Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.3 LAccepted-AOC | ₹29.3 L | L1 | Accepted-AOC Accepted |
| 2 | L2₹29.7 LRejected-Finance | ₹29.7 L | L2 | Rejected-Finance Recected |
| 3 | Rejected-Technical | - | - | Rejected-Technical non resposnive |
Tender Value
₹30 L
EMD Value
₹3 L
Closing Date
9 Feb 2026, 12:00 pmClosed
EE, CD-2, PWD, BULANDSHAHR
EE, CD-2, PWD, BULANDSHAHR
Repair and improvement work in Inspection House Dibai in Dibai Block of Bulandshahr District
2026_CEMRT_1111467_1
159/7A Date 17.01.2026
Open Tender
Civil Works - Buildings
180 days
EE, CD-2, PWD
Please refer Tender documents.
3 documents required · 3 mandatory
₹944
₹3 L
Yes
EE, CD-2, PWD, BULANDSHAHR
7 Mar 2026
2 Feb 2026
9 Feb 2026
2 Feb 2026
9 Feb 2026
2 Feb 2026
3 Feb 2026
Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. As per DSR S. No.15.30 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). aper DSR S. no. 5.3 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. As per DSR S. no. 5.22A.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. As per DSR S. No. 15.56 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. As per DSR S. No. 14.17 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
12 m.m. thick plaster with cement and fine sand of 1.25 fineness modules in 1:4 (1 cement: 4 coarse sand) over brick work minimum thickness not to be less than 1 cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work as per DSR S. No. 13.4.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With Modular bricks as per DSR S. No. 6.3.2 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
12 m.m. thick plaster with cement and fine sand of 1.25 fineness modules in 1:6 (1 cement: 4 coarse sand) over brick work minimum thickness not to be less than 1 cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work as per DSR S. No. 13.4.2 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below as per DSR S. No. 15.12.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. as per DSR S. No. 9.5.1.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading as per DSR S. No. 9.7.8 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Varnishing with varnish of approved brand and manufacture : Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish as per DSR S. No. 13.67.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete as per DSR S. no. 13.26 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. As per DSR S. No. 13.80 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer as per DSR S. No. 13.41.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm as per DSR S. No. 13.45.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per DSR S. No. 13.62.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. As per DSR S. No. 15.25 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm as per DSR S. No. 11.49.2 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. as per DSR S. no. 11.37A Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: a) after surface preparation, first layer of slurry of cement © 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg!sqm. b) laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. c) third layer of 1.5 mm thickness consisting of slurry of cement © 1.289 kg/sqm mixed with water proofing cement compound © 0.670 kg!sqm and coarse sand © 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately For the purpose of measurement the entire treated surface will be measured. DSR Item Code: 22.6 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. 10 litre (full flush) capacity-white as per DSR S. No. 17.19.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: As per DSR No. 17.25.2 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing & fixing white P.V.C waste pipe for wash basin including P.V.C waste fittings complete As per DSR No. 17.28.2.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing & fixing 600x450mm bevelled edge mirror of superior glass of approved quality Atul or Equivalent complete with 6mm thick hard board ground fixed to wooden cleats with cp brass screws & washers complete As per DSR No. 17.31
Providing & fixing G.I. pipes B class Jindal or equivalent complete with G.I. fittings & clamps, including cutting & making good the wall etc for internal work including testing etc complete As per DSR No. 18.11.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing & fixing G.I. pipes B class Jindal or equivalent complete with G.I. fittings & clamps, including painting with anti-corrosive bitumastic paint,cutting & making good the wall etc for internal work including testing etc complete As per DSR No. 18.11.2 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. as per DSR S. no. 4.17 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required As per DSR No. 17.2.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and fixingwhite vitreous china wash basin including making all connection but excluding the cost of fitting comp as per direction engineer incharge. Flat back Wash basin size 630x450 mm As per DSR No. 17.25.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia (semi rigid pipe) As per DSR No. 17.28.1.2 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and fixing toilet paper holder standerd size ISI marked CP brass as per direction engineer in charge SI No. 17.34.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and fixing GI pipes b class jindal or equivalent complete with gi fitting and clamps including cutting and making good the walls etc. internal work concealed pipe incl. painting with anti corrosive bitumastic paint comp as per direction engineer in charge 15 MM Dia nominal bore SI No. 18.11.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore SI No. 18.49.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.15 mm nominal bore SI No. 18.50 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore SI No. 18.52.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confoming to IS:8931 15 mm nominal bore SI No. 18.53.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 300 x 16 mm S.no. 9.96.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete:300 x 10 mm S.no. 9.97.1 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:125 mm S.no. 9.100.1 New item Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and fixing 1st marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete:75x45x3.2 mm S.no. 9.95.8 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 2023 18.48 Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Supply & Fixing of Informatory sign board at site i/c all comp at site. Including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
Tendernotice_2.pdf
PDF • 1.14 MB
BOQ_2053588.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid