- 169821 LED/CG as perr vat No LSTO 25 CDL equivalent model as in Surya / havells .

Supply,laying, and testing XLPE cable insulated,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with starnded aluminium conductor of size16 sqmm 2 core complete all as specfied and directed.

Excavation in trenches n exc 1.5 mtr wide and depth n exc 1.5 mtr deep for foundation, laying GI pipes and UG cables etc n exc 10 sqmtr on plan, in hard/dense soil and getting out complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M & L for providing dry river sand as in sand cushioning to UG cable including punning gently complete all as specified and directed.

Removing excavated material not exc 50 mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M & L Sub class'B' old size well burnt brick laid flat in trenches as protection to LT cable complete all as specified and as directed.

Supply and fixing GI Tubing light grade under road, on pole floor and on wall for cable protection complete all as directed for following sizes 40 MM dia bore complete all as specified and as directed .

Supply and fix in repairs MCCB DB 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified. . (Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . Note : Copper thimble shall be used for connection of cable .

Supply and fix MCCB TPN, 240 Volts, 40 to 63 Amps, 10 kA rupturing capacity415 Volts complete all as specified and directed including taking down old one.

M & L for Sub main wiring with two runs of single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

M & L for Sub main wiring with two runs single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Cassing capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC casing / capping shall be measured as one RM.

Supply and fixing in repair to single phase digital electronic meters with LCD Display 5-60 AmpsMake HPL/ L&T including taking down old unserviceable meters to store and including connection and complete all as specified and directed as specified.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC Casing capping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately .

Description all as per Srl item No. 167 above but for one bell point controled by one bell push .

Description all as per Srl item No.167 above but for socket outlet point 5 Amp on same board.

Description all as per Srl item No.167 above but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No 167 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fix bell Push (ISI marked) Single pole 240 volts, 5Amps all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fix socket (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. Make- Havells/anchor/ Legrand.

Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and as directed .

S & F wall mounted LED batten fittings with all accessories 1X 9 Watt LED / foot light 6000K , extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed including taking down old unserviceable light fittings

S & F Wall bracket decorative LEDwith lamp 12 Watt complete with necessary connection including taking down old unserviceable one complete all as specified and as directed .

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation. complete all as specified and as directed . Make : Havells cat part no - GHWCAMTWH025 : /LG/Ronald.

S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia. Make: Prayag or equivalent in Polytuf/ Havells/ Sona.

S&F 15mm bore angle stop valve cast copper alloy, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixing complete all as specified and as directed .

Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down old one complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Schnieder/GE/C&S.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one. Make: Havells or equivalent in Schnieder/GE/C&S.

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.Make : Hager as per cat part- NCN106N, Schneider as per cat No : A9N4P32C or Indoasian as per cat No : 81195.

Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistranded aluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc , of size 16 Sq.mm 4 core , confirming to IS specifications complete all as specified and as directed .

MS HO Shadap

S K Construction